Related
i found this file in trinity forum. it works perfectly. some of it is in french and some of it is in english. can someone help to clean up.
it is the complete cab including ftouchflo, schaps config, and cube all in one cab file. just install and use.
woow, does it work on any Device ??
I installed it, nothing shows up in the today screen. I've tried to play around to make the cube show but nothing happens.
it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.
herg62123 said:
it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.
Click to expand...
Click to collapse
Nice it work after I configure it.
EDIT: Anyway to change it from Spanish to English?
Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools
ladytoast said:
Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools
Click to expand...
Click to collapse
Haha yeah herramientas mean Tools in Spanish.
I had to remove this program because it was messing up with the slide 2 unlock program.
Sensational find, well done
The program works great and has a huge coolness index factor....
I tried to set the photos to open a file in the storage card and would not do it. Is it limited to opening files that are only in the device memory? Can it address files in the sorage card?
Nice program overall.
English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668
taiseer999 said:
English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668
Click to expand...
Click to collapse
Well, just un-installed the Spanish version and installed this. Appears to work perfectly, I can't see any problems at the moment. I had to rename the FTouchFlo folder so that the configuration tool would work but other than that this was too easy.
First class work!!
go into config cube and all word editing done from there.
found 6 side cube vista like and settings to change the programs
herg62123 said:
found 6 side cube vista like and settings to change the programs
Click to expand...
Click to collapse
.... but not working on Kaiser!
TQM
Hi,
just one question: does the TouchFLO CUBE work on the TYTN II ?
I heard that on Tytn II it needs a cooked ROM not just a sw on top of already installe TouchFLO.
Could somebody tell me something ?
Thanks in advance
works perfectly after configuring it, gotta get use to the spanish though but i guess im taking it as a humor thing LOL
hi i have problem with the ftouchflo after installing it .....
i do have a problem with the text on mine, i mean in office words and messaging,
I cant select the text (that is to use stylus click drag a paragraph of text) to be copy and paste or something like that.......... i cannot select the whole text...maybe u can help me?? this applies in excel,words, messaging, notes, task ...but in appointment i can select a few text.......................also in resco explorer, normally i can click drag and select a few files to multiple delete (and no i dont wanna use the multi seelect, its extra buttons..)
and btw i have added all the above mentioned files intothe config for exclusion of scrolling and stuffs..........so maybe u can help me? thanx alot
I think the touchcube thing is cool, but i would rather it only works on the homescreen, its just annoying anytime else, when trying to do daily activities and you bring up the cube or minimize the program. can this be done?
i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?
fluxs2 said:
i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?
Click to expand...
Click to collapse
deinstalled everything for the third time.. did a reinstall.. copied all the folders again to "PRogram Files" and guess what... IT WORKS!!!
Hi,
I have a Treo 750v (Vodafone version) which like what it's box said it is meant for email solution, that's why the left soft menu of the Today screen menu is set to Email.
Anyone know how to change this?
Thanks, appriciate your share of knowledge!
I forgot the details but this i know as much
You have to download the register editor program. Search around the registry is all the same when it comes to changing soft key for all WM phones.
The only problem with the Treo 750 is when you change the softkey from email to something else it ends up adding an extra short cut. So in essence you are not overwriting that key, all you are doing is adding an extra feature on top of the existing email button.
Maybe someone had better success than I did can chime in
Using a registry editor, navigate to Hkey_Current_User/Software/Microsoft/Today/Keys/112
Change all 3 values to reflect your new function
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
awesome!
mtiberio said:
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
wow, thank you very much mtiberio!
your link really hit the spot!
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
tinyflier said:
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
Click to expand...
Click to collapse
It's all because Palm plugins - they overlay it. If you disable Active Call (or Dial Lookup?) you can have native-windows softkeys. It was all described in instructions how to ged back default dialpad.
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
was it:
"FdcSoft SoftkeyAppletEx.cab"
Gyngabread Man said:
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
Click to expand...
Click to collapse
it would be great if you share the file or where you get it, so we all can get it too...
mtiberio said:
was it:
"FdcSoft SoftkeyAppletEx.cab"
Click to expand...
Click to collapse
it is caled softkeyapplet but its not a cab it was a zip i just unzipped and put in my windows folder i believe... i will look in my external driveand post it im not sure where it is but i'll try to find it
ok i found it on my drive but i did some searching on the forums and alot of ppl mention it but dont upload it and im guessing its for good reason... dont wanna piss ppl off by posting something i shouldent if its ok though then i'll do it but i think its the same one your talking about for me it worked like a charm no reg editing
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Chillin said:
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Click to expand...
Click to collapse
Hi, thannks for the direct links. I'm going to try installing it. i hope it'll be fine.
seems it doesn't work with wm6. after installing it, the program isnt available in my program.
i have a remaping app for my tilt , but i cant seem to find the lnk or exe for device lock.
any one can help me on remapping my left softkey to "lock my device"
thanks !
Re - Remap left softkey to lock the phone
Why don't you try HTC end Key.cab, it works great and you don't have to lose the use of the soft key.
see - http://forum.xda-developers.com/showthread.php?t=356192&highlight=Long_End.lnk
I use this right here courtesy of AllTheWay.
Vampire2800 said:
I use this right here courtesy of AllTheWay.
Click to expand...
Click to collapse
I just tried this and the phone lock is not an option on my phone with this. Also when I tried to uninstall this cab my left softkey that is mapped to calendar, now gives me an error, something like, the file 'htc calendar cannot be opened......' Also when I installed it, it changed the color of my today screen back to att default. I fixed this by just changing my theme and then changing it back. Any clue how to make the calendar button work right again?
alright im going to take a look @ that.
What Rom are you using?
Found the solution for you but need to know what ROM you're running.
On your phone, open your registry editor. If you don't have one, get it here. Navigate to HKCU\Software\Microsoft\Today\Keys\112\Open. Change the Data String from \Windows\??????? to (This is what a stock ROM should be) \Windows\Start Menu\Programs\Device Lock.lnk
If you have a different ROM, I have no clue. But, I will keep checking for ya.
I am running the stock rom from att. I don't have a registry editor yet, but I will try the one you posted and try to fix it in the morning, when I get back up to work. Thanks!
Good luck, bro. I'd check the link I provided (Windows\Start Menu\Programs\Device Lock.lnk) to make sure that Device Lock.lnk is there. If it is then you'll be good to go. If not, check in other folders for it. It will be in your windows folder or windows sub folders somewhere. Let us know how it turns out for you.
i think that devicelock.lnk is what i cant find when remapping . its not in my windows folder
im using L26 v11 Rom
I am not able to find the devicelock.lnk either, I have looked in the windows/startup/programs folder and it is not there. I looked all through the windows folder also and could not find it although the windows folder itself is quite large and I may have just missed it.
Introduction: I have searched an answer to my question both in xda-developers, in SE Xperia X1 forum and in wkTask manual.
Questions:
#1: is there a way to have wkTask always on top/in front of WM today screen?
#2: is there a way to add to the laucher other links other than those on Start menu? (to make it simple: how can I add to the launcher links that are in Settings folder? I neither can find them on my PDA)
Thanks to you all, as always!
P.S.: great program wkTask... would suggest to cook it into Jack's lite Rom, using it I can almost use no panels at all!
you've lost me on number 1 im afraid, what do you mean wktask is always showing on my topbar
Ive used WkTask since way back in all my devices, but now with X1 I felt it was causing problems... Some weird crashes and I switched to P +'s task manager... WkTask is great but now I just learned to live with other tools.
that's odd, I found quickmenu causing some issues, not wktask
I stopped using it so long ago that I can remeber exactly what were the problems, but there were some crashes and whatnot..
I use Wktask as well, just not the quickmenu it has. Works like a charm for me!
Works fine on my X1 as well!
fards said:
you've lost me on number 1 im afraid, what do you mean wktask is always showing on my topbar
Click to expand...
Click to collapse
#1 is: can I get the wk launcher always on top? actually, I can get it after a vertical move. I would want it to be always on top, but just on today screen.
#2 no answer?! :-( bad for me...
Loco5150 said:
Ive used WkTask since way back in all my devices, but now with X1 I felt it was causing problems... Some weird crashes and I switched to P +'s task manager... WkTask is great but now I just learned to live with other tools.
Click to expand...
Click to collapse
Man, no problem here, it is working and it is great!
[email protected] said:
#1 is: can I get the wk launcher always on top? actually, I can get it after a vertical move. I would want it to be always on top, but just on today screen.
#2 no answer?! :-( bad for me...
Man, no problem here, it is working and it is great!
Click to expand...
Click to collapse
what you want from 1 still isn't too clear, I think it might be a translation problem
You're saying you want it always on top just on the today screen. Which is a contradiction..
I'm presuming that means you only want it active on the today screen, if so then I think the answers no as that's not what Wktask is about..
You can get it to disappear on the today screen by checking the tickbox "hide the task-list when there are no tasks"
I tend to hide always START (manilla-tf3d) and activesync
2) yes but it's not that easy. control panel items are .cpl some are .dll and others are .exe will start normally some wont.
They should all be in windows.
fards said:
what you want from 1 still isn't too clear, I think it might be a translation problem
You're saying you want it always on top just on the today screen. Which is a contradiction..
I'm presuming that means you only want it active on the today screen, if so then I think the answers no as that's not what Wktask is about..
You can get it to disappear on the today screen by checking the tickbox "hide the task-list when there are no tasks"
I tend to hide always START (manilla-tf3d) and activesync
2) yes but it's not that easy. control panel items are .cpl some are .dll and others are .exe will start normally some wont.
They should all be in windows.
Click to expand...
Click to collapse
#2 solved, they actually are in windows folder, but I needed to tick the "show all files" option under menu. Then, copy the exact name and insert it manually on the launcher.
However, the name of the .exe, .dll, .*** it is not the one shown on the settings panel
#1 I'll try to explain myself. In Windows (normal one, not mobile) you can have some windows always on top.This mean that the "always on top" window will always stay in front of everything. Now, on WinMo, I really like the wktask launcher. But, it is not always visible on my screen, every time I need to activate it. Is there a way to have it always visible?
Hope I've been able to explain the point, otherwise thanks anyway, I'll survive without this trick, take an English course and come back to explain it
[email protected] said:
#2 solved, they actually are in windows folder, but I needed to tick the "show all files" option under menu. Then, copy the exact name and insert it manually on the launcher.
However, the name of the .exe, .dll, .*** it is not the one shown on the settings panel
#1 I'll try to explain myself. In Windows (normal one, not mobile) you can have some windows always on top.This mean that the "always on top" window will always stay in front of everything. Now, on WinMo, I really like the wktask launcher. But, it is not always visible on my screen, every time I need to activate it. Is there a way to have it always visible?
Hope I've been able to explain the point, otherwise thanks anyway, I'll survive without this trick, take an English course and come back to explain it
Click to expand...
Click to collapse
You've made that perfectly clear now ;-)
But I think the answer is no. Maybe ask the author of WKtask if he could implement it as an option?
You do know that you can set the launcher to open by Drawing down with your stylus from the X of wktask?
That's pretty instant on my X1
fards said:
You do know that you can set the launcher to open by Drawing down with your stylus from the X of wktask?
That's pretty instant on my X1
Click to expand...
Click to collapse
Thanks!
Yes, I know, and that's what I do every time... but I am so laaazyyy
Could you share where you got your working .cab? I got mine off http://soft.photoracer.net/docs/wktask_en.html but it now shows a gray-white bar across the entire top a couple pixels down.
Magger said:
Could you share where you got your working .cab? I got mine off http://soft.photoracer.net/docs/wktask_en.html but it now shows a gray-white bar across the entire top a couple pixels down.
Click to expand...
Click to collapse
yep thats correct, its the battery level
first time i used it i hated that, but now i find it indispensible
you can turn it off in the preferences - general2 tab
question for the one who use wktask with their xperia: The OK button (not the OK from WM, the OK touch in the right bottom corner) does not close the program but hide it when wktask is launched. Is it a bug or something expected ? If it is not a bug, how is it possible to close any program by pushing the OK key, as a default behavior ? any idea ???
Launcher settings backup
Hi, how can I backup settings of WK Task Launcher?
I have WK tasks with full settings launcher in HTC Raphael and I will put them to new phone - Xperia X1 (and I wan´t NO to set launcher again). ;-)
GuiPoM said:
question for the one who use wktask with their xperia: The OK button (not the OK from WM, the OK touch in the right bottom corner) does not close the program but hide it when wktask is launched. Is it a bug or something expected ? If it is not a bug, how is it possible to close any program by pushing the OK key, as a default behavior ? any idea ???
Click to expand...
Click to collapse
Go to the preferences menu of wktask. Tap on the 'Actions' tab, and you can set preferences for the OK button.
WKtask works great on my xperia. I don't use the launcher at all, but I wouldn't know how to function without the task manager.
WKTask Launcher settings Backup
Here is answer from directly from maker of WKTAsk:
The settings of WkTASK are written in registry.
So you can backup them by using "PHM Registry Editor".
http://www.phm.lu/Products/PocketPC/RegEdit/
Backup steps
1. Open \HKEY_CURRENT_USER\Software\waku\WkTASK.
2. Tap&hold WkTASK folder icon
3. Select "Export" and input file name
Regards,
waku
I use for this not PHM Registry Editor, but Total Commander, and without problem. In new phone/install only copy the WkTask.reg into registry and softreset. It´s easy
Is the a New WkTask for WM 6.5 ?
I have Att Tilt2
Right now, the only way to list ALL programs is to tap on your start button, then tap on "all programs" below.
However, I feel more comfortable with the old windows programs list with 3-4 rows of icons. How can I get that back without removing the TF3D2 start menu?
Perhaps someone knows a shortcut to it?
Perhaps a shortcut to the windows settings page would be useful too.
Thanks!
hi..
u can try this it is a program that will give u the classical start menu ( like older version of WM) and will put the program icon on the lower task in the manilla theme>> so u can get the advantage of both..
wish u like it
pocket pc ana said:
hi..
u can try this it is a program that will give u the classical start menu ( like older version of WM) and will put the program icon on the lower task in the manilla theme>> so u can get the advantage of both..
wish u like it
Click to expand...
Click to collapse
Thanks for yr reply, but I've come across this before.
The thing is, I want to retain HTC's new start menu, at the same time have a shortcut to WM programs list.
MasK said:
Thanks for yr reply, but I've come across this before.
The thing is, I want to retain HTC's new start menu, at the same time have a shortcut to WM programs list.
Click to expand...
Click to collapse
if u find that plz post it here.. i was looking for it.. good luck