Database Develop

SIM Unlock help...

Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated

fmervin said:
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
Click to expand...
Click to collapse
Did you actually read anything or did you just start hacking away ? I will cut and paste a few items out of that thread, so that you don't have to actually read it .
PLEASE READ THE *FAQ* BEFORE FLASHING OR ASKING QUESTIONS!!!
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again

Thanks for the reply
denco7 said:
Did you actually read anything or did you just start hacking away ?
Click to expand...
Click to collapse
As a matter of fact I did read that more than once.
denco7 said:
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
Click to expand...
Click to collapse
As you can see I'm a bit of a newbie here, so wasn't too sure if I did need to flash to a new rom. But I did anyway. And the call problems still remain
denco7 said:
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
Click to expand...
Click to collapse
I've been through this link as well and I was contemplating installing the latest version of the HTC WM6.1 ROMS (version 3.34.721.2, radio version 1.70.19.09) available at http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs However I was not sure if this would be ok and (at the risk of sounding extremely dumb) I was not sure what WWE stood for
denco7 said:
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Click to expand...
Click to collapse
I maintained the default that was given by the unlocker for the CID (I think all zeros). Do I have to change this as per the ROM image? I don't mind re-doing this again it's a relief that my device isn't busted

No your phone isn't busted. Go into bootloader and check what it says next to spl, if you followed Mark's steps, it should say 3.29 Hard. If that is what it says ,then you can flash any Kaiser rom you want. If it doesn't then start over again.
WWE stands for World Wide English and those roms are all in English. That rom you picked will be fine, if you do not wish to explore the fine world of custom roms ? Maybe later.
You only have to CID unlock once by following the steps, not at every rom flash.
No sound means wrong radio, 6.0 roms need 6.0 radios and 6.1 roms need 6.1 radios. If the rom has a radio in it already then flash away.

Thanks Denco Flashed the ones I mentioned and it works perfect. Can't believe I actually have a working device Thanks for all your help, really great.
Now to sync my data to my new (second hand) htc and I'm good to go

Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?

Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.

fmervin said:
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Click to expand...
Click to collapse
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.

Mister B said:
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
Click to expand...
Click to collapse
Wow, thanks for that, I was looking for a valid serial through which I can download from the htc uk site One question I had is do I install the radio which I download from htc? Or do I keep the one I have already flashed? The one I have flashed yesterday seems to be a later version than what I've downloaded from htc
denco7 said:
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Click to expand...
Click to collapse
1. I keep hearing on this forum about Hard SPL, I'm not sure what this is used for or why it is required but I followed the instructions and it seems I had installed JumpSPL1.56-KAIS.exe. Now, since then I had flashed the rom, so do I need to reinstall this again? Is there some other one I should be using? I come across different versions on some threads. Also, how can I check the version of HardSPL I have?
2. When I view the memory (under settings) it shows me Storage and Program. However, I can't seem to see any storage area in file explorer. I know in my old xda 2i, there used to be a separate storage area. The reason is because some of the apps I install are quite bulky for example lexisgoo english dictionary (the dictionary files themselves are about 18mb) and this fills up the main memory. How can I install this in the storage memory? (not storage card since I sometimes swap storage cards)
Sorry lot of questions I know, but I'm a newbie and all help will be greatly appreciated

The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.

Mister B said:
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
Will do, the HK version seems very stable, the only thing that bothers me is the region settings. Anyway, I think I'll give the UK Rom a go and if that works well I'll stick with it
Mister B said:
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
Click to expand...
Click to collapse
I checked the version and this is what it showed:
KAIS130
SPL-3.2.9.Hard
CPLD-8
Click to expand...
Click to collapse
TBH, I don't know what any of that means But do you think the version I have is ok, or do I need to upgrade this to some other version?
Mister B said:
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Click to expand...
Click to collapse
I've attached a screenshot of my memory screen. The bit that puzzles me is that the storage area apparently has a lot more storage but I do not have an option to install all my applications on that area or atleast the bulky ones. I don't think I need a lite one since I do have 112MB free in the storage area which is more than sufficient for all the apps I usually install. Can you advise how I can install apps to the storage area as well?
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Thanks for all your help, it has given me a lot of confidence in these matters. Something I probably wouldn't have attempted

Mister B said:
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
I agree 101% and it appears fewer resources are put into ironing out bugs in the WM 6.1 ROMs than the WM 6.0 ones. I replied to fmervin's post in the ROM forums along these lines.

If all is running OK I would stick with your current HardSPL.
When installing your applications choose the option of installing to "Device"
You could install all your apps into a ROM, this would be cooking a ROM & is a complex process.
I would suggest a backup via Sprite or SPB. I use SPB v2.0 build3065 & it works well for me, preference of backup software is a bit of a Marmite scenario, you either love it or hate it.

Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Click to expand...
Click to collapse
You can't do that, it is flash memory. It's not like you can partition the hard drive.
But this is the easiest way to get your Apps and settings back after a flash.
Try this Sashimi Auto installer by a former XDA member. It is a nice little program that installs all your apps after a flash
http://www.winmo-experts.com/viewtopic.php?f=7&t=4

Help Please
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance

vicky_crispy said:
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
Click to expand...
Click to collapse
I think you need to decide what it is that you want to accomplish. Unless you cook your own rom, there is no way to add apps to the rom ( so that they will remain after a hard reset) Your rom is wyour phone's base operating system, it contains your OS (WM 6.1 ) and can only be replaced after completely erasing and replacing all files from the previous rom.
If it is a new rom you want, pick a rom that interests you and follow these instructions verbatim .
http://forum.xda-developers.com/showthread.php?t=433835
Your phone will go to the bootloader screen ( three color) and it will disconnect from usb during the process, but be patient until the end. When it says it takes ten minutes, it takes ten minutes. Leave the room if you have to , to keep from getting impatient.
If you just want to keep your OEM WM 6.1 and keep it simple, but change the look of your phone try this,
http://www.htcwiki.com/page/Manila+2D+and+M2D+Themes
This will change the look and feel of your phone with uninstallable .cab files and will not affect the rom or brick your phone by accident.

Will Hard SPL permanently stay even after...ROM Flashing/Hard Reset?

Here are my questions:
1) Will Hard SPL permanently stay even after...ROM Flashing/Hard Reset?
(I prefer it to stay because I don't want to reinstall after every new custom ROM)
2) If I update to ITJE's awesome Touch-IT V5 ROM, can I go back to the R2A firmware simply using SEUS? (Meaning I don't have to backup my ROM to revert back)
Thank you for your time.

yes to number 1 not sure about number 2

poetryrocksalot said:
Here are my questions:
1) Will Hard SPL permanently stay even after...ROM Flashing/Hard Reset?
(I prefer it to stay because I don't want to reinstall after every new custom ROM)
2) If I update to ITJE's awesome Touch-IT V5 ROM, can I go back to the R2A firmware simply using SEUS? (Meaning I don't have to backup my ROM to revert back)
Thank you for your time.
Click to expand...
Click to collapse
YES to number 1
No to number 2 *****BUT NO NEED****
****You can simply download your rom image from PavelsX1 ROMS Thread and flash with this one just rename it to KOVSIMG.nbh and copy to root MicroSd******
Hope i helped you

So are you telling me that in order to use SEUS to update to firmware R3A once it comes out, I would need to reinstall SPL (the original SPL)?
So...if I reinstall Stock SPL (the original SPL for warranty reason), will I be able to use SEUS to update to official ROM R3A (while my X1a is using Touch-IT v5.04)?

poetryrocksalot said:
So are you telling me that in order to use SEUS to update to firmware R3A once it comes out, I would need to reinstall SPL (the original SPL)?
So...if I reinstall Stock SPL (the original SPL for warranty reason), will I be able to use SEUS to update to official ROM R3A (while my X1a is using Touch-IT v5.04)?
Click to expand...
Click to collapse
No, first you should go back to the Official ROM ie. R2A and then reinstall StockSPL in order to get the R3A via SEUS

poetryrocksalot said:
So are you telling me that in order to use SEUS to update to firmware R3A once it comes out, I would need to reinstall SPL (the original SPL)?
So...if I reinstall Stock SPL (the original SPL for warranty reason), will I be able to use SEUS to update to official ROM R3A (while my X1a is using Touch-IT v5.04)?
Click to expand...
Click to collapse
I'm loving touch it
the thread is currently closed but right now it's running so fast xperia and eveyrything I only dont know why for instance if I talk and my ear is touching the screen this notification tab always pops out or if I try to click on the battery status on the main page it always pops out do you get that too?

what a load if sillyness.
Yes SPL should stick. there's some instances where it may get overwritten by a stockspl I think, (if a released rom has a newer version) but it's pretty unlikely.
no you don't need to change the SPL to go back to using SEUS
It should allow you to flash the latest straight away, I've done it a few times. However if you want a specific locale or language version then it would be a good idea to flash the correct rom from Pavels thread.

fards said:
what a load if sillyness.
Yes SPL should stick. there's some instances where it may get overwritten by a stockspl I think, (if a released rom has a newer version) but it's pretty unlikely.
no you don't need to change the SPL to go back to using SEUS
It should allow you to flash the latest straight away, I've done it a few times. However if you want a specific locale or language version then it would be a good idea to flash the correct rom from Pavels thread.
Click to expand...
Click to collapse
Thanks to make it clear..

fards said:
what a load if sillyness.
Yes SPL should stick. there's some instances where it may get overwritten by a stockspl I think, (if a released rom has a newer version) but it's pretty unlikely.
no you don't need to change the SPL to go back to using SEUS
It should allow you to flash the latest straight away, I've done it a few times. However if you want a specific locale or language version then it would be a good idea to flash the correct rom from Pavels thread.
Click to expand...
Click to collapse
Currently I'm using Touch-IT WM6.5 Beta 2.0, I've tried to get update via SEUS without get back to Official ROM or StockSPL, as you said, but it seems the SEUS didn't recognize my X1, my X1 just freez at the Bootloader screen & the SEUS just in the Identifying Process without any ending. And at the second time I tried it, the SEUS just freez at the "Follow the Instructions below" screen.
Are you sure with what you've done Fards?

im certain.
I've done it a couple of times now. some people seem to have issues with seus,even from stock rom.
have you got a different computer you could try it on?
have you tried putting the x1 in bootloader mode first to see if it makes a difference?
reading the 6.5 thread it seems some people are having issues with flashing other roms afterwards, so maybe that's connected, if so then try one of the released stock roms first ?

fards said:
im certain.
I've done it a couple of times now. some people seem to have issues with seus,even from stock rom.
have you got a different computer you could try it on?
have you tried putting the x1 in bootloader mode first to see if it makes a difference?
reading the 6.5 thread it seems some people are having issues with flashing other roms afterwards, so maybe that's connected, if so then try one of the released stock roms first ?
Click to expand...
Click to collapse
I haven't tried with another computer Fards, I was using my laptop which ever successfull upgrade my X1 from R1A to R2A using SEUS and even just for check for updates without any errors (I've done it a couple times when using official ROM). I'll give a try with another one if I've time, but I'm not sure it's my computer issue.
Certainly I'm always putting the X1 in bootloader fisrt before connect it to PC and continue the SEUS process.
Have you ever tried this WM6.5 ROM to get update using SEUS successfully?
Thanks for ur time Fards..

williyung said:
I haven't tried with another computer Fards, I was using my laptop which ever successfull upgrade my X1 from R1A to R2A using SEUS and even just for check for updates without any errors (I've done it a couple times when using official ROM). I'll give a try with another one if I've time, but I'm not sure it's my computer issue.
Certainly I'm always putting the X1 in bootloader fisrt before connect it to PC and continue the SEUS process.
Have you ever tried this WM6.5 ROM to get update using SEUS successfully?
Thanks for ur time Fards..
Click to expand...
Click to collapse
is the WM 6.5 ROM an official ROM? or is it custom/leaked ROM?

poetryrocksalot said:
is the WM 6.5 ROM an official ROM? or is it custom/leaked ROM?
Click to expand...
Click to collapse
Assuming it's itje's wm6.5 rom with Hard SPL from Olinex, will it work ?

poetryrocksalot said:
is the WM 6.5 ROM an official ROM? or is it custom/leaked ROM?
Click to expand...
Click to collapse
It's Itje Custom ROM based on WM6.5 beta

I can confirm now, it's not my computer issue, I've tested it with another computer and had the same issue.
Tested with get back to Stock ROM, and the SEUS works!

ROM TIPS!

Hey, I just bought my HTC HD Norwegian model! I wonder what ROM you recommend! I would love to have TF3D 2 keyboard/dialers/calander etc etc, which on Diamond II! but my phone is Norwegian, can i have a unoffical Rom on my phone? what can i do?
My current rom is; RUU_BlackStone_HTC_NOR_1.56.409.0_Radio_52.62.25.3 4_1.13.25.24_Ship
I tryed duttys new ROM HD v2.7 XTREME, its not updating my phone, standing on 0% done in a looong time, so i had to go back in recover modus :S
Whaaaaat 2 do

losty-1H said:
Hey, I just bought my HTC HD Norwegian model! I wonder what ROM you recommend! I would love to have TF3D 2 keyboard/dialers/calander etc etc, which on Diamond II! but my phone is Norwegian, can i have a unoffical Rom on my phone? what can i do?
My current rom is; RUU_BlackStone_HTC_NOR_1.56.409.0_Radio_52.62.25.3 4_1.13.25.24_Ship
I tryed duttys new ROM HD v2.7 XTREME, its not updating my phone, standing on 0% done in a looong time, so i had to go back in recover modus :S
Whaaaaat 2 do
Click to expand...
Click to collapse
You have to READ and understand first before jumping into Flashing ROMs. Out of all the ROMs out there... Flashing Dutty's 2.7 is the most confusing, especially if you are new to ROM Flashing.
First of all, you would have to flash HSPL (Hard SPL) or USPL (Universal SPL) on your device to flash Cooked or Custom ROMs. Do a bit of reading on these 2 topics on the forum.
Learn about Bootloader mode.
Then go through the ROMs that are posted on the forum. Go through their change log, features, tweaks and programs that come with the ROM. Usually most of the Chefs post Change Logs and Screen shots of their ROMs. Go through the last few pages of the thread to know about any issues and solutions.
Then decide on the ROM you are interested in and go ahead with flashing your deivce.
Now, regarding the current state of your deivce... I am not really sure what exactly you did.
Try Removing the battery and put it back.
While holding down the Volume Down button, press the Power button. Your phone will enter the Bootloader mode (Tri color screen, rather 4 clolored sceen with White at the end).
Download one of the Stock ROMs they are also called Ship ROMs. Please do not download ROMs with version number 1.56.XXX. They are the latest ROMs and since I am not sure what state your device is in, I would recommend you to download a 1.14.XX version Stock ROM.
Then connect your device while in Bootloader mode and run the Stock ROM. You would get your device back to the original state that you bought it.

Thanks
Well i flashed my phone to Duttys new rom, but i screen is f*** up my colors is so mesed up, i updated hardSP aswell

losty-1H said:
Well i flashed my phone to Duttys new rom, but i screen is f*** up my colors is so mesed up, i updated hardSP aswell
Click to expand...
Click to collapse
Read the instructions properly. Here's the simplified version:
1. Flash a stock rom (e.g. 1.14.xxx) with 1.14 SPL. They also include the stock radio.
2. Flash stock SPL 1.14
3. Flash a 1.56.xxx stock rom (with 1.54 SPL). It also includes a new stock radio.
4. Run USPL 2.5(!).
5. Run the included RUUWrapper and install dutty's rom

kieboy
3. Flash a 1.56.xxx stock rom (with 1.54 SPL). It also includes a new stock radio.
do you have a link for that?

sorry
I found it myself, but thanks for the help

New Official ROM Upgrade- Release Date: 2009-04-14

I've tried to download the ROM, but HTC tell me this "Sorry, this software download is not suitable for your device".
Maybe my device s/n number is not correct.
Maybe someone who has the correct s/n could download this ROM~
Just tell you guys the news~
http://www.htc.com/europe/SupportDownload.aspx?p_id=174&cat=2&dl_id=537
Caxio's and frednd's DownLoad Link--(I wanna say THANK YOU VERY MUCH!)
See page3 #21 & #23

Filename is :
HTC Touch 3G_MR2009_RUU_Jade_HTC_Europe_2.32.401.2_Radio_Sign_12.41.30.16_0.41.30.12_Ship
edit:
on booting the last red line (after radio and protocol) now says :
D 2.32.44800
Date (which shows after first boot) after screen calibration is now set to 25/03/09
(in settings / about) Build : 5.2.20771 (20771.1.4.6)
(in settings / device info) : rom version 2.32.401.2(44800)
ON customization after first boot if scaned for wifi networks and poped up a message about available networks

Ht845kh14923 :d

o2p63 said:
Ht845kh14923 :d
Click to expand...
Click to collapse
This is for italian version.

Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??

Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??

It seems HardSPL 1.40oli and this 2.32 rom don't work very well.Very sluggish and phone can't turn ON even after 2 Hard resets.
What is your experience???

Do not install if hard spl
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!

Could anyone check, if the gps-support has been improved?
km

lexx2009 said:
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Click to expand...
Click to collapse
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
update : Jade is fine now. New SPL is 2.32.0000 . More testing to be done.
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?

lagoskon said:
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
Click to expand...
Click to collapse
How did you go back to Stock SPL 1.40 ?? Where can i find this ??

Myster said:
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Click to expand...
Click to collapse
This is on the Hard-SPL page along with the Oli version
http://forum.xda-developers.com/attachment.php?attachmentid=166262&d=1236988725

GPS seems to work fine now, also the scroll behavior of opera is better
km

It is annoying that hardspl doesnt work with this upgrade of jade.. can't built a rom now with the new oem. It's all newer than the iolite versions, but still doesnt include Footprint

Any changes in Manila? New tabs? Calendar? Stocks? Changes in the contacts?

Hi
What is the Radio version in this new ROM?
I have just applied the version from here and if this contains the old Radio then I can hold off for now until hopefully a compliant Hard-SPL is made, I can live without Opera being perfect.

Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please

nereus114 said:
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
Click to expand...
Click to collapse
Install a different rom from this forum-> Shut down your jade, unplug it. Hold down "volume down button" and ""power on button" to get in to boot mode. now start to flash another rom.
when finished you can install stock spl and then install this new rom

Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel

jarel said:
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
Click to expand...
Click to collapse
that's right.. but i think it's in one of the drivers. using the old drivers and the new oem/sys makes it possible to run it with the current hardspl.
radio in this rom 0.41.30.12
no changes in manilla tabs, don't know what changed but it's newer

Alright i give up!

Before i put back the original spl and my ROM that i got with the phone i thought i should ask if anyone have an idea of what has gone wrong with my phone.
Right now i have HSPL on my phone, i think the name is 1.56 olinex, my radio is 1.14 and my ROM is kwbr topix 3.5 WM 6.1
Over the last months i have tried at leas 20 different cooked ROMS but the always end up with some kind of problem that i did not have before. The phone hangs, the wifi dont work, i can have a ROM on for a week without a problem, sometimes just an hour.I have read every thread there is about it, but i dont find any solution. I do perform task 29 prior to flashing, i have flashed back my original ROM, downloaded from HTC and tried to install a cooked ROM after that, but it doesnt help, the problems are the same.
I can mention that i dont have those problem when i have my orignal ROM on( the one that i have downloaded from HTC).
I would be very glad if anybody could help me cause i dont want my stock ROM back, its so boring.
Thank you for listening.
Forca

did you perfom 2 hard resets after flashing?

Flash a stock rom and see if that helps..

alchopop said:
great, so whats the actual problem?
Click to expand...
Click to collapse
The biggest problem, in my opinion is that the phone hangs, (turns off itself) and the wifi dont work. But maybe its just something that happens to everybody that is not using the stock ROM or am i wrong there.
Forca

alchopop said:
did you perfom 2 hard resets after flashing?
Click to expand...
Click to collapse
Yes, sometimes 3

mwaldi3 said:
Flash a stock rom and see if that helps..
Click to expand...
Click to collapse
Just to make things clear here, when everybody it talking about that it could help flashing a stock rom before you flash a custom rom, do you then mean install the rom that you download from HTC, or a stock rom that you can find in the forums here. The thing is with the stock rom from HTC you dont have to put the phone in its bootloader to flash. If the answer is that i should flash a stock rom that i can find here in the wiki, what rom should i use then, there are like 30 different ones.
Forca

Here is an other question about stock ROMS. Does anybody know if there is a stock ROM with color icons and the my location function? Do i have to have HSPL or USPL on my phone to but a stock rom on it, or does it work with the original SPL.
Forca

I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom

Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca

Forcavitale said:
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Click to expand...
Click to collapse
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance

Fallen Spartan said:
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Click to expand...
Click to collapse
Thank you for helping a noob out here One more noobish question, how do i know if the rilphone and the radio match?Right now i have the radio 1.14 and i found this cab http://forum.xda-developers.com/showthread.php?t=610927, i am not sure if the match, but if the dont what do i look for when i want to download the rilphone file?

Hi. Seems like the only thing you haven't tried is the reapply the HSPL. I've heard that it can sometimes get screwed up and this may account for the problems you're having. Obviously applying the HSPL is risky because if it goes wrong you have yourself an expensive waper weight. Good luck.

Just to get it right, when i flash a stock ROM do i have to wait until its completely installed(i mean booting up installing windows, setting time and date), until i flash my custom ROM or can i just pull out the battery when the smart mobility shows up
Forca

Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....

Bodisson said:
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Click to expand...
Click to collapse
So in other words it could work to flash my old original rom with the original radio on, undo my HSPL to the original SPL, then get USPL on the phone and flash Topix 3,5?
Forca

Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
Alright i did what you recommended last night; flashed swedish stock ROM with radio 1.13, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca

Forcavitale said:
Alright i did what you recommended last night; flashed swedish stock ROM, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Click to expand...
Click to collapse
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps

alchopop said:
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
Click to expand...
Click to collapse
Exactly what i have noticed too, Flashed a ROM a few days ago, wifi dont work, i dont do anything but turning the phone off and on again and i works.
Am i using the right rilphone for my radio 1.13? i used this one http://forum.xda-developers.com/showthread.php?t=610927 i use the rilphone my location cab in this post.

Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.

Bodisson said:
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Click to expand...
Click to collapse
In fact the only reason i have radio1.13 on is cause it came along with my stock rom