Database Develop

Stuck At 28%

I know there are others experiencing the 28% death wall while trying to flash WM6, but there doent seem to be any specific solutions to this.
I have a Dopod D810 and has already installed 1.30 olipro. Just trying to flash to the official WM6 ANZ Rom. No luck.
Any suggestions guys?
Should just be a very straight forward procedure. Flashing a Dopod with an official Rom.

should be, but it's not... mine is Dopod asia, and stuck at 28% when flashing. Not too sure, but really seemed to me that it was something related to hard-spl. After the 28% error, i reflashed an unofficial rom and tried the official again.
eventually it worked for me.
i guess you don't technically need to manually enter hard-spl first before flashing official ROM.. if anything went wrong i guess you could send it back to them..
safest is to use a modified RUU so it just flashes ROM without IPL + SPL.. i thiiiiiink problem is something to do with SPL

which unofficial rom did u reflash it to? I've been going back and forth with AX3L_OS v3.0.0.2 and the official ANZ dopod rom.
tried about 5 times now. still trying. each time it fails at 28% it's another 10 minutes to flash backto the unofficial rom.
maybe if i try to trce ur steps exactly it might work.

i was flashing to some pdaviet ROM, but i don't think that would make any difference from ax3l's...
have you tried flashing the official ROM with a modified RUU, or you really want the whole package...
If you're just trying to keep everything official i guess you could try to flash the official rom without manually entering bootloader and take your chances. Being that its an official ROM i guess it's safer, or at least covered in warranty..
One question, why don't you try to flash to official WM5 ROM, then to official WM6.. since technically it's supposed to work that way
seriously, i'm not sure why you'd want the official one though.. it's nothing special

Yeah I've tried flashing back to the official WM5 and then WM6, same story.
Tho I havent tried flashing the official WM6 through modified RUU, mainly coz i dont know how to.
Also, In the AX3L version of WM6, there doesnt seem to be a phonepad input method. only keyboard and block recongniser and one other one. Is that coz it's a modified rom, or does WM6 not have the phone pad input. if that's the case i can forget about flashing to WM6 all together.

can't remember if official wm6 has phonepad, but you can just install a cab for it, so it's not a big deal.
look on my site for a link to modified RUU official ROM... instructions are here

i had a lot of problems being stuck at 28%
what eventually i got it to flash to the aus rom was i used SPL 1.20 then it seemed to flash fine.
for some reason my phone doesnt like any other version of SPL besides the one on the latest aus rom either, i flashed to a cooked rom and couldnt flash back until i had put spl 1.20 back in then flashed back to the aus rom.

I have the same problem with 28% stucking
I try to reflash but I still have the same

do you have hard-spl? if so, which version? If you do, flash back a cooked ROM..
if not, you need to try to flash official ROM..
if neither is working, use splxploit. I think all links you need are in this thread already

I have a same problem.
I was upgraded from WM5 to Hong Kong Official WM6 chinese ROM, then I want to change to Official English ROM, I did the Hard-SPL 1.3 and get the SuperCID, but when upgrading the WM6 English officeial ROM, this was stuck at 28%.
Now I was able to flash back to WM5 rom, but I world like to Upgrade to WM6 official ROM, anyone help?

I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps

you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
HI, Thank for your reply, how can I do the modified RUU?

Hi all,
I have success to flash the WM6 official ROM.
this is my experience:
To flash the Radio ROM first, I has flash the 1.50.08.11 Radio ROM.
Then to download the Dutty NBH Tool to take off the Radio DOM of WM6 official ROM.
Then to flash the modify ROM.
Now, my phone is running WM6.

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
Learn something new everyday. Never knew that simply modifying the RUU would itself allow the updates. Just tried it, and yes it works also.

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
how do mofify the RUU? and what do I modify it to?
thanx walterjm

Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!
WildsideUK said:
I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps
Click to expand...
Click to collapse
Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!

I had the same problem and I resolve it by extract the rom and re-build it ... look at the thread http://forum.xda-developers.com/showthread.php?t=327667
Good luck

Strangre situation!

Hi all
I did hard SPL for my X1 then updated to Energy ROM regularly, then I did stock SPL before I go back to original ROM 6.1 , now the device won't SPL anymore and won't ROM update, it just get stuck in bootloader and shows (Loading....)
Please any suggestions
I'm very desperate
Regards,
MK

Help please !!!!!

You shouldn't have reverted to stock SPL before downgrading to stock rom. Try to load hard-SPL again.

I did but still no response, still stuck on bootloader and only (Loading...) appear

MAkS1 said:
You shouldn't have reverted to stock SPL before downgrading to stock rom. Try to load hard-SPL again.
Click to expand...
Click to collapse
So how is it done? Are you supposed to apply the stock SPL after you have updated with the original rom? I mean is good to know cuz i might roll back the phone one day.

xudo said:
So how is it done? Are you supposed to apply the stock SPL after you have updated with the original rom? I mean is good to know cuz i might roll back the phone one day.
Click to expand...
Click to collapse
Spl should ALWAYS be done LAST.

MK X1 said:
I did but still no response, still stuck on bootloader and only (Loading...) appear
Click to expand...
Click to collapse
Which hard spl are you using?

flash a r3 rom using mSD...should work fine

Make sure that you are either using the SD card to flash, or it is removed.
If agent's idea doesnt work, search for mtty.exe or drop me a PM. same thing happened to me and i was tripping balls

Help!My Blackstone fails to accept a WM6.5 rom, as it used to the past!

Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!

gerakas23 said:
Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!
Click to expand...
Click to collapse
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?

I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?

Fallen Spartan said:
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?
Click to expand...
Click to collapse
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!

xmsnx said:
I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?
Click to expand...
Click to collapse
Thanks for the response, read what I wrote in my response to the other friend!

I got similar issues before, the phone just couldn't boot or hard reset itself after one or two days with many different 6.5 ROMs. Did an mtty task 29 then it looks good now for a week. If it still failed I would follow Fallen Spartan's suggestion to flash stock ROM+SPL.

gerakas23 said:
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!
Click to expand...
Click to collapse
hmmm, after returning to stock rom & SPL. What was your SPL in bootloader? Did you follow dummies guide afterwards and use USPL or HSPL before trying to flash NRG rom? Did you try a different rom? Whats your current SPL?

Bad Flash?

Ok, here's what i did:
I'm sending my xperia back to vodafone, so i need to restore stock rom and spl. I flashed a NL Vodafone R3AA rom (found here) to my phone yesterday, which worked perfectly. Did a hard reset, and went on with restoring stock spl.I tried using the special RUU with a replaced stock spl .nbh (the method described in one of the topics here), but the RUU couldnt find my phone. Since i didnt have another PC here, i tried to flash the .nbh to my phone via the micro SD method.
This went well, the progress bar filled up and disappeared, followed by 10+ minutes of "loading". Advised by a friend, i pulled out the battery, put it back in the device and powered it on. The phone instantly booted, showing the bootloader-screen and saying it's going to resume flashing the device. Followed by another endless "loading" screen.
But, since i got a chance to look in the bootloader-screen, I saw the SPL version was now 0.72.000 (or something like that, at least the OliNex text was gone). Afaik, this means the stock spl is back. I tried replacing the stock spl Kovsimg.nbh with the default one provided with the custom RUU (which is OliNex HardSPL, right?), but it showed the same "loading" screen. I havent tried flashing the rom again, since the bootloader says it's on stock spl at the moment...
What can i do? I guess they dont accept bricks over at vodafone...
Thanks in Advance,
Sorbo

using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!

You also need to flash the radio back to stock (not sure what version it is, but it's around here somewhere) otherwise you'll face flash issues. This means flashing HardSPL flashing the radio, flashing StockSPL again and return. Also, best flash R2A. Not sure if R3A was ever properly released.

Ok guys, thanks for the replies
Jonny4911 said:
using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!
Click to expand...
Click to collapse
The phone is back on stock spl, is it possible to flash a rom? Or only stock roms? (Sorry for my dumb question, havent been into flashing for a few months now)
aethelbert said:
You also need to flash the radio back to stock (not sure what version it is, but it's around here somewhere) otherwise you'll face flash issues. This means flashing HardSPL flashing the radio, flashing StockSPL again and return. Also, best flash R2A. Not sure if R3A was ever properly released.
Click to expand...
Click to collapse
Ok, thanks for the tip R2AA it is!
When flashing the rom the radio was also updated, but i'll try this

R3AA was properly released!
if you want to be cure of complete stock why not just use SEUS?
and there is no need to flash radio with stock ROMs as they're included, all your doing is flashing a radio extracted from a stock rom anyway! this means you don't have to hardspl

Jonny4911 said:
using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!
Click to expand...
Click to collapse
And this was the winning tip. Just flashed back the R3AA rom (vfone NL), even though i doubted if it would work (since the bootloader said it was back on stock spl), but it did.
Phone works again. Bootloader now says 0.78.000 (or something like that, no OliNex), so i guess it's ok now. RUU still isnt able to flash the phone, tried on 3 different pc's ( win7 x64, vista x86, xp x86), but i cant flash the phone...
Ah well, i'll try to send it back, see what they come up with. Thanks a bunch!

X1 problem to hardSPL for newer SPL version 0.78.0000

X1 problem to hardSPL for newer SPL version 0.78.0000
Hi, I am ALi , sorry to bother, but just done some HardSPL on my X1,
last time the SPL ver was 0.78.0000
i read many of method to flash a newer ROM must HardSPL first their X1,
the problem is, I had already HardSPL it to SPL ver 0.72.0000, the process was a success
but
it stucked/bricked at tri-color mod, so i had it settled from
forum. xda-developers. com/showthread. php?t=455553 thread reported by MALIK,
i noticed that before down grading my X1, the ROM ver was UK_GEN_R3AA010,
but
after HardSPL to ver 0.72, i cant flash the original ROM UK_GEN_R3AA010 back, instead of that only ROM UK_GEN_R1AA017 are working with my current flashed SPL ver 0.72.
I tried to Hard SPL to 0.52 Olinex version (i didnt find any 0.72Olinex!! just 0.52 Olinex, where can i found the 0.72 ver of olinex?? does the 0.72Olinex really exist?? i am so much confiused now and really tired of trying to make it work in almost a week!!) so many time but fail, by USB, by SDcard (also try to replace my SD-HC4gb to Nokia SD 256Mb) neither of that method work!!
please help...
i am desprate to implement newer ROM on my X1 so called Kovsky....
please admin/engineers/developers help.... my head are getting bolder than b4 huhuhuuuuuu........
-ALi
Terengganu, Malaysia
p/s: i am uploading some of my pic shot while the problem persist right now to photobucket, but i am affraid that i didnt have any permission to attach th pic since i was a newbee....

The hardSPL 0.72Olinex can be found here (X1_HardSPL_v1.zip):
http://forum.xda-developers.com/showthread.php?t=431218
Also there is a detailed describtion on how to hardSPL your device:
http://forum.xda-developers.com/showthread.php?t=431218
For questions you can try the search button here, if you can't find any on this subject (which I doubt, because the question has been asked more than once in the thread) reply to the thread:
http://forum.xda-developers.com/showthread.php?t=431218
I've flashed my X1 with hardSPL and back to stock SPL a number of times, never without succes. From 0.720000 to 0.72Olinex to 0.720000 and from 0.780000 to 0.72Olinex.
So when you can't hardSPL from your pc there must be something wrong with the connection between pc and X1.
If you want a newer ROM with stock SPL, connect your phone with stock SPL 0.720000 to SEUS and SEUS will automatically update SPL to 0.780000. After that you can flash R3A ROM.
The other way through hardSPL and the manual download of R3A from PavelX1's sticky.

I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???

motok said:
I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???
Click to expand...
Click to collapse
Download you stock ROM from PavelX1's sticky thread and flash it...

Tnx you saved me from hours of searching

Hi Lokhato,....
thankx for the advice,... if ou wont tell me about the SEUS, sure my X1 i declared it DEAD!!! I was accidently HardSPL it to 0.72.0000 i think...., because of i tried so many times to HardSPL the OLinexSPL to my X1 but it aint workin. but then when i replace the RUU_signed.nbh that got version 0.72.0000stockSPL it worked AND THEN it STUCKED at the boot screen says that please wait, continue to upgrade ROM.... damn i resolved it...
so my step on recover to the latest stock SPL 0.78.00 are like this,...
1. download the SEUS from XPERIA website.
2. try to READ and FOLLOW the instruction stepbystep. even whenever the application ask you to restart the PC/LAPTOP, please make it done so....
3. whenever SEUS asked u to enter the bootscreen, MAKE SURE you take out the SD out from your phone. and let the SEUS flash the OriSPLver 0.78.0000
4. then it blinks several times after the progress bar finished, and it also stucked at bootscreen saying to continue updating ROM.
5. in this situation, please flash back your ROM with ROM UK_GEN_R3AA010 not the R1 or R2 ROM. so to manually flash the R3 ROM, copy the R3 image file to your freshed format SD and named it kovsimg.nbh
6. so put the SD in X1 and soft reset the X1 by pressing the reset button with your stylus at the back panel of X1.
7. let it load the image whenever it enter the boot screen again
8. press the power button to confirm upgrade ROM.
9. it should state there SUCCESS!! and you must HARD-RESET the X1.
9. waitt...... and wait...... be very patient, take a break... let it run.....
10. you are DONE!!
enjoy your original flashed ROM,...
if you not like it,
from this point you can just simply HardSPL it to 0.72Olinex by downloading the X1_HardSPL_v1.zip
then go get another ROM and repeat step 5.
as my observation...
SPL 0.72.0000 can flash img from R1,
R2 I dunno can flash or not, never try it...
SPL 0.78.0000 can flash img from R3
HardSPL it to OLinex ver 0.72OLinex ver, then you r good to go to flash any ROM you like!!
damn what a hard week!!! at last i got it to flash the HardSPL on my X1
last but not least.... just want you all to know that i was doing those step above from my mom's laptop current spec was CentrinoDuo, mine that always hanging whenever try to flash any SPL was on SempronAMD Laptop + always BlueScreen error even after i freshed repair my .NetFramework ver3.5sp1. so if you facing any problem on SPL our X1, try to done the upgrading on another PC/laptop, i believe that Intel based processor was more stable than AMD i think...

Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?

Lokatho said:
Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
but
- last time my original 0.78.0000 cant do HardSPL
- after accidently flash the 0.72.0000 by using RUU but at the same time i copy the stock0.72 SPL to RUU folder,,,... or my mistaken to copy to SD also by renaming it to kovsimg.nbh i think, just cant remember at that time, and still cant HardSPL + hangging somemore....
- after SEUS updates to newer stock SPL 0.78.0000 like before it was very easy to HardSPL with 0.72OLinex..... wonder y.....
hmmm... CustomRUU??... i think if i try that method would always get the ERROR code rather then success huhuhuuu....
for now i just stick to flashing ROM using Nokia SD 256Mb if the img can fit it in....
thank you so much anyway bro...
u da man!!!!

Lokatho said:
Don't know if you can use the SD-card flash
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi

Several roms do have panel manager installed so there is a use for the X Button
in case it is not cooked in you can add it manually. Also XMapper is available for alternative uses of the button...
Finally, if Silent_UC is supported by the rom you can bulk install many apps, registry edits, etc. after flashing the rom or afterwards. Just search...

putrabiru said:
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi
Click to expand...
Click to collapse
hardSPL can be done without a problem from 0.780000. I did it several times after I brought it to repairs.
In post #5 in the EnergyROM thread you can find a link on how to install the panelmanager, from R3A and X2. This works with all roms which don't have the panelmanager installed.

Mod. edit: not dev related, moved to general

I am very happy now! Just managed to update my SE X1 after SEUS 0.78!. As others suggested downloaded R3AA010 (APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010), but used NBHUtil to extract ROM. That was a mistake! I simply renamed R3AA010 to Kovsimg and put it in my SD 2 Gb card. Ufff, after 2 weeks of endless reading the forums and thying this and that... Finally!!!!