Can anyone confirm if you can or cannot CID unlock a Wizard G3 running the IPL/SPL of 2.26?
I've been trying to downgrade my XDA Mini S to a v1.x firmware to CID unlock, I've managed to get the Molinksi ROM running, but I want to try some other ones? All the v1.x ones haven't seemed to work, and left me with just a boot loader. Can anyone help me out?
Cheers!!!
soopahfly said:
Can anyone confirm if you can or cannot CID unlock a Wizard G3 running the IPL/SPL of 2.26?
I've been trying to downgrade my XDA Mini S to a v1.x firmware to CID unlock, I've managed to get the Molinksi ROM running, but I want to try some other ones? All the v1.x ones haven't seemed to work, and left me with just a boot loader. Can anyone help me out?
Cheers!!!
Click to expand...
Click to collapse
SOLUTION FOUND -CID/sim UNLOCKING FOR WIZARD WITH AKU2 ROMS
Disregard the "doesn't work with 2.21" disclaimer as I've used this method on around 10 "out of the box" Cingular 2.25's with no problem. Follow the directions exactly. If the device doesn't reboot when you CID unlock and SIM unlock then you didn't follow procedure. Sometimes one need to reflash the 1.05 a second time after this to get the 1.x IPL and SPL.
You DID say that you have a G3.... If you want a brick do this on a G4!
All hail Faria!
It seems to hang at 98%
As I stated in the other post, the 98-99% portions take much longer than the rest of the flashing process. This can take up to 5 minutes on USB 2.0. If you are using an older computer with USB 1.1, this could take a really really long time. Just leave the phone overnight and see if it completes. Also, try a different computer if you can
I ended up paying IMEI-Check.
Its not that it hung, It crashed out after about 45mins.
Didn't really want to risk a bricked phone. Its all sorted now though!
Is it worth upgrading to a 3.2 Rom?
Related
Just after I got my 8125 I upgraded the ROM to 2.25. I didn't unlock anything. Its running fine. Now I'm interested to try a different ROM. I understand I will need to CID unlock my device. Here is where I'm confused, if it is possible or not after upgrading to 2.25? Can I follow the steps to downgrade my ROM and unlock the CID?
I have searched and been reading alot but I'm still a bit confused, so please be gentle as I ask for some guidance. I have experience modifying Motorola phones, but am new to PocketPC. Any help is appreciated.
Good if you can provide info on how you upgraded your unit (e.g. with the providers official ROM or with the software and ROMS in this forum, etc)
And how you intended to down grade your ROM? You also mentioned the 'steps' to follow, of which steps are you refering to?
And, why do you want to have your phone CID unlocked? CID lock will not bug most people unless they are going for a ROM flashing. CID lock is different from `phone lock` or `SIM lock`.
Just incase you are wonder, what is CID, ... don't ask me. I have no idea at all Seriously.
I upgraded a stock 8125 (G3) to the Cingular 2.25 official ROM. I would like to install a summiter or mr. clean custom ROM. Searching through the messages here I'm unable to determine for certain if I'm able to CID unlock from 2.25 on my own (for free), but I get the impression I cannot. I just want to know for sure before attempting anything further.
I won't need step-by-step instruction...just need to know what my options are at this point.
Last nite I tried to install the summiter ROM without the bootloader. And the install went fine and completed 100% without error. But after the reboot I found the flash didn't hold, it was basically like a hard reset.
First download and install the Cingular 1.8 Rom
If that works fine then you should be able to CID unlock.
If not then try downloading and installing the "Button 1.05" Rom.
If either of these dowgrades worked for you, searck for LokiWiz (use ver 0.2 for CID unlock) and follwo the instructions.
Next if you want to SIM Unlock find LokWiz MSL 0.3 as it does a better SIM unlock than the older LokiWiz. Again follow the instructions.
Now you should be good..
Sorry if I wasn't clear, but its the downgrading I am concerned about. I'm not certain if it is possible to downgrade (including bootloader) from 2.25 without the device being CID unlocked..?
Stinkfist said:
Sorry if I wasn't clear, but its the downgrading I am concerned about. I'm not certain if it is possible to downgrade (including bootloader) from 2.25 without the device being CID unlocked..?
Click to expand...
Click to collapse
Having a G3 device you can downgrade.
You must downgrade to CID unlock unless you want to pay imei-check $40.00
kyphur said:
Having a G3 device you can downgrade.
Click to expand...
Click to collapse
Perfect...I will try it.
You must downgrade to CID unlock unless you want to pay imei-check $40.00
Click to expand...
Click to collapse
Yeah, that much I do understand. I definately want to avoid paying to unlock.
Thanks for your help! I'll let you know how it goes.
Success! SIM/CID unlocked.
IPL 2.24
SPL 2.24
GSM 02.25.11
OS 2.24.10.1
Thanks kyphur, for taking a moment to point a noob down the right path.
I'm at wits end and have been trying to do this for weeks straight. It's driving me nuts. First, I read ALL 36 pages of the thread The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards (http://forum.xda-developers.com/showthread.php?t=285435) and all of thread SOLUTION FOUND -CID/sim UNLOCKING FOR WIZARD WITH AKU2 ROMS (http://forum.xda-developers.com/showthread.php?t=263116). Both refer to downgrading to (ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe). It always freezes at 98%. I tried different computers, cleared my Temp files, rebooted the phone and PC.. I tried all this over a dozen time and had to revert back to the factory ROM a dozen times. I even tried xelencin's ROM (T-Mobile_RUU_Wizard_2261020_226_22511_ENG_US.exe) which has a built in CID unlocker and it froze at 98% too!! It didn't unlock my CID either. It's working for everyone else who has Cingular or Tmobile phones, but I think since mine is directly from the factory, it's different. Is there any other ROM I can downgrade to 1.X or a way to CID unlock with my 2.17 (G3 phone). At this point I'm wore out of ideas and will try anything. I would greatly appreciate any help and experiences.
All flashing stalls for a while in different parts of the process showing the red bar in your phone (even @100% in the progress bar), how long have you left the phone in "freezing" status? May be you aren´t giving it enough time...?
try a different computer if its possible, i tried downgrading to button's rom like 10 times on my dell 700m and it got stuck @ 98% everytime, then i went to my desktop and it worked on the first try. best of luck
try searching 98% in the forums' i think other people had the same problem when i searched it months ago
To Unlock 2.xx you can use lokiwiz03
If your looking to CID unlock I believe lokiwiz03 will do the job. But if your on 1.xx IPL/SPL then you can use lokiwiz02.
MGF
I had the same pbl as you your phone is CID locked. to solve it I have uncid my phone by using this toll first:
hard_SPL-G4.exe
you will find it here:
http://forum.xda-developers.com/showthread.php?t=329147
then I have used the toll lokiwiz02b and choosed the option CID unlock.
After that I have try all of the WM6 ROM and it had worked with 100% of them.
Let me know if it have worked for you.
Have Fun
Dcapolungo said:
I had the same pbl as you your phone is CID locked. to solve it I have uncid my phone by using this toll first:
hard_SPL-G4.exe
you will find it here:
http://forum.xda-developers.com/showthread.php?t=329147
then I have used the toll lokiwiz02b and choosed the option CID unlock.
After that I have try all of the WM6 ROM and it had worked with 100% of them.
Let me know if it have worked for you.
Have Fun
Click to expand...
Click to collapse
Let me correct you here,your phone is semi CID unlocked due to 'HardSPL',it's not permanently CID unlocked or get it unlocked by lokiwiz02b,it didn't do anything,who gave you this impression,that you can CID unlock a G4 device with lokiwiz02b and that to after performing 'HardSPL'.you are upgrading to all wm6 latest custom built Roms,cuz your phone is HardSPL and all the new Roms do not include IPL/SPL in them,but never try to flash a rom with IPL/SPL in it,you'll "Brick" your phone,ok,even if you try to flash the official carrier's Rom,which includes IPL/SPL in it,will brick it,until and unless you remove the 'HardSPL' from your phone.
A permanently CID unlocked by lokiwiz02b can only happen with a G3 device and it can be flashed with any rom,even if it contains ipl/spl.
SO, don't post a wrong advise to guys,like this.
Cheers !!!
Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
sdl said:
Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
Click to expand...
Click to collapse
Are you sure you have a G4 ?
No, I have a G3. But according to "How to flash a new ROM to your Wizard... a little tutorial!" http://forum.xda-developers.com/showthread.php?t=298613, if I have an IPL/SPL of 2.xx, I need the wizard_love rom. Read last sentence of G.2.
I used the button ROM. It brought my IPL down to 1.01, but my SPL is still 2.25. Is that OK to proceed?
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
xeno1 said:
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
Click to expand...
Click to collapse
After at least 15 flashes with button, still no luck. I started with Cingular 2.25.
The button I am using is CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.
My IPL is down to 1.01, but my SPL is still 2.25. How in the world do I get passed this?
It really sucks when you can't get past the first step .
P.S. Should the SIM be in the unit during the flash? I've tried it both ways.
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
xeno1 said:
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
Click to expand...
Click to collapse
Tried it several times. No luck, SPL still stuck at 2.25, but thanks for the help. Anyone else out there with this problem?
That's weird, usually it happens the other way around and people get their IPL stuck at 1.xx when they try to upgrade back to a 2.xx but the SPL upgrades without a problem. Since you already have the button ROM on there, go ahead and try and see if it will CID unlock for you. Run lokiwiz and see if it gives you any errors and if not, download and install Wizard Service Tools on to your computer and then run it and click the CID actions button to see if it tells you that your CID is unlocked. If it does then your safe to start upgrading. For some reason I have a feeling it might just work for you.
same here, got the cingular 8125 and flashed the rom. I can not get the spl down. I have 2.25 as well. ahhh what other rom should be good for a cid unlock
also i am on activesync as "guest" dont know if this matters
ctheodores said:
also i am on activesync as "guest" dont know if this matters
Click to expand...
Click to collapse
That doesn't matter.
Try flashing Tmobile 2.26 then again the 1.05 Button ROM
From what i know the Wizard Love is only for G4 Users. G3 users should flash Tmobile stoc 2.26
not all g3 are the same!!
i have experienced the same with my g3 (IPL/SPL 2.18) when i tryed to downgrade the spl... ipl 1.05 and spl 2.18 still remain... just try to unlock spl with lokiwiz02b and relax... i tried to install tnt 5.0 23 times before i unlocked the spl... just read and apply this : http://forum.xda-developers.com/showthread.php?t=285435
i downgraded and reupgraded my spl locked g3 (qtek 9100) in 45 minutes at the state of art...
-----------------------------------------------
tnx to all people that try and try and try and teach us with his experience...
I have found that the SPL doesn't matter. Go ahead and run lokiwiz and you will be ok.
yeah i got throught just run lokiwiz02b cid unlock and then update to tmo rom
ipl spl 3.08; RUU at 100%, but Wizard stays at the same rom. Why ?
Thanks.
moteur said:
ipl spl 3.08; RUU at 100%, but Wizard stays at the same rom. Why ?
Thanks.
Click to expand...
Click to collapse
The reason is dear that you did not CID unlocked your phone and upgraded to ipl/spl 3.08.You didn't follow the guide correctly.
Rules of the forum are to read,read and read fully to understand and only than go for the upgrade,lol
Anyway if it's a G3,which I'm sure it is,otherwise if it happen to be a G4,man you had it,it wud had been an expensive piece of paper weight on your desk, and loading the same previous,read the guide and try to downgrade to ipl/spl 1.xx,than correctly follow the unlocking guide,ok
good luck
Please read and follow the [Definitive guide] clicking here.
You don't have to be CID unlocked to flash the 3.08 IPL/SPL. If you're not though I would suggest holding off on it until you do because of the serious problems people have been encountering when trying to go back down to a 1.xx IPL/SPL. It could cause you to never be able to CID unlock.
YES!
Of course,it's not necessary to CID unlock for upgrade to 3.08,cuz it's just an upgrade to latest Bootloaders,IPL/SPL 3.08 and keep using the current official Carrier's Rom and pray that your carrier might someday provides with a wm6 oggicial upgrade...But if you are looking to upgrade to a newer wm6 custom build Rom,well,it's recommended and wise to unlock first and than upgrade to ipl/spl 3.08,cuz unlocking is only possible in ipl/spl 1.xx and after upgrade to 3.08,BAh!!,and downgrading to 1.xx for unlocking...... it's where things start getting rotten and it becomes a pain in the neck.
moteur
So, I must say you missed the bus of an easy option to unlock,I still don't say that it can't be done,it's very much possible,only now it wud take some efforts to get down to 1.xx,anyway,when there's a will,there's a way,lol,or take xeno1's advise and stick to what it's worth for,good luck
format is failed after a power outage in the middle of ugrading with shell tool.
made it worse bu trying to flash with tmobiles latest rom.
so now i'm stuck in boot screen with the following
Device is g3 with
IPL 3.08
SPL 3:08
GSM 02.69.11
OS 3.8.2.1
did i mention CID unlocked?
please advice
rephrase
Let me rephrase the question.
I have a friend who saw me use shell tool to upgrade my cid locked wizard.
He went home to try the same on his cid locked g3 wizard.
he had bad luck and it was interrupted mid way through so he brought me his dead wizard.(stuck on bootloader)
The only official rom i had was Tmobile's 3.08 so i flashed it to try and revive it.
it flashed and finished but still stuck on bootloader.
when i try and hard reset it says "format is failed".
button rom wont work, wizard love wont work, sd method wont work as it is cid locked.
Any ideas?
And if none, will imei-check work..
Get the official stock ROM for his Wizard, then flash it and you will get a working Wizard back.
However, if the IPL and SPL still stays at 3.08, there is possibility that IPL and SPL not downgradeable, so unlocking may not be possible.
Another thing...by CID unlocking the Wizard, there is no reason to use ShellTool while you can actually use RUU directly! Using ShellTool may lead to incomplete update!
Not yet home
Hey, the stock rom (tmobile 3.08) succesfully flashes but the wizard still doesnt boot. it gets stuck on the first screen.
Any more ideas?
BTW i'm very experimental so i'll try anything..
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
pd2903 said:
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
Click to expand...
Click to collapse
Both solutions advised require WinCE to boot to be applied... which isn't the case here
hey
mestrini said:
Both solutions advised require WinCE to boot to be applied... which isn't the case here
Click to expand...
Click to collapse
So mestrini,
What to do??
will imei-check work?
And what exactly is format is failed?
Try this thread http://forum.xda-developers.com/showthread.php?t=298613
This worked for a friend of mine. he has a G3.
Peter