Database Develop

Having trouble connecting to wireless

Hi,
I've got an Alpine and all the ROMs are simple out-of-the-box as from O2 back in september.
Previously, I would use it to connect to the wireless network in my university. I would turn on the wifi then select the network to connect me to the internet and then enter the wireless key we have been provided with.
However, now it just stays on 'scanning network' and doesn't prompt me to choose a network or enter any key. Sometimes it claims that an IP has been assigned, but it doesn't progress past this. I have tried soft resetting and changing the wifi from 'best battery' to 'best performance'. I have also tried being really near the router.
My friends can access this network just fine on their laptops, and when I run WiFiFoFum it shows up just fine. I am pretty certain the router is a 802.11g one, and I can't tell if it's been changed since I could access it before.
My problem is I know virtually nothing about WiFi, so I don't know how to troubleshoot this. I was hoping someone could give me a bit of help?
Thanks.

try this.
turn wifi on
go to settings
connections
network cards
see if you have networks listed, if u do delete them.
turn off wifi and turn back on again so it searches. see if it picks up the network.
Failing that what IP is it showing u, if its assigned one??

WiFi problems

Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?

Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)

10332007 said:
Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)
Click to expand...
Click to collapse
I do have the connection settings in both IE and Opera set to automatic. I's there somewhere else I have to change settings?
I'm quite sure i typed the password correctly. I also checked the client list on the router and the phone showed up correctly.

Gah, cant remember where I saw it but there was a setting in the phone itself for what to connect to.
Another thing to try under the wifi connection open your saved connection and go into it and see if you have it set to connect to the internet or just to the private network under "network type" in the Wi-Fi sub menu of Wlan settings. Its late and I cant think right, i'll see about checking more into it later...

I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings

Wing + WRT54GL
Hi!
I have an S730 and a Linksys WRT54GL router. I've tried to use wlan with my phone, but it doesn't working. I want to use WPA2 with AES without Radius. Is the WPA shared key (router) same to network key(phone)? without security and encryption, it's working well.. I cannot see any syslog. That could be so easy..

klenovcok said:
I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings
Click to expand...
Click to collapse
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/

ksga said:
Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?
Click to expand...
Click to collapse
Did you check network settings? I mean e.g. if you don't use DHCP server and you didn't fill in right settings phone may connect to network but may not get outside. I know it can look like "lame" question, but sometimes even a master can do a newbie mistake..

ksga said:
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/
Click to expand...
Click to collapse
usually it is in section WLAN Advanced setup - WEP Encryption - disable and in WLAN MAC Filters - active + allow asotiation with table of adress your Wings - aply . I have Zyxel Prestige 660HW.

I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works

ksga said:
I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works
Click to expand...
Click to collapse
Your DNS are also provided automatically? Or could you ping (through some app) to any IP address of any server on the internet? If you succee, then we can look for a mistake with DNS.

Problem solved!!!
Okay. Found the cause for all my sufferings...
Power management. under WLAN-settings i changed power setting from power save mode to best performance...
thanks for all the help. hope next time I have a better question

wifi problem
hello everybody,i have tried several times to connect to my router at home but no chance at the end i got this warning saying:
cannot log on to the wireless network this network requires a personel certificate to positively identify you.

Wi-Fi and WPA secured wireless networks.

Hello to all diamond people,
We all know, there is huge issue with this great phone about Wi-Fi connections. While Wi-Fi is one of the reasons people choosed touch diamond, what is their disapointment when they find out wi-fi doesn't work as it should.
I am talking about problem I am experiencing by myself - I am unable to connect to my home WPA secured and encrypted network. If I turn the security off on my router and wireless network becomes open, there is no problem at all.
But who wants unsecured, open wireless network at home, so all the neighbours can download whatever they want through your network?
Nobody.
During my research throughout forums I have come accross many people, experiencing same problem, but was not able to find the solution to the problem, or what is causing it.
My aim is to gather as many information as possible to help to fix this problem, so everyone could use wi-fi on their own home WPA secured wireless network.
Any ideas?

What is your ROM and radio versions? I've no problem connecting to my WPA enabled network. Which WPA option did you choose? It must match the same WPA option on your router. There are WPA, WPA-PSK, WPA2, and WPA2-PSK, then there are also TKIP and AES to choose from. Try setting both Diamond and router to use WPA-PSK (TKIP) first, this should have the highest compatibility with other WPA supported devices on your network. And make sure you use a strong passphrase, you can use a WPA key generator.

Hey,
both router and HTC are set to WPA -PSK under TKIP encryption. I use my own network key.
The thing is, in wireless lan manager i can see htc does connect, but only for about a second, then it starts reconnecting all over again.
Sometimes it does connect and works for few minutes and sometimes it does connect to router, but not to the internet. It drives me absolutely mad.
I tried Advanced Config -> Network -> WPA authentication - enabled/disabled, but still experiencing problems.
I have heard there used to be issues with ROMs provided by the network operators, but that is not my case.
ROM: DIB Diamond v 1.33
RADIO: 1.00.25.05

WPA secured
Hey,
If You want to use WPA secured wireless networks with Diamond go to Settings-Wireless LAN-Power Mode and there set Power Save Mode to Best Performance. It works
Sorry for my English...

6sauer said:
Hey,
both router and HTC are set to WPA -PSK under TKIP encryption. I use my own network key.
The thing is, in wireless lan manager i can see htc does connect, but only for about a second, then it starts reconnecting all over again.
Sometimes it does connect and works for few minutes and sometimes it does connect to router, but not to the internet. It drives me absolutely mad.
I tried Advanced Config -> Network -> WPA authentication - enabled/disabled, but still experiencing problems.
I have heard there used to be issues with ROMs provided by the network operators, but that is not my case.
ROM: DIB Diamond v 1.33
RADIO: 1.00.25.05
Click to expand...
Click to collapse
I guess it's probably not your ROM, since the DIB Diamond v1.33 is based on the newer 2.03 ROM. I was wondering, do other devices on your network have the same issue or it's only the Diamond? Connection dropping can be many reasons, and one of them is the router itself.
Reddish said:
Hey,
If You want to use WPA secured wireless networks with Diamond go to Settings-Wireless LAN-Power Mode and there set Power Save Mode to Best Performance. It works
Sorry for my English...
Click to expand...
Click to collapse
I don't have any problem even in Power Save mode.

Somewhere I have come accross the information some routers (particullary Belkins) do have problem with windows mobile devices.
Today I wrote to Belkin Support, thay should reply in 72 hours mad, however we may know more.
Since I am using unsecured wireless network now, at least I have activated the MAC addresses lock - only allowed MAC addresses can connect to router now. What do you think, how secure is that? There is no encryption now, could someone see the sommunication between me and the router?

Which Belkin router are you using? Check if there is a firmware update, you may want to try that.
MAC address filtering should be ok for now, it can stop the majority of people who try to use your network, it will take someone with a bit more networking knowledge to gain access to your network, but most people don't have that knowledge.
Yes, people can capture any unencrypted packets and read them. But if you're connecting to a secure website through HTTPS or any other secure protocols, the packets are still unreadable. For example, in the browser, if it's written https instead of http on the address bar, those sites are secure. Most regular websites are not secure though.

I was having a similar problem on my Touch Pro a while back. My router is also set to WPA-PSK/TKIP. Although you said you tried it, the solution for me was indeed to go into Advanced Config > Network > WPA Authentication > Disabled. I then removed all previous wifi settings and then added them again, and it connected without a problem.
It could be that there's something else preventing your connection, but from what I can tell you should at least have that setting disabled.

6sauer said:
Somewhere I have come accross the information some routers (particullary Belkins) do have problem with windows mobile devices.
Today I wrote to Belkin Support, thay should reply in 72 hours mad, however we may know more.
Since I am using unsecured wireless network now, at least I have activated the MAC addresses lock - only allowed MAC addresses can connect to router now. What do you think, how secure is that? There is no encryption now, could someone see the sommunication between me and the router?
Click to expand...
Click to collapse
its pretty secure, as you cant guess the password, you would have to get in and add your device to the list (which you would need the username and password for)

Connection problems 3G/Wifi

Hi guys!
I have a Touch Diamond 2. It's great and certainly an upgrade from my Touch Cruise!
I have a strange problem though. Whenever I try to connect through 3G (T-Mobile Netherlands), immediatly after it makes the connection, it gives the dialog 'cannot connect etc'. 3G is truly connected but no data is coming in.
Now I have found where the problem lies, sort of. 3G works fine when I don't configure my home Wifi connection. Whenever I configure that, 3G stops working. It doesn't matter if Wifi is turned on or off. 3G does have a dynamic ip, where my Wifi connection requires a static IP. But I make all these settings in the Wifi part of the configuration screen, the IP details are under the 802.11 b/g network card.
This used to work flawlessy on my Cruise. Anyone have a solution? Thanks!

good morning. as you are with tmobile i'd suggest you are having the same problems as me with tmobile uk. for some reason tmobile sets up a proxy server in your 3g data connection setup, this caused huge problems for me but clearing it solved them all.
try this first and see how you go.

Possible, but where exactly do I change the proxy settings of the 3G connection?

BeQuietAndDrive said:
Possible, but where exactly do I change the proxy settings of the 3G connection?
Click to expand...
Click to collapse
Hey that's a coincidence, just read the same question at GoT
I have similar problems.
Now and than my HSDPA connection works good, but at some moment I just can't reach any website.
Disconnecting and reconnecting to HSDPA sometimes helps, and sometimes I just have to wait a few minutes and than it works again.
I also tried another DNS (OpenDNS) but it doesn't solve the problem,
Proxy settings can be found at (I assume your dutch):
Instellingen> Meer> Verbindingen> Verbindingen> Mijn proxyserver instellen
At my TD2 is no proxy set, so thats not the cause.
Hope sombody else can help!

Do you have a static IP for WIFI as well? I kinda found out that setting WIFI on dynamic IP solves the 3G problem, so somehow they must be connected. But this should be able to work, it's almost as if 3G 'takes over' the static IP from the WIFI settings, but the connection settings from my 3G are offcourse set to dynamic.

I had exactly the same problem with my D2. I also had it on my Cruise with the later ROMs. The official HTC 6.1 ROM did not have this problem.
I experience it when I set up my wifi 802.11b/g network card in the phone to have a static IP address and set the default gateway. If I use DHCP there is no problem.
Setting the wifi card up on the phone DEFINITELY screws up the cellular data connection.

BeQuietAndDrive said:
Do you have a static IP for WIFI as well? I kinda found out that setting WIFI on dynamic IP solves the 3G problem, so somehow they must be connected. But this should be able to work, it's almost as if 3G 'takes over' the static IP from the WIFI settings, but the connection settings from my 3G are offcourse set to dynamic.
Click to expand...
Click to collapse
I use a dynamic IP, for me it doesn't work.
With my dear old Wizard (MDA Vario) I had no problem at all with the same settings!

yup thought i was the only one with this problem need a fix for it soon man otherwise we are gettin bumped for not havin the settings coz we on t-mobile

I solved it temporarily by setting Wifi to dynamic IP, but this prevents me from connecting at work. I'll send HTC an e-mail, let's see if they are willing to hot-fix this one

for me i find that the web sites work but any app that requires to go online ie facebook, msn, sky fire etc jus dont work wen you try to connect online......... stupid t-mobile

My connection problems are gone.
Maybe I (we) encountered hickups with the T-Mobile proxy-server....

maybe You can help me.
I have a MDA V (germany T-Mobile) and i can not connect to my AP here at Home.
I have a ASUS WL500g configured as AP behind my Firewall/Router. All other device in my house, a Laptop, a Netbook and a 'WII' working fine!
All get the IP from the Router, the AP works transparent.
D2 will not connect. The Mac-Address from the D2 is configured in the AP, and i can see the router statuspage and see the MAC of the D2 sometimes in the list. But only as "associated" and never as "associated authorized" as the Laptop here in example:
-------------------------------------------------
Stations List:
-------------
00:23:76:yy:xx:xx associated <-D2
00:1C:BF:yy:xx:xx associated authorized <- Laptop
--------------------------------------------------
I configured a lot in the settings, but i cant get the D2 online with wifi.
Can someone plz help a bit?
-
other question: if i manage the problem some day, is it possible to configure the Networksettings of the D2 device in the way that the device only use USB and te WiFI-Connection to access the internet? I hat it that the device use mobile-internet connection without asking me to do so.

Same problem
BeQuietAndDrive said:
I solved it temporarily by setting Wifi to dynamic IP, but this prevents me from connecting at work. I'll send HTC an e-mail, let's see if they are willing to hot-fix this one
Click to expand...
Click to collapse
I was experiencing the same problem, only with the difference that I am using 3 different Wi-Fi adapter settings every day (for 3 different networks - two with fixed IP and one with DHCP enabled. Most elegant solution that I came up with was a small, but very handy application called "WiFi Profiles". Settings for WiFi adapter are easily changed by choosing a profile that you want to use and applying it. Before you disconnect from WiFi network, you just set adapter to DHCP, and after that your GPRS/3G/HSDPA connection works like a charm. By the way, I am proud owner of Touch HD but I am using Dutty`s Topaz based rom V3.4 XTREME SHIP.

Kaiser Wifi jumping all over the place

Hi,
I recently upgraded to WM6.1 Rom and have several wireless Networks that i access in the same location.
I have noticed that it tries to connect to the strongest then will flip and try another without giving it sufficient time to receive an IP address.
Is there anything i can do?
Thanks

I have a similar problem.
1. I go to the comm manager and enable wifi
2. I go to Settings-> Wireless LAN
3. I get a screen that has:
SSID
an option to change the network
Mode
BSSID
Tx Rate
Rx Rate
Channel
signal quality
4. This screen will switch between showing the network that I am trying to connect with: SSID, mode, ESSID, and channel all filled in correctly as well the signal quality being almost 100% and no network.
5. It may be worth noting that when there is no network listed the channel changes.
6. I have tried rebooting both the phone and the router.
I am using the official WM6.1 ROM. I have tried WPA-PSK and WPA2-PSK and I have double checked my key multiple times. I have tried configuring the phone to use TKIP and AES keys.
Does anyone have any ideas?

OK, I made a couple of changes but my current setup is:
WPA2
AES key
Wireless g/n mode
Dlink DIR-655 router
visible SSID
and everything seems to be working. The only thing I can figure is that maybe the passkey was bad originally although I had tried it a couple of times.