Related
I've tried to download the ROM, but HTC tell me this "Sorry, this software download is not suitable for your device".
Maybe my device s/n number is not correct.
Maybe someone who has the correct s/n could download this ROM~
Just tell you guys the news~
http://www.htc.com/europe/SupportDownload.aspx?p_id=174&cat=2&dl_id=537
Caxio's and frednd's DownLoad Link--(I wanna say THANK YOU VERY MUCH!)
See page3 #21 & #23
Filename is :
HTC Touch 3G_MR2009_RUU_Jade_HTC_Europe_2.32.401.2_Radio_Sign_12.41.30.16_0.41.30.12_Ship
edit:
on booting the last red line (after radio and protocol) now says :
D 2.32.44800
Date (which shows after first boot) after screen calibration is now set to 25/03/09
(in settings / about) Build : 5.2.20771 (20771.1.4.6)
(in settings / device info) : rom version 2.32.401.2(44800)
ON customization after first boot if scaned for wifi networks and poped up a message about available networks
Ht845kh14923 :d
o2p63 said:
Ht845kh14923 :d
Click to expand...
Click to collapse
This is for italian version.
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
It seems HardSPL 1.40oli and this 2.32 rom don't work very well.Very sluggish and phone can't turn ON even after 2 Hard resets.
What is your experience???
Do not install if hard spl
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Could anyone check, if the gps-support has been improved?
km
lexx2009 said:
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Click to expand...
Click to collapse
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
update : Jade is fine now. New SPL is 2.32.0000 . More testing to be done.
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
lagoskon said:
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
Click to expand...
Click to collapse
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Myster said:
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Click to expand...
Click to collapse
This is on the Hard-SPL page along with the Oli version
http://forum.xda-developers.com/attachment.php?attachmentid=166262&d=1236988725
GPS seems to work fine now, also the scroll behavior of opera is better
km
It is annoying that hardspl doesnt work with this upgrade of jade.. can't built a rom now with the new oem. It's all newer than the iolite versions, but still doesnt include Footprint
Any changes in Manila? New tabs? Calendar? Stocks? Changes in the contacts?
Hi
What is the Radio version in this new ROM?
I have just applied the version from here and if this contains the old Radio then I can hold off for now until hopefully a compliant Hard-SPL is made, I can live without Opera being perfect.
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
nereus114 said:
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
Click to expand...
Click to collapse
Install a different rom from this forum-> Shut down your jade, unplug it. Hold down "volume down button" and ""power on button" to get in to boot mode. now start to flash another rom.
when finished you can install stock spl and then install this new rom
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
jarel said:
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
Click to expand...
Click to collapse
that's right.. but i think it's in one of the drivers. using the old drivers and the new oem/sys makes it possible to run it with the current hardspl.
radio in this rom 0.41.30.12
no changes in manilla tabs, don't know what changed but it's newer
Hi,
I'm trying to upgrade my radio rom. At first everything seems fine but after the upgrade process is at about 30%, I get error no. 114. I think that maybe a part of my rom is broken, so I'd like to change the allocation of my roms. I'd like to have the extented rom part as new radio rom and vice versa.
Is that possible? If yes, how is it done?
thx for your help
PECK
sorry to disappoint you, but no, that is not possible.
start the other way around, do not try to bypass a problem by creating a new one, try solving the problem first. why would the radio rom abort in the middle of the upgrade process?
- do you use the right upgrade tools?
- do you use the right radio rom?
- did you take care of everything else there is about upgrading a rom (bootloader, active sync kill...)?
- are you able to flash another os rom?
...whatever comes to mind when flashing roms, because this problem will not be any different after all.
@ chef_tony:
I've no problem with upgrading the OS or the extented rom! thats why i think that maybe the flash chip is broken!
I tried many different upgrading tools, even one of yours!
I don't know the current language id of my device! Originally it was a german XDA III! How can I check the current language id and how can I change it? is it possible that I have this problem because of a wrong language id?
thx in advance
PECK
i would guess it couldn't have anything to do with the country id, error 114 is radio rom update error.
btw, you get to see the inofficial country id everytime you soft reset the device, and in the bottom right corner it says something like WWE, or GER, for instance. or, when you connect the device and run getdevicedata.exe from the ruu folder, which is done before the upgrade, to show you the "from:" and "to:" numbers.
but: i just got another idea.
do you actually take out the sim card, before trying to upgrade the radio?
is your device sim unlocked?
have you played around with different bluetooth stacks?
have you performed a hard reset before trying to upgrade the radio?
have you tried upgrading the radio from the stock o2 rom wm2003?
ok, that was more than one idea, and downgrading seems like a lot of work, but it is worth a shot. if you spend days flashing (or trying to) over and over again anyways, you might as well try that, would mean 2 extra upgrading sessions, but what is that, like an hour?
oh, and what radio rom does the device have now, stock? or is it a newer one already?
and why do you think you need to upgrade the radio rom anyways? phone not working, maybe the problems lie deeper and that could be why the upgrade process can't work in the first place!
"don't confuse an original symptom with the sickness from the drugs we gave him" as dr. house, would say
hi,
the device is unlocked! there was no sim card inserted during the upgrade; i just tryed with one but I get the same error at 32% progress...
it doesn't work with the original rom, also!
it would be fine if the stock rom was installed, but unfortunately i don't have installed any radio rom whatsoever!
windows mobile device information says that i don't have a radio rom and no protocol installed!
oh, for pete's sake, i'm sorry.
when i asked you about the sim card being inserted, i thought of taking the card out, if you hadn't done before, should have written that. many people have problems when having a sim card or sd card inserted, i didn't want to suggest to put one in! that can never do good, either nothing happens or it gets worse, i really shouldn't have forgotten that.
it doesn't work with the original rom, also!
Click to expand...
Click to collapse
yeah, but does the stock rom itself work? i mean, the stock rom is a so called baked rom, meaning it contains a rom, an extrom and a radio rom, while the cooked roms here only contain the actual rom, so the os. i mean, you could try and extract the radio from the stock rom and try and flash that. it would give you a radio back! or if that doesn't work either, try flashing the entire stock rom, if that works without problems and then you'd have a radio, it means that your issue is too strange to think about, but still you can delete the extrom again and flash another rom without harming the original radio.
wouldn't that be a step forward?
btw. what radio rom are you trying to flash?
if it is just one, you try over and over, are you absolutely certain, this is for the BA? which version is it? what was the original file name of the exe? where did you get it? have you tried re-downloading it, maybe the file is really broken!
hi,
i tryed many different rom versions, and i'm pretty sure they are for the blueangel!
do you know, where i can get a cooked rom for my xda 3?
first, to be clear about that, as mentioned before, cooked roms consist only of the operating system itself and contain neither a radio rom nor an extrom. so about every rom offered here is a cooked rom. but that won't solve your problem, since, as mentioned, there is no radio included. that is why i suggested for you to try the original radio from the shipped rom, and then the entire shipped rom, to determine, whether the radio rom flashes, when it comes after an nk.nbf rom, which would mean, that from now on, you'd have to "bake" roms yourself, by taking cooked roms and adding the radio, so to not lose it. when you can actually flash wm2003 you can also try flashing other radios with the original BAupgradeut, because in contrast to os roms, there should be no limitations to the radio roms, as far as i know.
Change WM german to english or spanish
Hi! I´m new in the forum, please i need some help, i have a qtek 9090 bought in germany so it has a windows mobile in German. Can you help me to change the ROM to an english or spanish version.
The info is:
ROM version: 1.40.01 GER
ROM datum:03/10/05
Radio version: 1.12.00
Protocol version 1337.42
Extended ROM version: 1.40.750 GER
Model: PH20B
Platform: PocketPC
IMEI 353030001525302
Can you explain me step by step or suggest me a page wuere i could find some instructions, i have another problem too, I don´t have a usb cable for it, please help me
Hi,
I'm using HTC TOUCH HD (orange). I bought this handset from Scotland it was locked with orange only but i Unlocked this handset in india and now i'm using this handset with vodafone India.
Now this handset works gr8 for me but still i can see some settings are map with orange only. I heard if i update with international English ROM then my problem will get solved.
I have no idea about updating ROM. I read lots of blogs even i read on xda wiki also but not sure as its looks like if i update my ROM then i may lose my original ROM.
I have few question:
1. How to choose correct ROM for my handset.
2. Which is the right tool to take the Device backup.
3. If i'm unable to update with new ROM then will i lose my Original ROM.
Hereby i'm sending you my current ROM Version and release date
Current ROM Version: 1.1961.1 WWE
Operator Version: 34.119.1.611
ROM Date: 11/25/08
Radio Version: 1.09.25.14
Protocol Version: 52.49a.25.26U
Your help will be highly appreciate.
Thanks in advance.
I suggest not doing it. If you can't read and search, then you can't flash a ROM.
hey dear. i also got my handset from UK with locked with orange. If u want to upgrade simply go for Cooked ROM's. Those original rom's are crap and cant use the full potential of ur handset.
I would suggest u go for Energy sense 2.1 21898 version.
u need to do just few things in order to flash a cooked rom. if u r ready then do let me know
the best way to take a backup is using PIM backup software
re ur 3rd question. once u flash a cooked rom u will never want to go back to ur original stock rom.
send me a pm whenever u r ready and confident to flash ur phone
apatni said:
Hi,
I'm using HTC TOUCH HD (orange). I bought this handset from Scotland it was locked with orange only but i Unlocked this handset in india and now i'm using this handset with vodafone India.
Now this handset works gr8 for me but still i can see some settings are map with orange only. I heard if i update with international English ROM then my problem will get solved.
I have no idea about updating ROM. I read lots of blogs even i read on xda wiki also but not sure as its looks like if i update my ROM then i may lose my original ROM.
I have few question:
1. How to choose correct ROM for my handset.
2. Which is the right tool to take the Device backup.
3. If i'm unable to update with new ROM then will i lose my Original ROM.
Hereby i'm sending you my current ROM Version and release date
Current ROM Version: 1.1961.1 WWE
Operator Version: 34.119.1.611
ROM Date: 11/25/08
Radio Version: 1.09.25.14
Protocol Version: 52.49a.25.26U
Your help will be highly appreciate.
Thanks in advance.
Click to expand...
Click to collapse
it is a real simple process and once u do it u wont fear flashing it again & again
sorry for late reply Thank you so much for ur positive reply.
Could you please let me know from where i can get the currect ROM for my handset?
also please tell me who u did it with ur HTC TOUCH HD and does and don't if you have something before flashing ROM.
OK I have some time so let me try to put it as simple as I can.
First, there are 3 firmwares:
SPL -- This needs to be hacked to be able to change to any ROM
ROM -- You have the HTC official one and cooked ones
RADIO: you have 1.09, lastest are 1.13 / 1.14 / 1.17
The safest way is to use USPL, since it does not modify the SPL. You can always flash a ROM again.
See: http://forum.xda-developers.com/showthread.php?t=462347
Download uspl_2.5.zip
Be aware that some antivirus flag the exe as dangerous, but that's because it contains an exploit for a buffer overflow.
If you're using Vista or 7, you need to change the drivers for HTC USB sync as explained on http://forum.xda-developers.com/showthread.php?t=291723.
Now power off the phone (long press power button)
Press volume down on the side, and power button
That should leave it in the Red/Green/Blue/White screen
Now connect it to the PC and run USPL
It should reboot and go back to the Red/Green/Blue/White screen but now it says USPL
The phone is ready to flash any ROM or any radio now.
Official HTC ROMs here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
is the last one on the web, it works fine. Does not have the lastest versions of everything but it works fine.
In the forum you have links to many cooked ROMs, based on Windows Mobile 6.1 and 6.5. WM 6.5 takes more RAM and it's slower than 6.1 (like Vista and XP). But most ROMs today are WM 6.5.
I have been used these two in the last months:
http://forum.xda-developers.com/showthread.php?t=460640
http://forum.xda-developers.com/showthread.php?t=648831
The recomendation is to flash the HTC stock ROM first (that will also update the RADIO to 1.13.25.24). Then if you want to experiment, you can flash a cooked ROM.
Well,
My opinion: once you are addicted to ROM, I think HSPL would be the best way.
You can flash a ROM within 5 minutes or less. Also, using task29 is even more easier.
Cheers, my friend.
vcespon said:
If you're using Vista or 7, you need to change the drivers for HTC USB sync as explained on http://forum.xda-developers.com/showthread.php?t=291723.
Click to expand...
Click to collapse
Could somebody tell me in an easy way how to do this? And when do i do it? Do i have to install the old drivers again after flashing? Where can i find the drivers to use, i use windows 7 32 bit
Thank you from Forca
wow you make it very easy for me now this weekend i'm gonna try all this.
I really appreciate your effort to explain me in details. I think its quite easy to do.
vcespon said:
OK I have some time so let me try to put it as simple as I can.
First, there are 3 firmwares:
SPL -- This needs to be hacked to be able to change to any ROM
ROM -- You have the HTC official one and cooked ones
RADIO: you have 1.09, lastest are 1.13 / 1.14 / 1.17
The safest way is to use USPL, since it does not modify the SPL. You can always flash a ROM again.
See: http://forum.xda-developers.com/showthread.php?t=462347
Download uspl_2.5.zip
Be aware that some antivirus flag the exe as dangerous, but that's because it contains an exploit for a buffer overflow.
If you're using Vista or 7, you need to change the drivers for HTC USB sync as explained on http://forum.xda-developers.com/showthread.php?t=291723.
Now power off the phone (long press power button)
Press volume down on the side, and power button
That should leave it in the Red/Green/Blue/White screen
Now connect it to the PC and run USPL
It should reboot and go back to the Red/Green/Blue/White screen but now it says USPL
The phone is ready to flash any ROM or any radio now.
Official HTC ROMs here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
is the last one on the web, it works fine. Does not have the lastest versions of everything but it works fine.
In the forum you have links to many cooked ROMs, based on Windows Mobile 6.1 and 6.5. WM 6.5 takes more RAM and it's slower than 6.1 (like Vista and XP). But most ROMs today are WM 6.5.
I have been used these two in the last months:
http://forum.xda-developers.com/showthread.php?t=460640
http://forum.xda-developers.com/showthread.php?t=648831
The recomendation is to flash the HTC stock ROM first (that will also update the RADIO to 1.13.25.24). Then if you want to experiment, you can flash a cooked ROM.
Click to expand...
Click to collapse
By the way, I'm back to Topix 3.5 WM6.1 Manila 2.1.
The difference in speed with a WM 6.5 ROM is too big. People should really consider give this one a try and see what I mean. On WM 6.5 even typing in keyboard is slow. Here you start with 37% RAM used, not 52%. And while using Opera, you have 55% RAM used, not 80%.
No way I'm going back to WM 6.5.
ok, I'm closing this thread now. In future could everyone direct users looking for flashing help to this thread.
Thread closed
X1 problem to hardSPL for newer SPL version 0.78.0000
Hi, I am ALi , sorry to bother, but just done some HardSPL on my X1,
last time the SPL ver was 0.78.0000
i read many of method to flash a newer ROM must HardSPL first their X1,
the problem is, I had already HardSPL it to SPL ver 0.72.0000, the process was a success
but
it stucked/bricked at tri-color mod, so i had it settled from
forum. xda-developers. com/showthread. php?t=455553 thread reported by MALIK,
i noticed that before down grading my X1, the ROM ver was UK_GEN_R3AA010,
but
after HardSPL to ver 0.72, i cant flash the original ROM UK_GEN_R3AA010 back, instead of that only ROM UK_GEN_R1AA017 are working with my current flashed SPL ver 0.72.
I tried to Hard SPL to 0.52 Olinex version (i didnt find any 0.72Olinex!! just 0.52 Olinex, where can i found the 0.72 ver of olinex?? does the 0.72Olinex really exist?? i am so much confiused now and really tired of trying to make it work in almost a week!!) so many time but fail, by USB, by SDcard (also try to replace my SD-HC4gb to Nokia SD 256Mb) neither of that method work!!
please help...
i am desprate to implement newer ROM on my X1 so called Kovsky....
please admin/engineers/developers help.... my head are getting bolder than b4 huhuhuuuuuu........
-ALi
Terengganu, Malaysia
p/s: i am uploading some of my pic shot while the problem persist right now to photobucket, but i am affraid that i didnt have any permission to attach th pic since i was a newbee....
The hardSPL 0.72Olinex can be found here (X1_HardSPL_v1.zip):
http://forum.xda-developers.com/showthread.php?t=431218
Also there is a detailed describtion on how to hardSPL your device:
http://forum.xda-developers.com/showthread.php?t=431218
For questions you can try the search button here, if you can't find any on this subject (which I doubt, because the question has been asked more than once in the thread) reply to the thread:
http://forum.xda-developers.com/showthread.php?t=431218
I've flashed my X1 with hardSPL and back to stock SPL a number of times, never without succes. From 0.720000 to 0.72Olinex to 0.720000 and from 0.780000 to 0.72Olinex.
So when you can't hardSPL from your pc there must be something wrong with the connection between pc and X1.
If you want a newer ROM with stock SPL, connect your phone with stock SPL 0.720000 to SEUS and SEUS will automatically update SPL to 0.780000. After that you can flash R3A ROM.
The other way through hardSPL and the manual download of R3A from PavelX1's sticky.
I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???
motok said:
I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???
Click to expand...
Click to collapse
Download you stock ROM from PavelX1's sticky thread and flash it...
Tnx you saved me from hours of searching
Hi Lokhato,....
thankx for the advice,... if ou wont tell me about the SEUS, sure my X1 i declared it DEAD!!! I was accidently HardSPL it to 0.72.0000 i think...., because of i tried so many times to HardSPL the OLinexSPL to my X1 but it aint workin. but then when i replace the RUU_signed.nbh that got version 0.72.0000stockSPL it worked AND THEN it STUCKED at the boot screen says that please wait, continue to upgrade ROM.... damn i resolved it...
so my step on recover to the latest stock SPL 0.78.00 are like this,...
1. download the SEUS from XPERIA website.
2. try to READ and FOLLOW the instruction stepbystep. even whenever the application ask you to restart the PC/LAPTOP, please make it done so....
3. whenever SEUS asked u to enter the bootscreen, MAKE SURE you take out the SD out from your phone. and let the SEUS flash the OriSPLver 0.78.0000
4. then it blinks several times after the progress bar finished, and it also stucked at bootscreen saying to continue updating ROM.
5. in this situation, please flash back your ROM with ROM UK_GEN_R3AA010 not the R1 or R2 ROM. so to manually flash the R3 ROM, copy the R3 image file to your freshed format SD and named it kovsimg.nbh
6. so put the SD in X1 and soft reset the X1 by pressing the reset button with your stylus at the back panel of X1.
7. let it load the image whenever it enter the boot screen again
8. press the power button to confirm upgrade ROM.
9. it should state there SUCCESS!! and you must HARD-RESET the X1.
9. waitt...... and wait...... be very patient, take a break... let it run.....
10. you are DONE!!
enjoy your original flashed ROM,...
if you not like it,
from this point you can just simply HardSPL it to 0.72Olinex by downloading the X1_HardSPL_v1.zip
then go get another ROM and repeat step 5.
as my observation...
SPL 0.72.0000 can flash img from R1,
R2 I dunno can flash or not, never try it...
SPL 0.78.0000 can flash img from R3
HardSPL it to OLinex ver 0.72OLinex ver, then you r good to go to flash any ROM you like!!
damn what a hard week!!! at last i got it to flash the HardSPL on my X1
last but not least.... just want you all to know that i was doing those step above from my mom's laptop current spec was CentrinoDuo, mine that always hanging whenever try to flash any SPL was on SempronAMD Laptop + always BlueScreen error even after i freshed repair my .NetFramework ver3.5sp1. so if you facing any problem on SPL our X1, try to done the upgrading on another PC/laptop, i believe that Intel based processor was more stable than AMD i think...
Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?
Lokatho said:
Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
but
- last time my original 0.78.0000 cant do HardSPL
- after accidently flash the 0.72.0000 by using RUU but at the same time i copy the stock0.72 SPL to RUU folder,,,... or my mistaken to copy to SD also by renaming it to kovsimg.nbh i think, just cant remember at that time, and still cant HardSPL + hangging somemore....
- after SEUS updates to newer stock SPL 0.78.0000 like before it was very easy to HardSPL with 0.72OLinex..... wonder y.....
hmmm... CustomRUU??... i think if i try that method would always get the ERROR code rather then success huhuhuuu....
for now i just stick to flashing ROM using Nokia SD 256Mb if the img can fit it in....
thank you so much anyway bro...
u da man!!!!
Lokatho said:
Don't know if you can use the SD-card flash
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi
Several roms do have panel manager installed so there is a use for the X Button
in case it is not cooked in you can add it manually. Also XMapper is available for alternative uses of the button...
Finally, if Silent_UC is supported by the rom you can bulk install many apps, registry edits, etc. after flashing the rom or afterwards. Just search...
putrabiru said:
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi
Click to expand...
Click to collapse
hardSPL can be done without a problem from 0.780000. I did it several times after I brought it to repairs.
In post #5 in the EnergyROM thread you can find a link on how to install the panelmanager, from R3A and X2. This works with all roms which don't have the panelmanager installed.
Mod. edit: not dev related, moved to general
I am very happy now! Just managed to update my SE X1 after SEUS 0.78!. As others suggested downloaded R3AA010 (APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010), but used NBHUtil to extract ROM. That was a mistake! I simply renamed R3AA010 to Kovsimg and put it in my SD 2 Gb card. Ufff, after 2 weeks of endless reading the forums and thying this and that... Finally!!!!
So my problem is - I put android on my htc tytn II and it worked (well kinda) but anyway I decided to switch back to Windows Mobile...
I installed 1.27.x.x radio , found a Windows Mobile 6 ROM and put (Like in the instructions ) Kaisimg.nbh(renamed from ruu_signed.nbh) and Kaisdiag.nbh to my SD card and then started flashing... It flashed smth,rebooted automatically and started booting android again...
Then I hold again camera button + power+ reset and since then when I put EVERY .nbh file on my sd card and try to flash it it STUCK on "Loading.." If I try to flash it with USB It stays at 0%.
The only exeption is if I try to flash from USB the rom that I tried to flash before from my sd card.. then it starts 0%..1% and reboot the phone...
P.S: Please help me...I think my device is not Broken but I dont know what should I do to fix it...
To flash back to WM from android put your kaiser into bootloader (multi colored screen) Then connect to usb. Download any WM build that is recent (I suggest Phoenix 3 for this, you can flash whatever you want later). After you download it open and run the included RUU that came with it and it will flash it on there.
hmm, I also had experienced the similar problem on my 1st time flashing back to WinMo.
When you are trying to flash via USB cable and the process stopped at 1% I guess there is also a message about "Invalid vender ID" right?
and if the text in your bootloader (tricolor screen) doesn't mention anything about hard such as "3.29.0000" (not "3.29.hard")
then
you've lost your hard SPL that's why you cant flash any .nbh to your phone.
I had managed to solve this problem by flashing stock WM rom for kaiser. The rom also has to be suitable for your phone, I mean if your kaiser is originally from France, then use French kaiser stock rom. Or if you are using AT&T Tilt use kaiser cingular stock rom.
you can find the list of shipped roms for kaiser here :
http://shipped-roms.com/shipped/Kaiser/
If you still have the "invalid vender ID" error message, try another stock ROM.
Thanks man you're my hero! I though I lost my phone.. anyway i bought new one - Nokia 2730 Classic but Ill sell the kaiser...
Thanks Anyway ... you're god!
Have the same problem...
Firstly, I'd like to point that the reason for the hard SPL getting overwritten by an original SPL is NOT HAVING UPDATED HARDSPL to a newer version that prevents accidental overwrite. This is instructed in the previous steps before actually installing Android. That was my mistake (I had HardSPL 1.0 OliPof), and now I can't flash no rom to my Kaiser (which thankfully works quite well in Android).
What happens (please correct me if I'm wrong) is that "KAISDIAG.NBH" is a modified, standalone hardSPL that will flash to the phone the SPL that comes with the "KAISIMG.NBH" you put in your SD card with "KAISDIAG.NBH"). In my case, I used the WinMo 6.1 spanish version 3.29.412.0, which, resulted in my phone being flashed with the original SPL 3.29.
Now, it seems many users have fixed this locating the correct stock rom and flashing it in their Kaisers. But to others, like myself, nothing seems to work. I believe that this is because we not only need a stock rom for our specific Kaiser model, but also it has to be compatible with the SPL that accidentally got installed in the phone. The problem is what if such rom doesn't even exists?
I'm really thankfull for all I learned by reading the forums (and from my mistakes ) and I know I'm in no position to make requests, but here goes what I think could help the users like myself to fix this, if posible:
1) Guide to identify what model of Kaiser we have (maybe it's already there, I just couldn't find it)
2) Complete list (or lists) of stock roms (There are some around, those are easy to find I think, but it doesn't hurt to share different sources)
3) Something like a JumpSPL for Android would be more than awesome...
Thanks in advance to everybody, sorry for my own stupidity . Any idea or help would be much appreciated,
Daniel
hmm, I'm not sure if it has to be compatible with the SPL.
In my case, I was flashing a very old WWE stock rom which has original SPL 1.56.
I also had been very desperate because any stock rom I found seems doesn't work and I even didn't know where originally my kaiser came from because I get it from my uncle. So I tried to flash any WWE stock rom I could found but nothing works. I read from Wikipedia that based on my phone model (Kais100), this model was only sold as AT&T tilt for US. But the problem is my phone is HTC branded, not AT&T tilt. Well, based on this information I also tried to flash some cingular stock rom but the result was just the same.
After contacting HTC Customer care, I know more info about my phone. They told me that based on my phone product ID, my kaiser was originally shipped for US, but unfortunately they can't provide me stock rom for my phone model. So I searched myself but this time I had better objective : to search HTC branded rom but for US.
finally, after days of search. I've found the rom that is suitable for my phone. Its called HTC WWE Brightpoint US which has original SPL 3.29 at the bottom of the list on the website I told you on my previous post.
few weeks ago I also accidentally overwrite my HardSPL again, but this time I did it with the stock ROM which has original SPL 3.29. But this problem also solved by flashing the stock ROM I've found before via USB cable.
So, I guess it has nothing to do with spl version.
Keep tying don't give up.
Update: Step 1 completed! YAY
Using the serial number and some obscure google searching, I came to the conclusion my KAIS130 is australian. Cheers, mate!
I verified this by being able to download stock roms from the australian HTC site with my Kaiser serial number. But at the moment of writing this, have downloaded two roms and no luck yet. 5 minutes remaining for the third one... Wish me luck...
Daniel.
Well... Now what?
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
cuartetoraro said:
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
Click to expand...
Click to collapse
sorry to hear that..
well, extract the .nbh from exe and flash it via sd card is the method that made me overwrite my hard SPL in the first place.
hmm, did your phone comes with operator brand, such as three or something?
-Rif- said:
sorry to hear that..
hmm, did your phone comes with operator brand, such as three or something?
Click to expand...
Click to collapse
No, it's HTC unbranded. Now, something strange here: the label behind the battery has the serial number: HT830GB06075 and the P/N (guess it's part number) :99HCY194-00, but to the left of the camera, another label with the part number: 36H00563-00M and below says DATE:061107(TB02)/US.
I don't know if that's normal, but it caught my atention because my phone seems to have been dissasembled (little label over screw is teared). Maybe my Kaiser isn't Australian after all...