Hi everyone,
Used cooked roms for a while now, used to use them on my tytn as well.
I have been having such a bad time with my touch HD, i thought it was time to ask what's going on with you lot.
Basically, my touch HD has been running so slow for a while now, that it can even be hit and miss if i answer a incoming call. It even takes 2/3 rings before the ringtone starts up!
I have used miri's wm6.5 v16, but recently updated to he's manilla 2.5 ROM to see if that improved things, it hasn't.
I have radio 1.14 installed along with 1.56oli.
Could i be doing something wrong or is there software out there i have installed that is restricting my touch hd?
Battery life aint too bad so i can't really see it being that.
Any help would be great, my phone is angering me! haha
many thanks for any help!
stuart
stuartturrell said:
Hi everyone,
Used cooked roms for a while now, used to use them on my tytn as well.
I have been having such a bad time with my touch HD, i thought it was time to ask what's going on with you lot.
Basically, my touch HD has been running so slow for a while now, that it can even be hit and miss if i answer a incoming call. It even takes 2/3 rings before the ringtone starts up!
I have used miri's wm6.5 v16, but recently updated to he's manilla 2.5 ROM to see if that improved things, it hasn't.
I have radio 1.14 installed along with 1.56oli.
Could i be doing something wrong or is there software out there i have installed that is restricting my touch hd?
Battery life aint too bad so i can't really see it being that.
Any help would be great, my phone is angering me! haha
many thanks for any help!
stuart
Click to expand...
Click to collapse
have you tried flashing back to stock http://forum.xda-developers.com/showthread.php?t=501583&highlight=RUU+blackstone rom?
no, ok, i will take a look at doing that then.
Will i have any issues other than the one stated about hardspl with going back to stock?
If i were to install this, would i then be able to try cooked ROM's again or would i likely see the same as what is happening now? (slow device)
Thanks for the link btw
stuartturrell said:
no, ok, i will take a look at doing that then.
Will i have any issues other than the one stated about hardspl with going back to stock?
If i were to install this, would i then be able to try cooked ROM's again or would i likely see the same as what is happening now? (slow device)
Thanks for the link btw
Click to expand...
Click to collapse
i am well experience with USPL but nil with HSPL, i have been flashing back and forth stock and any latest Manila 2.5xxxx ROMs using USPL. you can search HSPL thread and look for ways in order for you to flash stock rom and reflash cooked roms.
It sounds like you've correct SPL for rom your using, i.e. SPL 1.56.Olinex, so it shouldn't be a problem with HSPL. You've also tried a different rom which also didn't fix your issue so I'd suggest what jigners said above and restore stock SPL & rom, then re-use dummies guide before flashing cooked rom again.
Alternatively check on Miri thread incase there are issues with his latest rom(s)? If so, there are plenty of other chef's and alternative cooked roms to try before you try restoring stock
maybe you want to try kwbr's Topix rom, it's wm6.1 and fast
I would say go back to stock ROM and start all over again.
Good combo is:
SPL 1.56
EnergyROM
Latest radio is a bit disappointing for me so i am on 1.14.25.24 with its rilphone.dll
Remember to flash with no memory card inside and to do a hard reset after the flash
By the way, have you hard reseted your device after flashing a new rom?
If not then do the hard reset for 2/3 times and observe the performance.
Furthermore, remove the SD card from the device and check the same. Defective SD card simulates the same problem because system requires lot more time to access it.
OK, i have gone back to stock firmware (well most recent offical release anyway)
All seems ok at the moment, it's been up and running for a couple days smoothly now.
I will take a look at the dummies guide and get back to cooked soon.
And yes, i do a hard reset everytime i have flashed, but only, i will try that next time i put cooked ware on the phone. (hopefully later today).
thanks for all the help,
Related
Hey there, please don't kill me for asking this question. I have searched this forum, and googled my problems, and tried all the suggestions...none work.
I have an htc touch diamond with a wm 6.1, but have flashed MANY different roms in the past 2weeks, including wm6.5 roms. All roms have been downlaoded from XDA.
Hardspl: Olinex 1.30
Radio: Radio v1.00.25.23
My problems...
First my phone started becoming very unresponsive, taking ages to even go into the start menu. I assumed it was the rom that was causing the major slow down, and flashed another...same problem. Then thought okay, maybe its just wm6.5 thats not very stable yet...and flashed a winmo6.1 rom.
It works fine now, but everytime i soft reset it does a hard reset, reinstall's all the wm6.1 cab's, delete's my contacts, messages, email's etc...please, i don't know what to do. My whole life is organized on my phone...i can't keep losing data like this everytime i soft reset.
Thanks in advance...
And thanks for the amazing community and to all contributers!!! you are all doing an amazing job!!!
must have had a bad flash, theres a topic somewhere on how to solve the weird problem
ROM issue....
Try reflashing with an original stock ROM, then flash the ROM you want to use... this cures all sorts of wierd and wonderful issues
Yipee!!
Thank you all, flashing stock rom and then the cooked one worked like a charm. Thanx All!!!
stock ROM
Where did you get the stock ROM? I have a friend that needs a stock ROM that preceded the last ROM update HTC released. He states he has v 6.1 build 20764.1.4.3.
Stock rom
http://forum.xda-developers.com/showthread.php?t=394985
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
To add an update, the boot loader screen shows:
BLAC100 32M
SPL-1.56.OliNex
Micro-Blackstone (LED) v6
Thought this might help in finding out how much work to stock?
I Think u need the original rom... or a htc one from the website?? ... can it not be downloaded from the htc website?? i may be wrong
I do but also need to make sure I do an original spl and radio as well
first off go to htc.com and download the romupgrade thats on that side (ive non is on the side check the wiki for youre countryrom)
then flash that one and se ive radio comes with it
ive not flash radio 13.**.**.**
then from the hard spl thread there a tut how t make youre spl stock again and youre finished
This is the last official ROM with 1.56 spl and 1.13 radio
h..p://rapidshare.com/files/231263089/-HTC_Touch_HD-MR_2009-RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
J7ody said:
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
Click to expand...
Click to collapse
At boot it shows, just restart your device and look at the red text in the bottom right corner, there it will show your current radio version.
Could also see it in device info when the device is on but dunno if you still can considering you need to return it.
gl.
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Curious????
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I also have read a couple of these help requests and the same problem, but what could it be, is it the windows mobile 6.5 builds that are doing this (not blaming the chef's in anyway), or some conflict with the spl... have to investigate this more...
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Returning to Stock for repair! to having screen problems after changing the rom
J7ody said:
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
Click to expand...
Click to collapse
dataSaMm said:
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Click to expand...
Click to collapse
Hi, can someone (Admin) change the title of this thread from Returning to Stock for repair! to Having screen problems after changing the rom?
I think the first is solved and now we have this new problem in hand.
best regards
+1
i've had the problem with a cooked french rom (Pyrana V17C). My screen started to freeze for a few seconds. During that time, when I put the finger on the screen and slide, the screen follows the move but it comes back to where it first was, ant the move is finally not taken in consideration ... it looks like the screen is an elastic...
So it did it sometimes and it lasted a few seconds first, and then, a couple af days later, it was more often, and I had to soft reset everytime, and yesterday, I finally had to hard reset to take back the hand, and the bug came back more quickly. So I installed the latest release of this rom this morning and everything seems to be stable since a couple of hour. If it comes back I'll try another rom, but if someone can find a way to set this, that would be perfect ...
J7ody said:
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
Click to expand...
Click to collapse
You've found your solution to original query and returned device to stock rom & SPL. Thread has now run its purpose
Thread closed
Hi All,
I have used the search function - but ended up getting confused.
I have a Touch HD that I bought in January of this year (2009) from Mobiles.co.uk (Carphone Warehouse) and is on the O2 network (UK).
I have been using Dutty's ROMs (both 6.1 and 6.5) for months now - and have always used USPL when flashing, using the SD card method.
Over the past 3 days, my HD has been playing up.
When it started, I was using Dutty's R7. The radio was 1.14.something.something. The device was working perfectly, and I was really happy with the ROM and the way the phone was working. I had installed NO other applications with the exception of a different taskbar and obviously SDKCerts.cab
First of all, HTC Sense stopped working - it would cycle between "Loading HTC Sense" and "Tap here to launch HTC Sense"
Then, when rebooting the device, it just hung on the "Smart Mobility" screen. I left it in case it just needed a while to boot, but nothing.
I had no other option than to hard reset.
It worked OK for a few hours, but then HTC Sense started to crash again. So I flashed a new ROM - Lost in Asia or whatever it is called.
Same symptoms.
I flashed Dutty's R7 back and also the new 1.17 radio.
No joy.
The phone also hangs for ages on the Smart Mobility screen - perhaps a full minute where as before, it used to be no more than 15 seconds or so.
The following is displayed on the "Smart Mobility Screen"
1.17.25.09
52.69.25.37H
1.59.Dutty
The bootloader screen (before running USPL) shows the following:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) V6
So the question I'm asking - is... Is my phone suffering some kind of hardware malfunction, or is this a known and fixable fault that I somehow have caused?
If the phone looks like it is malfunctioning, how would I go about returning it to stock so that the CPWH repair centre do not know it's had an unofficial ROM installed?
I'd like to add that whilst I'm very PC literate, I'm no programmer and a lot of the stuff here is alien to me hence my confusion - I just know how to flash a new ROM etc.
Thanks to anyone that takes the time to help me - I'd be really thankful to anyone that helps me sort this - be it tell me how to fix the device, or tells me to take it back!
Thanks in advance & Regards,
Chris.
Will D/L and flash Dutty's R0 Holy Grail ROM and see if that makes a difference...
If you've been using uspl than it will still be the stock spl and thus you could try to load the stock rom from htc.com specially designed for the touch hd(blackstone). I've read and heard from a lot of people that after flashing several roms and even hard resetting afterwards, some bits and pieces stay behind and flashing an original stock rom will undo this. I don't think it's a radio issue. And another big thing if you use dutty R7 that's a 1.56+ rom so you should have the right uspl olinex software to load these roms, if you used older software then problems with colouring and other things will appear.
a1gp said:
If you've been using uspl than it will still be the stock spl and thus you could try to load the stock rom from htc.com specially designed for the touch hd(blackstone). I've read and heard from a lot of people that after flashing several roms and even hard resetting afterwards, some bits and pieces stay behind and flashing an original stock rom will undo this. I don't think it's a radio issue. And another big thing if you use dutty R7 that's a 1.56+ rom so you should have the right uspl olinex software to load these roms, if you used older software then problems with colouring and other things will appear.
Click to expand...
Click to collapse
Thanks for the quick reply.
So is it perhaps better to revert to the original ROM before flashing a cooked ROM? I always Hard Reset twice after flashing as understand this helps.
OK - so the 1.56+ situation - I was under the impression that using the latest USPL (2.5) when flashing was OK? I have never had the colour problem... but perhaps if I'm flashing wrong then these problems could be to do with this?
Thanks again...
Chris
The Sense Manila has known bug that you need to press home to load it (sometimes).
For you case, I would suggest you to clean up your SD Card.
there may be several file that cause your system to freeze.
So, format your SD, hard reset.. and cross fingers.
Yes, It is better to revert to the original rom once in a while before flashing a new rom, if u used the latest uspl and the colours are ok, then you've done that right and it will probably be bits and pieces of old flashed roms floating around on the device.
Best to revert to stock rom and hard reset twice.
Afterwards flash the rom u want. If everything works again. U could hspl instead of uspl, hspl is more stable if u ask me. And you can go back to stock spl if you have waranty issues. there's a tut on that to in the rom section.
mcdull said:
The Sense Manila has known bug that you need to press home to load it (sometimes).
For you case, I would suggest you to clean up your SD Card.
there may be several file that cause your system to freeze.
So, format your SD, hard reset.. and cross fingers.
Click to expand...
Click to collapse
I forgot to mention - that was one of the things I did. Previously, I had loads of email folders from all the ROM installs.
Now I have a folder containing the useful CAB files that I need, and the ROM image file. Thats it.
It's only a 1gb card as my 8gb card gave up the ghost.
Thanks for the suggestion though and my apologies for not mentioning this in the initial post.
From reading the Dummies guide, am I right in thinking that in order to use a 1.55+ ROM (such as Dutty's Holy Grail R0) I only need to run USPL and then flash (as opposed to flash a newer SPL) as my stock SPL is already 1.54?
a1gp said:
Yes, It is better to revert to the original rom once in a while before flashing a new rom, if u used the latest uspl and the colours are ok, then you've done that right and it will probably be bits and pieces of old flashed roms floating around on the device.
Best to revert to stock rom and hard reset twice.
Afterwards flash the rom u want. If everything works again. U could hspl instead of uspl, hspl is more stable if u ask me. And you can go back to stock spl if you have waranty issues. there's a tut on that to in the rom section.
Click to expand...
Click to collapse
Thanks for this - I didnt realise the device would retain bits and bobs, and you may well be right in that things are getting corrupted in there!
Which is the best stock ROM to flash - is there a link to one? I looked on the Wiki and there seem to be loads... which will work on a UK T8282?!
Thanks again!
Chris
constablechris said:
I forgot to mention - that was one of the things I did. Previously, I had loads of email folders from all the ROM installs.
Now I have a folder containing the useful CAB files that I need, and the ROM image file. Thats it.
It's only a 1gb card as my 8gb card gave up the ghost.
Thanks for the suggestion though and my apologies for not mentioning this in the initial post.
From reading the Dummies guide, am I right in thinking that in order to use a 1.55+ ROM (such as Dutty's Holy Grail R0) I only need to run USPL and then flash (as opposed to flash a newer SPL) as my stock SPL is already 1.54?
Click to expand...
Click to collapse
what do you mean hang for age?
1 minute is nothing if it turns out boot up.
There are chances that the nand flash needs to refresh and wasted some times. But it won't be forever.
constablechris said:
Thanks for this - I didnt realise the device would retain bits and bobs, and you may well be right in that things are getting corrupted in there!
Which is the best stock ROM to flash - is there a link to one? I looked on the Wiki and there seem to be loads... which will work on a UK T8282?!
Thanks again!
Chris
Click to expand...
Click to collapse
there's an original rom on htc.com for blackstone just use that one.
hope it will turn out right for you
I thought I'm the only one who had this problem. Last Sunday my blackstone started to freeze on the smart mobility screen too. I flash 3 different roms because I thought its an rom issue with no luck. On Monday it even managed to hardreset itself after I waited for about 15 min in the smart mobility screen.
After that I flashed a stock rom and it seem to be fine by now.
But now I will flash a custom again, the stock one is so 6.1
Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!
gerakas23 said:
Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!
Click to expand...
Click to collapse
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?
I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?
Fallen Spartan said:
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?
Click to expand...
Click to collapse
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!
xmsnx said:
I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?
Click to expand...
Click to collapse
Thanks for the response, read what I wrote in my response to the other friend!
I got similar issues before, the phone just couldn't boot or hard reset itself after one or two days with many different 6.5 ROMs. Did an mtty task 29 then it looks good now for a week. If it still failed I would follow Fallen Spartan's suggestion to flash stock ROM+SPL.
gerakas23 said:
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!
Click to expand...
Click to collapse
hmmm, after returning to stock rom & SPL. What was your SPL in bootloader? Did you follow dummies guide afterwards and use USPL or HSPL before trying to flash NRG rom? Did you try a different rom? Whats your current SPL?
Before i put back the original spl and my ROM that i got with the phone i thought i should ask if anyone have an idea of what has gone wrong with my phone.
Right now i have HSPL on my phone, i think the name is 1.56 olinex, my radio is 1.14 and my ROM is kwbr topix 3.5 WM 6.1
Over the last months i have tried at leas 20 different cooked ROMS but the always end up with some kind of problem that i did not have before. The phone hangs, the wifi dont work, i can have a ROM on for a week without a problem, sometimes just an hour.I have read every thread there is about it, but i dont find any solution. I do perform task 29 prior to flashing, i have flashed back my original ROM, downloaded from HTC and tried to install a cooked ROM after that, but it doesnt help, the problems are the same.
I can mention that i dont have those problem when i have my orignal ROM on( the one that i have downloaded from HTC).
I would be very glad if anybody could help me cause i dont want my stock ROM back, its so boring.
Thank you for listening.
Forca
did you perfom 2 hard resets after flashing?
Flash a stock rom and see if that helps..
alchopop said:
great, so whats the actual problem?
Click to expand...
Click to collapse
The biggest problem, in my opinion is that the phone hangs, (turns off itself) and the wifi dont work. But maybe its just something that happens to everybody that is not using the stock ROM or am i wrong there.
Forca
alchopop said:
did you perfom 2 hard resets after flashing?
Click to expand...
Click to collapse
Yes, sometimes 3
mwaldi3 said:
Flash a stock rom and see if that helps..
Click to expand...
Click to collapse
Just to make things clear here, when everybody it talking about that it could help flashing a stock rom before you flash a custom rom, do you then mean install the rom that you download from HTC, or a stock rom that you can find in the forums here. The thing is with the stock rom from HTC you dont have to put the phone in its bootloader to flash. If the answer is that i should flash a stock rom that i can find here in the wiki, what rom should i use then, there are like 30 different ones.
Forca
Here is an other question about stock ROMS. Does anybody know if there is a stock ROM with color icons and the my location function? Do i have to have HSPL or USPL on my phone to but a stock rom on it, or does it work with the original SPL.
Forca
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Forcavitale said:
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Click to expand...
Click to collapse
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Fallen Spartan said:
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Click to expand...
Click to collapse
Thank you for helping a noob out here One more noobish question, how do i know if the rilphone and the radio match?Right now i have the radio 1.14 and i found this cab http://forum.xda-developers.com/showthread.php?t=610927, i am not sure if the match, but if the dont what do i look for when i want to download the rilphone file?
Hi. Seems like the only thing you haven't tried is the reapply the HSPL. I've heard that it can sometimes get screwed up and this may account for the problems you're having. Obviously applying the HSPL is risky because if it goes wrong you have yourself an expensive waper weight. Good luck.
Just to get it right, when i flash a stock ROM do i have to wait until its completely installed(i mean booting up installing windows, setting time and date), until i flash my custom ROM or can i just pull out the battery when the smart mobility shows up
Forca
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Bodisson said:
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Click to expand...
Click to collapse
So in other words it could work to flash my old original rom with the original radio on, undo my HSPL to the original SPL, then get USPL on the phone and flash Topix 3,5?
Forca
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
Alright i did what you recommended last night; flashed swedish stock ROM with radio 1.13, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Forcavitale said:
Alright i did what you recommended last night; flashed swedish stock ROM, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Click to expand...
Click to collapse
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
alchopop said:
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
Click to expand...
Click to collapse
Exactly what i have noticed too, Flashed a ROM a few days ago, wifi dont work, i dont do anything but turning the phone off and on again and i works.
Am i using the right rilphone for my radio 1.13? i used this one http://forum.xda-developers.com/showthread.php?t=610927 i use the rilphone my location cab in this post.
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Bodisson said:
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Click to expand...
Click to collapse
In fact the only reason i have radio1.13 on is cause it came along with my stock rom