Hi, i just flashed My device and I really like My new rom but there are 3 Problems and I wanted to ask for some tips to solve them..
oh before I forget that: I don't use Manila if it's important
1. I want to close programs when I push the "x" button on the top for some seconds but it just closes and I have to open My taskmanager to close it.
how can I fix that?
2. When I open My Album all the Pictures in My Camera folder appear but when I push Albums on the bottom the other folders doesn't appear... Only the loading circle comes out on the top and then again the camera folder...
3. I cannot open My communications setup, to configure My internet via SIM card... It just doesn't work.. The windows appears and disappears again in the same second..
Are there any cabs to fix these problems?
Please help Me to fix these things..
that would be great.
Thanks to all of you
better tell what rom you flashed?
regards stef
I am using the nhathoa lite german rom
i am searching for the link but till now I couldnt find it...
aren't there any cabs to solve these problems?
no one with a solution?
help please..
ROM-Version
2.53.405.5 (23554) GER
System-Version
5.2.21898
1. If the ROM has the X button on the top right, go to Task Manager in your programs, the select settings and select close app instead of minimize when pressing X button. If it does not, then I would suggest Quick Menu to close your apps.
2. Almost sounds like it's not reading your storage Card. Go to Camera settings and select "save images to SD Card". In Manila, you can set your album tab to a specific folder in your registry under HKLM\SOFTWARE\HTC\HTCAlbum\favorite_folder=\\Storage Card\\"Your folder Location"
3. Did you hard reset after you flashed the ROM? You can try turning off Sense in your Home settings and try it again.
Related
Hey experts
I downloaded and installed TylerC161 compiliation of Touch-it 2.3 (clean, see this thread) with TouchFLo, but after installing successfully, I still can't get the cube to appear. I had the version 2 before and I simply assigned TouchFlo to one of the buttons. The TouchFlo application or shortcut was installed in Programs/TouchFlo folder. After installing this version, I don't see the TouchFlo in that folder (only TF Setting and TouchSetting), nor do i see it anywhere in the Button Settings. Am I missing something? I only found a shortcut file in the Windows directory. But copy/paste that didn't solve. My question is can someone with working Version 2.3 upload TouchFlo.exe file from Windows directory for me so I can copy it where it is supposed to go? Or do I need to reflash and re-install? Thanks!
I tried Touch-It 2.3 fix.cab but that didn't solve it! Any ideas?! Please?!
you must select your method of cube activation in TFsettings i believe. Its one of those choices.
fzzyrn said:
you must select your method of cube activation in TFsettings i believe. Its one of those choices.
Click to expand...
Click to collapse
I did that, and it still didn't create TouchFLO icon or gave me an option in the Buttons! Very strange!
I even tried another Flash from Genuine RUU, and still the same thing! Please help, anyone?
coolmen777 said:
I did that, and it still didn't create TouchFLO icon or gave me an option in the Buttons! Very strange!
I even tried another Flash from Genuine RUU, and still the same thing! Please help, anyone?
Click to expand...
Click to collapse
Once you select an option in TFsetting, you need to reset the device.
There will not be any buttons to start touchflo, just the option that you selected, meaning either sliding your finger from the top of the screen to the bottom or center to bottom, and etc.
ttran001 said:
Once you select an option in TFsetting, you need to reset the device.
There will not be any buttons to start touchflo, just the option that you selected, meaning either sliding your finger from the top of the screen to the bottom or center to bottom, and etc.
Click to expand...
Click to collapse
Never Mind, it is working! Great job, man, I must have flashed like 5 times... THANKS A LOT!
Re-installed Kaiser.CommManager.10Button.3GOnly.Switch.For.Other.Devices-Schen
and now there is no text under the icons, and no menu options. Any suggestions? Thanx in advance.
nufsaid said:
Re-installed Kaiser.CommManager.10Button.3GOnly.Switch.For.Other.Devices-Schen
and now there is no text under the icons, and no menu options. Any suggestions? Thanx in advance.
Click to expand...
Click to collapse
Hi
I had the same issue and first of all think this is a language compatibility problem (...what is your??)!however, did you installed any other CommManager too??
Try to uninstall it (also others if you did!), soft-reset, install only this one again (but be sure the CommManager.exe app is really closed!!)!!If doens't work:
1)go in the registry and check these keys (default value): [HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
->"EmptyMenuBar -> 0"
->"TextColor -> 0"
2)go in the \Windows folder and look for the "CommManager.exe.0409.mui" file (...i'm assuming you haven't an english device/os), cut it and paste wherever you want.Soft-reset and look what happen!If still nothing change the language code (..0409.. -> it is for english, more here) in that file to your default one and overwrite the file in \Windows folder!!Maybe now you get the text, but in english! ...better than nothing!
I have this issue with the 6 button on/off CommManager (i can use it only in English), but using this, like the HTC one (more Beam and 3G buttons, but with 9 (default) and not 10 buttons) i have no language problem, try this one you too!!!
Hope to help you!!
Ciao
Thanx works great now.
SOLVED
nufsaid said:
Thanx works great now.
Click to expand...
Click to collapse
..good!!
problem came back...this only happens after i reflash my device, i'm using WWE ATT rom now as compared to dutty's 6.1 wwe, and now my 10 button comm manager is doing the same thing. Heres a screen of what it's showing. (chat and icontact should only be viewable from today screen.)
nufsaid said:
problem came back...this only happens after i reflash my device, i'm using WWE ATT rom now as compared to dutty's 6.1 wwe, and now my 10 button comm manager is doing the same thing. Heres a screen of what it's showing. (chat and icontact should only be viewable from today screen.)
Click to expand...
Click to collapse
...So, if you are using a WWE (english) Rom, your isn't a language problem!!
If you necessarily want this CommManager try to ask in the thread where got it (...I didn't well understand if this is the default one coming in that rom!), or try this other one (also 10 buttons, but different -> look the picture!, and try to install over it, if that is the default)!
...is that the default?? (add more info!)
If yes, first of all ask for help in the rom thread (maybe it's a rom bug, and other people have the same problem)!
If no, try what i said above!
Let me know...
Found Problem!
This only happened when I created a shortcut to commanager from windows folder and placed into startmenu/programs, after deleting shortcut all is well. I was trying to re-map the PTT button to work w/ commanager, the only way to I saw to do this was to copy original commanager to the folder that contained a list for re-mapping options (settings/buttons/program buttons) so I guess i'm **** out of luck on a remap to commanager, if you know anything let me know, thanks for your help.
I'm having some trouble with a shortcut on the Start Menu. I had a link to Resco File Explorer which worked fine, but then stopped working following an upgrade of the application (I suspect the upgrade process removed it some one storage area and stuck the new version in the other, or something like that). Clicking the shortcut now does nothing.
I also had it linked on the TF3D Programs Tab. This I've managed to remove and re-add using the normal interface and now works fine. However if I go to edit the start menu I can see TWO entries for Resco File Explorer - one that is ticked with a duff icon, and one which isn't but with the correct icon. By problem is that if I try and untick the duff one it errors "Cannot move that item".
Any ideas??
uninstall and reinstall. if you have an older version and upgrade, try downloading the upgraded cab and install that.
In File Explorer, go to My Device > Windows> Start Menu. Tap and hold on the inoperable shortcut and select "delete"
akash_84 said:
In File Explorer, go to My Device > Windows> Start Menu. Tap and hold on the inoperable shortcut and select "delete"
Click to expand...
Click to collapse
Excellent - many thanks - job done!
(easy when you know how..
Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]
BEATTWEAKER said:
Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]
Click to expand...
Click to collapse
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?
All of your questions are answered inside
refuse2bstopped said:
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?
Click to expand...
Click to collapse
I have been using this rom for a couple of weeks now and I have just discovered once I reflashed it I have seemed to fix the only error that was found...
here is a posting that will give some info and hopefully answer alot of your current questions..
Default FAQ
FAQ Section:
Read everything in this section before downloading the roms and flashing.
If you don't understand it, read it again and again until you understand.
Once your done flashing your device double check back here again to configure your device.
I will not reply to any subjects already covered in this section.
I'm not trying to be rude, I'm just very busy with finishing up this project and also working on other projects.
Back up your phone before downloading and flashing this rom... I do not want anybody to loose their data due to flashing this rom, as the rom will erase all of your data...
How To Flash Rom
HERALD-USPL-beta3 - posted by tiksister - rapidshare
How-To Flash the HERALD-USPL-beta3:
Download and extract both files.
Place the extracted OTP v7.1.nbh into the Herald-uspl-beta3/RUU folder.
Move the entire Herald-uspl-beta3 folder to the root of the c:\.
Follow the simple readme file.
Break down of how to flash this rom:
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Instructions by Ivanmmj
===================================
If your device is already HARD-SPL read the following link before flashing.
HARD-SPL
======================
Disable Random Access and Enable Scrolling
With random access you must do the following to enable contact scrolling.
Click on the contacts button at the lower right hand side of the screen.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
Now I know the following will sound strange but it will enable scrolling in the contact menu.
Repeat the following steps again, and the random acess bar on the right handside will go away and scrolling will work again.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
If you want to enable random access, just go back and uncheck the "Show alphabetical index"
======================
How to turn off QuickMenu
/Start/QuickMenu/Exit
It will prompt you with "Exit QuickMenu?
Choose yes and it will not startup again even after a reboot.
Things to do after flashing your device:
Network Wizard
Go to \Start\Settings\Connections\Network Wizard
Choose your location and provider, do not reset the device when prompted.
Connections
Go to \Start\Settings\Connections\Connections
Once completed save and exit
Video on how to setup your device after flashing
MMS/SMS Setup
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: sendlimit3 which will be set to the default of 300k. u gotta change it to 1228800 and than the 1200k will appear.
note u can also change sendlimit 2, 1 to be the same as what ever u decide to change wap * sendlimt* to be. once u do this the 1200k will appear.
++++in between doing the above and below, u have to go to
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
=======================
Soft Keys
The calendar and contacts keys can be changed with the following steps.
/Settings/soft keys
Use this setting feature to change to what every programs you want.
========================
Show CIM contacts
By default it has been disabled so your CIM contacts will not display, use the following reg hacks to enable it.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSIM"=dword:00000001
=========================
Show clock instead of battery
If you want to show the clock instead of the battery or the other way around, use the following reg hack.
Clock
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:0
Change the current dword:0 to 1.
Battery
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:1
Change the current dword:1 to 0.
==========================
M2DC
Just tried the M2DC theme manager on 7.3 Std, with a renamed .zip file to .m2dct file (specifically the KnobiSkin from the M2D skin thread).
First time, it locked up. M2DC continued with spinning icon until I forced a reboot. Touchflo was off after reboot, and after enabling it everything appeared to be the same.
Second attempt, I disabled Touchflo from today before applying the new theme. Got the "Applying Theme" prompt. After M2DC closed, I reactivated touchflow and new theme was applied.
Simple instruction for use of M2DC Themes on OTP 7.3:
Find a skin you like, download the zip file (not the cab),
Rename file to .m2dct,
Copy new file to the themes directory of the M2DC install directory,
Disable touchflo in Today settings
Start M2DC,
Go to themes tab (the first time it will back up the default theme),
Click the new theme then apply,
Restart touchflo.
Alternate for creating themes from skin CABs:
Run M2DC first, let it make the DefaultThemeBackup.m2dct file, Close M2DC.
Run the CAB skin of choice.
Rename DefaultThemeBackup.m2dct to OriginalTheme.m2dct (or anything else with same extension).
Rerun M2DC. It will detect no DefaultThemeBackup.m2dct and will ask to back up again. Let it make new backup. Close M2DC.
Rename new file to the name of the new theme.
Repeat for each skin CAB you wish to convert to m2dc theme file.
Note: The M2DCT files can be large (over 3Mb, 660 files backed up). Best to do this only if M2DC is installed on a large Storage card.
Note 2: Several times M2DC appeared to freeze when applying or backing up themes. It looks like it has problems if touchflo is not off prior to running. It does try to deactivate touchFlo then reactivate when done, but it doesn't appear to work flawlessly yet. It is better to deactivate the Today plugin before running M2DC on this ROM build.
__________________
This mirror pretty much has all roms from version 7.0 - 7.7 which is the most current.
http://www.evolvers.net/Herald_Roms/
Here is one link that has some pretty useful items in it also:
http://forum.xda-developers.com/showthread.php?t=341867
thanks to all of the developers and cooks on XDA for without you guys none of this would be possible
I have a stock HTC Touch Diamond. I am wanting to remove the apps I don't use like Messenger and some others. I tried through ActiveSync but because they are built into the ROM they do not show up. Is there an app or something I can use to remove these?
Thanks
mattygdot said:
I have a stock HTC Touch Diamond. I am wanting to remove the apps I don't use like Messenger and some others. I tried through ActiveSync but because they are built into the ROM they do not show up. Is there an app or something I can use to remove these?
Thanks
Click to expand...
Click to collapse
SKTools will allow you to remove apps that are installed on your device that don't show up in the Remove Programs part of Settings.
Also, you could hard reset your device and soft reset before customizations run and then install only the apps that you want.
Or, use activesync and browse to Windows-Start Menu-Programs and delete the program shortcuts that you don't want to see. Though with this option all you are doing is removing the program shortcut the program files are still there.
I tried SKTools but under the installed programs section it only shows the ones I have installed. I wanted to remove the likes of WLM, YouTube etc. I ripped all the ROM data (following one of the tutorials, so I have 4 RAW files but not sure how to combine them back to an NBH file so I can edit them in a kitchen to remove what I don't want.)
Ok well I managed to reconstruct the ROM but I have no idea how successful I actually was at doing such. I followed the steps here: http://forum.xda-developers.com/showthread.php?t=337066. I really want to put this ROM on the phone http://forum.xda-developers.com/showthread.php?t=622093 but I am afraid that if I screw up the flashing and my reconstructing of the stock ROM didn't work that I would be screwed. Any suggestions? Also my provider doesn't make the ROM available and neither does HTC (for Rogers that is).
In SKTools if you go to the Installed Programs Section click on the right softkey and select settings.
Then scroll down to "Show Applications Not Listed As Installed." Change the setting to Yes.
Maybe then you can remove what you want.
Also, you can use the Move Data part to move files, folders, and applications to Internal Storage to free up space.
Believe it or not but that is not an option under settings that will show Applications not listed as Installed... running SKTools 4.5.1.4.
Scratch that. I found it