Database Develop

Nokia HS-11W bluetooth headset doesn't pick up the phone

Hi,
I'm trying to connect Nokia HS-11W bluetooth headset to my xda2i.
When I do the settings thru bluetooth manager , it sees the nokia device as a headset and when I look its status it says the connection is just fine.
So everything seems ok but when a phonecall comes the headset doesn't pick up the phone.No voices on the headset,nothing.It's like no device is connected the xda2i although it is.
I can't speak thru the headset when I make a call either.
Can somebody help me get rid of this problem pls?
Thx

sony ericsson HBH-GV435 BT headset with Alpine problem please help me

Hi
i'm trying to pair my Sony ericsson HBH-GV435 BlueTooth headset with my alpine
i'm sure the headset is on paring mode
i added the bluetooth headset in my paired devices without any problems
but when i try to add it as a hands-free/headset setup it tries to connect to the headset and then it says "service discovery was unsuccessful"
i have Jabra BT620s and i'm using it as a hands-free headset and a stereo headset without any problems
but when it comes to the sony ericsson HBH-GV435 it doesn't work :S
please help me
thank you
UPDATE : in the connection wizard i choosed (Explore a bluetooth device to discover the services this headset offers , after choosing the headset it says (retrieving services ...) after that it says that this device does NOT offer any usable services.
keef on mind that i updated my bluetooth stack to make it A2DP enabled and gives also the ability to connect bluetooth keyboard.
i don't really know whats the problem between this headset and the Alpine Bluetooth Stack :S

**HELP!** Problem with SE DS980 Music Streaming with TyTN II

Hi guys,
I have experienced a nagging issue with my SonyEricsson DS980 bluetooth headset.
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
I have done several hard resets and also tried A2DPfix, Kaiser Tweak (Changing bluetooth quality to low) and also Jetware Bluetooth Extension with the supposed plugins, but to no avail...
Can someone help?
Can any registry hack / software help?
I have tried some tweaking with the BitPool and MaxSupportedBitPool but still din't work for me.

http://forum.xda-developers.com/showthread.php?t=352297&highlight=headset+disconnects
let's move this problem to one thread

caulirick said:
Hi guys,
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
Click to expand...
Click to collapse
I also have a DS980 BT and same **** happens with me.
Last time my HTC music played crashed and all I could do was a soft reset Have tried different settings with no success.
If I'm not using the player then DS980 seems to disconnect after a call, at least the BT icon is gone.
However, when next call is received/initialized BT icon appears again and headset is connected.
Don't remember if it's still there after second call though.

Same problems I have too...
But my DS980 performs intermittently. Sometimes when a call comes in during playback, it flawlessly switches to the phone call, and then switches back to music after the call ends... However, this only lasts for a little while, and then it reverts back to the usual fault (headset disconnecting after a call and music plays through the device's speakers).
Sounds really silly... wonder what is causing it...
Please, is there someone here that can help us out? Must be some Bluetooth tweak that allows the device to rediscover the headset after a call....

Bug: Bluetooth Headset not *really* connected on boot-up

I've been experiencing this problem on my TyTN II with the original ROM. The programs I have installed which may be affecting the problem are:
-CooTek TouchPal 2
-TIInit_4_2_38 Kaiser (Official HTC Bluetooth Fix)
- duttythroy v3 Voip Setup
- Microsoft Voice Command v1.6.17913
Here's the problem:
- boot up the TyTN II (after being completely powered off) or toggle Bluetooth power off & on, with paired bluetooth headset within range and on
- Go to Phone screen. Headset icon is there indicating that the Bluetooth headset is connected.
- Press talk/send button on Bluetooth headset to start Microsoft Voice Command or answer an incoming call.
Result: Headset beeps as expected, but nothing happens on the TyTN II. Voice Command is not initiated. Incoming calls are not answered.
Workaround: If I go to Start>Settings>Connections>Bluetooth... Tap & Hold on my Bluetooth Headset, then choose "Set as Hands Free" the headset beeps again indicated that it made a connection. After I do that, all is as it should be! I can activate Voice Command, and answer/end calls with the Bluetooth Headset. I should not have to set my Bluetooth Headset as the Handsfree device everytime a reboot or toggle the Bluetooth power status.
I suspect it might be the Voip implementation, or the HTC Bluetooth "fix" but haven't done a hard reset yet to test.
Has anyone else had this problem? Does anyone know of a solution??

What headset are you using? I have the same software (except ROM) as you and haven't experienced this problem. I can SR with headset on and it will reconnect once the device reboots.

I tried it with the Nextlink Invisio G5, and Bluespoon AX2, both of which worked properly with other phones (HTC P3300, Nokia N95, etc., etc.,). I can try other headsets, but I'm pretty sure it's the phone software.
If your Voip and MS Voice Command are the same as mine and everything is working properly, maybe it's the HTC Bluetooth "fix". I guess another hard reset is in order soon.

WM6 Bluetooth Trouble

Since I upgraded my breeze to WM6 my handsfree bluetooth has not been working right. I have a JVC KD-BT1 bluetooth carradio/headset
I can pair with it and I see battery status, antenna signal and even the phonebook. When a call comes in, the radio sees it and then it mutes.
But there is no sound (microphone and speaker) on the radio. The microphone and speaker on phone keep working like there is no headset
I looked around and found out that microsoft uses a new bluetoothstack in WM6.
This is not compatible anymore with some headsets.
So there are sometimes these kinds of issues.
The best way to solve this is to get an firmware update of your BT headset.
I also found this alternative:
Change the registry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys\COD
from:
5898764(Decimal) "Telephone (Smartphone)" (default)
to
5374476(Decimal) "Normal phone"
For me, this didn't work, because I couldn't get it to pair with the 5374476 value.
I changed it back and the I could pair fine, sadly with the same result.

Bluetooth problems
I also have some troubles concerning bluetooth and my handsfree kit. I also tried to change the HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys\COD settings but it didn't help.
I cannot make a phonecall using my carkit (Parrot CK3100). It does mute the radio, but the phone conversation is still on the phone.
I have one workaround. .... When I use my GPS receiver and software actively, I CAN make a conversation by using the carkit....strangely.
But then the GPS stops during the conversation.
None of these problems are present when I use WM5, all WM6 and above ROMS have these problems..... Anyone?
Downgrading is not an option to me