Database Develop

HELP

Hey I have a T-Mobile Vario with SPL 1.03 I tryed to just update the Radio Rom and I think I forgot to unlock CID !............
Now I can't get any connections anymore not even USB.............can anybody help me plz !!!
Also my keyboard doesnt work anymore ! when i restart it doesn'T even show the GSM or Radio Version anymore !!! Is there any hope !?
and it's slower than before............
Now, the next morning it won'T start at all ! only black screen ! sh***
Thx for answering !

I've the same problem. After flashing no radio work and all things are very slow. The next day it don't want to start up any more :-(
But I doesn't forget to unlock the CID.
What can I do now?

I don't know how but I got it back to start one more time but it crashed down after the Windows bootscreen and now it won't start again :-(
*update*
sometimes (after couple time of pressing reset, removing battery, ....) the device turns on and start to boot (or start bootloader when I press the button) but after a few sec. the screen is black again.

Ok, I found a solution in this forum.
The new ROM kills my battery but I got it back to live with the a 6V charger

Wizard flashed and now dead?

I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????

Do you have a copy of the Wizard Love rom? If so, install that in bootloader mode. Remember to plug your USB cable into the phone.
drivex said:
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Click to expand...
Click to collapse

i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((

drivex said:
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
Click to expand...
Click to collapse
I would suggest flashing back to a carrier aku2.x rom and ensure that your phone will come up properly on it. If it does then good, it's most likely not a serious hardware issue, if not then you might be out of luck.

looks like a brick to me..
So sorry m8.
I hope you can revive it !

Had similar problem with the Super rom.What worked for me was taking a back up on the memory card and reflashing from the card.Read the Wiki about details on how to go about it.

Try to flash the latest t-mobile ROM found on their site if all the suggested doesnt work..

@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.

I've done. I used method with mtty and i copied os to sd card, after that i reflashed using minisd card and it works. Thx for everyting, u guyz do great job here hehe

Me too !
cyberdrakula said:
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
Click to expand...
Click to collapse
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!

cachep2004 said:
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
Click to expand...
Click to collapse
this is dead your flashrom chip in pda. repair only change semiductors or all board.

Pls show me another ways !
UfOuN said:
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Click to expand...
Click to collapse
I'm living vietnam, so i'm trying to find out another ways, but i think they have no equipments.
Bless god for me.............pls

Revive Wizard
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.

Thanks alot !
sleurhut said:
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Click to expand...
Click to collapse
Thanks alot my friend, I will do it !

"FORMAT FAIL" again again pls ... help me !
( I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...)
Pls ! Help me...."FORMAT FAIL" again again pls ... help me !

The hard reset doesnt work
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.

ecomajor said:
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
Click to expand...
Click to collapse
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.

mfrazzz said:
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
Click to expand...
Click to collapse
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?

ecomajor said:
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
Click to expand...
Click to collapse
Not that I know of. Thats one of the reasons its recommended you start with a battery that has over 50% charge (personally I never flash with less than 100% in case something goes wrong). Not saying you didn't do that, but you appear to now be trying to work with a dead (or almost dead) battery, and that will only make things worse if you try to flash and then the battery dies in the middle (maybe not worse, but it sure won't help).
Like I said, you'll need to find someone with a similar phone or see if your local cell provider office will let you charge it (or swap it for a charged battery).

I got my ppc back up and I tried reflashing again and I have almost the same issue. It says format is successfull but then it gets stuck at the blue screen.

upgrade fails

Hello,
I`m trying to get latest lvsw wm6 to the device.
I own the phone since today.
I made the following steps:
Execute ROMUpdateUltility (Hard-SPL)
->Next->Next->Update
From: Image Version 1.16.407.2
to: Image Version 1.20
->Next -> Next
On the phone:
Enterbotloader.exe
"blabla"
YES
On the computer:
ERROR[246]: Device not responding
On the phone:
IPL-SSPL by Des
SPL-1.07.ds
ok,
trying to run ROMUPdateUltility again...
next next next... he shows me the progress bar --> finished! YES!
Rebooting the phone --> same software version as before the update?
trying to update for 2 hours... just to use gps as advertised

please help, i tried the official Update from HTC -> successfull but effects! programs, contacts etc still there, same version number!

messiah said:
please help, i tried the official Update from HTC -> successfull but effects! programs, contacts etc still there, same version number!
Click to expand...
Click to collapse
I've the same problem [246] upgrading unofficial roms like
GSM_1.41.00.11
and
ROM_ING_WM6_2.27
The only upgrade I make successfully is original
htcp3600-RUU_Trinity_HTC_ITA_1-23-408-2_103_6275_1-38-00-11_108
what's wrong ?
P.S.
I test it using activeSync 4.2 & 4.5

Messiah..... Have you read the very first post in the LVSW ROM thread?
I am NOT having ago, just checking, seems you may have miss-understood.
Grab ALL 3 downloads listed there.
Apply first one, and yes there IS NO real visible change to the phone apart from it has been hard SPL'd
Now apply Second one, will go through the same process BUT the Radio ROM is changed and updated
Now Apply the Third and WM6 is installed
The failure you describe is the computer dropping Activ Sync and then "seeing" the phone in Bootloader mode, which is why it take 2 bites of the first cherry, after that all "should " be ok.
I managed to get mine on the first attempt so it is "Me Proof"[TM] and "Just Works" (c)..... however report back if this hasnt helped

yeah, the process you described tells me that you've loaded hard-spl on your phone.. that's all. No WM6 yet...

I have the same problem.
I have Hard-SPL'ed my Orange M700
Then reboot and reestablish Active Sync
Then I have updated the Radio Rom
Then reboot and reestablish Active Sync
and now it's 1.41.00.11 in settings/system/device information
but when i apply
20070527_Trinity_WM6_v2.0.1.1 it uploads then i power on my device and it's still WM5 ?
What am I doing wrong??
Any help appreciated.

This may be a stupid question but have you SuperCID your device before running the updates?
If you go:
Start -> Settings
System
Device Information
What does it say under Radio version? (Just checks the second step has been completed successfully).
Also when you enter the bootloader what does it say on the screen?

akirainblack said:
This may be a stupid question but have you SuperCID your device before running the updates?
If you go:
Start -> Settings
System
Device Information
What does it say under Radio version? (Just checks the second step has been completed successfully).
Also when you enter the bootloader what does it say on the screen?
Click to expand...
Click to collapse
I thought you didn't need to SuperCID the device (http://forum.xda-developers.com/showpost.php?p=1245390&postcount=70)
My radio Rom shows 1.41.00.11

TBH I don't know. But it can't hurt to try it, I SuperCID mine and it flashes perfectly each and every time.
I'm merely trying to make suggestions that may get a result.
Oh, you didn't tell me what the bootscreen said and what version of Activesync do you have on your PC?

While doing the SuperCID upgrade i was wondering: After flashing any of the ROMs do I reboot or power On manually or wait for the device to reboot itself as the message in the SupoerCID tool suggests:
If radio upgrade went fine, wait until your phone reboots and make sure
ActiveSync is enabled again (you should see green icon in system tray)
Click to expand...
Click to collapse

Stupid Q: How can i make the boot screen stay long enough so i can write it down?
My ActiveSync is 4.5 on WinXP

Rummage around in Start--> Setting --> device ID, and version and stuff...... they are there and you get the same info as on the boot screen... and it stay on longer ;-)
Sorry if a little vague but away from phone at the moment......... erkkkkkkkk
/me runs off to find it so this may get edited

akirainblack said:
TBH I don't know. But it can't hurt to try it, I SuperCID mine and it flashes perfectly each and every time.
I'm merely trying to make suggestions that may get a result.
Oh, you didn't tell me what the bootscreen said and what version of Activesync do you have on your PC?
Click to expand...
Click to collapse
I didnt Super CID just followed the instructions in LVSW 's first thread, applied each DL in order and "it just works" (c)

Thanks. That's where i got the infroramtion from b4. I just thought it might be different in the boot screen.
I now did the SuperCID unlocking and did the 3 upgrades again. after the 3rd upgrade i still have:
- WM5.1.342 Build 15096.3.0.0
- ROM 1.23.61.5
- Radio 1.41.00.11
Q again: Do I need to wait after the flashing or do i immidiately press power
(that's what i do when it says finish) or do i soft reset? Or what else?
Thanks for your help.

Hmmmmm just got me phone....... dont ask
Right CE OS 5.2.1413 build 17745.0.2.3
ROM 2.0.1.1
Radio 1.41.00.11
Sooooo.......
a) are you using LVSW (just to be sure)
b) have you grabbed the latest version posted on page 1 of the upgrading thread?
c) I let it restart it self after it finished flashing, it then reclibrates the screen etc etc
Also looks like you havent upgraded anything just yet ... follow the instructions to the letter and it "should" be fine

a) yes
b) yes
c) there might be the problem i waited 2 mins ans as it wasn't rebooting i just used the power button. How long should i wait aftr the WM6 install?

I soft reset mine directly after the screen goes black. So that should be fine.

Maybe it has to do with my boot loader:
When i go to bootloader i see:
IPL-0.50
SPL-1.07.0000
then it starts fading quickly. is this normal? I have the same fading effect when i install ste 2 the radio ROM. but i still have the new radio rom on as it displays as 1.41.00.11
I again tried to use the 2.0.1.1 it uploads very quickly (maybe 2min) and then it's still the "orange" screen and WM5 on reboot and i still have all my data.
What a I doing wrong?

No. Mine stays there right up until the upload to the phone starts.
Then I get a grey background with a blue progress bar.
What happens if you run Enterbootloader on the phone. Then connect it to the PC.
Then run the install program on the PC.
The first process didn't work.
You should have:
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds

Hmmmmm if all else fails try a hard reset on your phone and see what versions of what you have after that.
Did you use ANY form of unlocking prior to using LVSW rom?
/me suspects this might be casuing issues
The radio rom zoooooomed up to my phone and likewise the WM6
I cannt remember reseting the phone after flashing.... IIRC it just worked as in it finished then re-started and way hey off it went.
Also FWIW I just used the DL's in the thread without bothering with anyother boot loaders etc... ie extract flies in first DL into 1 folders, run them, ditto DL's 2 and 3.

Major Help PLease!!

Hi, Am New Here
I just wanna ask something about my O2 xda IIs, i had found out recently that my phone became soo slow.. even my SMS cant even appear.. soo i tried to let my brother fix it..
He tried to fix it with looking for softwares.. he was able to do soo what he call reformting my phone.. but in the end the Phone just stuck up in the Windows Logo.. please help me abou this problem..
My phone Specs
HTC O2 xda IIs
R 1.02.00
G 1337.32
D (i dont know what the version)
Phone Specs After my bro cooked it..
R 1.02.00
G 1337.32
D 5M6.5.1
Can you give me details about installing, upgrading
i think my bro can fix this.. can please give me the details? and softwares needed for my phone to able to operate again
THNX

welcome to the forum!
what your brother did was, flashing another rom. d-two's wm6.5.1 actually.
the fact that the device is stuck in the boot logo now can mean 2 different things, one is good and one is rather bad:
the good one is: he forgot to hard reset the device.
to perform a hard reset please go to -=this site=- and have a look how it's done. after flashing a device, a hard reset is necessary to clean up all the old crap, that is left from the rom before, like the registry and the contents of the storage drive.
the bad on would be: he screwed something up during the flashing
if the first method didn't get you anywhere and you are still stuck in that splash screen, you should look for "stuck in splash screen" or "stuck in bootloader" or "format blueangel mtty"
what that means is: the rom did not flash correctly and with a device with a broken rom, you don't want to start flashing again. so you need mtty to format the device before it should be flashed again.
my personal guess would be no. 1
with best regards
Chef_Tony

Dear Chef_Tony
Thanks for the quick reply.. your correct that the 1st one is only the problem that am not stuck at the bootloader but still... Even though am still stuck at the screen logo after try other roms... can you give me good ROMs that i could use?
I get the ROMs on this thread
http://forum.xda-developers.com/showthread.php?t=428030
i tried those ROMs but still no good i followed the instruction very well.. But still no progress can you still help me ??
By the way whats "mtty" can i use the second method that you give me can you tell me the instruction that i should follow
thnkx and more Power!!

i would, of course, recommed d-two's wm6.5.1 build 23071, which will be released tonight.
if the problem persists with other roms, you are stuck in splash screen and you need to take the mtty method. that is a little complicated, and i have never done it before, therefore, i cannot take responsibility, i just looked for what worked for other people (which is what i meant by search for those terms, it would have lead you to the solution, but here you have your own copy of the solution)
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.

Hspl error check THE picS

HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help

SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
Might have been more help asking in the hspl thread but nevermind . Try a different cable (most mini usb cables will do)

SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
no need to go crazy, this can be fixed.
you shouldn't enter the bootloader yourself, it won't flash that way.
what error did it say in automatic mode?

syrian
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl

SYRIAN4E said:
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl
Click to expand...
Click to collapse
ok did you turn firewall off? turn proxy off too, if you have a proxy.
if that doesn't sort it, I can still help you if you message us via this link: http://support.htc-unlocks.com/

syrian
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend

SYRIAN4E said:
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend
Click to expand...
Click to collapse
you shouldn't enter the bootloader like that, the flash won't work that way.
I replied to your priv. message

syrian
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B

SYRIAN4E said:
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B
Click to expand...
Click to collapse
the screenshots are very helpful in seeing what your problem is.
ok, after 3rd step now try copying Manual SSPL exe (link: http://forum.xda-developers.com/attachment.php?attachmentid=232407&d=1254155476) on the phone, run it, it should then show SSPL screen on the phone. then use the Manual flash mode on the PC. let me know if it works that way

syrian
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture

SYRIAN4E said:
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture
Click to expand...
Click to collapse
what do you see on the phone screen at this point?

syrian
nothing just the file maneger when i launch the manual sspl cuz the device lag

SYRIAN4E said:
nothing just the file maneger when i launch the manual sspl cuz the device lag
Click to expand...
Click to collapse
ok you did step "3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK"
and then you run the manual sspl EXE on the phone, it still lags ?
I'm asking to make sure you did not do a hard reset or anything (I mean, don't do hard reset)

syrian
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use

SYRIAN4E said:
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use
Click to expand...
Click to collapse
ok one last check.. send me a screenshot of your phone showing the IMEI to make sure it's OK.
but do not post the screenshot publicly, send it in private message.

syrian
come on xda help me lol

SYRIAN4E said:
come on xda help me lol
Click to expand...
Click to collapse
alright I realized that the second file was the wrong version. I sent you the correct file in PM, let me know if it worked

syrian
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E

SYRIAN4E said:
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E
Click to expand...
Click to collapse
glad to help. as I said, the manual SSPL in the thread was the wrong version. I forgot to update it at one point, will add it in the thread now. (most people can just go and use automatic mode so nobody noticed there was an issue with the file.)

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4 .49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?