Database Develop

Reverting back to HTC ROM and SPL for warranty return?

At the point I am I need the help of experienced Users from the community.
I flashed a original HTC Wings (S730) with WM 6.1 ROM. It runs perfectly until I got a hardware problem (radio) . This is the reason I have to send it back to the official service.
Therefore I tried to go back to an official ROM from the http://wiki.xda-developers.com/index.php?pagename=WINGS_WM61_Alcaline
At first I flashed the earlier backuped Bootloder via sspl-0.91-wings.exe. This seems to be okay. But as I tried to flash an official ROM from the site mentioned above, during the flashing process I've got the note 'ERROR 294 Invalid vendor ID'. What was wrong? Did I forget any step?
Please, is there anyone who can describe the correct way back to 'warranty' for a newbie?
Thanx a lot.

have you tried all the ROM's? there is one prerelease and two release ROM's.. try both of the release roms, they might be for different production models/locations.

I tried both official released ROM's (signed as 'Ship'), not the prerelease version.

and if you first flash the shiped rom (with hardspl) and when done flash the back-up of the spl

With reference to an earlier statement of bigflavour in the thread http://forum.xda-developers.com/showthread.php?t=383617&page=17
I flashed back the original SPL at first.

Too bad It seems to be that I have a new problem now. Few minutes ago I have tried to reinstall hardSPL on the device via the well known sspl-0.91-wings.exe running on the Wings. But as I started the sspl, the device shows on the display that 'Access denied....is not digitally signed with a trusted certificate'.
Thereupon I thought I had to 'application_unlock' the device. After running the SDA_App...Unlock on my PC the display message shows succesful unlocking process. B U T, the sspl doesn't run as before.
Now, I'm totally confused. What has happened??

It's flavor, and unfortunately, I have no idea how to help you.

Probably tried the European english's spelling hehe.
Also This does seem like an odd problem, have you tried for kicks doing the factory reset to see if it will reset some of the registry and maybe fix your issues? I dont know anything about the spl's since I have no need to upgrade to 6.1, I wouldnt imagine it causing any more damage but again I dont know what all was done. I havnt followed those threads for a long time.

Thanx a lot. Apparently, the hint to make a hard reset hits the mark. Now I flashed back the HardSPL. So I'm back at the starting line . Does anyone knows if the official ROM from the http://wiki.xda-developers.com/index..._WM61_Alcaline is the latest one and can I use it for the warranty return?
Or should I look for an original German HTC ROM?

I was a little bit to fast. I will need a German ROM definitely, because the ROM from the Wiki doesn't include a the german language option.
Is there anyone who can help me with a original HTC S730 ROM for the german market?
Thank you in advance.

Hallo HSN,
if you give me a introduction how I backup my ROM, you can have my one. I own a German HTC S730. But I am confused when I read all threads about flashing etc....
One page introduction how to back up and you can have my one.
But I think that the Repair center here in Germany, doesn't care about the Rom you have installed.

Did i brick it ?

OK i think i ****ed up bigtime.
I was on HSPL, and at first i flashed a stock rom.
After that i flashed DUtty's rom and it went ok.
It booted up with green screen problem and loads of locks and really really slow. After that i tried to use uspl but i was getting connection problems. After that i thought i should go to 1.15 stock spl and so i flashed that one, in order to use uspl. But the problems still persist, and now i cant revert back to a previous cooked rom.
Any suggestions ?

Use Manually Bootloader
Go back to stock spl, first flash stock rom, use sspl manual turn olinex and flash stock spl and then u can hspl again.
Hope it solves the prob. Just take a look at my Grafik Problem thread!
By

Well i fixed it and flashed everything ok.
A message to all flashers, DO NOT TRY TO FLASH ON WINDOWS 7. You may brick your device.

sedde said:
Well i fixed it and flashed everything ok.
A message to all flashers, DO NOT TRY TO FLASH ON WINDOWS 7. You may brick your device.
Click to expand...
Click to collapse
Hi,
Why, Windows 7 has the same drivers like Vista???
Can You express more crearly?

i flashed on Win 7 (build 7077)... i had to roll back the HTC USB Sync driver as explained in many threads about flashing the latest HD ROM v 1.56. i think some of our fellow members are not following all the steps to flash with the new ROM/SPL.

sedde said:
A message to all flashers, DO NOT TRY TO FLASH ON WINDOWS 7. You may brick your device.
Click to expand...
Click to collapse
A message to all flashers:
Read the instructions thorougly. If you cannot say that you understand 100 % of what the instructions tells you, read them again or do some research.
After following these steps you will almost certainly have a much better experience with custom ROMs.
-KJ

i tried reverting the drivers but it is simply not working. i am thorough and i do read the details.

I had no problems with the drivers. I just followed the correct procedures mentioned in the wiki and post#6 of Duttys v2.8 rom
Have you tried rebooting pc afterwards and pressing F8 as per the instructions to help load them?

i flash on windows 7 7068 almost 10+ times already with no issue , using custom ruu.

simranjits said:
i flash on windows 7 7068 almost 10+ times already with no issue , using custom ruu.
Click to expand...
Click to collapse
Same here. Use Windows 7 (7068) as my only OS and I've been flashing 20+ roms without any problems.

fjevel said:
A message to all flashers:
Read the instructions thorougly. If you cannot say that you understand 100 % of what the instructions tells you, read them again or do some research.
After following these steps you will almost certainly have a much better experience with custom ROMs.
-KJ
Click to expand...
Click to collapse
The instructions for all the different flashing methods are a big mess if you ask me.
There is no red thread, they all just blend together in a big mess and leave out answeres to simple questions that would clearify stuff for newbies.
The more i read the long pages of instructions the more confused i get.

nizzon said:
The instructions for all the different flashing methods are a big mess if you ask me.
There is no red thread, they all just blend together in a big mess and leave out answeres to simple questions that would clearify stuff for newbies.
The more i read the long pages of instructions the more confused i get.
Click to expand...
Click to collapse
I agree, they can be confusing, but once you have mastered it, you'll wonder what the problem was!
What exactly are you confused with? What steps have you taken? Where are you now in the process?

Don't worry about the phone it will be ok.
The steps are as follow:
1). Flash hardspl
2). Flash a stockrom
3). Flash USPL 2.5
4). With USPL on your phone flash to Dutty
To revert back to previous roms:
1). Flash hardspl
2). Flash your previous rom.
Grtz,
Leo
sedde said:
OK i think i ****ed up bigtime.
I was on HSPL, and at first i flashed a stock rom.
After that i flashed DUtty's rom and it went ok.
It booted up with green screen problem and loads of locks and really really slow. After that i tried to use uspl but i was getting connection problems. After that i thought i should go to 1.15 stock spl and so i flashed that one, in order to use uspl. But the problems still persist, and now i cant revert back to a previous cooked rom.
Any suggestions ?
Click to expand...
Click to collapse

Fallen Spartan said:
I agree, they can be confusing, but once you have mastered it, you'll wonder what the problem was!
What exactly are you confused with? What steps have you taken? Where are you now in the process?
Click to expand...
Click to collapse
Im fine, thanx, I have flashed my phone twice without big problems.
But the second time I got really confused when i tried to really understand it and followed the instructions step by step, it just sent me in a loop between all the different pages.
A simple question and a simple answere in the ROM-thread solved my confusion then, and now I just ignore the ramblings in the instruction pages.

Laurentius26 said:
The steps are as follow:
1). Flash hardspl
2). Flash a stockrom
...
Click to expand...
Click to collapse
I have a question about this. As my HD was replaced (warranty) I don't know which version I have (O2 or HTC). My first HD was a O2 branded with 1.14.207 ROM, the replaced one (from the same supplier) came with the 1.14.407 ROM which is the official German HTC ROM. I've just tried to download the newly released ROM by HTC, but the site states that the new ROM is not available for my device (but I could at least register the device). Could be that this is because it's an O2 device or probably because the new ROM wasn't yet released in German?
So is it really important to flash exactly the stock ROM (as the CID has to fit) or is it okay - like Laurentius said - to flash any stock ROM? Don't wanna brick my device when upgrading to 1.54/1.56...btw...why one has to go to a stock ROM when upgrading to 1.5x afterwards? Is there a difference when upgrading from 1.14 to 1.5x instead of 1.19 to 1.5x? I didn't get it yet...
Thanks in advance,
pal1m

pal1m said:
I have a question about this. As my HD was replaced (warranty) I don't know which version I have (O2 or HTC). My first HD was a O2 branded with 1.14.207 ROM, the replaced one (from the same supplier) came with the 1.14.407 ROM which is the official German HTC ROM. I've just tried to download the newly released ROM by HTC, but the site states that the new ROM is not available for my device (but I could at least register the device). Could be that this is because it's an O2 device or probably because the new ROM wasn't yet released in German?
So is it really important to flash exactly the stock ROM (as the CID has to fit) or is it okay - like Laurentius said - to flash any stock ROM? Don't wanna brick my device when upgrading to 1.54/1.56...btw...why one has to go to a stock ROM when upgrading to 1.5x afterwards? Is there a difference when upgrading from 1.14 to 1.5x instead of 1.19 to 1.5x? I didn't get it yet...
Thanks in advance,
pal1m
Click to expand...
Click to collapse
Any stock rom should do it as Laurentius said

A lot of confusion has come about from these newer cooked 1.56 roms so I wrote a guide. If you still have confusion please read the guide in my signature
Windows 7 is also most definitely not an issue. Several of us here are using it successfully.

Touch HD running slow, need advice

Hi everyone,
Used cooked roms for a while now, used to use them on my tytn as well.
I have been having such a bad time with my touch HD, i thought it was time to ask what's going on with you lot.
Basically, my touch HD has been running so slow for a while now, that it can even be hit and miss if i answer a incoming call. It even takes 2/3 rings before the ringtone starts up!
I have used miri's wm6.5 v16, but recently updated to he's manilla 2.5 ROM to see if that improved things, it hasn't.
I have radio 1.14 installed along with 1.56oli.
Could i be doing something wrong or is there software out there i have installed that is restricting my touch hd?
Battery life aint too bad so i can't really see it being that.
Any help would be great, my phone is angering me! haha
many thanks for any help!
stuart

stuartturrell said:
Hi everyone,
Used cooked roms for a while now, used to use them on my tytn as well.
I have been having such a bad time with my touch HD, i thought it was time to ask what's going on with you lot.
Basically, my touch HD has been running so slow for a while now, that it can even be hit and miss if i answer a incoming call. It even takes 2/3 rings before the ringtone starts up!
I have used miri's wm6.5 v16, but recently updated to he's manilla 2.5 ROM to see if that improved things, it hasn't.
I have radio 1.14 installed along with 1.56oli.
Could i be doing something wrong or is there software out there i have installed that is restricting my touch hd?
Battery life aint too bad so i can't really see it being that.
Any help would be great, my phone is angering me! haha
many thanks for any help!
stuart
Click to expand...
Click to collapse
have you tried flashing back to stock http://forum.xda-developers.com/showthread.php?t=501583&highlight=RUU+blackstone rom?

no, ok, i will take a look at doing that then.
Will i have any issues other than the one stated about hardspl with going back to stock?
If i were to install this, would i then be able to try cooked ROM's again or would i likely see the same as what is happening now? (slow device)
Thanks for the link btw

stuartturrell said:
no, ok, i will take a look at doing that then.
Will i have any issues other than the one stated about hardspl with going back to stock?
If i were to install this, would i then be able to try cooked ROM's again or would i likely see the same as what is happening now? (slow device)
Thanks for the link btw
Click to expand...
Click to collapse
i am well experience with USPL but nil with HSPL, i have been flashing back and forth stock and any latest Manila 2.5xxxx ROMs using USPL. you can search HSPL thread and look for ways in order for you to flash stock rom and reflash cooked roms.

It sounds like you've correct SPL for rom your using, i.e. SPL 1.56.Olinex, so it shouldn't be a problem with HSPL. You've also tried a different rom which also didn't fix your issue so I'd suggest what jigners said above and restore stock SPL & rom, then re-use dummies guide before flashing cooked rom again.
Alternatively check on Miri thread incase there are issues with his latest rom(s)? If so, there are plenty of other chef's and alternative cooked roms to try before you try restoring stock

maybe you want to try kwbr's Topix rom, it's wm6.1 and fast

I would say go back to stock ROM and start all over again.
Good combo is:
SPL 1.56
EnergyROM
Latest radio is a bit disappointing for me so i am on 1.14.25.24 with its rilphone.dll
Remember to flash with no memory card inside and to do a hard reset after the flash

By the way, have you hard reseted your device after flashing a new rom?
If not then do the hard reset for 2/3 times and observe the performance.
Furthermore, remove the SD card from the device and check the same. Defective SD card simulates the same problem because system requires lot more time to access it.

OK, i have gone back to stock firmware (well most recent offical release anyway)
All seems ok at the moment, it's been up and running for a couple days smoothly now.
I will take a look at the dummies guide and get back to cooked soon.
And yes, i do a hard reset everytime i have flashed, but only, i will try that next time i put cooked ware on the phone. (hopefully later today).
thanks for all the help,

Potentially Broken T.HD - Need help!

Hi All,
I have used the search function - but ended up getting confused.
I have a Touch HD that I bought in January of this year (2009) from Mobiles.co.uk (Carphone Warehouse) and is on the O2 network (UK).
I have been using Dutty's ROMs (both 6.1 and 6.5) for months now - and have always used USPL when flashing, using the SD card method.
Over the past 3 days, my HD has been playing up.
When it started, I was using Dutty's R7. The radio was 1.14.something.something. The device was working perfectly, and I was really happy with the ROM and the way the phone was working. I had installed NO other applications with the exception of a different taskbar and obviously SDKCerts.cab
First of all, HTC Sense stopped working - it would cycle between "Loading HTC Sense" and "Tap here to launch HTC Sense"
Then, when rebooting the device, it just hung on the "Smart Mobility" screen. I left it in case it just needed a while to boot, but nothing.
I had no other option than to hard reset.
It worked OK for a few hours, but then HTC Sense started to crash again. So I flashed a new ROM - Lost in Asia or whatever it is called.
Same symptoms.
I flashed Dutty's R7 back and also the new 1.17 radio.
No joy.
The phone also hangs for ages on the Smart Mobility screen - perhaps a full minute where as before, it used to be no more than 15 seconds or so.
The following is displayed on the "Smart Mobility Screen"
1.17.25.09
52.69.25.37H
1.59.Dutty
The bootloader screen (before running USPL) shows the following:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) V6
So the question I'm asking - is... Is my phone suffering some kind of hardware malfunction, or is this a known and fixable fault that I somehow have caused?
If the phone looks like it is malfunctioning, how would I go about returning it to stock so that the CPWH repair centre do not know it's had an unofficial ROM installed?
I'd like to add that whilst I'm very PC literate, I'm no programmer and a lot of the stuff here is alien to me hence my confusion - I just know how to flash a new ROM etc.
Thanks to anyone that takes the time to help me - I'd be really thankful to anyone that helps me sort this - be it tell me how to fix the device, or tells me to take it back!
Thanks in advance & Regards,
Chris.

Will D/L and flash Dutty's R0 Holy Grail ROM and see if that makes a difference...

If you've been using uspl than it will still be the stock spl and thus you could try to load the stock rom from htc.com specially designed for the touch hd(blackstone). I've read and heard from a lot of people that after flashing several roms and even hard resetting afterwards, some bits and pieces stay behind and flashing an original stock rom will undo this. I don't think it's a radio issue. And another big thing if you use dutty R7 that's a 1.56+ rom so you should have the right uspl olinex software to load these roms, if you used older software then problems with colouring and other things will appear.

a1gp said:
If you've been using uspl than it will still be the stock spl and thus you could try to load the stock rom from htc.com specially designed for the touch hd(blackstone). I've read and heard from a lot of people that after flashing several roms and even hard resetting afterwards, some bits and pieces stay behind and flashing an original stock rom will undo this. I don't think it's a radio issue. And another big thing if you use dutty R7 that's a 1.56+ rom so you should have the right uspl olinex software to load these roms, if you used older software then problems with colouring and other things will appear.
Click to expand...
Click to collapse
Thanks for the quick reply.
So is it perhaps better to revert to the original ROM before flashing a cooked ROM? I always Hard Reset twice after flashing as understand this helps.
OK - so the 1.56+ situation - I was under the impression that using the latest USPL (2.5) when flashing was OK? I have never had the colour problem... but perhaps if I'm flashing wrong then these problems could be to do with this?
Thanks again...
Chris

The Sense Manila has known bug that you need to press home to load it (sometimes).
For you case, I would suggest you to clean up your SD Card.
there may be several file that cause your system to freeze.
So, format your SD, hard reset.. and cross fingers.

Yes, It is better to revert to the original rom once in a while before flashing a new rom, if u used the latest uspl and the colours are ok, then you've done that right and it will probably be bits and pieces of old flashed roms floating around on the device.
Best to revert to stock rom and hard reset twice.
Afterwards flash the rom u want. If everything works again. U could hspl instead of uspl, hspl is more stable if u ask me. And you can go back to stock spl if you have waranty issues. there's a tut on that to in the rom section.

mcdull said:
The Sense Manila has known bug that you need to press home to load it (sometimes).
For you case, I would suggest you to clean up your SD Card.
there may be several file that cause your system to freeze.
So, format your SD, hard reset.. and cross fingers.
Click to expand...
Click to collapse
I forgot to mention - that was one of the things I did. Previously, I had loads of email folders from all the ROM installs.
Now I have a folder containing the useful CAB files that I need, and the ROM image file. Thats it.
It's only a 1gb card as my 8gb card gave up the ghost.
Thanks for the suggestion though and my apologies for not mentioning this in the initial post.
From reading the Dummies guide, am I right in thinking that in order to use a 1.55+ ROM (such as Dutty's Holy Grail R0) I only need to run USPL and then flash (as opposed to flash a newer SPL) as my stock SPL is already 1.54?

a1gp said:
Yes, It is better to revert to the original rom once in a while before flashing a new rom, if u used the latest uspl and the colours are ok, then you've done that right and it will probably be bits and pieces of old flashed roms floating around on the device.
Best to revert to stock rom and hard reset twice.
Afterwards flash the rom u want. If everything works again. U could hspl instead of uspl, hspl is more stable if u ask me. And you can go back to stock spl if you have waranty issues. there's a tut on that to in the rom section.
Click to expand...
Click to collapse
Thanks for this - I didnt realise the device would retain bits and bobs, and you may well be right in that things are getting corrupted in there!
Which is the best stock ROM to flash - is there a link to one? I looked on the Wiki and there seem to be loads... which will work on a UK T8282?!
Thanks again!
Chris

constablechris said:
I forgot to mention - that was one of the things I did. Previously, I had loads of email folders from all the ROM installs.
Now I have a folder containing the useful CAB files that I need, and the ROM image file. Thats it.
It's only a 1gb card as my 8gb card gave up the ghost.
Thanks for the suggestion though and my apologies for not mentioning this in the initial post.
From reading the Dummies guide, am I right in thinking that in order to use a 1.55+ ROM (such as Dutty's Holy Grail R0) I only need to run USPL and then flash (as opposed to flash a newer SPL) as my stock SPL is already 1.54?
Click to expand...
Click to collapse
what do you mean hang for age?
1 minute is nothing if it turns out boot up.
There are chances that the nand flash needs to refresh and wasted some times. But it won't be forever.

constablechris said:
Thanks for this - I didnt realise the device would retain bits and bobs, and you may well be right in that things are getting corrupted in there!
Which is the best stock ROM to flash - is there a link to one? I looked on the Wiki and there seem to be loads... which will work on a UK T8282?!
Thanks again!
Chris
Click to expand...
Click to collapse
there's an original rom on htc.com for blackstone just use that one.
hope it will turn out right for you

I thought I'm the only one who had this problem. Last Sunday my blackstone started to freeze on the smart mobility screen too. I flash 3 different roms because I thought its an rom issue with no luck. On Monday it even managed to hardreset itself after I waited for about 15 min in the smart mobility screen.
After that I flashed a stock rom and it seem to be fine by now.
But now I will flash a custom again, the stock one is so 6.1

Alright i give up!

Before i put back the original spl and my ROM that i got with the phone i thought i should ask if anyone have an idea of what has gone wrong with my phone.
Right now i have HSPL on my phone, i think the name is 1.56 olinex, my radio is 1.14 and my ROM is kwbr topix 3.5 WM 6.1
Over the last months i have tried at leas 20 different cooked ROMS but the always end up with some kind of problem that i did not have before. The phone hangs, the wifi dont work, i can have a ROM on for a week without a problem, sometimes just an hour.I have read every thread there is about it, but i dont find any solution. I do perform task 29 prior to flashing, i have flashed back my original ROM, downloaded from HTC and tried to install a cooked ROM after that, but it doesnt help, the problems are the same.
I can mention that i dont have those problem when i have my orignal ROM on( the one that i have downloaded from HTC).
I would be very glad if anybody could help me cause i dont want my stock ROM back, its so boring.
Thank you for listening.
Forca

did you perfom 2 hard resets after flashing?

Flash a stock rom and see if that helps..

alchopop said:
great, so whats the actual problem?
Click to expand...
Click to collapse
The biggest problem, in my opinion is that the phone hangs, (turns off itself) and the wifi dont work. But maybe its just something that happens to everybody that is not using the stock ROM or am i wrong there.
Forca

alchopop said:
did you perfom 2 hard resets after flashing?
Click to expand...
Click to collapse
Yes, sometimes 3

mwaldi3 said:
Flash a stock rom and see if that helps..
Click to expand...
Click to collapse
Just to make things clear here, when everybody it talking about that it could help flashing a stock rom before you flash a custom rom, do you then mean install the rom that you download from HTC, or a stock rom that you can find in the forums here. The thing is with the stock rom from HTC you dont have to put the phone in its bootloader to flash. If the answer is that i should flash a stock rom that i can find here in the wiki, what rom should i use then, there are like 30 different ones.
Forca

Here is an other question about stock ROMS. Does anybody know if there is a stock ROM with color icons and the my location function? Do i have to have HSPL or USPL on my phone to but a stock rom on it, or does it work with the original SPL.
Forca

I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom

Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca

Forcavitale said:
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Click to expand...
Click to collapse
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance

Fallen Spartan said:
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Click to expand...
Click to collapse
Thank you for helping a noob out here One more noobish question, how do i know if the rilphone and the radio match?Right now i have the radio 1.14 and i found this cab http://forum.xda-developers.com/showthread.php?t=610927, i am not sure if the match, but if the dont what do i look for when i want to download the rilphone file?

Hi. Seems like the only thing you haven't tried is the reapply the HSPL. I've heard that it can sometimes get screwed up and this may account for the problems you're having. Obviously applying the HSPL is risky because if it goes wrong you have yourself an expensive waper weight. Good luck.

Just to get it right, when i flash a stock ROM do i have to wait until its completely installed(i mean booting up installing windows, setting time and date), until i flash my custom ROM or can i just pull out the battery when the smart mobility shows up
Forca

Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....

Bodisson said:
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Click to expand...
Click to collapse
So in other words it could work to flash my old original rom with the original radio on, undo my HSPL to the original SPL, then get USPL on the phone and flash Topix 3,5?
Forca

Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
Alright i did what you recommended last night; flashed swedish stock ROM with radio 1.13, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca

Forcavitale said:
Alright i did what you recommended last night; flashed swedish stock ROM, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Click to expand...
Click to collapse
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps

alchopop said:
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
Click to expand...
Click to collapse
Exactly what i have noticed too, Flashed a ROM a few days ago, wifi dont work, i dont do anything but turning the phone off and on again and i works.
Am i using the right rilphone for my radio 1.13? i used this one http://forum.xda-developers.com/showthread.php?t=610927 i use the rilphone my location cab in this post.

Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.

Bodisson said:
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Click to expand...
Click to collapse
In fact the only reason i have radio1.13 on is cause it came along with my stock rom