Hi everyone,this is my first tread and I hope someone can help me.
I've just bought a T-Mobile MDA VARIO in USA that is Unlock,because it read me differens SIMs with no problem, but I want to know if is also CID - unlocked because I want to put in, afterwards, the ROM with the italian language.
What I have to do to look if is CID locked or not?
thank you for your time
Mick
mickscores said:
Hi everyone,this is my first tread and I hope someone can help me.
I've just bought a T-Mobile MDA VARIO in USA that is Unlock,because it read me differens SIMs with no problem, but I want to know if is also CID - unlocked because I want to put in, afterwards, the ROM with the italian language.
What I have to do to look if is CID locked or not?
thank you for your time
Mick
Click to expand...
Click to collapse
Ciao,
this is what you have to do:
1) Check whether your phone is G3 or G4 (reset and look at IPL/SPL version: 2.xx.0001->G4; 2.xx->G3)
2) If it is G4: you cannot CID unlock it. To install a different rom, then, you must follow this tutorial: http://forum.xda-developers.com/showthread.php?t=271043
3) If it is G3 AND rom version is >= 2.21 (equal or greater than 2.21): cannot be CID unlocked, use the same tutorial as for G4.
4) If it is G3 AND rom version is < 2.21 (minor than 2.21): follow this thread http://forum.xda-developers.com/showthread.php?t=263116 to learn how to downgrade the rom and CID unlock the phone.
bye
MDA ROM Questions
Thank you, Risidoro, for the excellent advice.
I have a couple of follow-up questions:
Background: My T-Mo (USA) MDA has SPL/IPL 2.26, OS 2.26.10.2 (determined as per your advice). I'd like to install a different "unrestricted" ROM (mainly to get access to JAVA and to impove performance).
Here are the questions:
1. The current ROM (2.26) is not the original software of my MDA: it's the official update released by T-Mo a couple of months ago (I installed it myself). I don't know by now what was the orginal version. It was probably a much earlier version, perhaps 1.17. So, my first question is: does it matter what the original version was, or it only matters what the current version is? Can I fry the phone if I follow your advice for case 3?
2. T-Mo unlocked the phone for me (they do it for its customers after a while). However, I don't know if it's been both SIM-unlocked and CID-unlocked; or just SIM-unlocked. How do I find out? I did run lokiwiz on it (just in case) but I have no idea if it succeded.
3. After running lokiwiz, I tried to install QTek 9100 ROM with push mail, shipping (I found it on the web, and it claimed to be for a shipping QTeck; so, I thought it's a pretty safe ROM). It states that its version is 2.17.7.102. However, the installation failed: it got to the three-colored screen and stopped there. The device is OK though (after soft reset), just runs the previous software 2.26. What does it tell us? And does it make sense at all to "upgrade" to a lower version just to get an unlocked JAVA-running device? Or you'd recommend a different ROM (which one?)?
Many thanks,
LKMDA
risidoro said:
Ciao,
this is what you have to do:
1) Check whether your phone is G3 or G4 (reset and look at IPL/SPL version: 2.xx.0001->G4; 2.xx->G3)
2) If it is G4: you cannot CID unlock it. To install a different rom, then, you must follow this tutorial: http://forum.xda-developers.com/showthread.php?t=271043
3) If it is G3 AND rom version is >= 2.21 (equal or greater than 2.21): cannot be CID unlocked, use the same tutorial as for G4.
4) If it is G3 AND rom version is < 2.21 (minor than 2.21): follow this thread http://forum.xda-developers.com/showthread.php?t=263116 to learn how to downgrade the rom and CID unlock the phone.
bye
Click to expand...
Click to collapse
For your point 3:
Does the problem appears after I upgrade the ROM version to 2.26 (t-mobile)?
Current version is 1.7.13
can the G4 be unlock through - http://www.imei-check.co.uk/ ?
uccoffee said:
can the G4 be unlock through - http://www.imei-check.co.uk/ ?
Click to expand...
Click to collapse
Some have reported that they have used IMEI with the G4 successfully.
--M
Related
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
I3aYardo said:
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
Click to expand...
Click to collapse
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
Click to expand...
Click to collapse
I would be very thankful if you could post a link or send me the ROM upgrade Utility needed
best regards
Bayardo
risidoro said:
I3aYardo said:
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
Click to expand...
Click to collapse
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Click to expand...
Click to collapse
Hi risidoro,
I am trying upgrade my O2 German Wizrad G4 version into WWE, I followed your instruction & has used nb2nbf to compile a 2.xx rom without IPL & SPL. When I used the update utility to falsh the Wizard, the utility said something like: Error, this update utility is not for your device. etc.
I think I need to used your modified update utility , can you send it to me?
Also my other question is, when I use nb2nbf , what should I put in the model id for my German Wizard?
You advice can help me & many others to solve our headache in upgrading a G4 Rom! Cheers!
phone_one said:
Hi risidoro,
I am trying upgrade my O2 German Wizrad G4 version into WWE, I followed your instruction & has used nb2nbf to compile a 2.xx rom without IPL & SPL. When I used the update utility to falsh the Wizard, the utility said something like: Error, this update utility is not for your device. etc.
I think I need to used your modified update utility , can you send it to me?
Also my other question is, when I use nb2nbf , what should I put in the model id for my German Wizard?
You advice can help me & many others to solve our headache in upgrading a G4 Rom! Cheers!
Click to expand...
Click to collapse
The modified RUU (ROM Update Utility) is attached.
For ModelID you can use both WIZARD or Prodigy (i used the former).
risidoro said:
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Click to expand...
Click to collapse
sorry to hijack your thread,
just wanted to ask a short question.
if my info is as below:
US T-mobile MDA Vario
IPL 1.03
SPL 1.06
GSM 01.12.10
OS 1.3.13.5
ROM version: 1.3.13.5 ENU
ROM date: 9/29/05
Radio version: 01.12.10
Protocol version: 4.0.13.23
ExtROM: 1.3.13.116
OS 5.1.70(build 14406.1.1.1)
Click to expand...
Click to collapse
does this mean that its on a G3 chip and that i can use lokiwiz03a to CID unlock it and upload any 2.x ROM as i please? and downgrade the ROMs too?
@Bola: you have a 1.x ROM so you can CID unlock your phone with Lokiwiz0.2b (NOT 0.3a). Then you'll be able to install whichever ROM you like.
Bye
I've just published a tutorial that can help those with a G4 or G3 (>= 2.21) CID-Locked device to install whichever 2.x ROM they like.
The tutorial is here:
http://forum.xda-developers.com/viewtopic.php?t=56088
Bye
risidoro said:
@Bola: you have a 1.x ROM so you can CID unlock your phone with Lokiwiz0.2b (NOT 0.3a). Then you'll be able to install whichever ROM you like.
Bye
Click to expand...
Click to collapse
thanks risidoro.
i'll give it a go later.
there wont be any issue downgrading the ROM later would there?
eg if i were to install:
RUU_Wizard_2211301_22113102_021911_DOP_ASIA_WWE_Ship.exe
Click to expand...
Click to collapse
and later back to
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe ?
Click to expand...
Click to collapse
oh, the bootloader (IPL/SPL) doesnt get upgraded either when i upgrade, would it?
oh thank for the help risidoro.
i saw your post after i uploaded mine.
read through your tutorial and i figured that both IPL / SPL will get updated
people like you makes this site great
thanks once again.
Hi,
a few days ago i wrote on this forum that i had been able to install an italian ROM on a G4, CID-Locked Wizard. Since then, i've received several mails and PM from users asking me how i did. Instead of replying each one, i though it was better to write a tutorial and post it here for everyone to read/comment/correct it.
Here it is. Together with the tools you'll need to perform the update.
PS: in this tutorial i'm not explaining how to CID-UNlock a G4 or G3 (>= 2.21) phone. There is not yet a way to CID unlock these phones. I'm just describing how to circumvent the CID-lock problem by installing a ROM deprived of the IPL and SPL parts.
DISCLAIMER: THE PROCEDURE I’M GOING TO EXPLAIN DEALS WITH ROM ‘COOKING’ AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.
By following this tutorial, you're removing both the bootloaders (IPL and SPL) from a rom of your choice. This means that, if you don't make errors while 'cooking' the rom, you cannot completely destroy (brick) your phone. Sure, you could end up with a non-booting rom but, as long as you can get to the three colors screen (the bootloader screen) you'll always be able to install a different (or your previous) working rom.
On the other hand, messing with IPL and SPL (i.e. installing a rom containing IPL and SPL in a CID locked device) is EXTREMELY DANGEROUS and MUST be avoided in most cases!!!
Installing a 2.xx rom without messing with your phone's IPL and SPL is exactly what this tutorial tries to explain.
NEVER INSTALL ROMS OR FOLLOW TUTORIALS IF YOU'RE NOT SURE OF WHAT YOU'RE DOING!!!
ALWAYS ASK BEFORE PROCEEDING! A SIMPLE QUESTION MAY SAVE YOUR PHONE FROM DEATH!
Worked perfect!
Thank you very much for the clear explanation!!! 8)
HI,
Have I to introduce on nb2nbf SW the ITA language without CID??
squarna said:
HI,
Have I to introduce on nb2nbf SW the ITA language without CID??
Click to expand...
Click to collapse
Leave the CID field empty and specify the language you're installing (ITA for italian, WWE for english).
Hi,
I have installed this SW on my MDA T-mobile:
IPL:2.21.0001
SPL:2.21.0001
GSM:2.19.11
OS:2.21.2.6
EXROM:2.21.2.109
What is the best Italian ROM to flash inside?
squarna said:
Hi,
I have installed this SW on my MDA T-mobile:
IPL:2.21.0001
SPL:2.21.0001
GSM:2.19.11
OS:2.21.2.6
EXROM:2.21.2.109
What is the best Italian ROM to flash inside?
Click to expand...
Click to collapse
This is quite Off Topic here, anyway you can use K-Jam 2.18 italian ROM (find it here: ftp://ftp.clubimate.com/K-JAM_ITA_2180901_21809104_20710_ship.zip)
German to WWE
Worked perfect, no glitches! Thanks for the help!
So is there any issues with using a mismatched ipl/spl bootloader on my G4 equipped O2 mini S?
I really want to install Mr. Clean's Clean ROM, but i am afraid of bricking it.
I have done ROm upgrades before by CID unlocking my old Qtek9100 G3 (but my foolish friend dropped it into a cup of coffeee and killed it).
I will admit, the Mr. CLean Rom was WAY faster than my OE 2.21 ROm on my O2.
Is there anyway to go back and uninstall? Ie. download rom from O2 website to restore it?
REgards,
ED
minirx7 said:
So is there any issues with using a mismatched ipl/spl bootloader on my G4 equipped O2 mini S?
I really want to install Mr. Clean's Clean ROM, but i am afraid of bricking it.
I have done ROm upgrades before by CID unlocking my old Qtek9100 G3 (but my foolish friend dropped it into a cup of coffeee and killed it).
I will admit, the Mr. CLean Rom was WAY faster than my OE 2.21 ROm on my O2.
Is there anyway to go back and uninstall? Ie. download rom from O2 website to restore it?
REgards,
ED
Click to expand...
Click to collapse
You CAN install MrClean AKU2.3 ROM BUT only if you first modify it following my guide: you cannot touch the IPL/SPL parts!!!
There are two reasons for not installing the original, unmodified MrClean ROM:
1) G4 phones cannot be CID unlocked. This means that you can replace their original IPL/SPL ONLY with a newer version made by the very same operator: e.g. if you have a 2.21 WWE T-mobile ROM then you can ONLY update this rom with a version > 2.21 made by T-mobile!!! You CANNOT use any other language nor any other operator's ROMs (cingular's, qtek's, etc).
2) MrClean ROM, as all the other home made ROMs you'll find in this forum, can be installed ONLY in G3 models because it contains only IPL and SPL version 1.0 (G4 phones need version 2.0)
Basically then, you have only 3 choices:
a) Follow my tutorial and be able to install every 2.x ROM you like (both stock ROMs and home made ones, every language, every operator). The only limitation is that you cannot install 1.x ROMs!
b) Install ONLY ROMs that are the OFFICIAL update to the one you have currently installed (e.g. if you have cingular 2.25 WWE rom then you'll be able to update it only when and if, a new, official, wwe, cingular ROM will be released). You won't be able to install a different language ROM nor a ROM made by a different operator, nor a home made ROM (like MrClean).
c) you can CID unlock your G4 wizard using some online service but: it will cost you money and you won't still be able to install home-made ROM 'cos they contain only IPL/SPL version 1.0 (you'll still need IPL/SPL version 2.0)
That said, i strongly suggest you solution (a)! It's free, it's very simple (it may seem complex but after the first time it'll be straight forward), it's the safest (because you don't replace the boot loader IPL and SPL) and it let you install whichever 2.x ROM you like!
Bye
Thank you risidoro,
Yes, i do realize the G4 IPL/SPL must not be altered to prevent from bricking the device.
I will try the Mr. Clean ROM tonight using your tutorial. I guess my only question is, will there be an issue using a 2.21 G4 IPL SPL on a 2.24ROM?
DOes the bootloader actual change with new ROMS?
risidoro said:
minirx7 said:
So is there any issues with using a mismatched ipl/spl bootloader on my G4 equipped O2 mini S?
I really want to install Mr. Clean's Clean ROM, but i am afraid of bricking it.
I have done ROm upgrades before by CID unlocking my old Qtek9100 G3 (but my foolish friend dropped it into a cup of coffeee and killed it).
I will admit, the Mr. CLean Rom was WAY faster than my OE 2.21 ROm on my O2.
Is there anyway to go back and uninstall? Ie. download rom from O2 website to restore it?
REgards,
ED
Click to expand...
Click to collapse
You CAN install MrClean AKU2.3 ROM BUT only if you first modify it following my guide: you cannot touch the IPL/SPL parts!!!
There are two reasons for not installing the original, unmodified MrClean ROM:
1) G4 phones cannot be CID unlocked. This means that you can replace their original IPL/SPL ONLY with a newer version made by the very same operator: e.g. if you have a 2.21 WWE T-mobile ROM then you can ONLY update this rom with a version > 2.21 made by T-mobile!!! You CANNOT use any other language nor any other operator's ROMs (cingular's, qtek's, etc).
2) MrClean ROM, as all the other home made ROMs you'll find in this forum, can be installed ONLY in G3 models because it contains only IPL and SPL version 1.0 (G4 phones need version 2.0)
Basically then, you have only 3 choices:
a) Follow my tutorial and be able to install every 2.x ROM you like (both stock ROMs and home made ones, every language, every operator). The only limitation is that you cannot install 1.x ROMs!
b) Install ONLY ROMs that are the OFFICIAL update to the one you have currently installed (e.g. if you have cingular 2.25 WWE rom then you'll be able to update it only when and if, a new, official, wwe, cingular ROM will be released). You won't be able to install a different language ROM nor a ROM made by a different operator, nor a home made ROM (like MrClean).
c) you can CID unlock your G4 wizard using some online service but: it will cost you money and you won't still be able to install home-made ROM 'cos they contain only IPL/SPL version 1.0 (you'll still need IPL/SPL version 2.0)
That said, i strongly suggest you solution (a)! It's free, it's very simple (it may seem complex but after the first time it'll be straight forward), it's the safest (because you don't replace the boot loader IPL and SPL) and it let you install whichever 2.x ROM you like!
Bye
Click to expand...
Click to collapse
minirx7 said:
Thank you risidoro,
Yes, i do realize the G4 IPL/SPL must not be altered to prevent from bricking the device.
I will try the Mr. Clean ROM tonight using your tutorial. I guess my only question is, will there be an issue using a 2.21 G4 IPL SPL on a 2.24ROM?
DOes the bootloader actual change with new ROMS?
Click to expand...
Click to collapse
Bootloader and ROM version numbers usually are the same (so ROM 2.24 should have IPL/SPL 2.24) but they can be different. I've used IPL/SPL 2.21.001 with both 2.18 and 2.24 ROMs.
Maybe newer ROMs, greater than 2.24, will require an updated IPL/SPL so you'll be obliged to CID unlock your phone. By then however, i hope there'll be a free CID unlocking tool for G4.
bye
Thank you risidoro!! I was regretting getting my O2 miniS G4, in place of my broken Qtek 9100 G3.
I will give it a shot tonight. I noticed that the 2.24 ROM was much faster when I used it on my Qtek, over any other ROM.
Regards
risidoro said:
minirx7 said:
Thank you risidoro,
Yes, i do realize the G4 IPL/SPL must not be altered to prevent from bricking the device.
I will try the Mr. Clean ROM tonight using your tutorial. I guess my only question is, will there be an issue using a 2.21 G4 IPL SPL on a 2.24ROM?
DOes the bootloader actual change with new ROMS?
Click to expand...
Click to collapse
Bootloader and ROM version numbers usually are the same (so ROM 2.24 should have IPL/SPL 2.24) but they can be different. I've used IPL/SPL 2.21.001 with both 2.18 and 2.24 ROMs.
Maybe newer ROMs, greater than 2.24, will require an updated IPL/SPL so you'll be obliged to CID unlock your phone. By then however, i hope there'll be a free CID unlocking tool for G4.
bye
Click to expand...
Click to collapse
THANK YOU THANK YOU!!!
I HAVE SUCCESSFULLY INSTALLED MR. CLEAN 2.24A ON MY G4 DEVICE!!!!
THe ROM is so much faster and smoother than the OE 2.21 ROM!!! tahnks again!
risidoro did you SIM unlock your G4 phone ? If yes what tool and version did you use to do that ?
jeegnesh said:
risidoro did you SIM unlock your G4 phone ? If yes what tool and version did you use to do that ?
Click to expand...
Click to collapse
My two phones were both factory simunlocked but i heard that some people is successfully using LokiwizMSL 0.3a to sim unlock G4 wizards.
Just follow the author's instruction. The procedure is staightforward.
Find it here: http://forum.xda-developers.com/viewtopic.php?t=50768&highlight=lokiwiz
Bye
Thanks for the superfast reply, actually waiting for someone to get me this phone, hopefully this week, wil try it out once I get it.
Using Clean ROM, does it just improve startup time, or does it improve performace of the phone in general ?
Do you have to re-install software after ROM update ?
jeegnesh said:
Thanks for the superfast reply, actually waiting for someone to get me this phone, hopefully this week, wil try it out once I get it.
Using Clean ROM, does it just improve startup time, or does it improve performace of the phone in general ?
Do you have to re-install software after ROM update ?
Click to expand...
Click to collapse
Upgrading the OS part of a ROM cause your phone to hard reset, so yes, you'll have to reinstall everything. If, on the other hand, you upgrade any other part (GSM, Splash, ExtROM, HTC) but not the OS then you won't loose your data.
MrClean ROM and Summitter's ROM are both very fast. The latter contains cingular's customizations in extROM (they don't slow down the phone, they're mainly registry settings), some ringtones and compact framework 2.0 in ROM. If you're not a cingular user then i suggest you take the OS part from summitter's rom and the extrom from the MrClean. Then join the two parts with nb2nbf and flash to your device.
Bye
Any reason to take Summitter's OS is it faster or something then Mr Clean ?
jeegnesh said:
Any reason to take Summitter's OS is it faster or something then Mr Clean ?
Click to expand...
Click to collapse
No. Both summitter and mrclean use the same OS ROM (2.24.10 AKU2.3) hence they have the SAME, IDENTICAL speed.
The difference is that Summitter manually edited the original ROM and added a lot of ringtones, themes and, most important, the .net compact framework 2.0. If you install Summitter OS, then, you'll have the same mrclean basic OS plus a lot of goodies that don't take any space in storage since they're in ROM (compact framework 2.0 alone would take about 5mb of your precious storage if you installed it on mrclean).
bye
This thread needs to be a sticky!!
Hi all,
i've read a lot of threads on this forum and posted here and there but haven't got the answers I need to start messing with my phone.
could someone please help me out and give some advice?
I have a CID & SIM locked Dutch MDA Vario G3 with IPL/SPL at 2.21
I would really like to upgrade my ROM for getting rid of the tmobile stuff AND speed it up.
I'd like to know the following:
1) Can I upgrade a locked DUTCH vario to the Official tmobile 2.26 USA software without hacking or is this prevented as well?
2) I read stories about CID unlocking a G3 2.21 being possible AND being Impossible ..... which is it?
3) Can I downgrade my phone SAFELY to the custom ROM on this forum, I read about success stories but not for everyone .... what makes it work sometimes and does it matter that it will downgrade the IPL but NOT the SPL?
4) Can I or can I NOT just flash a G4 ROM over my G3 phone and leave the locked IPL/SPL as it is?
5) is there a disadvantage to NOT unlocking it and just flash a G4 ROM? what would I be missing out on? can I upgrade to 2.26 official and then flash a G4 ROM and have the same end result?
please help me out on this, I am ready to flash my phone but would not like to brick it since it is just a month old.
thanks a lot! stefan.
i trie craptree's guide, and I can read back all relevant data from my locked vario, at 2.21 I just can't write it back, so that's a nogo either.
any advice? G4 ROM or downgrade?
Hi,
I have a dutch HTC wizard/qtek 9100, with the AKU 2 NLD ROM.
I tried CID unlocking but noticed that didn't work with AKU 2,
Is it possible my phone isn't cid-locked? Is there a quick way to check?
How can I downgrade to an older rom version and what file should I use,
I tried this one: "RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe"
but after restarting my wizard and loading the bootloader the update program gave an error claiming that it can only UPgrade to newer versions...
I suppose I cant use the wwe version or can I?
well, thanx in advance,
Bonusbartus
As written before, u need AKU 1 to CID unlock your phone..the only way to be sure is to unlock again. Use buttons rom.. downgrade to that... unlock the phone.. install the rom again so the IPL and SPL are the same..then you can switch to whatever rom you want. How ever, you havent shown what type of Wizard you have whether its a G3 or a G4..the above method is what i used for my G3 Wizard
I have a g3 wizard,
so I can use that rom, I don't need a dutch version or something else?
Bonusbartus said:
Hi,
I have a dutch HTC wizard/qtek 9100, with the AKU 2 NLD ROM.
I tried CID unlocking but noticed that didn't work with AKU 2,
Is it possible my phone isn't cid-locked? Is there a quick way to check?
How can I downgrade to an older rom version and what file should I use,
I tried this one: "RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe"
but after restarting my wizard and loading the bootloader the update program gave an error claiming that it can only UPgrade to newer versions...
I suppose I cant use the wwe version or can I?
well, thanx in advance,
Bonusbartus
Click to expand...
Click to collapse
1. Thank-you for posting in a new thread and not in a ROM release thread.
2. Do you have a G3 or G4 (what is your IPL/SPL?)
2a. If you have a G3 read the Sticky post The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards.
2b. If you have a G4 log onto the IMEI pay site (links all over the place) and pay to get your phone unlocked.
3. IF you have a G3 rom you must downgrade to CID unlock. It isn't possible to CID unlock from AKU2 or higher (read the sticky, it tells you what you need to do)
4. The best thing to do if you are unsure is to just repeat the unlock procedure. It won't hurt a thing if you are already unlocked, but will unlock you if you are locked.
5. Don't do anything flash related until you know for sure, beyond a doubt which version of Wizard you have (G3 or G4) If you have a G4 and use G3 procedures you WILL most likely ruin your device.
6. You won't get this error if you follow the steps in the correct order from the upgrade guide.
7. Good Luck
Bonusbartus said:
I have a g3 wizard,
so I can use that rom, I don't need a dutch version or something else?
Click to expand...
Click to collapse
With your G3 just follow the steps, in order, from the sticky and you should be able to end with whatever ROM you choose. Some of the steps may not make sense but, they are necessary and prevent common issues if followed correctly.
Well, I do have a G3 so I can follow the tutorial,
ipl and spl are 2.18,
only question left, CAN I downgrade to the wwe rom in the tutorial? that's what I wanna know, because I now have a nld rom, can I flash to the wwe rom in the tutorial without CID-unlocking?
well I think I just try
thanx
oh btw, any recommendations on which rom to flash to after unlocking? and I saw something about radio only roms and page-pools what would u recommend there?
How i can downgrade version on WIZA200 (T-mobile MDA) to 2.01?
or how i can debrand ? I try to install (RUU_Prodigy_1030711_120_10410_Qtek_GER_Ship.exe) but gives error and need newer version.
br
john
GSMFLASCH said:
How i can downgrade version on WIZA200 (T-mobile MDA) to 2.01?
or how i can debrand ? I try to install (RUU_Prodigy_1030711_120_10410_Qtek_GER_Ship.exe) but gives error and need newer version.
br
john
Click to expand...
Click to collapse
Judging by your post title... you appear to have a G4...
If you determine that you have a G3 you can SuperCID & SIM unlock, then simply install the desired ROM package (.exe) from your desired provider.
Start here: http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
If in fact you do have a G4, you can flash any ROM on your device by following the procedures found (SIM unlock required for use with other provider SIMs)...
here http://forum.xda-developers.com/showthread.php?t=271043&highlight=install+any+ROM
or alternate method just for OS and not other parts look here: http://forum.xda-developers.com/showthread.php?t=271043&highlight=install+any+ROM
Make sure you understand everything that is explained on these pages before you attempt anything or you risk "bricking" your device.
i think my cingular is dead
i have a cingular 8125 Cingular 8125
IPL 2.25
SPL 2.25
Radio 02.25.11
OS 2.25.11.1
i tried to downgrade to 1.8.11 and now is dead.not even start.can i repair it?what shoul i do?
neapci said:
i have a cingular 8125 Cingular 8125
IPL 2.25
SPL 2.25
Radio 02.25.11
OS 2.25.11.1
i tried to downgrade to 1.8.11 and now is dead.not even start.can i repair it?what shoul i do?
Click to expand...
Click to collapse
First of all, why are you downgrading? Are you certain you have a G3? Did you unlock your device? If you can get the phone into boot loader mode you can recover. Flash your providers most recent ROM, put the device into boot loader mode first. READ the wiki. If you skip steps, this happens.
my phone is g4 and accidentally i've flashed a g3 rom.the bootloader is crashed.it doesn't even start.can be repaired?
G4
thx for answer,
MDA is G4 WIZARD200 2.21.0001 version, and its T-Mobile branded, which ROM is best for this MDA without branding? Germany Lng.
Because of my broblem i dont want to have any t-mobile-O2-Orange branding on phone just standart some room without any branding in Germany Language.
br
John
GSMFLASCH said:
thx for answer,
MDA is G4 WIZARD200 2.21.0001 version, and its T-Mobile branded, which ROM is best for this MDA without branding? Germany Lng.
Because of my broblem i dont want to have any t-mobile-O2-Orange branding on phone just standart some room without any branding in Germany Language.
br
John
Click to expand...
Click to collapse
Yes, just find a G3 Rom that suits your needs and modify it using the instructions in my earlier post to you and you should be able to get it on your device.
ercave1 said:
Yes, just find a G3 Rom that suits your needs and modify it using the instructions in my earlier post to you and you should be able to get it on your device.
Click to expand...
Click to collapse
I get crazy , modify is no problem to do , but i didnt find one good rom without branding in germany language, if you have time can you give me a link maybe ? thank u very much.
br