Related
Hi
Am newbie to the whole XDA thing (am just converting from BB), have managed to unlock my XDA Mini S and tried running K-JAM_WWE_216901_2169101_020721_ship.exe as i heard this would reflash the ROM to the latest (a friend of mine gave me this copy).
Got an error during this, and wondered if there was a specific XDA Mini S version (have searched on the site and it appears that there is on ftp://ftp.xda-developers.com/Wizard) and there are many different ROMS under the ROM directory, but i am unable to login to this site.
Am i just being thick here.
Any help gretaly appreciated.
That ROM upgrade worked ok on my xda-mini-s
When I upgraded my ROM I done the following.....
#unlock phone
with no SIM card in phone
copy EnableRapi.cab to phone
run EnableRapi.cab from phone
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
run lokiwiz.bat from PC
select option 'C' unlock CID
phone reboots
add CID to backout bin file names on PC
#install new ROM
uncomress ROM file from zip
click ROM install file
follow instruction
takes 10 minutes
phone reboots
Hope this helps
Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben
Dudes - I've done the same upgrade to my mini S. Not sure if it's worth the bother. No difference in speed/performance and my keyboard shifted symbols (@?£$) are out of sync. I think I'll go back to the Mini S rom without the customised stuff.
LLcoolJ:
I noticed lots of difference, speed and battery life.
To get the keyboard from US to UK symbols use the following:
Here are the registry changes ....
Keyboard language
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
0409 English US
0407 German
0419 Russian
040C French
0410 Italian
040A Spanish
benih007 said:
Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben
Click to expand...
Click to collapse
The invalid vendor ID is the result of the ROM update..... to get rid of it make sure you run :
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
A soft reboot is when you hit the reset button on the right hand side, its like rebooting a PC. A hard reset however is a re-install boot where you loose everything and the ROM is re-installed.
Cheers Bilbo - I've made the changes to the registry and the keyboard talks like me. Your right about battery power as well.
Bilbo.
Thank you for replying and helping.
Let me just go over what you said...
first I ran the loki cab file on the mini S.
run lokiwiz.bat from PC -- done.
select option 'U' Unlock SIM -- done (with sim card removed)
phone reboots -- not automatically though, but I will reboot it after the lokiwiz.bat finishes
add SIM to backout bin file names on PC -- what does this mean? this is not in the lokiwiz instructions and this is where i'm going wrong. Where is the bin file created btw, I can never find it?
I have tried so many combinations i'm starting to lose hope.
If you can help to get this damn thing working I promise to make a donation to this web site.
Thanks for all the good work.
Ben
i managed to get the unlock, but did not do the CID (so will try that).
So once i have done that will the K-JAM_WWE_216901_2169101_020721_ship.exe upgrade work?
Here's how I got mine working. - Remove the Sim card. Make sure you use Lockwiz02b. Select U to unlock from the options menu. The mini S should reboot automatically. Leave the device alone until its functional again and then start Lockwiz02b again. Select C (CID unlock) from the menu. It should reboot again and close down the Lockwiz box. The mini S should now be ready for a rom upgrade. On my first attempt I used the original Lockwiz prog which caused problems for me.
I'm about to do my rom update on my mini s....but this thread is so confusing!
Is there a step by step guide somewhere on the forum???
ROM Upgrade
Upgraded O2 XDA mini without any real problems:
I used the aWizard 1.3 Beta 2 tool which allowed me to carry out the CID Unlock and was pretty easy to understand. What it did not do was pick up the ROM from the rom folder but once I had completed the CID unlock I ran the rom normally and all was well.
So in essence: Connect Mini to PC via Activesync
Run the aWizard Bat file enabling RAPI (This is used to communicate with your XDA once it has done using Activesync). Then select the Unlock CID option. Once completed I then exited the wizard and followed the instructions as part of the rom upgrade and all worked well no hitches except the one mentioned above about the keyboard (now I have to find out how to modify the registry).
So what I used: aWizard 1.3 Beta 2 and QTEK Rom 2.17
186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe
Mystery Solved!!!!
I finally figured out why its not working....
When I downloaded the loki zip file I opened it up in winzip and dragged the contents to a folder I created. Ran the batch file eveything seemed ok and the unlocker said it unlocked the device.
I have now realised that you have extract the files from the loki zip file and use the folder structure. If you don't, the utils directory is not created and the loki.bat cannot reference some files.
Found the answer on page 12/13 of the loki thread.
Thanks All
Ben
After doing the CID unlock the ROM install worked fine.
Just having the keyboard issue at the moment with symbols, went to:
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
but could not find the locale key to set to UK?
All i see is:
DefaultKeyLock
InitialDelay
MuteSwitch
RepeatRate
ShowWarningMsg
Am i looking in the right place or do i have to add this in (if so how)?
Cheers
Youv'e got to create a new registry key. Assuming you've got a registry editor. Go to HKEY_CURRENT_USER / Control Panel / Keybd.
Then create a new string value. Name it Locale and give it a value of 0809 for UK. Then reboot.
Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum
quick question...
i am fed up with waiting for o2 to release their latest ROM so i am going to take the plunge with this ROM instead, my question is do i have to make any special changes once installed to make it work with O2 UK i.e. mms settings, GPRS settings etc.?
Also i noticed somebody has put together a T-Mobile USA customised ROM any chance that somebody will do this for O2 UK?
hyettd said:
Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum
Click to expand...
Click to collapse
The Problem im having here is that once i have created the registry key, it deletes after a reboot. Is there something else i need to unlock to allow writing to the registry?
New Roms
Hi there - I'm sure this is your answer - I have read this on many forums.
WM05 takes a while to store the registry updates after you exit your editor. Make the registry change and wait a minute or so before performing the soft reset.
Hope this helps - we have all fell for this "improvement" to WM5 from the boys at MS.
Regards,
Chris.
:lol:
Thanks Bilbo . . . Spot on. First time to all this and followed it a treat
Thanks All
Hi, i'm new on this forum,and have a problem.When i try to install some wm5 software (autokeylock wm5 for exemple), on screen i got message:"Installation was unsuccessful.The program or setting cannot be installed because it does not have sufficient system permissons".So what to do?Sorry for my english.P.S.I use serbian mobile operator,no orange.Thank you.
So,nothing?
zikicz said:
So,nothing?
Click to expand...
Click to collapse
Find and download "regeditSTG2" and "SDA_Application_Unlocker".
Copy RegeditSTG2 to phone and execute.
Locate the key "HKEY_LOCAL_MACHINE\SECURITY\POLICIES\POLICIES" and select Values (left softkey).
Edit 00001001 to hold Value Data = 1
Edit 00001005 to hold Value Data = 40
Sync the phone and execute SDA_Application_Unlocker on the PC. Select "Unlock" and once succesful turn the 'phone off and then back on.
Now you are free to do what you like.
Tnak you man.
now i have a new problem.I copy regedit to phone (mem card) but when i try to execut them it look for COMMAND and PARAMETERS.So,what to type in thiese fileds?Sorry,but i am new in smartphone zone.
zikicz said:
now i have a new problem.I copy regedit to phone (mem card) but when i try to execut them it look for COMMAND and PARAMETERS.So,what to type in thiese fileds?Sorry,but i am new in smartphone zone.
Click to expand...
Click to collapse
No idea. Are you sure it was "REGEDITSTG2"?
yes.So i can't execute them on the phone.Meybe i do something wrong?Can i do first with unlocer?
Finally after the sucessful work of the PV team...we have a working STK for our PPC's....attached is the STK extracted from Sonblacks Rom..
Enjoy and post your feedback ( even if it works or NOT )
Edit : 22nd June 2008
as per request..i have modded the cab file and added the REG keys also..now please try again and post the results..else i have started to learn Porting of ROMs..have extracted Farias ROM..will see later if there is something useful for our device.. ..
I owned a wizard on my 18th Bday ( but blowed the battery off )
Edit : 23rd June 2008
Please try the newly attached CAB file an post your results
im from the phillipines.. using both smart and digitel networks.. this doesnt work for me.. only white blank white screen display..
did the STK work for YOU in Sonblacks Rom
ather90 said:
did the STK work for YOU in Sonblacks Rom
Click to expand...
Click to collapse
never tried the sonblack rom ather.. im using master c_shekhar wm6.1 build 19209..
the STK has been reported to work on Sonblacks ROM..so i dumped the ROM and extracted the STK from it..
No luck yet...
It's not working. Only opens a blank white screen. After setting the STK service to start at startup-and a softreset, the STK UI link in start menu/programs changes to DialogServices which is my network provider. I tried diffrent settings in registry too, but still No luck. Can you add the settings in HKLM/Services/STK_Service too in the CAB. Is there any other Registry modifications that affects STK.
oki doki..will redump the rom again and take out the registery also
New version added..check first Post for the cab
------>
ather90 said:
New version added..check first Post for the cab
Click to expand...
Click to collapse
Still not working.... But try this,
1.Install & restart
2.Open FdcSoft task-mgr or SKtools
3.Go to services section. You will see a service named Stk_Services. This is in automatic mode, but stopped.
4.Start it.
5.Now click the start menu shortcut. It may still show a white screenin the first time, but notem the soft-keys are now labeled.
6.Exit from it and clic again.
7. NOW IT WORKS. But when clicked on something in the second level menu, it gives a error message
"sorry, service is unavailable. Error:FF03"
Still something is missing. I think the best method available is to build our rom on the PDAVIET rom.
these files are extracted from PV rom it self..now i know it cant be the Enviromental Difference ..what could be the problem..will try again the Registery
ather90 said:
these files are extracted from PV rom it self..now i know it cant be the Enviromental Difference ..what could be the problem..will try again the Registery
Click to expand...
Click to collapse
I dumped the PDAVIET rom and searched the registry for anythink related to STK, but I failed. Looking forward for a good solution from you. Sir, how can I set the STK service to autostart & keep working at startup? I tried in the registry manually and with FdcSoft Task Manager. It says automatic, But still I have to start it manually after each restart.
tell me one thing..when u "Start" the STK..can u tell me whaat does the following registery shows you
HKLM/Services/Stk_service/
Keep =
tell me whats the value of keep after u start it
after i installed the STK2.cab, it autatically restarded the phone, open my program folder and saw that there are two STK link.
one is the original "myservice" Menu
and the other one is STK UI
i clicked the new link program bt unfortunately, the same appearance that i see everytime i open my last link of STK program. There are only white screen and "STK Service" at the top.
here is what happened asther. hope that it will help you making the updated cab for STK..
thanks for the Info.btw
the names ather
ather90 said:
tell me one thing..when u "Start" the STK..can u tell me whaat does the following registery shows you
HKLM/Services/Stk_service/
Keep =
tell me whats the value of keep after u start it
Click to expand...
Click to collapse
HKLM/Services/Stk_service/
Keep = 1
(But this is independent of the status of the service. No matter it is STARTED or STOPPED, the 'keep' stays in 1
lols..
sori... it reminded me of something.. ahehehe.. its a typo error..
shiranmotha said:
HKLM/Services/Stk_service/
Keep = 1
(But this is independent of the status of the service. No matter it is STARTED or STOPPED, the 'keep' stays in 1
Click to expand...
Click to collapse
hmm..i gues i will have to try some thing else..will see what i can do
what is the update for this cab?
ahehe..
sori for being impatient.. ahehehe..
ciao!
What about this...?
ather90 said:
hmm..i gues i will have to try some thing else..will see what i can do
Click to expand...
Click to collapse
Can we use this in some way to work in our Hima...?
http://forum.xda-developers.com/showthread.php?p=2329551#post2329551
will see this..once i confirm that third version is not working
Third virsion released
I am posting this info because I need some assistance in getting it to work perfectly I was hoping some of you out there may have some additional insight! thank you
Known Bugs/Issues
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
HTC SHIFT FULL PHONE
I don't think it is currently need but I have also inclued the hardsspl for CDMA
Be careful with the RealVGA bit if you haven't got an English machine - I have so I couldn't test this bit - I inferred the solution from one of Daniel's posts.
1. Reset SnapVue if you have been hacking it.
- Run Clearstorage.exe (or Settings, Clear Storage)
- Disable Wi-Fi in Vista (Communication Manager)
- Enable Modem
2. Get Access to WM6
- In SnapVue, click Outlook E-mail
- Click Menu,New
- Click Menu,New,Insert Picture
- Where it says "My Pictures", click and navigate to "Windows" directory
- Highlight (using arrow keys) the "Start Menu" directory and copy it (using ctrl-c)
- Navigate into "Settings" directory in "Windows" and paste (ctrl-v). Ignore the calendar error.
- Click Ok and go back to SnapVue.
- Click Settings button and then "Start Menu, Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Using "Tools, Folder Options" (alt T,O), click on the View tab and make sure that "Hide protected operating system files (Recommended)" is NOT enabled.
- Copy "RegistryEditor.exe" to "Pocket_PC,"\" directory.
- Still on Vista side, Using "Communication Manager", Click "Advanced Settings" and then "Reset Snapvue". Click OK.
- Switch to snapvue and wait for it to start up. If you miss the warning to allow running "RegistryEditor.exe", don't worry - click setting, Start Menu, Programs, File Explorer, then navigate to Windows, StartUp and run it from there.
- In RegistryEditor.exe, navigate to HKEY_LOCAL_MACHINE, Services. Delete the "SnapVue" entry. Click and hold the "SnapVue" entry until the context-sensitive menu appears, then select delete.
- Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
- Close RegistryEditor.exe.
- In File Explorer, delete the PKG.exe and BlockTitleBar.exe files from the Windows\StartUp directory.
- Switch back to Vista and reset snapvue from Communications Manager's Advanced Settings.
- Switch back to SnapVue. When it has finished starting up and you have closed RegistryEditor, you will notice that you have the start menu at the top left of the screen.
- Tidy up - reset and delete "Start Menu" from the "Windows, Settings" directory
Pat yourself on the back! You have successfully converted the HTC shift's SnapVue to WM6.
2a. Enable all the hidden "Today" items
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- In Vista, install and run ceregedit_setup.exe
- Press F1 to connect to WM6
- Use Tools, Unlock Registry to enable the import
- Use Edit, Import to import "today.reg". Ignore any errors.
- Close ceregedit
- Switch to WM6
- In "Start Menu, Settings, Today, Items", pick the today items you want to display.
3. Change the display resolution to 96 dpi (BE SURE THAT THE CHECK BOX FOR DISABLE PHONE SKIN IS CHECKED)
A word of warning - this version of RealVGA is English and does not work very well with non-English systems.
- If you have a non-English version of the Shift, then you will not have a directory called \Windows\StartUp. Before doing the rest of this section, you should create a "StartUp" directory in your Windows directory and copy all of the files from your language equivalent of StartUp.
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Copy "RealVGA_11.CAB" and "ResPack96dpi.ARM.CAB" to "Pocket_PC,"\" directory.
- Switch over to WM6
- From File Explorer (Start Menu, Programs, File Explorer), navigate to the top directory (using Up button as necessary)
- Install RealVGA_11.CAB accepting the security warning
- Install ResPack96dpi.ARM.CAB accepting the security warning and select ok to restart the system
- Run RealVGA from Start Menu, Programs
- Change to 96dpi and press OK and wait while the system restarts
- Tidy up - Using "Start Menu, Settings, System, Remove Programs" remove WM6_RealVGA (its job is done)
- In File Explorer, delete the 2 CAB files.
hkey_local_machine\system\state\phone
block voice MO call Change Registry from 1 to 0
CONGRATULATIONS!!!!!
Voice Calls are now enabled with working mic and speaker through headset also speaker phone works
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
Side Note: you may want to also adjust these entrys as well
these will give you access to the phones menu options
hkeylm\software\oem\phonesetting
change all keys that begin with hidden from 1 to 0
hkeylm\controlpanel\phone
delete the Redirect key
Here's a link for everything you need
http://rapidshare.com/files/236022979/CDMA_Shift_Phone.rar.html
http://rapidshare.com/files/210940637/CDMA_Shift_Phone.rar.html
'This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.'
Link is down. Only ten downloads till it expired. Please post to a premium rapidshare account or send the download link again and I will post for you.
link has been updated
cybericebyte said:
link has been updated
Click to expand...
Click to collapse
Thanks much, downloading now !
Trashed Snapvue
I ran the CustomRuu from the zip file you posted, and managed to get into a loop where Windows Mobile will not boot. I can get into the bootloader with tools I downloaded on XDA, but have not found a ROM that will install without an error. Do you have a CDMA compatible ROM or even the original ROM that comes with the device. Will dive into the box to see whats on the disks next.
Need help though.
the orginal rom should be included in the zip folder
ShiftCDMAFLASH is the folder that I flashed (successfully) that left me in bootloader (three color screen).
RUUNBh is in the upper middle of the screen
CLI 0200
SPL 0.14.000
appear below, and USB in a white box appears below that.
The ShiftCDMAFLASH.zip file contains a different nbh rom file from the folder above, but I cannot get past 0% on the loader screen. I have used ecshift.exe -bl to get back in bootloader mode and hard resetted the Windows mobiel side, but no luck yet. Any suggestions ? +
just give it time
The 0.19 nbh file give a 262 error
On the other hand I can flash the 1.14.651.1 Rom with no trouble but I reboot (even after a hard reset) into the tri color screen with USB on the screen as listed above. Stalled in this mode.
Any other options ? or roms that might work. The GSM roms on XDA also crash out so I am locked in the 1.14.651.1 bootloader mode.....grrrr.
Is there another option I am missing ? I also tried the Snapvue reset program for Vista from the HTC website
Snapvue Software version 1.14.651.1
Snapvue Software version 1.14.651.1 is the one that I installed on my CDMA shift and now cannot get out of bootloader screen (tricolor) despite hard resetting the WM side. I am able to reflash the above listed rom with no errors. But still end up in the bootloader screen.
No other posted rom on XDA will load (probably due to GSM/CDMA differences). Do you have an alternative CDMA rom I could use or is there a way to get out of the bootloader and force WM to load that I am missing ?
use mtty should be posted on site
Used mtty
Thanks. I had been usimg mtty. I can successfully hard reset but WM boots back into the tri color bootloader screen following hard reset. lol. Still stuck. Thanks for the suggestion though.
now do ecshift mode 0 then mode reset
cybericebyte said:
now do ecshift mode 0 then mode reset
Click to expand...
Click to collapse
Thanks, I have been doing all of the above. Restarts into the tricolor screen. I can reformat with the rom you provided. Still tricolor on hard reset. Something in the rom is preventing wm from loading. Anything else left to do ?
I am probably going to need to give up. The snapvue side is toast. Unless there is someone with the original CDMA Rom out there willing to post online (even HTC) I do not think I can make this work.
Original CDMA ROM
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps
rafaelc said:
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps
Click to expand...
Click to collapse
Quick response thanks. Will try it out today and post my results. I did download and reupload to rapidshare. Here is the link.....
http://rapidshare.com/files/2374198....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
I hope CMONEX is okay with that.
Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.
nmhusa said:
Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.
Click to expand...
Click to collapse
Excelent!
you are right, but that kind o things is part of the learning process
Thanks again for all the help.
Also managed to fix the Font sizes in Snapue via registry edits so that they increase in proportion to the scaled screen resolution with RealVGA. Until I figure out how to HardSPL the CDMA Shift and cook a custom rom, this will have to do.
Hi, i just flashed My device and I really like My new rom but there are 3 Problems and I wanted to ask for some tips to solve them..
oh before I forget that: I don't use Manila if it's important
1. I want to close programs when I push the "x" button on the top for some seconds but it just closes and I have to open My taskmanager to close it.
how can I fix that?
2. When I open My Album all the Pictures in My Camera folder appear but when I push Albums on the bottom the other folders doesn't appear... Only the loading circle comes out on the top and then again the camera folder...
3. I cannot open My communications setup, to configure My internet via SIM card... It just doesn't work.. The windows appears and disappears again in the same second..
Are there any cabs to fix these problems?
Please help Me to fix these things..
that would be great.
Thanks to all of you
better tell what rom you flashed?
regards stef
I am using the nhathoa lite german rom
i am searching for the link but till now I couldnt find it...
aren't there any cabs to solve these problems?
no one with a solution?
help please..
ROM-Version
2.53.405.5 (23554) GER
System-Version
5.2.21898
1. If the ROM has the X button on the top right, go to Task Manager in your programs, the select settings and select close app instead of minimize when pressing X button. If it does not, then I would suggest Quick Menu to close your apps.
2. Almost sounds like it's not reading your storage Card. Go to Camera settings and select "save images to SD Card". In Manila, you can set your album tab to a specific folder in your registry under HKLM\SOFTWARE\HTC\HTCAlbum\favorite_folder=\\Storage Card\\"Your folder Location"
3. Did you hard reset after you flashed the ROM? You can try turning off Sense in your Home settings and try it again.