Related
i have new kjam and i do upgrade to mr cleen rom when it finished to update its works fine until i was turned off him....
he doesnt turn on anymore!!!!
either there is no a sign from any light that it chargable...
hard reset doesnt help too..
what to do????????
Let's try the obvious and easiest first, charge the handset using the wall plug charger. I had mine discharge and thought I'd bricked it because it wouldn't do anything either not even charge from the USB port. After letting it charge from the wall, it worked fine. Good luck, I don't think you did anything that can't be undone.
hello,
When wizard is completly discharged the only way to wake up it is to charge with sector adapter.
tomeror said:
i have new kjam and i do upgrade to mr cleen rom when it finished to update its works fine until i was turned off him....
he doesnt turn on anymore!!!!
either there is no a sign from any light that it chargable...
hard reset doesnt help too..
what to do????????
Click to expand...
Click to collapse
Another dumb case of flashinf before reading!
You flashed your G4 Wizard with a G3 Rom, during the flash your bootloader (IPL/SPL) was overwritten, conclusion, your Wizard is bricked (for life!).
Regards,
Molski
flashed charmer with wizard...an now its totally dead...cant enter boot....anyone can help...
dead - can you describe it better? is it freezing in the splashscreen? or not powering on completely? have you tried to charge it using normal charger, not usb sync cable?
what about bootloader, dead too? try to hold camera button and press reset. if three color bars appears, you have a reason to stay calm.
nocturne.op.15 said:
dead - can you describe it better? is it freezing in the splashscreen? or not powering on completely? have you tried to charge it using normal charger, not usb sync cable?
what about bootloader, dead too? try to hold camera button and press reset. if three color bars appears, you have a reason to stay calm.
Click to expand...
Click to collapse
complitely dead...not powering...cant enter boot...
hmm, it looks bad. I don't have any valuable ideas...but:
maybe you may try to charge battery in another charmer. When I bought my one, directly after unpacking the box, it wasnť able to start. I was angry, but then ve have tried to charge the battery in my friend's charmer and it worked (the battery was not completely discharged, but maybe some electronics inside was somehow blocked)
otherwise, you can try to diagnose electric circuits inside - but do it carefully, you may easily damage it!
speaker charmer
it has production defect. the HTC has knowledge of this... and is about one reparation in warranty. [[]]
nocturne.op.15 said:
dead - can you describe it better? is it freezing in the splashscreen? or not powering on completely? have you tried to charge it using normal charger, not usb sync cable?
what about bootloader, dead too? try to hold camera button and press reset. if three color bars appears, you have a reason to stay calm.
Click to expand...
Click to collapse
I have a problem with my mda compact II and it was almost like describe.
after i tried to upgrade my pda, the update went to the end and finished successfully, the pda doesn't turn on, it shows the t-mobile image and then goes off, if i press camera button and turn on button i can see the tree colors, but what should i do now?
help me please.
use official t-mobile rom (in t mobile official page, difficult to find, get the link from the XDA-Wiki).
1. put your charmer into the 3 colour screen mode
2. kill your activesync in your PC (or just disable USB link)
3. run the EXE of the offical ROM
Do it before your battery went dead.
hanmin said:
use official t-mobile rom (in t mobile official page, difficult to find, get the link from the XDA-Wiki).
1. put your charmer into the 3 colour screen mode
2. kill your activesync in your PC (or just disable USB link)
3. run the EXE of the offical ROM
Do it before your battery went dead.
Click to expand...
Click to collapse
But my pda just shows for 3 seconds the 3 color screen, perhaps my batery went down..
i was trying to update from a t mobile update...
dammm
how can i try to put original again if i can him on?
regards
if i conect with the power cable i can go to the 3 color screen, but how can i put the original rom?
the mda must be syncronize with activesync? if i take off power cable e shut down, with the power cable on, if i try a normal start is allways restarting...
ideas?
After9 said:
if i conect with the power cable i can go to the 3 color screen, but how can i put the original rom?
the mda must be syncronize with activesync? if i take off power cable e shut down, with the power cable on, if i try a normal start is allways restarting...
ideas?
Click to expand...
Click to collapse
try leaving it off with the battery in and plugged in for about an hour to see if you can get a charge, otherwise use another battery that is fully charged. Only other way is to use a SD backup which you can then install with the power cable plugged in.
also you do not need an activesync link to install ruu rom packages. also long as your in bootloader with usb showing in the corner, the ruu will be able to find it.
dave106 said:
try leaving it off with the battery in and plugged in for about an hour to see if you can get a charge, otherwise use another battery that is fully charged. Only other way is to use a SD backup which you can then install with the power cable plugged in.
also you do not need an activesync link to install ruu rom packages. also long as your in bootloader with usb showing in the corner, the ruu will be able to find it.
Click to expand...
Click to collapse
i'm using another charge battery 100% but in the 3 color screen is allways rebooting, so i can connect the usb cable.
i just can see the 3 color stable with the power cable.
Can i connect directly to pins where battery connects?
can i install in bootloader from sd card?
well, now i can turn on the bootloader but when i'm trying to install the rom from t-mobile gives me some errors in the nk.nbf...
what should i do?
it stays on 1% and give me error 326 invalid command...
Help Please
nocturne.op.15 said:
dead - can you describe it better? is it freezing in the splashscreen? or not powering on completely? have you tried to charge it using normal charger, not usb sync cable?
what about bootloader, dead too? try to hold camera button and press reset. if three color bars appears, you have a reason to stay calm.
Click to expand...
Click to collapse
I Have the problem whit de boot, is stay in tree color.
I have do the hard reset and the soft reset and donth work.
canth you help.
I have the cingular 8125
claroscuro: First of all, this is not 8125. Second of all, just flash an official rom while in bootloader mode.
RUU via SD card + only power cable plugged in
[. Only other way is to use a SD backup which you can then install with the power cable plugged in.
[/QUOTE]
i have similar problem how can u use SD RUU when power cable is attached and mda compact 2 is in 3 coloured bootable screen.
i have a fully cahrged batter but mda is not detecting battery, mda only start+ bootable mode when power cable is plugged in( battery is 100% charger in another MDA but MDA is not recognising battery.
PLZ help
You can buy an adapter for charmer in which you can insert USB cable, power cord and headphones jack.
can you please recommend what it is called as search for MDA COMPACT 2 USB cable, power cord and headphones jack on ebay doesnot come up with any thing.
Cheers
http://cgi.ebay.co.uk/MDA-Compact-I...6191840QQihZ018QQcategoryZ56166QQcmdZViewItem
do u mean this item, i am not sure from description if it can sync using a usb cable at the same time being charged by main power source.
Have the same problem
HI, I have the same problem, and even with the battery been on charge for a full day, as soon as a try the updates it comes back saying there is under 50% charge. When I try in the sync holder with power as soon as the USB is connected it powers off.
Did you find a answer to the problem ?
Cheers
TBW
this is nothing , my friend , MY BATTERY DOES NOT EVEN CHARGE AT ALL
IT IS NOTE DETECTED AT ALL.
i have tried fooling the device by using the cradle with power supply and usb connected with pc but it neither cahrges the device nor it is deted=cted by the pc.
I was trying to update my WM5 to WM6 I have the G4 8125 , now it wont turn on I plugged it in to the charger port and the light that shows it's charging doesn’t even come on. Last night after I was trying to update it went completely blank, I tried to run the Official AT&T RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 and it wont even connect to my phone it gives me the connect error, every now and then last night it would show the boot loader screen but now its doing nothing someone HELP ME!!!!!!!!!!!! PLZZZ Does this mean my phone is bricked ???
Sounds like the battery is dead at a guess. As you have already seen the bootloader screen that is a good sign. You need to charge the battery away from the phone either in a cradle battery charger or another persons phone. If after charging the battery the phone is still dead I am afraid it maybe RIP.
I am sure others may help you far better than me though
Shew , i hope it is just the battery if its not the battery is thier anything else i can do for the phone ?
I am now in the same boat with my K JAM
What was you trying to do to your phone ? the same thing i was ?
emmanuel_harris32 said:
What was you trying to do to your phone ? the same thing i was ?
Click to expand...
Click to collapse
Basically but I have left the battery out for 30 mins and it has restarted
You can buy A charger which will charge the battery out of the phone on E bay
emmanuel_harris32 said:
I was trying to update my WM5 to WM6 I have the G4 8125 , now it wont turn on I plugged it in to the charger port and the light that shows it's charging doesn’t even come on. Last night after I was trying to update it went completely blank, I tried to run the Official AT&T RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 and it wont even connect to my phone it gives me the connect error, every now and then last night it would show the boot loader screen but now its doing nothing someone HELP ME!!!!!!!!!!!! PLZZZ Does this mean my phone is bricked ???
Click to expand...
Click to collapse
Most important is to get your battery fully charged atleast, I think it has gone flat,how are you trying to charge the battery ?,it won't get charged through usb cable, cuz usb cable will not charge in bootloaders,it got have a working OS on the phone and only provides 0.5 amp(500 amp power),where as now it'll only start charging if you connect it to a 'Wall Charger' which provides 1 Amp (1000 Amp power), or get a charged battery from a friend and check if your phone gets into bootloaders,if it gets than my friend your saved.WELL,IF NOT,.....I'm afraid you gotta shinny expensive paper weight on ya desk.
which Upgrade Rom were you trying to flash and as you have a G4 device,what method did you adopt to flash the Rom ? a G4 device can only be upgraded through SoftSPL or HardSPL method in case upgrading to a custom build wm6 Rom and or can only be flashed with an official Rom.
Secondly ,if you flashed a G3 specific Rom which includes IPL/SPL in it,will definitely "BRICK" the phone
I just wanted to thank everyone for your help , i got my new battery in yesterday and my phone booted up flashed back to at&t orginal rom. Thank So Much.....
I was flashing my phone repeatedly last night. I've read the forums and have done about 4 successful flashes already. The problem is, I've found a WM6 rom for the Wizard that I wanted better than the ROM already inside my phone, and I proceeded to flash it. But I left the computer and phone by itself so that I could rest a bit (I've spent hours in front of the computer flashing my phone), and fell asleep. When I woke up, I noticed that the flashing failed, and it was at the tri-color screen. Then, it died on me. No battery, obviously, being stuck at the tri-color screen the whole night. Now, it doesn't charge or turn on. I know I just need a battery to run the phone. But where I'm from, batteries for the Cingular 8125 are rare, and I'm one of the few that has an 8125.
I don't know anyone who has a battery for the 8125, and there's nowhere to buy from here. Any recommendations?
First of all be sure that you haven't flashed a G4 ROM in a G3 device (or vice-versa) which would have made it a brick.
In case you haven't screwed up the bootloaders then look for the battery jump start thread that teaches how to revive a dead battery
good luck
ianestradalives said:
I was flashing my phone repeatedly last night. I've read the forums and have done about 4 successful flashes already. The problem is, I've found a WM6 rom for the Wizard that I wanted better than the ROM already inside my phone, and I proceeded to flash it. But I left the computer and phone by itself so that I could rest a bit (I've spent hours in front of the computer flashing my phone), and fell asleep. When I woke up, I noticed that the flashing failed, and it was at the tri-color screen. Then, it died on me. No battery, obviously, being stuck at the tri-color screen the whole night. Now, it doesn't charge or turn on. I know I just need a battery to run the phone. But where I'm from, batteries for the Cingular 8125 are rare, and I'm one of the few that has an 8125.
I don't know anyone who has a battery for the 8125, and there's nowhere to buy from here. Any recommendations?
Click to expand...
Click to collapse
First os all your Wizard is not a brick. To revive your battery try using a wall charger to charge you battery, or you can leave it attahed to a wall charger for some time and it should start charging after 10-15 mins (becoz one i got a dead battery and did the same) Once the battery is revived then flash it to a Official ROM, afterwards any custom ROMs or what so ever. I hope i helped. TC
i've the same problem!!! i leave the phone attached the whole night to the charger...but it was in bootmode, so it doesn't charge!!! it hasn't the power to flash my phone...when it arrives to the 85% (when the phone write into the flash memory) it reboots.....what must i do? i tried to jump start...with a 12v adapter...but nothing....
It won't charge in Bootloaders,as it doesn't provide any charging circuit .The phone must have and boot up to a working OS (Windows) to start charging,only then it has a charging circuit.
Try to get a fully charged batter ,may be borrow it from a friend or try to charge your battery with friends phone,flash a rom and only it'll start to charge.
i know....but...i have not a friend with a ppc like mine!!!! and even if i'll buy a new battery....how can i charge it????? a friend of mine has a qtek 9000....but the battery is different from mine.......
F0ll3 said:
i know....but...i have not a friend with a ppc like mine!!!! and even if i'll buy a new battery....how can i charge it????? a friend of mine has a qtek 9000....but the battery is different from mine.......
Click to expand...
Click to collapse
No need to buy a battery i say you use a External Battery Charger. Because even buying it would be cheaper then the battery itself and would help you in future too. I hope i helped. TC
Thanks
xda2_haseeb said:
First os all your Wizard is not a brick. To revive your battery try using a wall charger to charge you battery, or you can leave it attahed to a wall charger for some time and it should start charging after 10-15 mins (becoz one i got a dead battery and did the same) Once the battery is revived then flash it to a Official ROM, afterwards any custom ROMs or what so ever. I hope i helped. TC
Click to expand...
Click to collapse
Thanks, dude. I never even tried charging it with the wall charger. There seems to be other people that have the same problem as I do. Now my phone is up at the tri-color screen, and I'm charging it, then Ill start flashing again. Thanks again!
No Problem but now remember if you find ppl with same problem (on the forum) dont forget to guide them to this Thread. And no need for the thanks. TC
zabardast_1 said:
It won't charge in Bootloaders,as it doesn't provide any charging circuit .The phone must have and boot up to a working OS (Windows) to start charging,only then it has a charging circuit.
Try to get a fully charged batter ,may be borrow it from a friend or try to charge your battery with friends phone,flash a rom and only it'll start to charge.
Click to expand...
Click to collapse
Thanks, dude. I never even tried charging it with the wall charger. There seems to be other people that have the same problem as I do. Now my phone is up at the tri-color screen, and I'm charging it, then Ill start flashing again. Thanks again!
Click to expand...
Click to collapse
@ianestradalives's as zabardast_1's has said, your phone WILL NOT CHARGE unless windows Boots. Either buy a new battery or find someone with the same phone or an Orbit(as they use the same battery) also if you buy a new battery it generally arrives with enough charge to use for flashing(It did for me anyway). The only other way to do it would be to buy a dock with a second battery charging slot. Using the wall charger wont do anything except stop it from restarting ,while its plugged in.
@XDA2_haseeb why point people who have the same problem to this thread, if the answer you have given is incorrect?
scousemartin said:
@ianestradalives's as zabardast_1's has said, your phone WILL NOT CHARGE unless windows Boots. Either buy a new battery or find someone with the same phone or an Orbit(as they use the same battery) also if you buy a new battery it generally arrives with enough charge to use for flashing(It did for me anyway). The only other way to do it would be to buy a dock with a second battery charging slot. Using the wall charger wont do anything except stop it from restarting ,while its plugged in.
@XDA2_haseeb why point people who have the same problem to this thread, if the answer you have given is incorrect?
Click to expand...
Click to collapse
Dude, sorry to disappoint you, but his advice was correct. My phone is now up and running, and it has NBD 9.2. The advice he has given is correct. It works.
Ok,was your phone in Bootloaders (muliticolor screen) or with a working OS installed on it when you charged with a wall charger ?
That's exactly what was i was about to ask Zabardast_1
As there is no way he could charge his phone while it is in bootloader mode. He either had battery power already in it and messed up the flash or you have just been lucky when you took the battery out of the unit and reinserted it and there was enough power left to flash
zabardast_1 said:
Ok,was your phone in Bootloaders (muliticolor screen) or with a working OS installed on it when you charged with a wall charger ?
Click to expand...
Click to collapse
In bootloader screen. If you were flashing a rom and it failed, you usually end up in the tri-color (aka "Bootloader") screen. Do what haseeb said (like I did) and plug your wizard to a wall charger and wait for a few minutes. When I plugged mine, it immediately lit up. Good hunting!
scousemartin said:
That's exactly what was i was about to ask Zabardast_1
As there is no way he could charge his phone while it is in bootloader mode. He either had battery power already in it and messed up the flash or you have just been lucky when you took the battery out of the unit and reinserted it and there was enough power left to flash
Click to expand...
Click to collapse
Nope. I'm sure the battery was drained. The other night, my phone was in the bootloader screen THE WHOLE NIGHT. And yesterday, I tried reflashing, but it won't start anymore because of - obviously - no battery power.
IF you don't believe me, fail a flash and drain the battery. Then plug it into the wall. It really works.
scousemartin
YUP! thats very true.
The question here is 'How did he charge in Bootloaders with a wall charger',it has to have a working OS on it to start the charging circuit,which isn't present while in Bootloaders.
Flashing is a separate issue.
it will light up as it has power but it WONT CHARGE IT. You were LUCKY that's all and you had power in your battery. You just never realised it. If you want to prove us wrong let the battery go low and then try your revival attempt again. I guarantee you will be buying another battery or charging it somewhere else
also i have been through this personally with my xda mini-s and the only remedy was to buy another battery (or recharge it). You could leave your phone connected to the wall charger for a week and it wont make a blind bit of difference to the battery level. I know because i tried.
Anyway glad you got it sorted ,but the solution to your problem was not charging the phone. Thats all i have to say on this matter now
scousemartin said:
also i have been through this personally with my xda mini-s and the only remedy was to buy another battery (or recharge it). You could leave your phone connected to the wall charger for a week and it wont make a blind bit of difference to the battery level. I know because i tried.
Anyway glad you got it sorted ,but the solution to your problem was not charging the phone. Thats all i have to say on this matter now
Click to expand...
Click to collapse
It did get sorted. But I am really sure about the battery thing. I guess this is an anomaly. Besides, the XDA is different from a Wizard.
lol the xda mini-s is exactly the same device a 8125 is, they re both wizards
I didn't flash my phone. At first it wasn't charging, now when I power it on i get the red, green, blue, white striped screen and it says serial at the bottom. Oh yeah, and it still isn't charging.
Try these links for help
Try these links for help:
http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
There is detailed info on how to fix this. FYI--it is always very helpful if you post the information you see on that screen, which is the boot loader screen. Is the device hard spl? What does the screen say?
sorry about that. the phone is completely dead now. My phone was never flashed, so it is running the default software.
Did you try charging your phone with the WALL CHARGER rather than USB TO PC ???
Was it a PRE-OWNED DEVCIE or BOUGHT UNLOCKED ON EBAY?
Try to get your battery charged first, troubleshooting does not make sense otherwise!
It is brand new, got it after my other tilt fell out of my window (don't ask). Is there anyway to charge the battery without the phone?
before the phone got stuck on the bootloader screen, it wouldn't charge the battery, eventhough when i went into the power settings it clearly said that the phone was charging
Did you get it from AT&T? If it is brand new, get a warranty exchange. It should work right out of the box.
I didn't just get the phone. I've had it for easily 4months now. Anyway to charge the battery without the phone?>
bookechu said:
I didn't just get the phone. I've had it for easily 4months now. Anyway to charge the battery without the phone?>
Click to expand...
Click to collapse
The obvious answer is that it is a defective battery, you need to try the phone with a new battery first.
Any re-flashing of roms to get out of bootloader must be done on a full charge.
I have never come across a stand alone battery charger.
Some cradles come with battery bays
bookechu said:
I didn't just get the phone. I've had it for easily 4months now. Anyway to charge the battery without the phone?>
Click to expand...
Click to collapse
There are cradles out there for the TyTN II which have a bay for charging the spare battery and they come with a power adapter - I know because I have one and it works well. Just google for TyTN II cradle. Mine was very cheap here in the UK and came with a spare battery as well (always usefull for a TyTN II owner).
Rather than jumping into automatic reflashing mode, once you've got a fully charged battery in it, try a hard reset using the stylus and buttons (as per the wiki here) first and let us know how you get on with that.
ok, i got my friends battery. tried hard reset, still getting the tri colored screen. screen has ruunbh in top right corner.
under that to the left is:
kais1*0
spl-3.02.0000
cpld-8
_ it also changes from serial to usb at the bottom as i plug and unplug the usb cable
Phone is working. just need a batter 50% full and reflashed it. thanks for the help guys.
Fxxking phone still will not charge.
bookechu said:
Fxxking phone still will not charge.
Click to expand...
Click to collapse
Just but a cradle with a bay to charge a spare battery. Also, if you are charging via a wall charger, try using a USB to PC connection and see if its charging that way. It could just be a bad power supply. Try your friends charger. Im sure he will let ya borrow it for an hour or so.
Also, check to make sure you didnt somehow goof up the pins on your USB port on the phone. Many people here have made the mistake of putting the stylus in the wrong hole in the dark....maybe its possible you did the same ? If so it could be as simple as taking a safety pin or something and putting the pin back where it belongs.
Goodluck!
Ok!!!! Phone is back to the tri-colored screen and now my computer won't recognized the phone. But as i enter and remove the usb cable, it still switches from serial to usb.
bookechu said:
Ok!!!! Phone is back to the tri-colored screen and now my computer won't recognized the phone. But as i enter and remove the usb cable, it still switches from serial to usb.
Click to expand...
Click to collapse
Generally that means that you should be able to download a rom/radio combo and run the KaiserRUU. Go to HTC's website and download a new OS load for the tilt. Should fix ya up
how would this work if the computer doesn't recognize my phone?
Base drivers should be installed already on your computer ( activesync) . The RUU knows which com port to install through once USB is showing on the tilt...........
RUU = rom, right?
i keep getting connection error