i am trying to go into bootloader for my QTEK 2020i but i think i failed
i am using the combination key D-pad (middle) + power + reset
this gona hard reset and i gona lost my data any help for bootloader menu
thankkkks
i want to backup my data but i lost my data /.....
Related
Hello
today i installed an application from untrusted source and it bricked my HTC touch diamond
it gets stock for 5 mins on the htc logo screen then displays "the device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source, Press SEND to reset your device or press any other button to cancel, this operation will delete all your personal data and restore the device to its factory default settings."
i pressed all the buttons on my diamond but none works.
i would really be grateful if anyone helps me to fix my HTC (without erasing all the data if possible)
thanks for your time
have you tried a hard reset?
I can Hard reset it but is there any other way to fix it without losing the data or any way to copy the data to my PC while the device is bricked?
thanks
If you are able to reset your phone via a hard reset, it is not bricked. Backup people!
back up..........
and back up again
chribruu said:
If you are able to reset your phone via a hard reset, it is not bricked. Backup people!
Click to expand...
Click to collapse
Whats the best way to back up?
Thanks
I'd recommend SKKV tols along with PPC PIM backup (don't forget about your registry.
you can find a lot of freeware backup apps over at freewareppc
Resco Backup is awesome if you don't mind paying a few bucks... How much is your valuable data worth to you?
I fixed my device thanks a lot for your help everyone!
adwinp said:
I'd recommend SKKV tols along with PPC PIM backup (don't forget about your registry.
you can find a lot of freeware backup apps over at freewareppc
Click to expand...
Click to collapse
how can i backup the phone when it cannot estabilish connection with activesynch?
i did some egistry fauts, now the phone boots up, but there is just balck creen ant the start button, the phone button and the batert/network button
when i tpa on start button only appears the progrma section, when i tap on it nothing happens...
the biggest problem that ii cannot make a connection between the pc and the diamond...
what shuold i do to fix the problem?
You can enter the bootloader and connect it via USB there.
Enter + up on volume + stylus should enter a tri-color screen.
intx said:
You can enter the bootloader and connect it via USB there.
Enter + up on volume + stylus should enter a tri-color screen.
Click to expand...
Click to collapse
what is the enter in this case?
soft reset or the power button, or the round button which i use for taking pics?
i got to the bootloader, there is the tricolor/4colour/ screen, red green blue and white,
in the red writes daim100 mfg64m
spl+1.40. Olinex
MicroP-Diam (led) v11
in the green field
fsoc-diam stage_pvt v0x32
blue field is blank
in the white field it writes> usb
but i cannot connect tothe pc, so dont have activesynch and cbbot flash the ppc...
PROBLEM SOLVED
http://forum.xda-developers.com/showthread.php?p=3251939#post3251939 #23
I tried to search so if this is a re post im forreal sorry.. but i dled a CDMA rom and started a bootload .. and now im locked out..
Grey screen .. no button response.. Someone re assure me im not dead in the water.. .
I appreciate it... "Read twice flash once" right.. hopefully my phone will survive the live and learn process with me.
try a hard reset
Hard Reset (This cannot be performed while the device is connected/charging)
With the device turned off, press and hold the TALK/SEND and END/HANG UP buttons, then the press and hold the POWER button until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel."
Release the TALK/SEND, END and POWER buttons.
Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
(procedure found in Wiki)
Tmo or ATT?
both have official roms out, or found in a thread, i would try the correct one for your phone...
best of luck to you... i hope everything turns out ok
Official AT&T HTC Tilt2 Rom
http://forum.xda-developers.com/showthread.php?t=629059
Official T-Mobile TouchPro2
http://forum.xda-developers.com/showthread.php?t=620550
IMEI can also be found behind the battery
Are you able to enter bootloader mode (restart the device when holding down the VOL down button)?
If so - load a GSM ROM to the root of your SD card. and name it RHODIMG.nbh instead of ruu_signed.nbh. Then enter bootloadermode. You will have to press the powerbutton to flash the "update", and then soft reset with your stylus after update (or take out your battery).
Hope it sorts out
Hard reset isn't going to do anything if you've put a GSM ROM on your CDMA phone. You should be able to get into the bootloader though, as Novek has said (try pressing "reset" with the Volume Down button held down), then you can re-flash a CDMA ROM.
I have an old HTC ALPINE ( POCKET PC) A LEF IT FOR A LONG TIME AND TEN I FOUND THAT I FORGOT THE SYSTEM PASSWORD SO I CAN NOT EVEN RESTORE FACTORY SETTING FROM INSIDE AND I TRIED TO PRESS RESET + POWER IT IS ONLY DO RESTARTING AGAIN... WHAT SHALL I DO ....???
hard reset.
hard reset not working
i had tried hard reset ( power + reset ) but it's not working ...
is ther is another way to hard rest it ?
What are the possible resetting?
Soft Reset, hard reset, etc...
And how do I do them?
WIll they harm the OS in anyway?
I want to clean the device after testing it so it will be clean when it is given as a gift.
Put it back in the state as it was (hard reset).
Possible in the menu (Settings/Privacy), or: Take the sim out, and than *2767*3855#
can someone tell me the difference between hard reset and soft reset
various methods by which you can do it
guys can you also tell me in which reset i will get the note as it was out of the box
also please tell me when i do this reset my current stock rom (LB2) will be revereted to kl3 or i will be in lb2
i am noob
thanks
Soft reset is nothing just removing background application/process. As you just reboot your device.
Hard reset, wipe off your data, n will b just as out of box.
you can do with
1. setting - privacy - factory data reset (if you select format USB storage, then only data on USB storage will be wiped, as such no needed)
2.From recovery, Vol up + home + power - select wipe data
Hard reset won't revert back to previous ROM, it will same ROM which is you have right now. To revert back to old ROM, you need PC Odin.
dr ketan
thanks for your answer
one more question will backup with your kies will be sufficient to restore all the data
after hard reset
how to restore all apps
thanks
I have neber used kies for this purpose
you can use My Back up (non rootable version) to backup data.
https://market.android.com/details?id=com.rerware.android.MyBackup&feature=search_result
It will have less set of function for non rooted note.
volume up+home+power button doesnot work why
2.From recovery, Vol up + home + power - select wipe data
after i off my mobile and then i press vol up+home+power button ........a boot screen appears with its model name but doesnot go to that reset mode ......Dr ketan why its not working .....what should i do now
2.3.6 running inside it and it is protected with pin code. a lot of tricks applied but the pin code is not unlock.
forcely factory reset with miracle box tool but not done.
also try to hard reset with keys ( vol up + vol down + home + power) but hang on start up logo.
also flash it but no success...........
it is not going to recovery too............ahhhhhhhhh
any help