Related
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Do you have a copy of the Wizard Love rom? If so, install that in bootloader mode. Remember to plug your USB cable into the phone.
drivex said:
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Click to expand...
Click to collapse
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
drivex said:
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
Click to expand...
Click to collapse
I would suggest flashing back to a carrier aku2.x rom and ensure that your phone will come up properly on it. If it does then good, it's most likely not a serious hardware issue, if not then you might be out of luck.
looks like a brick to me..
So sorry m8.
I hope you can revive it !
Had similar problem with the Super rom.What worked for me was taking a back up on the memory card and reflashing from the card.Read the Wiki about details on how to go about it.
Try to flash the latest t-mobile ROM found on their site if all the suggested doesnt work..
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
I've done. I used method with mtty and i copied os to sd card, after that i reflashed using minisd card and it works. Thx for everyting, u guyz do great job here hehe
Me too !
cyberdrakula said:
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
Click to expand...
Click to collapse
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
cachep2004 said:
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
Click to expand...
Click to collapse
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Pls show me another ways !
UfOuN said:
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Click to expand...
Click to collapse
I'm living vietnam, so i'm trying to find out another ways, but i think they have no equipments.
Bless god for me.............pls
Revive Wizard
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Thanks alot !
sleurhut said:
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Click to expand...
Click to collapse
Thanks alot my friend, I will do it !
"FORMAT FAIL" again again pls ... help me !
( I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...)
Pls ! Help me...."FORMAT FAIL" again again pls ... help me !
The hard reset doesnt work
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
ecomajor said:
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
Click to expand...
Click to collapse
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
mfrazzz said:
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
Click to expand...
Click to collapse
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
ecomajor said:
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
Click to expand...
Click to collapse
Not that I know of. Thats one of the reasons its recommended you start with a battery that has over 50% charge (personally I never flash with less than 100% in case something goes wrong). Not saying you didn't do that, but you appear to now be trying to work with a dead (or almost dead) battery, and that will only make things worse if you try to flash and then the battery dies in the middle (maybe not worse, but it sure won't help).
Like I said, you'll need to find someone with a similar phone or see if your local cell provider office will let you charge it (or swap it for a charged battery).
I got my ppc back up and I tried reflashing again and I have almost the same issue. It says format is successfull but then it gets stuck at the blue screen.
Hi Guys,
I have a great Problem with my XDA Diamond! Since one month my touchsreen didnt response! At the moment runs olinex 1.40 at the pda. I have flashed the newest o2 rom and that work without a problem! But i cant start my device because the first adjust doesent work.... (touchscreen dosent work). I tryed Hard-SPL Unlocker post 39 that i can send my device back to the O2...
but at the process on the screen of my pc i have 0% for a time than came Error 202: connection....
activesync is ok!
I have tryed to update the olinex but the same problem ...
also with other roms...
I hope anyone of you have a idea because i wanna have my pda back ....
sorry for my bad english!
Thanks a lot!!!
L3xX
If Your touchscreen doesnt response, i think it would be a external problem. Did you drop it?Water spill...Maybe try flashing a new rom like Energy Rom 6.5 with maila 2.5(sense 2.5 UI) I just got my CDMA Diamond this Saturday. Great phone with the Windows Phone 6.5 Rom. Sorry but i tried to help but couldn't. If u have a warranty try to e-mail or contact HTC, maybe they might send you back A HTC HD2! Oh the link for Energy Rom is at PPC GEEKS - http://forum.ppcgeeks.com/showthread.php?t=74084
I had the same problem
There are two different ways I fixed mine
1) Press and hold the power button + volume down + enter button (menu) while holding press the rest with the stylist. continuing to hold the buttons until a white screen comes up allowing you to hard rest the device.
2) If 1) doesn't work try try unlocking your phone again then putting a new rom on it. (this will work as long as your phone will connect to the computer, with two beeps)
well I hope this helps
Hi great thank to you! but this steps i´ve allready done!.
Bevor i can give my device into de warranty i musst flash the normal bootloader!!! in my eyes this Hard-SPL Unlocker
But this dosent work!
My HTC Diamond have some trouble: Every time I turn it on, it boot to splash screen and then restart, then go on splash screen and restart again, again, and again.It dont boot to Windows.
I am using 2.03 WWE ROM anh tried to reflash so many rom, both Rom ship and cooked rom but still no hope.
I tried to downgrade its SPL from 1.40 Olinex to original SPL as following thread: http://forum.xda-developers.com/showthread.php?p=2324837#post2324837
But not work, in tri colors screen is still 1.40 Olinex
So anyone pls help, I love my Diamond so muc, dont let it dying like this. PLS...
I do MTTY everytime i flash new ROM
well, has happened to me before, I just take out the battery and leave it out for couple minutes and then should be ok, try starting it when is on the charger, also hard-reset is always an option. I think that is softwware based problem.
cheers
My diamond also started doing this yesterday night, it was working fine until now. I have flashed it with Donsalaris rom which came out Xmas last year and its been working fine for over 6 months now.
Then yesterday night after a long chat it started to do this ??..
I tried taking out the battery still no good. I hard reset it and now works fine for sometime like a few hours to a few minutes and go into this restarting cycle again.
I'v left it on the table and out of the blue it will reset it selfs and start the cycle ?
Seems like a software problem but a hard reset should have solved it right ? But it only partially solved it
Anybody gott a clue as to what it might be ???
Hello, i was tired of duttys rom so i decided to install the orginal 6.5 windows rom.
It got to 16% and then it got stuck, i tried again a couple of times but it stopped at 16% all the time.
Then i tried to hard reset it, nothing.
Now i tried to install the newest dutty rom.
Now i'm stuck at the "Touch diamond 2" loading screen.
How the hell do i fix it?
Also it loads the RGD thing, but then it just freezes
Please help :s
What does your SPL show?
My spl? Do you mean the RGD thing? if so:
R: 4.49.25.91
G: 61.44etc.25.35U
D 2.53.Dutty
No, put the topaz in bootloader and you can see your actual SPL
SPL-1.33.0linex (stupid 5 mins for edit..)
- Turn off your device using the power button
- When the device is turned off press simultaenously the volume down button + Power button
- Your device will startup in Bootloader mode with band tricolor
Thanks for the help. You sure saved my weekend.
(Got help over pm)
**Deleted**
Nuggi, would you be so kind and share the info with the rest of us, as I have exact same problem as you did in the first post.
Phone dropped to ground, screen got bit smashed so I thought to send it to repair. I put original SPL and 6.1 rom inside and boom, doesn't boot anymore.
EDIT: Found this post, checking now if it works. http://forum.xda-developers.com/showthread.php?p=7191733#post7191733
EDIT2: Success! The software started all fine.
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
try get a hammer and gently hit it as hard as you can for a couple times. here it is! you got a new radio version. i did this with my kaiser because i do not understand why i was so naive when i bought this piece of s#it!
thehou said:
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
Click to expand...
Click to collapse
should make sure you Kaiser is "application unlocked", run SDA_ApplicationUnlock installed on your PC then copy sspl 1.56.exe to your device and run it !!!! to solve the problem on the device you must try hard reset at device (Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data )
lexpet said:
try get a hammer and gently hit it as hard as you can for a couple times. here it is! you got a new radio version. i did this with my kaiser because i do not understand why i was so naive when i bought this piece of s#it!
Click to expand...
Click to collapse
Hei dude , you really crazy lexpet <<<< Crzy
Hakim Rahman said:
should make sure you Kaiser is "application unlocked", run SDA_ApplicationUnlock installed on your PC then copy sspl 1.56.exe to your device and run it !!!! to solve the problem on the device you must try hard reset at device (Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data )
Click to expand...
Click to collapse
yow bro dont worry here is a thread that will set set you right its everything about radio that just helped me : http://forum.xda-developers.com/showthread.php?t=393182
thehou said:
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
Click to expand...
Click to collapse
rom to MyPPC_MLs_K3.1_0816.zip also check the radio version the uploader who left the rom uses that can be of great help since you will know which one to use.
I have my shares of problems when i comes to this same issue so i took the time out to help you. Cheeer man
Moving to General because the Question is NOT DEVELOPMENT related.
Hello ALL and thank's for your reply,
First to restart my mobile phone I have used the mtty.exe with this manipulations :
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.
founded HERE
Second problem is to update radio, I have mysteriously found a link to a ROM update of orange France, after installing iit, my radio become 1.65.16.25 with WM6.1, I wasn't satisfied with the orange rom so I tried to install the MLS K3.1,
AND NOW .... all it's ok, sound, photo, bluetooth.
One more question please : do you think that I use my mobile with this radio or it's better to me to update it to 1.71.... is there a very difference or no ???
Link to ROM Orange France wm6.1 August 2008 HERE
Hello,
now I have another problem, I think that it's big one, I think that it's a big one, I explain.
I tried to install a new dialer, so I installed it into the phone, the phone restart ... and now nothing, he reboot continually.
I tried mtty with set 16 0, task 8, after task 0, and here he doesn't boot, I see the orange logo with the r ... g ... B .... in the left down and here STOP.
I tried Hard reset, 100 % ok BUT NOW I see only logo of Orange but not radio version, from version, nothing only the Orange logo.
So I flash with the original ROM of Orange, all is ok until 100 % but the same, he reboot, I see orange logo, 5 seconds after he rebbot another time, Orange logo, 5 seconds, reboot ....
Please help me to resolve the problem.
after 5 minutes without battery, I get the information in the left down and the mobile start with the WM6.1.
So I can't install a new dialer :-((
Thank's a lot
thehou said:
Hello,
now I have another problem, I think that it's big one, I think that it's a big one, I explain.
I tried to install a new dialer, so I installed it into the phone, the phone restart ... and now nothing, he reboot continually.
I tried mtty with set 16 0, task 8, after task 0, and here he doesn't boot, I see the orange logo with the r ... g ... B .... in the left down and here STOP.
I tried Hard reset, 100 % ok BUT NOW I see only logo of Orange but not radio version, from version, nothing only the Orange logo.
So I flash with the original ROM of Orange, all is ok until 100 % but the same, he reboot, I see orange logo, 5 seconds after he rebbot another time, Orange logo, 5 seconds, reboot ....
Please help me to resolve the problem.
Thank's a lot
Click to expand...
Click to collapse
try for radio upgrades, maybe it can help you! you can look here ===>> http://forum.xda-developers.com/showthread.php?t=393182 try to continue and do not despair
Hakim Rahman said:
try for radio upgrades, maybe it can help you! you can look here ===>> http://forum.xda-developers.com/showthread.php?t=393182 try to continue and do not despair
Click to expand...
Click to collapse
Salam, thank's for your response
From the last install of dialer and the bug of reboot, I have reflash my tytnii correctly BUT the problem that I have now is when my sim card is installed, the phone reboot systematically.
If I leave the simcard in the phone but I start with the Off line mode, it's ok, Just I change the mode to telephone here .... reboot ...... what the dialer have made in my phone ???????
thehou said:
Salam, thank's for your response
From the last install of dialer and the bug of reboot, I have reflash my tytnii correctly BUT the problem that I have now is when my sim card is installed, the phone reboot systematically.
If I leave the simcard in the phone but I start with the Off line mode, it's ok, Just I change the mode to telephone here .... reboot ...... what the dialer have made in my phone ???????
Click to expand...
Click to collapse
I think you get caught by Simdoor issue ...! try to search for sim unlock program for kaiser and install on your PC !!! You can find it here -->> http://forum.xda-developers.com/showthread.php?t=375583