Database Develop

the most reliable BlueAngel ever, want to know how i did it?

I have just reflashed the firmware on my UK Orange SPV M2000 after porting my mobile operator over to virgin mobile. i did this so i could remove the Operator customisations which were just taking up ram, and also to see if i could make my phone more reliable (one of my biggest bugbears is not being able to use Wifi without a soft reset) as a result i can switch on and of bluetooth and wifi at will without any errors, and i havent performed a soft reset because of a problem in 6 days (i have soft resetted after installing some programs as it was required by the prog)
I achieved by first downloading ftp://xda:[email protected]/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom.rar and removing the Radio_.nbf file and flashing that to the phone.
once that was done i did a hard reset then flashed radion rom 1.13 as described here http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
I then downloaded all the files from here ftp://ftp.xda-developers.com/BlueAn...ERK_1.4X_002/I-Mate_PDA2K_Ext_ROM_140176_WWE/ into a directory on my PC
I then deleted
Default_ImateV112.002.cab -> dont need it as i havent got an imate so dont need imate email
Default_Caller_ID_BA_AKU26_RC20.CAB -> i will explain why in a minute
Default_Fax_V2.09_WWE_0720.CAB -> havent got a need for faxes
Default_SkypeForPocketPC.CAB -> this is pants and so is skype
and then i then added cabs for the following programs prefixing them with the Default_ so they would install after hard reset
Voice command 1.5 for Phone edition -> i think every one uses this
Photo Contacts Pro v 3.01 -> This is fantastic beats the IA caller ID hands down
I then used the extrom unlocker and deleted all the files in the extended rom and then copied my downloaded files into it. the then locked and hid the extended rom again and then performed a hard reset
once that was done i added in the Virgin GPRS and MMS settings (If anyone wants help with this part for virgin settings let me know as i am working on creating a CAB file with these settings) and renamed device and added owner information.
There are two problems now, the first i can fix, the camera raises the backlight to full and then keeps it that way. i just deleted camera.exe from the windows directory and then replaced it with the camera app that was originally on the device (make a backup of this file b4 you start)
The only problem that is left is a problem that happened with WMP9 and WMP10 if music is playing and you close WMP then your device loses all sound. i dont know of a workaround for this, but i make sure i pause any music before i close the app, not a big thing really
I then loaded on these apps mainly into the storage memory except that specifically request you install them into main memory
SPB Pocket Plus 2.5
SPB weather
SPB Diary
Ewallet
Tomtom Navigator 5
Microsoft Reader
Pocket Mechanic
and last but not least my favourite game Virtual Pool Mobile v1.6
This doesnt sound like many apps but it suits my needs perfectly for the moment.
I then took a full backup onto SD........
and viola one ultra stable Orange SPV M2000
i hope it works for you too
I would do what i did when installing apps and install one at a time and test especially task managers and today screens as these use up driver memory, this is where the problem with the WIFI and bluetooth starts
and in case i dont see you good afternoon and good evening and goodnight (watched the trueman show again! :roll: )

Interesting and well detailed,
I then used the extrom unlocker and deleted all the files in the extended rom and then copied my downloaded files into it. the then locked and hid the extended rom again and then performed a hard reset
Click to expand...
Click to collapse
Can you elaborate on the above please

fuzzy,
Wonder if you can attach the camera.exe file here? TIA!

Can you elaborate on the above please
Click to expand...
Click to collapse
What i mean is i run the extended rom unlocker tools on the device by selecting unhide & unlock and then through activestink browse to the /extended rom folder and then delete the files and then copy the extended rom files from the pc and put in thier place.
i hope that clarifies it for you
and yes i can attch the file for download, but its on my other comp and because of a failed raid array i havent replaced yet it takes 20 mins to boot, so i will do it tommorow

Thanks, fuzzy. Looking forward to that

fuzzy,
Are you able to extract that exe file yet ?

Nvm, fuzzy.
Found the camera.exe HERE.

Hi Fuzzy,
Where did you get the cabs from for:
Voice command 1.5 for Phone edition ->
Photo Contacts Pro v 3.01 ->
Cheers
Yohanson [/quote]

i got Voice command 1.5 with IRC on #pocketwarez on EFNET servers
and as for photo contacts i couldn't get it free so i ended up buying it (first pocketpc software i have bought ever, and to be blunt it was worth it for something that is used every time you recieve a call)

I have also incresed the number of programs by upgrading to latest versions of SPB programs and also added SPB time and SPB weather and i still have no problems with Wifi. it starts first time every time.
I have just bought 5 more of these phones but O2 XDA IIs so i will reflash these the same and then flog on ebay.
every one else who has one of these phones is jelous because it has been reliable as a rock since i did this, and i have still not experieced any problems since the flash, and i have not performed one soft reset because of a problem. i know a lot of you wont believe it but its true it has been rock solid for me. so i will test the same procedure on the five phones when get them and see if there are any differences

Great stuff!
I did something a little similar here.
I took the latest firmware and Extended firmware.
I then went through it and deleted everything I don't need.
Splash Screen, Clearvue stuff, Cingular settings, album, etc etc etc.. Although these would be neat programs... let's be honest... when it comes to the Blue Angel, less is more.
So right now, I'm pretty stable.
I don't put anything in the Protected ROM. I think a lot of apps don't like it.
We'll see how this goes!
Mike

Since I do not want to hard reset - what are the files that I need to remove in order to completely uninstall IA Caller ID ? - it does not show up on my installed apps to remove so I need to do it manually - TIA

AdmiralAK said:
Since I do not want to hard reset - what are the files that I need to remove in order to completely uninstall IA Caller ID ?
Click to expand...
Click to collapse
I havent got a clue of all the files that it uses but i imagine if you look in the windows\startup directory you will see a shortcut to start the program delete it and it wont run, but dont hold me to it as i havent got it installed to check what the shortcut is

PUG

Hi there sorry if this is the wrong section, but I was hoping Pug would be able to tell me how to upgrade my ROM, etc because I'am still using the original.
Also could someone be so kind as to list a tap by tap guide to setting up my XDA IIi to connect to O2 Active, and Mobile Web, as I have a pay as you go SIM card in the XDA IIi?
Thanks alot peeps.

rmurph17 said:
Hi there sorry if this is the wrong section, but I was hoping Pug would be able to tell me how to upgrade my ROM, etc because I'am still using the original.
Also could someone be so kind as to list a tap by tap guide to setting up my XDA IIi to connect to O2 Active, and Mobile Web, as I have a pay as you go SIM card in the XDA IIi?
Thanks alot peeps.
Click to expand...
Click to collapse
Hi, There is plenty in the Alpine sections about upgrading to the various ROM sections, just have a look or search. You will find the files here, ftp://xda:[email protected]/Uploads/Alpine/
You can see what PUG ROM version I use, which I have found to be very good.
Sometime ago I uploaded all the cab files for your Carrier Settings, just copy cab to XDA IIi and tap to run, after the cab has installed the settings, it will delete itself, so make sure you keep a copy for future use.
http://forum.xda-developers.com/viewtopic.php?t=26463

rmurph17 said:
Hi there sorry if this is the wrong section, but I was hoping Pug would be able to tell me how to upgrade my ROM, etc because I'am still using the original.
Also could someone be so kind as to list a tap by tap guide to setting up my XDA IIi to connect to O2 Active, and Mobile Web, as I have a pay as you go SIM card in the XDA IIi?
Thanks alot peeps.
Click to expand...
Click to collapse
The latest PUG upgrade is here, ftp://ftp.xda-developers.com/Uploads/Alpine/O2_Roms__Camera_Fixed_Pug
There are 2 files here, one has all the unneccessary 02 software outstripped and the other with all the 02 software included.
Once downloaded, extract to a folder on your desktop (or anywhere on your PC). Make sure your PDA is connected via the cradle and Activesync. Goto the folder you have extracted the files to on your PC, click to run MaUpgradeUt_noID.exe, just click OK, then you should see a message saying it is checking your Device, your devices screen should go blank (Although you will see some dark text including the word Serial on your PDA)
You should then get a screen saying what ROM version you have and the New version, press ok then a screen will pop up saying checking device, the common thing to happen here is it will stop in this screen, what 5 mins if it doesn't change then don't touch your PDA, CTRL-Alt-DEL on your PC keyboard to bring up Task Manager, select the Process Tab and look for the file name MaUpgradeUt_noID, highlight it with one click and then press End Process button, go back to the folder and run MaUpgradeUt_noID again follow the screen instructions again and then it will update this time, indicated by a install bar screen, it will take about 20mins to complete.
Once updated remove your PDA from its cradle and hold the Power Button down and at the same time press the softreset hole with your Stylus, this will Hard Reset (Factory Settings) your device, depending on the version you have installed follow instructions on the PDA, it will install some more files which take 5 to 10 mins to install. Thats it you device is now updated.
For your carrier settings goto http://forum.xda-developers.com/viewtopic.php?t=26463, there you will find the CAB files for your Phone Carrier (remember there is a file for PAYT and Contract for each Carrier, download the correct one for you), download the correct one for you and copy to your PDA, tap to run and your correct MMS/GPRS/WAP settings are then installed. Very Happy
**Please Note before you update your PDA. Please copy anything you want to keep on your PDA to your PC, don't worry about SD storage or the other Perminent Storage area as the update leaves these untouched. If you want to save your Contacts and or your Appointments and Tasks then goto Settings on your PDA select second Tab and then select Perminent Save, tick your selection and tap OK, then once you have carried out the update go back to Perminant Save and tick boxes you want restored and then tap OK, this function will dynamically keep your backup upto date, so you can use this anytime.
Phew, hope this helps.

I have tried all teh CAB files, and all the individual settings, to get full GPRS working on my O2 PAYT SIM.
After 2 emails to o2's technical department (which at least they answered within 24 hours) I was assured that the reason I couldnt connect is the APN whould be set to mobile.o2.co.uk - but that ONLY worked on contract plans.
They categorically stated that PAYT O2 ONLY features WAP GPRS, i.e. those small WAP-sites suited to mobile phones, and not the 'full deal' (ie web browsing, irc, MSN MEssenger etc)
...so, after a LONG time with O2 PAYT, I am now a Vodafone customer with a Vodafone PAYT SIM!
I can surf the web, join my irc channels, use MSN Messenger, the works, and they emailled me the correct settings the very same day I emailled them to ask for them too.
Joe Pinball
now a happy Vodafone GPRS internet user!

Hi,
just got an 2nd hand xda IIi earlier on today and seem somewhat shafted as i only have macs and no pcs, been looking arround for the last few hours to find some form of sync software which doesnt cost
can anyone tell me how to update the rom from a mac?
cheers

Ok,
so im guessing from spending hours searching the forums here last night unless im willing to buy pocketmac or missing sync there is nothing.
think i will use a virtual pc *sigh*
roll on the x86 mac hardware.

Mac OS is based on BSD. I believe there are scripts floating around here in perl that any decent *nix flavour should run. Perhaps some of these might be able to help you.

if you can run a Virtual PC with access to USB ports on the Mac, I'd reckon that would be the easiest (!) approach to adding Activesync for syncing files etc & installing any applications, as all of the pocket PC apps' installers are also windows-based.
Joe

had a long look for perl stuff and didnt find much so got virtual pc installed now. just got pugs rom on the xda and the speed has incresed (it doesn't feel as slugish anymore) wifi signal is a lot better, but i still seem to have BT issues, wonder if thats something to do with my headset though.. sounds like bad reception sometimes even though the phone is only in my coat pocket.

new I-mate SP5 ROM on a new 8125?

I just came across this post, and I'm very new at this...
Can I upgrade my Cingular 8125 (fresh out of the box, but unlocked with lokiwiz02b) with this ROM?
I'm a canadian using Rogers service.
http://www.modaco.com/I_mate_SP5_ROM_Officially_Released_today_-t238322.html

philletourneau said:
I just came across this post, and I'm very new at this...
Can I upgrade my Cingular 8125 (fresh out of the box, but unlocked with lokiwiz02b) with this ROM?
I'm a canadian using Rogers service.
http://www.modaco.com/I_mate_SP5_ROM_Officially_Released_today_-t238322.html
Click to expand...
Click to collapse
I wouldn't put a ROM designed for a Tornado SmartPhone on my Wizard...but that's just me. ;-)
What is it you'd like to accomplish?

oops
Holy ****, I just saw that... sorry, I'm really new at this...
Anyway, I have all the Wizard files from the xda ftp... I want to know what the latest and greatest ROM to use on my new 8125.
Something that has the push email support? Maybe something with updates similar to the one that the tornado got today? They can now send files by bluetooth from the file explorer, this is **** I was doing on my treo 650 a year ago!
By date alone, K-JAM_WWE_216901_2169101_020710_ship_ExtRom seems to be the newest, should I use that one?
Now, i've superCID unlocked my phone, AND regularly unlocked it, is that all I need to switch to a new ROM?
Can someone point me to a post about backing up all the apps/customizations I've made to my stock setup?
Sorry, I swear I'm reading like crazy, but I could use a couple hints..
Thanks alot.

Re: oops
philletourneau said:
Holy ****, I just saw that... sorry, I'm really new at this...
Anyway, I have all the Wizard files from the xda ftp... I want to know what the latest and greatest ROM to use on my new 8125.
Something that has the push email support? Maybe something with updates similar to the one that the tornado got today? They can now send files by bluetooth from the file explorer, this is **** I was doing on my treo 650 a year ago!
By date alone, K-JAM_WWE_216901_2169101_020710_ship_ExtRom seems to be the newest, should I use that one?
Now, i've superCID unlocked my phone, AND regularly unlocked it, is that all I need to switch to a new ROM?
Can someone point me to a post about backing up all the apps/customizations I've made to my stock setup?
Sorry, I swear I'm reading like crazy, but I could use a couple hints..
Thanks alot.
Click to expand...
Click to collapse
I must say you're quite brave for wanting to jump in without knowing a whole lot. But that's OK, I was where you are in the not too distant past.
A couple things - at this point it is impossible to get back to a totally stock version after you upgrade unless you have access to another stock 8125 or can get a raw ROM dump from someone to flash using a miniSD card. That said, you can quite easily get it back to a state that would look stock enough to allow you to return/exchange your device should you have any hardware problems.
If you've CID unlocked, you're ready to go. All you need to do is run the Imate or Qtek upgrade executable found on the xda ftp.
The Imate and Qtek ROMs are EXACTLY the same from an OS and radio perspective. The only difference is the customizations. In both cases you can skip the customization by doing a soft rest (stylus-in-the-hole) when the device gets to the screen alignment stuff after flashing.
When your device comes back from the soft reset, it will be a bone bare install of WM5. You will want to run a few cab files from the stock Cingular extended ROM, which is available in a zip file on the ftp. You can install every cab EXCEPT a file called gprsstall. It will kill your wifi. Every other cab is fine and will make your device look like a stock 8125. You can skip the 'good email' and 'get email' cabs too - they are for goodlink and express mail...don't know if you use those..
Anyway, take a deep breath and do it like this:
-plug in and establish activesync
-run either the Imate or Qtek installer
-when done, the device will restart and prompt you to align the screen..hit the reset button at this point and the device will reboot
-when the device comes back up, establish activesync
-explore your device using activesync and open or create a folder to put some files in
-copy the cabs you want to install from the cingular extended rom to the folder you have open on your device
-use file explorer on the device to select each cab file..it will install
-restart your device
-Enjoy.
Oh, both ROMs have Direct Push, so as long as your Exchange account has SP2 installed and push active, it will work quite nicely. Neither ROM has the ability to send files via bluetooth that I can find.
As for backing up your current customizations and stuff, what is it you want to try to save?

ok, I'm learning..
Wow, thanks for the helpful post, I hope to really get into this and contribute back to the forums.
Are the newer iMate and Qtek roms actually a newer version of WM5? I keep reading about this "MS Messaging & Security" upgrade that was supposed to have something to do with push email... is that included?
Aside from push email, what are the other significant improvements?
For the backup, I thought I read somewhere about backing up your current config on an miniSD card (i have 512mb), like the ROM and the apps etc, can that be done?
Any intermediary steps required to get push email going? I couldn't even find anything about exchange servers in the stock ROM, you can only add a POP3 or IMAP4 email account. Is it just a matter of adding a "new mail account" on this new ROM and point it at your exchange server?
Oh and finally, these "customizations" you said I can skip on the new ROMS, are those worth doing? Or do they just program in useless things?
EDIT
Hmm, ok, I was just looking at the Extended ROMS folder, duh, so these extended roms are bunches of little cabs that add customizations to a stock WM5? So looking in the ROMS folders... there's lots of files in each one. iMate for example has a WWE_216901_2169101...zip and a WWE_1010903_106...exe, what do the numbers signify, and which one should I be using?
Oh, and I could swear I saw some mention of Resco Explorer being in one of these extended roms, or somewhere on the FTP, is it?

I would strongly advise against doing this upgrade as it will re-simlock your phone back to Cingular and you won't be able to use it with Rogers. Further, lokiwiz has not been updated to support this new rom yet.
I know this is for a fact with the iMate rom, but I haven't seen anything conclusive about the Qtek rom. Noone here seems to know.
I'm in the same boat, I'm on Rogers with a 8125.

good advice
Thanks for the heads up. I'd like to use push email, I have the reins of our Exchange 2003 sp2 server here, so I can change any settings to make this happen. How do you even setup a non-push exchange server on the base cingular 8125 rom?
As a Canadian, have you done anything specific to your device to make things suitable for here? I know I installed GPRS monitor right away since our Rogers overlords don't have unlimited data plans (unless you count 100mb for an arm or leg every month), and I'm hovering at 7mb a month for $40... Damn I want unlimited...

Re: good advice
philletourneau said:
Thanks for the heads up. I'd like to use push email, I have the reins of our Exchange 2003 sp2 server here, so I can change any settings to make this happen. How do you even setup a non-push exchange server on the base cingular 8125 rom?
As a Canadian, have you done anything specific to your device to make things suitable for here? I know I installed GPRS monitor right away since our Rogers overlords don't have unlimited data plans (unless you count 100mb for an arm or leg every month), and I'm hovering at 7mb a month for $40... Damn I want unlimited...
Click to expand...
Click to collapse
As far as I know, the only way to set up a non-Exchange server is via wireless Active Sync or via IMAP. I haven't done anything provider specific to my 8125 as I don't use EDGE for the reasons you mentioned, just WiFi as it's available both at work and at home.
I'm really dying to install the Qtek rom as by all accounts these roms are infinitely better and faster than the stock Cingular rom. But I'm afraid it will lock my 8125.

Alright, thanks for the advice. Let me know once you do flash your device, and I'll do the same. I suppose we're just waiting for lokiwiz to be updated?
So far I really like the device, I just installed wifitunes and am streaming music from shared itunes libraries at work, and it's flawless!

There's a great post in the Wizard forum that details how to create a miniSD backup of your stock rom. The above poster is correct in that this is the only way to fully return your device to its stock state. The process is simple and you are only out the price of a 128mb miniSD.
Do this backup then upgrade with impunity! Let us know if its still SIM unlocked too. Remember that if it isn't, a 40 second restore will return your device to its original condition. This will work even if the updater fails and "bricks" your wizard. However, I am not sure if the restore process restores the original bootloader, so the "HTC" splash screen might not be removed. I have tried the restore, but not with a Qtek upgraded device.

Can we include SPRITE TERMINATOR in ROM

Hi,
I think most of you are aware of the Sprite Terminator software ( its sends you a SMS of New SIM # and GPS co-ordinates incase of SIM Change - infact its software for protection )..
Now the question is - Can we include this software in ROM ??? incase if you lost the set and the other person even HARD RESET the device.... so we still remain be able to get the info about the new SIM and GPS location ?
Any Idea....

So, I presume its not possible... And we can not include software in ROM ???

Sprite Terminator is not freeware, and you would likely be violating the EULA by bundling it with these ROMs.

outphase said:
Sprite Terminator is not freeware, and you would likely be violating the EULA by bundling it with these ROMs.
Click to expand...
Click to collapse
What about the open source utility mJustice (Mobile Justice) instead?

Well I have a legal copy of SPRITE TERMINATOR and i want to include it into ROM for my TYTN II device just to make it 100% anti theft SO that the theif can't get rid of it even after the Hard Reset.... All i am asking that HOW SHOULD I PROCEED ?

Doesn't seem feasible...
Even when MJ could be cooked in ROM, settings (allowed SIM's, phone number to which messages should be sent, etc.), would be lost after a soft reset. I'd say the only possible solution would be cooking your own ROM (including all the settings, of course).
Just my 2 cents

Alex has this tutorial to convert a cab to a oem package...cook it in yourself.
http://wiki.xda-developers.com/index.php?pagename=OEM Package Tutorial
I never tried it, so I probably can't help you much with this.

Kitchen Package For Sprite Terminator!
max621 said:
Hi,
I think most of you are aware of the Sprite Terminator software ( its sends you a SMS of New SIM # and GPS co-ordinates incase of SIM Change - infact its software for protection )..
Now the question is - Can we include this software in ROM ??? incase if you lost the set and the other person even HARD RESET the device.... so we still remain be able to get the info about the new SIM and GPS location ?
Any Idea....
Click to expand...
Click to collapse
Hi everyone, here is a package for Sprite Terminator 1.2. Use with KaiserKitchen or RaphaelKitchen. Because some settings are personalised (your parnered phone numbers and password etc), you will need to edit 6113774c-bec5-432d-983f-fe230b6f2228.rgu (file is inside attached st.zip) with your own settings. Anything in there with ****** you need to replace with your own personalised settings. To get your personalised settings, first install your purchased copy of Sprite Terminator and configure it.
Buy from www.spritesoftware.co.nz
Then open your registry and copy the config you found into 6113774c-bec5-432d-983f-fe230b6f2228.rgu.
Preserve the format in 6113774c-bec5-432d-983f-fe230b6f2228.rgu and just replace the **** entries with your own!
Don't forget to:
1. Ensure that there is blank line at the end of the text file
2. Wordwrap is OFF!
3. Save the file as unicode
4. Run the kitchen and cook!
This has been tried and tested!!

[email protected] said:
Hi everyone, here is a package for Sprite Terminator 1.2. Use with KaiserKitchen or RaphaelKitchen. Because some settings are personalised (your parnered phone numbers and password etc), you will need to edit 6113774c-bec5-432d-983f-fe230b6f2228.rgu (file is inside attached st.zip) with your own settings. Anything in there with ****** you need to replace with your own personalised settings. To get your personalised settings, first install your purchased copy of Sprite Terminator and configure it.
Buy from www.spritesoftware.co.nz
Then open your registry and copy the config you found into 6113774c-bec5-432d-983f-fe230b6f2228.rgu.
Preserve the format in 6113774c-bec5-432d-983f-fe230b6f2228.rgu and just replace the **** entries with your own!
Don't forget to:
1. Ensure that there is blank line at the end of the text file
2. Wordwrap is OFF!
3. Save the file as unicode
4. Run the kitchen and cook!
This has been tried and tested!!
Click to expand...
Click to collapse
Unless you posted a package that requires a S/N to be entered prior to use, then I STRONGLY SUGGEST you take it down. This is considered warez, and the Mods will come down on you hard for it.

NotATreoFan said:
Unless you posted a package that requires a S/N to be entered prior to use, then I STRONGLY SUGGEST you take it down. This is considered warez, and the Mods will come down on you hard for it.
Click to expand...
Click to collapse
Good Point The Package Will be taken down, not because it has a serial, which it hasn't.
But because it is unclear at the moment, allows for the software to be redistributed and hosted on our servers.
The intention of the package is good but this has to be looked at more closely.
Thanks for your consideration.
Attached is the same package but without the resource files:
SGAgent.dll
SGStartup.exe
Sprite Terminator.exe
SpriteGuardResources.dll
SpriteTerminator.htm
This package should still explain how to add a Legal packaged to a ROM that is cooked for Private use in combination with the Legally owned License. (See Post# 8 )

going one step further ...
good idea guys, but i'd suggest not adding the uninstall information, nor adding a program shortcut - this might give you needed time to locate your device. i guess even the most stupid must get worried if it reads "Sprite Terminator" in programs list, why should we confuse people ;-)
greetz peet

the most you need to include terminator into rom is the registry file (rgu) settings and it would be a good idea to remove the shortcut made in startmenu folder, so a thief does not get warned before action has taken place

Remote Tracker is similar to Sprite Terminator but MUCH better. It has all kinds of features that Sprite Terminator does not (ftp, remote wipe, remote execution of mort script commands, etc). Best of all, it is freeware, and even has an OEM made for cooking into ROMS. Check it out:
http://forum.xda-developers.com/showthread.php?t=394203
and
http://remotetracker.sourceforge.net/index.html

Remote Tracker as is own thread, please close this irrelevant discussion, posted twice

Pisca said:
Remote Tracker as is own thread, please close this irrelevant discussion, posted twice
Click to expand...
Click to collapse
Why are you in 2 separate threads asking them to be closed as duplicates? And even worse, neither thread is actually a duplicate.
Yes, Remote Tracker has its own thread, but this thread is about cooking Sprite Terminator into a ROM. There is ONE post in this thread about Remote Tracker, and all it is doing is informing people of its exististence, not discussing it.
This is NOT a duplicate.

Seems the new desire hd has this or a very similar feature

Totally worth bringing up a year old thread.

[UNLOCK] Sim-unlocker.com HD unlocking

This is a new thread to discuss unlocking with sim-unlocker.com & their client software.
Please keep discussion about sim-unlocker.com here, and not in other threads dedicated to different unlocking services.

HTC TOUCH HD Unlocked
I used http://www.sim-unlocker.com/ they charged me £13.44 thru paypal, after completing the payment they redirected me to a webpage with the software and a file which i guess contained the IME, ran the unlock software and everythings is good it's unlocked!!! hihi tha whole process from the payment till i got the phone unlocked took less than 5 minutes. NO WAINTING NECESSARY, EASY, INSTANT AND CHEAPER THAN ANY OTHER RIPP OFFZ OUT THERE. Attached is the .rar file with the unlock software and the ime.unl file that i downloaded from http://www.sim-unlocker.com/ my guess is if somehow you can manage to change the ime in the ime.unl file and change to your phone's IME (found on the back of the phone if you remove the battery) it should work.
*****Only for those who can manage to change the IME number in the ime.unl file to their IME. The IME in the ime.unl file has my IME incorporated so if you can find a way to change it to your IME, it should work***** The unlock code i got from the unlock software for my phone was 04686206 try it on your phone and it might work for you
***Instructions***
1- The unlock software and the ime.unl file must be on the same folder when you run the Unlock software (BLAC001-unlocker.exe remember to run it as administrator)
2- Make sure you have Microsoft ActiveSync for those running XP or Sync Center for those running Vista and setup a partnership.
3- When Microsoft ActiveSync or Sync Center says Connected, run the program and follow the prompts.

Sim Unlocker
Sorry, no file attached. Would guess that we would also need to know your imei code to identify and change.

Hi,
I can only highly recommend sim-unlocker.com. After many, many weeks of frustrated attempts, within 2 days I was able to unlock the phone.
Also, ever since I got in touch with them, following DavidMc0 advice, they were extremely fast in replying, and tried to get a solution out to me fast. The solution, in the end, worked fine.
Also, regarding posting here the soft and unlocking file that they provide, I would not recommend it... they are phone specific, and, in fact, they are the result of the unlocking company's efforts... Here, I believe you pay a very reasonable (read low) amount for their program, but also for their very good and responsive support.
Regards,
P.

sandymac said:
sorry, no file attached. Would guess that we would also need to know your imei code to identify and change.
Click to expand...
Click to collapse
if he attached the file he would be posting warez
your not asking for warez are you?
please don't post anything here that you shouldn't.
thank you

oops i guess shouldn't post those files here,

touch hd unlocked without problems
just wanted to say,
sim-unlocker.com worked without any problems with my touch hd.
it's really worth the 15€ (compared to 399€ my network provider wanted me to pay )
greets,
-