Hi, was wondering if anyone has a 2.26 rom and can backup an SD image. Here are the instructions on doing it. ftp://xda:[email protected]/Wizard/DumpROM/How_to_DumpROM.txt
Please. This would also create you a backup you can save in your computer.
Also, please backup your minisd before doing this. Thanks
Clem
uh.... which 2.26 rom there are like 15 now.. and may i ask why?..
any 2.26 rom would do. The reason is I flashed 3.2 rom and lost my USB connection (I think it might be the connector itself since it got loose and I glued it to mb, but it was syncing for a couple of days after the 3.2 rom update) and I want to flash back to 2.26 tmobile or any would do. Thanks.
bump, any help pls..
bump help pls
bumpppppppppppppp
Related
HAS anyone uninstalled or overrided IMATE UPGRADE rom and reverted to original CINGULAR 8125 ROM? IF so, please list steps. I'm within 30 day period and don't want to send back with HTC and IMATE info and splash pages
Thanks
same here.. please help someone.. someone...
i had the same issue, and didnt find original, but for what its worth, exchanged my 8125 with no problem with i-mate rom.
good luck!
IF you can find someone with an SD backup (you shoulda made one when you started screwing around!) this is trivial to do.
Otherwise its somewhat of a PITA......
could you please outline the steps needed to accomplish this simply?
I am currently back at the cingular rom, but I could not restore the extended rom.
Basic rundown, After screwing around witht eh imate rom, decided to try to go back, found out I could not.
There is a particular issue with imate locking the extended rom, and problems running awizard and lokiwiz on a imate rom.
So, I went a round about way (suggested by someone else).
I used the tmobile uk rom (comes with same installer as teh iamte one), once that was installed, I ran awizard, which ran fine, and restored my cingular rom and splash screen (this is of course assuming you made a backup of the rom the first time around).
Only thing I cannot do, is restore the cingular extended rom.
Wondering if anyone can help,
I have an 8125 which I CID unlcoked and SIM unlocked and upgarded to the latest official Cingular ROM.
I then downgraded back to the original shipping rom and RE-CID unlocked the phone.
Then I loaded the 2.26 T-mo ROM and the phone just hung at the splash screen.
So I went into the bootloader (camera held Down) and reloaded the factory ship 1.8 ROM and now it's hanging on that splash screen.
Can anyone offer any help? Reply, PM, e-mail [email protected]HING to help!
Thanks in advance!
Marc
You can try to install my 2.26.10.2 Rom from www.molski.biz
Regards,
Molski
Molski rom didn't work
Molski,
Tried your rom, loaded, but now I'm hanging on your splash screen.
I did also try a hard reset and I get the format failed.
Anyone else got any ideas. Can't find a ROM that will get past the splash....
Marc
I'd downgrade to the 1.05 and take it from there.
Still dead..
I've tried a number of roms.. Buttons 1.05 custom rom, that didn't work, and the one being the K-jam K-JAM_WWE_1010903_106_10110_ship.exe from the XDA ftp site.
I'm still hanging on the splash with the following data:
IPL 1.01
SPL 1.06
GSM 01.01.10
OS 1.1.9.3
And a hard reset still gives a format is failed.
Any more ideas? Please?
Thanks a ton
Marc
Need SD image
Ok...none of the RRUs seem to work, so I'm desperate to try the SD card path, I downloaded the image on the FTP server, but when I load it onto the CD card with NTRW I get the "parameter is incorrect" message. I've ignored it like poeople say.
I Insert the SD card, get to the bootloader, but get no indication that it sees the rom image on the card, I've done it with and without USB.
Can anyone offer some direction, I've read many a post out there, but can't seem to figure out where i'm going wrong. Perhaps someone has an SD backup image they could FTP to me, I have an FTP server avaialble.
Again, thanks for your help,
Marc
UnBricked
While I didn't get much response, I still want to thank the group as reading about 100 posts and taking bits and pieces saved my bacon. I did a successful SD backup of an 8125 with my laptop at a Cingular store...very cool reps and reloaded it on my brick.
If anyone needs an SD backup image of the Shipping 8125 ROM or the 2.25, let me know and I'll FTP it to you.
Thanks,
Marc
mlampcov
I need sd buckup. Now my wizard hung at splash screeen, only way to revive it is the sd backup.
Please tell me where to find the sd-backup.
Hi, could someone please upload an SD image of 2.26 ROM, this could help out a lot of people whose miniusb connection won't sync. Thanks
Clem
bump...pls help
help..anybody pls make sd backup image of 2.26 rom, Thanks
clemsyn said:
help..anybody pls make sd backup image of 2.26 rom, Thanks
Click to expand...
Click to collapse
I really dont think this is possible. I could be wrong (won't be the first time)
I'm not sure if this will work and unfortunately I really have the time to research this. I believe that the bottom line is that if you foolishly flash a G4 device with a G3 IPL/SPL you're screwed. Sorry!
I have "bricked my G3 phone phone and my USB wouldn't work.. wouldn't get past the initial splash screen... actually only showed the IPL and SPL with no OS or GSM. I tried without success to reflash but it wasn't recognized.....
My thread regarding the Near Bricking ...
Hope I was of some help!
sd backup image
Thanks for the info guys, but my phone actually works but using the beta 3.2 OS. I wanted to downgrade to 2.6 but I think it my usb connection might have been messed up (not sure) by the 3.2 rom. What do u think?
Hasn't happened to me and trust me I doubt if many people flash or hard reset their phones as much as me, but the exception of a few I've run every ROM available here along with a few custom ROM's that aren't and haven't even had a USB issue. When in doubt I downgrade yto the 1.05, twice if all the versions don't go to 1.xx and then back up to what I want. And sometimes one needs to flash a ROM twice, odd I know but I've seen it happen.
Good luck!
tried to flash it with this custom 1.05 rom but says connection of phone not detected, tried it 5x to no avail. Any advice? Can someone let me try an sd backup image of 2.26. Need help. Thanks
bump..anyone with 2.26 sd backup image?
bump..pls help
Ok...
awhile back, I updated my MDA with hacked ROM that made bluetooth better (bluetooth 1.2 i think). anyway, i had no problems with loading new ROM. IPL is 2.17
now, i want to update to newer ROM. as instructed, i downloaded new Tmobile ROM 2.26 and tried to update my MDA.
during the install, i get an error saying my nbk file is corrupt and cannot proceed. so i have the tri color screen and i have to reload ROM 2.17. so my problem is that i cannot update to a newer ROM without fixing the nbk files that are corrupt.
anyone have any ideas on this??? i need help please....
tia,
mike
Read and follow:
http://forum.xda-developers.com/showthread.php?t=298613
Just do everything it says and you will be fine... This will point you to the links you need
thanks...i have some more questions
1) i currently have a full backup of my stuff. if i reload the backup, will it interfere with my new ROM?
2) can you point me to where i can find wm6?
again, thanks for your help....
-mike
1). Yes it will interfere with your new ROM.. not stable anymore
2). Just search around and you'll find plenty.. trust me
ok...went thru the procedures and i am now dead...
not dead really but my mda works but it at Button 1.05 ROM. i cannot write a new ROM...everytime I try, my phone powers off...no tricolor screen.
my IPL is 2.17 and my SPL is 1.01.000
i was trying to get IPL and SPL to 1.XX in order to write Tmobile 2.26 ROM.
anyone, please help!! does anyone know how to manually get to the tricolor screen?
thanks,
mike
Reset while holding the camera button
I have a Xperia x1 from vodafone bought today, Now I'm gonna Hard SPL it then microsd flash it with Touch-IT experience 3.01, but Should I do the ROM Touch it flash first or the Radio flash first? and can you explain each step of the way to me? sorry Im a bit thick
Hardspl the phone, then flash the phone, the latest radio is built into it.
WC
1.10.25.18 Is the radio rom I downloaded but didnt install yet. Im still waiting for an answer as not to brick my phone, this is the step Im taking tell me if its correct.
1.Hard SPL the phone
2.Micro sd flash phone with 3.1 Touch It Experience ROM
3.Then micro SD flash it again with the 1.10.25.18 radio rom
If thats not the correct way tell me, Thanks
That radio is included in the rom as it is based off of the X1a NAM original rom. No need to flash radio.
WC
thanks, Now my only problem is finding a Facebook, MSN and Youtube application for it and I cant close activesync on the device it keeps opening