I tried to search so if this is a re post im forreal sorry.. but i dled a CDMA rom and started a bootload .. and now im locked out..
Grey screen .. no button response.. Someone re assure me im not dead in the water.. .
I appreciate it... "Read twice flash once" right.. hopefully my phone will survive the live and learn process with me.
try a hard reset
Hard Reset (This cannot be performed while the device is connected/charging)
With the device turned off, press and hold the TALK/SEND and END/HANG UP buttons, then the press and hold the POWER button until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel."
Release the TALK/SEND, END and POWER buttons.
Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
(procedure found in Wiki)
Tmo or ATT?
both have official roms out, or found in a thread, i would try the correct one for your phone...
best of luck to you... i hope everything turns out ok
Official AT&T HTC Tilt2 Rom
http://forum.xda-developers.com/showthread.php?t=629059
Official T-Mobile TouchPro2
http://forum.xda-developers.com/showthread.php?t=620550
IMEI can also be found behind the battery
Are you able to enter bootloader mode (restart the device when holding down the VOL down button)?
If so - load a GSM ROM to the root of your SD card. and name it RHODIMG.nbh instead of ruu_signed.nbh. Then enter bootloadermode. You will have to press the powerbutton to flash the "update", and then soft reset with your stylus after update (or take out your battery).
Hope it sorts out
Hard reset isn't going to do anything if you've put a GSM ROM on your CDMA phone. You should be able to get into the bootloader though, as Novek has said (try pressing "reset" with the Volume Down button held down), then you can re-flash a CDMA ROM.
Related
Hi guise
I have diamond to test it
it hungs on screen (smart mobilty):mad
how can i format it ?
i tried by pres and hold buttons with rest ::
dont the manual spc how a hardreset is performed ?
Rudegar said:
dont the manual spc how a hardreset is performed ?
Click to expand...
Click to collapse
It dose not manual.
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Did it come with a CD? I think there was a copy of the manual for my Touch on the CD that came with it.
rorydaredkign said:
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Click to expand...
Click to collapse
Thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanks
all right
what combination did you do to get to bootloader? just so we all know
im glad to help
Rory
rorydaredkign said:
im glad to help
Rory
Click to expand...
Click to collapse
lol
You should use that as a motto.
go to bootloader is:
hold down button and press (red) reset button
Bingo! This is the same as what the manual said. YJ
Use2Smoke said:
go to bootloader is:
hold down button and press (red) reset button
Click to expand...
Click to collapse
I found that the manual is wrong. The way to perform a hard reset of the Touch Diamond2 is:
1. With the Touch Diamond2 switched off, press the volume up and down buttons simultaneously.
2. Keeping them pressed, use the stylus to briefly press the red soft reset button (you’ll have to remove the back of the Diamond2 to do this).
3. Release the volume buttons when a message flashes up to say, “This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel.”
4. Press the volume up button.
Hi!
I know I am supposed to press volume down and dow a soft-reset but this only boots my phone as normal soft reset. I do not see the tri-band boot screen that people are talking about. I have a Swedish phone ...
http://forum.xda-developers.com/showthread.php?t=402530&highlight=Hard+Reset
No offence mate. Everyone is more than happy to help, but it wouldn't hurt running a simple search first.
All the best.
I know its in order to insult people how do not search , but I was asking for the boot loader - not about Hard Reset
oops..
sorry.. haven't had my coffee yet
go to bootloader is:
Try this
hold down button and press (red) reset button
http://forum.xda-developers.com/showthread.php?t=395795&highlight=bootloader
(again got this from search too.. )
I have tried all of the buttons and no one lets me do a bootloader
Press Volume Down and KEEP it pressed until you get the bootloader screen. So...do not release the volume down after you've pressed the reset buton
That finally did it
thanks!
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
isp_85 said:
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
Click to expand...
Click to collapse
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
agent_47 said:
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
Click to expand...
Click to collapse
Yes, I did it. but no luck!
Any Idea???
try to hard reset first... then try to charge the new ROM.
wazaaappp said:
try to hard reset first... then try to charge the new ROM.
Click to expand...
Click to collapse
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
poetryrocksalot said:
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
Click to expand...
Click to collapse
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
isp_85 said:
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
Click to expand...
Click to collapse
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
wazaaappp said:
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
Click to expand...
Click to collapse
Yes, that's what I exactly did! But the normal windows will come up!
HR through settings
another way to hard reset it to go
start > settings > system tab > clear storage
then press 1234 and press yes
maybe your spl is a bit damaged cause you can't hard reset and you can't flash sspl
try flashing hspl again
to hard reset
switch off
press both silver buttons
just press power button briefly, dont hold power button.
keep pressing both silver buttons till reset screen
hope this helps.
Holy crap you guys I do not know why I triple posted...
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
Click to expand...
Click to collapse
Next time you can call this screen the bootloader screen... don't call it volume down and power button because it is very misleading...
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
human75 said:
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
Click to expand...
Click to collapse
But my silver keys are working in the windows normally
i get to the bootloader screen by pressing the camera- and the powerbutton. maybe that will work for you too?!
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
isp_85 said:
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
Click to expand...
Click to collapse
U need to copy Rom which U want to upgrade to SD card. If u want cooked room so flash Hard-SPL, and then it will automatically install rom U want. or if stock Rom so flash Hard-SPL back to stocks.
hi ...
i have HTC opal and from while i have install a new ROM and it's work ok
then after two week .. my phone does'nt work he hang at boot screen
is there any way to format it with out it working .... please any help .
try a hard rest
Don't worry, your device is not damaged. Follow the guide here to fix your problem:
http://forum.xda-developers.com/showthread.php?t=685025
Note that you'll lose all data on your device when performing this fix. Hope you have a backup at hand!
Essential thing to be known:-
1. Bootloader mode Knowing how to enter into Bootloader mode is one of the most essential thing to be known for a opal user (windows mobile users).
How to enter?
There are two way to enter into bootloader mode.
1. If you device is on, open your device's back cover. Press the soft reset button ( red button ) using stylus. As soon as you press it, immediately press the volume down button and keep holding it until you see a tri-color screen on your device's screen.
2. If your device is off, press the power button as soon as the device vibrates immediately press volume down button and keep holding it until you see a tri-color screen on your device's screen.
Uses?
If you flashed a damaged rom, you would be no longer able to use your device. In that case enter into bootloader mode. And flash a different rom.
Click to expand...
Click to collapse
Good luck..
thnx .... i will try it ....
Just before few minutes i have successfully upgraded my BS. I choose HSPL now my BL is 1.56 Olinex then flashed an blackSTONEhenge™ (WM6.5.3.28238/Manila 2.1) v6.0 rom all the process finished like a charm, now i can't able to Hard reset(Format)
I tried many times by pressing vol up + vol down then then power button at the same time but i cant see any prompt to format, it directly boots up into the os and i checked my volume keys also inside the os both works perfect.
As i used blackSTONEhenge™ there is also no clear storage option under START-SETTINGS-SYSTEM what do i do now?
cell surgeon said:
Just before few minutes i have successfully upgraded my BS. I choose HSPL now my BL is 1.56 Olinex then flashed an blackSTONEhenge™ (WM6.5.3.28238/Manila 2.1) v6.0 rom all the process finished like a charm, now i can't able to Hard reset(Format)
I tried many times by pressing vol up + vol down then then power button at the same time but i cant see any prompt to format, it directly boots up into the os and i checked my volume keys also inside the os both works perfect.
As i used blackSTONEhenge™ there is also no clear storage option under START-SETTINGS-SYSTEM what do i do now?
Click to expand...
Click to collapse
Curious....why do you want to hard reset?
If you press vol up & vol down and continue to hold these and press power on button once you should be presented with a white screen and blue text. Press vol up again to restore manufacturer default, i.e. hard reset
Alternatively try asking within rom thread for where "clear storage" is located. I personally haven't used this rom so cannot comment, but it should be located somewhere on device
Hold Vol Up + Down and press the power button once (do not continue holding the power button). Continue holding vol up + down and it should get u where u want to go. Worked for me.
Fallen Spartan said:
Curious....why do you want to hard reset?
If you press vol up & vol down and continue to hold these and press power on button once you should be presented with a white screen and blue text. Press vol up again to restore manufacturer default, i.e. hard reset
Alternatively try asking within rom thread for where "clear storage" is located. I personally haven't used this rom so cannot comment, but it should be located somewhere on device
Click to expand...
Click to collapse
It was mentioned to format once or twice in the rom thread,
Thanks for your idea it solved my problem i can able to format now, i was such a noob trying holding even the power button instead of pressing it (very shortly) Once, it was not mentioned in any of the thread i googled.
Yes i searched but no 'clear storage' option in this rom must be fixed in feature.
Glad you got this sorted.
MOD EDIT - Thread closed as solution found