ok, this is way too strange...my earphones volume where low...way low...even normal street transit where a problem to listen music...it seems like i solved it but...i really dont know why or how...my step by step:
1- normal molski rom (this is not relevant because the volume where low with standard qtek rom) and backup with sprite bakup up to date...
2- changed HKLM\SOFTWARE\HTC\AUDIOGAIN
...CODEC_GAIN_HEADSET=EE
...HEADSET_UPLINK_VOLUME=EE
...repeat for existing keys in
...HKLM\SOFTWARE\HTC\AUDIOGAIN1, HKLM\SOFTWARE\HTC\AUDIOGAIN2
...after reset i cheked and the keys where there and okç
3- windows media...headset...music...right louder than left...what??? yea, one channel louder than the other but not much louder than when i started...
4- as i didnt take note of the original values of the reg keys i decided to do a restore with my sprite backup so the keys come back to standard...
5- here come the weird part...after the restore and the resets and so on...i go to the registry and the keys where in the original state...BUT...when i test it in windows media the volume where LOUDER than when i started this thing! (and both channel working at the same level)
6- i said to myself...yea, this is strange but i need a lil more volume...so i started the proccess again but using FF in the keys...changed keys...restarted...no left channel at all, only right (i guess left channel was way down to zero)...so sprite restore again...and yea...now i have a useable volume level in both channels! (and the values r in the original state)
so...this is extremely strange, can some guru explain me why if now the values r in the original state i have way louder earphones??
Related
Hi,
Just followed wiki page for upgrade of WM5.
However after flashing back it can boot successfully, after aligning screen and setting timezone, PDA Goes very very slow.
clicking start button and responce takes like 15 seconds :-(
any idea on what mistake i did ?
how to make it fast .. please help
In a few days that will be gone.
EelcoV said:
In a few days that will be gone.
Click to expand...
Click to collapse
didnt get you ?. you mean is it due to some bug in WM5 for BA ?
or
My procedure ?
I had the same problem on my first time upgraded WM5 on my BA.
Howver, I found out my problem was on Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
Step 11
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
Click to expand...
Click to collapse
This step is important, and if by any chance you missed this step, just do that instructions and change 2nd and 3rd option to yes and apply all the pathes from
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Patches_ChangeLog
Well it worked for me, I hope it helped to solve your problem.
Sorry if my english terrible.
Hi,
I make sured, the second and third are set to Yes, and after that press mail button.
to be sure, i just reflashed again, still same problem. Phone Funciton, is really slow, and cant even show ringing, when a call is coming
any help?
After installing WM5, your machine will be really slow. You need to apply the patches that are found at http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Patches_ChangeLog
A few tips for you:
Before applying the patches, make sure you disable ALL sounds, including the ringer on the phone (set it to vibrate) and keypad tones. Also make sure you disable Error Reporting, as stated.
After applying each patch make sure you power down the device, wait about 30 seconds, power the device on again and then do a soft reset to make sure that the registry changes take. This applies to any registry change on WM5, even in the future.
After all the patches have been applied, you should be able to switch sounds back on as you like and the device will be much faster.
One final tip: I've always used PocketPlus on my device in the past but I found that it really slows my phone down, especially on WM5 so I've had to uninstall it. I'm now running iLauncher instead, and although I prefer PocketPlus for functionality, the speed increase that I get with iLauncher seals the deal for me.
One of my problems is :
sometimes when the power is off in my B.A. i cant turn it on by pressing power button I had to reset
and when it is off i cant receive any call because it is not ringing and I don’t know if there is a call so I missed a lot of call lately that I don’t know about
please can any one help me with that
Yes,mine is the same as yours.
Any help please?
It seems that your machine hanged. Did U apply all the cab files on the first page?
wodonwong said:
It seems that your machine hanged. Did U apply all the cab files on the first page?
Click to expand...
Click to collapse
yes i did
and this power problem is not happening every time when the power is off
maybe ones or twice a day
One of my problems is :
sometimes when the power is off in my B.A. i cant turn it on by pressing power button I had to reset
and when it is off i cant receive any call because it is not ringing and I don’t know if there is a call so I missed a lot of call lately that I don’t know about
please can any one help me with that
Click to expand...
Click to collapse
Strange, I am using the helemi_C rom but I havn't experience any problem like this. May be you need to reflash the rom again with all fixes available. [/list]
I flash this ROM this morning and face this problem in the afternoon one time.
I have had this thing in my Himalaya with WM5 ROM a long time ago.
Don't know why.
Did U hard reset and clear all the previous registries?
Yes , surely.
with options No,Yes,Yes.
don't know if it can help but I had the very same problem with different roms. after some tests I discovered that this was due to the joypad at the bottom, the 'down' key made contact and was, in a way I don't know, kind of overriding the pression of any key, power included.
cleaning the contacts worked perfectly for me.
straniero said:
don't know if it can help but I had the very same problem with different roms. after some tests I discovered that this was due to the joypad at the bottom, the 'down' key made contact and was, in a way I don't know, kind of overriding the pression of any key, power included.
cleaning the contacts worked perfectly for me.
Click to expand...
Click to collapse
I am sorry but I don't understand what should I do exactly
i also have this problem, anybody can help??????
Same problem with Qtek9090 flashed with IvanV4R3_RAMDisk32_1
Hi guys,
In fact, I'm having the same problem after having flashed my Qtek9090 with IvanV4R3_RAMDisk32_1.11. (When the device is turned off (standby mode) for more than 5 minutes, it's impossible to turn it back on - only reset helps. While that state, when somebody rings my phone, they get "engaged" signal as though I'm talking on the phone. When you put the device into cradle - the computer indicates that there is a new device with some installing errors...)
Now, I've noticed one thing: there is a localization software from Paragon (LEng - Russian language pack for Pocket PC) - after having disabled that software, the device works well and comes back from the standby mode easily. Perhaps, that deals with some bugs in the localization software.
I guess you all have some localization soft on your BA (Arabic, Chinese, etc.) - try and disable it - let's see if that helps...
No i dont have any language pack on my PPC.
Using helmi 1.3 and this is what i have currently installed
E-TEN m600 Blue Dualer Skin
IdosPPC - (train schedule )
Resco Explorer
Resco Today Plugin
Resco Keyboard Pro
Helmi 1.3 NET missing FIle
SpbAirlands
Microsoft .NET CF 2.0 ENU-String
Socket Wi-Fi Companion
SpaceTime Mobile 2.0
Gray is right. I have tried 2 Chinese Localisation softwares, namely Monster Chinese V5.3 and CE-Star V2.8R2 and they both hanged the machine, especially before dawn, usually with the red LED flashing but BA hanged. Well yes, I am using the stupid MS Auto-Push on my BA! (Pocket Outlook is the least stupid email client available at the moment, FlexMail still needs much works to integrate with the WM5 interface) I have tried to disable MS Auto-Push while running Monster Chinese V5.3 and tested for 3 full days without hanging.
When I resumed the MS Auto-Push, the machine hanged again.
Interim findings:-
1. My BA hangs when running both Chinese localisation software and MS Push.
2. My BA seems to work OK when running Chinese localisation but not MS Push.
3. My BA seems to work OK when running MS Push but not Chinese localisation.
I guessed Notification of Email feature may have caused the hanging problem, I'll try to reduce the red LED flash duration from UNLIMITED to say 15 minutes. Will report my findings in due course.
In fact, I've installed an update for the language pack (LEng build 7928) and the problem disappeared.
So, I guess, you need to check if there is any buggy software on your PPC. ...Although the issue may be much deeper...
Good luck!
Hi, past night have installed Teksoft Speakerphone to simplify turning on speaker without using the old system of press long time the green call button, after installed have tested the apps in all the ways, but nothing happen...the speakerphone can't power on and like everytime only the old trick seems to be working....after that i want to remove them and go under setting-system-remove programs but the program list is EMPTY.......
and i have more than 15-20 apps on my pda....
after that i decide to connect with cradle and to try removing from ActiveSync, but the software can't connect and tell me to eject and reinsert pda on cradle to connect now, i have try 10 times but no way to syncronize with ActiveSync...
after that i can't install any file cab directly on the pda...give me
is there anyone who have the same problem BTW ?
or i am alone ?
regards
after too much time wasted in brainstorming and searching if registry has any error etc. i make the choice of making format+reset registry hives and now i have full control over my pda...
When I have the official ROM everything was fine. Then I flash my device with russian ROM from football (4pda.ru) and then I noticed that sound sometimes completely disappears (external speaker, internal speaker). Only reboot turned sound back and I got this bug every day 4-5 a day I need to reboot my device. Then I flash my mobile with Jugglah's ROM (4pda.ru) and the problem didn't gone away? Please could anyone help me in resolving this issue without flashing with official ROM (it's too slow-laggy to use).
rage_q3 said:
When I have the official ROM everything was fine. Then I flash my device with russian ROM from football (4pda.ru) and then I noticed that sound sometimes completely disappears (external speaker, internal speaker). Only reboot turned sound back and I got this bug every day 4-5 a day I need to reboot my device. Then I flash my mobile with Jugglah's ROM (4pda.ru) and the problem didn't gone away? Please could anyone help me in resolving this issue without flashing with official ROM (it's too slow-laggy to use).
Click to expand...
Click to collapse
I'm having the same no-sound-at-all issue sometimes. But this happens occasionaly when I disconnect the Bluetooth connection. After a reboot the sound is back... Anybody have the same problem?
I didn't use bluetooth or wifi at all...
still actual!
i have the same problem evan without using bluetooth on a origanal vodafone ger rom
I had the same problem using Vodafone GER ROM
then BEPE 99d different Radio
now Duttys V1.9 again with different Radio
still know luck
I thing its getting less but it is still very irritating
I slowly believe that it's a hardware problem.
can anyone confirm this???
thanks
lucky
hope this can point to a solution
I have the same problem using original ROM on my Touch Pro (having some tweaking apps installed)
I can kind of "reproduce" the "dieing of sound", think it's because of the volume setting whitin the touch 3D interface...
have Resco installed and it comes wit a regeditor
when the sound died I did go to HKCU\ControlPanel\Profiles
there are two settings (Default) (value not set)
and ActiveProfile.
What I discovered was that when sound dies the setting of ActiveProfile REMAINS on "Silent" (kind of LAG in the sys/TF3D volumesetting??)
putting my sound settings in TF3D volume on silent and edited the reg key to "Normal", then raising the volume and I got the sound back.
I hope you out here can test and confirm this, because is's just shooting with blanks now.
I think though that this is worth saying.
so are you guys hard resetting after all these flashes? i bet one will fix it.
Blazeitup123 said:
so are you guys hard resetting after all these flashes? i bet one will fix it.
Click to expand...
Click to collapse
man, after reflashing hard reset going in automatic mode...
p.s. In htc service staf sad me, that in my case this is profiles problem - phone activate hands-free profile... try GDOG solution...
Hi Guy's, I seem to be experiencing the opposite problem to what everyone else on this forum is experiencing.
Whenever I make or receive a call, the ear volume is always set to the highest which is too loud especially when in quiet environments as everyone around me can hear what the other person on the end of the line is saying, plus it almost deafens me.
Even when I turn the volume down during a call, it always defaults back to maximum volume during the next call.
I looked under the "volumes" section in the settings but can't seem to see an option for this.
Can anyone help me on this please.
Thanks
mister__p said:
Hi Guy's, I seem to be experiencing the opposite problem to what everyone else on this forum is experiencing.
Whenever I make or receive a call, the ear volume is always set to the highest which is too loud especially when in quiet environments as everyone around me can hear what the other person on the end of the line is saying, plus it almost deafens me.
Even when I turn the volume down during a call, it always defaults back to maximum volume during the next call.
I looked under the "volumes" section in the settings but can't seem to see an option for this.
Can anyone help me on this please.
Thanks
Click to expand...
Click to collapse
Something sure seems to be messed up, try backuping your data and then do a factory reset and check if the issue is associated with the rom itself, if thats the case you should install some other rom or try any mod that modifies your musicfx, like purexaudio.
Sumedha Kapoor said:
Something sure seems to be messed up, try backuping your data and then do a factory reset and check if the issue is associated with the rom itself, if thats the case you should install some other rom or try any mod that modifies your musicfx, like purexaudio.
Click to expand...
Click to collapse
Thanks I forgot to mention that I am running the stock firmware that came with the phone. It was on android 4.1 when I purchased it and I have since updated it to 4.2.2 but the problem persists.
I would like to know if this happens with other Xperia Zs. Does the ear volume stay on the last level you set it to or does it reset every time a new call is made?
Once I know what it's supposed to do, I will try a factory reset before getting involved with custom roms.
mister__p said:
Thanks I forgot to mention that I am running the stock firmware that came with the phone. It was on android 4.1 when I purchased it and I have since updated it to 4.2.2 but the problem persists.
I would like to know if this happens with other Xperia Zs. Does the ear volume stay on the last level you set it to or does it reset every time a new call is made?
Once I know what it's supposed to do, I will try a factory reset before getting involved with custom roms.
Click to expand...
Click to collapse
No, Its supposed to stay exactly where you want it to be. Don't worry about anything, just install a recovery like TWRP or CWM first, make a full nandroid backup before you decide to do anything messy so that you can always return to where your z is right now to the very exact state. I would recommend you that you should try a custom ROM instead too, monxDIFIED and EXCELSUS both of them are very good custom roms based on stock.