I had installed all the components of Cube from the thread
http://forum.xda-developers.com/showthread.php?t=343583
The cube worked fine for me except whenever I soft reset my phone the quick dial screen would be the first screen available and not that HTC home which was the defualt screen
When I unistall all the components and restart the Phone I get a screen with the X mark at the top right corner and busy icon.When I cancel the screen I get the default HTC home screen. Is there some component still left even after uninstall.
My WIndows/startup/ has
poutlook
btdwake
VCDaemon
QuickDial(tried deleting it manually but did not allow)
Regards
What was the error when you tried deleting the QuickDial file? Did you use your PPC File explorer or did you try it via Windows Explorer?
Dr. Strangelove said:
What was the error when you tried deleting the QuickDial file? Did you use your PPC File explorer or did you try it via Windows Explorer?
Click to expand...
Click to collapse
The Error I get when I tried to deleted QuickDial is that it Sharing voilation.The source or destination maybe in use.I am using the file explorer
You need to terminate the 'Quickdail' process. Do that by using this tool:
http://www.4shared.com/file/39875406/cd2a63e3/Alltheway_Task_Manager.html
As you can see, Task Manager by AllTheWay.
Terminate the process using this file and then move the file from the startup folder. Move it, because you want to keep it somewhere safe if other programs/functions start to fail as a result of your actions. Or simply reinstall the Cube if additional problems should occur. Choice is up to you.
After moving or deleting the file, soft reset and see if that problem got fixed.
Good luck!
I have an HTC Shift without a carrier's data service, so I am not able to exploit SnapVue WM using Shiftpack method due to the lack of email without a data connection service. Nor am I able to exploit Snapvue through Internet Conection Sharing method, because that also requires a data connection sevice before showing up in Vista as a shared folder /Pocket_PC. Due to the lack of support for bluetooth, sd card, and WIFI connectivity in Snapvue WM, I am also not able to use these logical methods. Is there any other possible method(s) to unlock or upgrade SnapVue WM?
You don't need a data service. You just need a SIM card. It's harder, but it works. Just setup a fake connection under WM side, and let it try to connect. Use the internet sharing method for that.
Any sim card will work, so you can just borrow one for this.
I have a CDMA version.
I guess you have to wait for a custom rom then.
send me a PM and I can sort you out. (I assume you have SPL 0.14, as all the CDMA shift's I've seen so far)
Hi Guys
I have the same problem where I can not get a data connection. Even with a sim card inserted I can not get vista to see wm. Could it be because my wifi has suddenly disaperd? Any suggestions would be appreciated
Make sure wifi is off when trying this method.
Yes, I thought of that but even if I wanted to turn it on I can't, it is just simply not there, in vista. Even shagcontrol does not turn it on?
Liberate Snapvue the Hard way
I too have a CDMA shift and I librated with the following proceedure and it worked fine for me with no data connection. I will say you may have to do the internet sharing connection and F5 step multiple times before you will see the Icon in my computer to be able to access it but once you do be ready and quick to copy you cab files to the Snapvue side because it will not last forever. last note: if you attempted and still do not get any results check WMDC setting for the allow usb connections and be sure it is set properly
1. Reset SnapVue if you have been hacking it.
- Run Clearstorage.exe (or Settings, Clear Storage)
- Disable Wi-Fi in Vista (Communication Manager)
- Enable Modem
2. Get Access to WM6
- In SnapVue, click Outlook E-mail
- Click Menu,New
- Click Menu,New,Insert Picture
- Where it says "My Pictures", click and navigate to "Windows" directory
- Highlight (using arrow keys) the "Start Menu" directory and copy it (using ctrl-c)
- Navigate into "Settings" directory in "Windows" and paste (ctrl-v). Ignore the calendar error.
- Click Ok and go back to SnapVue.
- Click Settings button and then "Start Menu, Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Using "Tools, Folder Options" (alt T,O), click on the View tab and make sure that "Hide protected operating system files (Recommended)" is NOT enabled.
- Copy "RegistryEditor.exe" to "Pocket_PC,"\" directory.
- Still on Vista side, Using "Communication Manager", Click "Advanced Settings" and then "Reset Snapvue". Click OK.
- Switch to snapvue and wait for it to start up. If you miss the warning to allow running "RegistryEditor.exe", don't worry - click setting, Start Menu, Programs, File Explorer, then navigate to Windows, StartUp and run it from there.
- In RegistryEditor.exe, navigate to HKEY_LOCAL_MACHINE, Services. Delete the "SnapVue" entry. Click and hold the "SnapVue" entry until the context-sensitive menu appears, then select delete.
- Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
- Close RegistryEditor.exe.
- In File Explorer, delete the PKG.exe and BlockTitleBar.exe files from the Windows\StartUp directory.
- Switch back to Vista and reset snapvue from Communications Manager's Advanced Settings.
- Switch back to SnapVue. When it has finished starting up and you have closed RegistryEditor, you will notice that you have the start menu at the top left of the screen.
- Tidy up - reset and delete "Start Menu" from the "Windows, Settings" directory
I hope this helps if you have any other questions PM me
RegistryEditor.exe ...i can't find it .. the only thing i found is regedit.exe and is not working under windwos mobile...it says not suported..help
rom 1.30.406.0 FRE
Hello, after installing the thinking have all the options I find myself with a factory or SnapVUE I can not install USBTOOL therefore impossible for me to change again the rom I really hate .. .! So be very careful with you. If a super installer is in the corner to help me install a new rom without going through the usual procedure will be welcome. Otherwise the shift is really great.
I am posting this info because I need some assistance in getting it to work perfectly I was hoping some of you out there may have some additional insight! thank you
Known Bugs/Issues
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
HTC SHIFT FULL PHONE
I don't think it is currently need but I have also inclued the hardsspl for CDMA
Be careful with the RealVGA bit if you haven't got an English machine - I have so I couldn't test this bit - I inferred the solution from one of Daniel's posts.
1. Reset SnapVue if you have been hacking it.
- Run Clearstorage.exe (or Settings, Clear Storage)
- Disable Wi-Fi in Vista (Communication Manager)
- Enable Modem
2. Get Access to WM6
- In SnapVue, click Outlook E-mail
- Click Menu,New
- Click Menu,New,Insert Picture
- Where it says "My Pictures", click and navigate to "Windows" directory
- Highlight (using arrow keys) the "Start Menu" directory and copy it (using ctrl-c)
- Navigate into "Settings" directory in "Windows" and paste (ctrl-v). Ignore the calendar error.
- Click Ok and go back to SnapVue.
- Click Settings button and then "Start Menu, Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Using "Tools, Folder Options" (alt T,O), click on the View tab and make sure that "Hide protected operating system files (Recommended)" is NOT enabled.
- Copy "RegistryEditor.exe" to "Pocket_PC,"\" directory.
- Still on Vista side, Using "Communication Manager", Click "Advanced Settings" and then "Reset Snapvue". Click OK.
- Switch to snapvue and wait for it to start up. If you miss the warning to allow running "RegistryEditor.exe", don't worry - click setting, Start Menu, Programs, File Explorer, then navigate to Windows, StartUp and run it from there.
- In RegistryEditor.exe, navigate to HKEY_LOCAL_MACHINE, Services. Delete the "SnapVue" entry. Click and hold the "SnapVue" entry until the context-sensitive menu appears, then select delete.
- Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
- Close RegistryEditor.exe.
- In File Explorer, delete the PKG.exe and BlockTitleBar.exe files from the Windows\StartUp directory.
- Switch back to Vista and reset snapvue from Communications Manager's Advanced Settings.
- Switch back to SnapVue. When it has finished starting up and you have closed RegistryEditor, you will notice that you have the start menu at the top left of the screen.
- Tidy up - reset and delete "Start Menu" from the "Windows, Settings" directory
Pat yourself on the back! You have successfully converted the HTC shift's SnapVue to WM6.
2a. Enable all the hidden "Today" items
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- In Vista, install and run ceregedit_setup.exe
- Press F1 to connect to WM6
- Use Tools, Unlock Registry to enable the import
- Use Edit, Import to import "today.reg". Ignore any errors.
- Close ceregedit
- Switch to WM6
- In "Start Menu, Settings, Today, Items", pick the today items you want to display.
3. Change the display resolution to 96 dpi (BE SURE THAT THE CHECK BOX FOR DISABLE PHONE SKIN IS CHECKED)
A word of warning - this version of RealVGA is English and does not work very well with non-English systems.
- If you have a non-English version of the Shift, then you will not have a directory called \Windows\StartUp. Before doing the rest of this section, you should create a "StartUp" directory in your Windows directory and copy all of the files from your language equivalent of StartUp.
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Copy "RealVGA_11.CAB" and "ResPack96dpi.ARM.CAB" to "Pocket_PC,"\" directory.
- Switch over to WM6
- From File Explorer (Start Menu, Programs, File Explorer), navigate to the top directory (using Up button as necessary)
- Install RealVGA_11.CAB accepting the security warning
- Install ResPack96dpi.ARM.CAB accepting the security warning and select ok to restart the system
- Run RealVGA from Start Menu, Programs
- Change to 96dpi and press OK and wait while the system restarts
- Tidy up - Using "Start Menu, Settings, System, Remove Programs" remove WM6_RealVGA (its job is done)
- In File Explorer, delete the 2 CAB files.
hkey_local_machine\system\state\phone
block voice MO call Change Registry from 1 to 0
CONGRATULATIONS!!!!!
Voice Calls are now enabled with working mic and speaker through headset also speaker phone works
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
Side Note: you may want to also adjust these entrys as well
these will give you access to the phones menu options
hkeylm\software\oem\phonesetting
change all keys that begin with hidden from 1 to 0
hkeylm\controlpanel\phone
delete the Redirect key
Here's a link for everything you need
http://rapidshare.com/files/236022979/CDMA_Shift_Phone.rar.html
http://rapidshare.com/files/210940637/CDMA_Shift_Phone.rar.html
'This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.'
Link is down. Only ten downloads till it expired. Please post to a premium rapidshare account or send the download link again and I will post for you.
link has been updated
cybericebyte said:
link has been updated
Click to expand...
Click to collapse
Thanks much, downloading now !
Trashed Snapvue
I ran the CustomRuu from the zip file you posted, and managed to get into a loop where Windows Mobile will not boot. I can get into the bootloader with tools I downloaded on XDA, but have not found a ROM that will install without an error. Do you have a CDMA compatible ROM or even the original ROM that comes with the device. Will dive into the box to see whats on the disks next.
Need help though.
the orginal rom should be included in the zip folder
ShiftCDMAFLASH is the folder that I flashed (successfully) that left me in bootloader (three color screen).
RUUNBh is in the upper middle of the screen
CLI 0200
SPL 0.14.000
appear below, and USB in a white box appears below that.
The ShiftCDMAFLASH.zip file contains a different nbh rom file from the folder above, but I cannot get past 0% on the loader screen. I have used ecshift.exe -bl to get back in bootloader mode and hard resetted the Windows mobiel side, but no luck yet. Any suggestions ? +
just give it time
The 0.19 nbh file give a 262 error
On the other hand I can flash the 1.14.651.1 Rom with no trouble but I reboot (even after a hard reset) into the tri color screen with USB on the screen as listed above. Stalled in this mode.
Any other options ? or roms that might work. The GSM roms on XDA also crash out so I am locked in the 1.14.651.1 bootloader mode.....grrrr.
Is there another option I am missing ? I also tried the Snapvue reset program for Vista from the HTC website
Snapvue Software version 1.14.651.1
Snapvue Software version 1.14.651.1 is the one that I installed on my CDMA shift and now cannot get out of bootloader screen (tricolor) despite hard resetting the WM side. I am able to reflash the above listed rom with no errors. But still end up in the bootloader screen.
No other posted rom on XDA will load (probably due to GSM/CDMA differences). Do you have an alternative CDMA rom I could use or is there a way to get out of the bootloader and force WM to load that I am missing ?
use mtty should be posted on site
Used mtty
Thanks. I had been usimg mtty. I can successfully hard reset but WM boots back into the tri color bootloader screen following hard reset. lol. Still stuck. Thanks for the suggestion though.
now do ecshift mode 0 then mode reset
cybericebyte said:
now do ecshift mode 0 then mode reset
Click to expand...
Click to collapse
Thanks, I have been doing all of the above. Restarts into the tricolor screen. I can reformat with the rom you provided. Still tricolor on hard reset. Something in the rom is preventing wm from loading. Anything else left to do ?
I am probably going to need to give up. The snapvue side is toast. Unless there is someone with the original CDMA Rom out there willing to post online (even HTC) I do not think I can make this work.
Original CDMA ROM
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps
rafaelc said:
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps
Click to expand...
Click to collapse
Quick response thanks. Will try it out today and post my results. I did download and reupload to rapidshare. Here is the link.....
http://rapidshare.com/files/2374198....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
I hope CMONEX is okay with that.
Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.
nmhusa said:
Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.
Click to expand...
Click to collapse
Excelent!
you are right, but that kind o things is part of the learning process
Thanks again for all the help.
Also managed to fix the Font sizes in Snapue via registry edits so that they increase in proportion to the scaled screen resolution with RealVGA. Until I figure out how to HardSPL the CDMA Shift and cook a custom rom, this will have to do.
I tried to change start menus to remove some and add others. I went to setting and select menus. When I select any un-slecte one, I got a message of 'you can only slelect 7 items'. Fine! I decided to de-select someone first but I got a 'cannot remove that item'!?
Is this some sort of locking?
Thanks in advance for your help!
frank.lui said:
I tried to change start menus to remove some and add others. I went to setting and select menus. When I select any un-slecte one, I got a message of 'you can only slelect 7 items'. Fine! I decided to de-select someone first but I got a 'cannot remove that item'!?
Is this some sort of locking?
Thanks in advance for your help!
Click to expand...
Click to collapse
I believe, the only ones you can't remove are today, programs, and settings.
Or you could try using File Explorer and go to the Windows folder and open the Start Menu Folder. Then cut the link that you want to remove and paste it somewhere else like in the Programs folder.
Hi, i just flashed My device and I really like My new rom but there are 3 Problems and I wanted to ask for some tips to solve them..
oh before I forget that: I don't use Manila if it's important
1. I want to close programs when I push the "x" button on the top for some seconds but it just closes and I have to open My taskmanager to close it.
how can I fix that?
2. When I open My Album all the Pictures in My Camera folder appear but when I push Albums on the bottom the other folders doesn't appear... Only the loading circle comes out on the top and then again the camera folder...
3. I cannot open My communications setup, to configure My internet via SIM card... It just doesn't work.. The windows appears and disappears again in the same second..
Are there any cabs to fix these problems?
Please help Me to fix these things..
that would be great.
Thanks to all of you
better tell what rom you flashed?
regards stef
I am using the nhathoa lite german rom
i am searching for the link but till now I couldnt find it...
aren't there any cabs to solve these problems?
no one with a solution?
help please..
ROM-Version
2.53.405.5 (23554) GER
System-Version
5.2.21898
1. If the ROM has the X button on the top right, go to Task Manager in your programs, the select settings and select close app instead of minimize when pressing X button. If it does not, then I would suggest Quick Menu to close your apps.
2. Almost sounds like it's not reading your storage Card. Go to Camera settings and select "save images to SD Card". In Manila, you can set your album tab to a specific folder in your registry under HKLM\SOFTWARE\HTC\HTCAlbum\favorite_folder=\\Storage Card\\"Your folder Location"
3. Did you hard reset after you flashed the ROM? You can try turning off Sense in your Home settings and try it again.