Related
Edited 26 jan 2006
I've uploaded a second test version of HTC Wizard's rom port to ftp://[email protected]/Uploads/Blueangel/wm5_test/wizard2ba_v2a_test.rar
(this is a v2 rom with a fixed camera)
USE THIS ROM AT YOUR OWN RISK!!!
This version is a complete Wizard's ROM including:
1. Working MMS client
2. Midi/mp3 ringtone support
3. DirectX mobile/Direct3D mobile (xscale-optimized 3D driver)
4. Built-in cyberon voice-dial
5. Wizard's battery indicator, device lock on today
6. Some cosmetic changes
7. 32 Mb RAM disk
8. Bug fixes from the previous version (for example now you can add picture to contact).
There is no need to install any of the old CAB-files with fixes on this ROM. All needed fixes are included in "EXTROM" folder.
The "EXTROM" folder has changed from the previous ROM version. You need to do a hard reset before using this ROM!
Known problems:
1. Bluetooth disconnect bug is still there. I have an idea, but would check it later.
2. The device cannot be used as an IR/USB modem. This can be fixed, but I don't have enough time.
3. It seems that midlet manager is not working. Probably this is a bug in original wizard's ROM.
Installation instructions:
1. Modify the operator as needed and if needed:
xda3nbftool.exe nk.nbf nk.nba -x 0x20040521
...read wiki...
xda3nbftool.exe nk.nba nk.nbf -x 0x20040521
2. Create "EXTROM" foder on your storage card, copy there the contents of EXTROM
folder from this archive. The full name of this directory on your device should
be "\Storage Card\EXTROM".
2. Flush the ROM
3. Make the hard reset (press camera+record+reset buttons, select "format storage")
4. Boot. During the first boot the CAB-files from "EXTROM" folder would be
installed. They are unsigned, so you should press "yes" when asked, and
install them to the default folder. This process would be silent on newer
builds of this ROM.
Note for modifying the EXTROM folder:
All CAB-files should have read-only attribute set. Otherwise they would be deleted after installation. This would be fixed in the future releases. And
Config.txt is renamed to Cfg.txt.
CAB files:
Missing-Files.CAB - must be always installed. Wizard's ROM is larger than ours, so several files had to be removed and placed to this CAB.
Default_CAB-shortcut-CDL-08Sep05.CAB
Default_cdl_wwe_version.cab
Default_ie_view.sa.cab
Default_SmartDialing_enable_0915_signed.CAB - these 4 are from original Wizard's ROM.
Camera2K5.cab - camera app and drivers
Note regarding "RAM Disk32". I recommend to move temporary internet files and install unnecessary apps there. Its contents would survive soft reset, but would be cleaned if the battery is removed. The RAM Disk driver is taken from www.buzzdev.net
Okay, so I got the ROM even before you posted this topic (after an hour you've uploaded it...yes, i do check the WM5_test folder on a regular basis, hehe) First impressions is that this ROM is fast, really fast, even faster than the Hima2BA port... I can't really call WM5 "slow" anymore now, it works very well. Gonna test it a bit more later today. And THANK YOU, as usual
Just turned on cleartype and the fonts looks a bit...I don't know...weird. I'm not saying that it is worse than in the older ROMs, it just looks different somehow. Or it's just me. Edit: yes, they *do* look different. I'd say they are nicer though...
install Camera2k5_1 ,it is owrking for camera , this rom fast than others, Pocker msn can't login " sorry, We are unable to sign you in to this service because we could not detect a valid server certificate. this can occur if the date on your device is different from today date.please check the date on your device and change it if necessary.
also missing phone icon at person settingn't set ringtone
hi mwang,can you tell me where can download Camera2k5_1 ,thanks
Mamaich, what can i say, outstanding, as usual...Testing now
great man...
picture and video application isn't working though :?
working awesome, does anyone know how can i install BT Tray?
thanks mamaich
In Phone, Options doesn't work, smartdialing doesn't work...
2. "ok" hardware button is mapped to "record" and this cannot be changed. Would investigate this.
Click to expand...
Click to collapse
Strange. In my device it's mapped to the OK button as in 2003..
Bugs that I found:
1. MSN Messenger does not work
2. Phone Option does not work
3. Unable to assign picture from contacts
4. MP3 ringtone does not work
5. Voice Command BT Headset Dial (by renaming voicecmd.exe to sddialer.exe) does not work
MP3 ringtones work for me
Phone, Options isn't there. comfirm.
Hope to have a fix for that soon.
This ROM is a bit faster, but still no match for wm2003se speed..
Another problem is that I don't seem to be able to connect to the internet using AS, is it just me?
Guess it's back to 2003 for now..
d3vil said:
This ROM is a bit faster, but still no match for wm2003se speed..
Another problem is that I don't seem to be able to connect to the internet using AS, is it just me?
Guess it's back to 2003 for now..
Click to expand...
Click to collapse
I'm back to 2003SE too, currently doing restore. Guess have got to wait for some patches. I must say the speed of this is better then any other WM5 version.
wlinsong said:
hi mwang,can you tell me where can download Camera2k5_1 ,thanks
Click to expand...
Click to collapse
over here http://forum.xda-developers.com/download.php?id=6645
I'll put together quickly a WiKi article with solution to the missing phone settings and such..stay tuned.
WiKi article with solutions and general info here (and also in my signature)
There are no notifications of current internet connection, i mean wifi bluetooth or gprs in the titlebar (like those in himalaya ported WM5)
There is still error when you press album icon in camera app, which can be fixed with installing album
The hardware button OK is mapped correctly , it works fine here
The record button is mapped as Voice Speed dial (the record app is there but doesnot work)
How can i get the tray icons of bluetooth and wifi ?
I like the new battery tray icon
Port to SX66
Great work Mamaich.
Installation was very smooth. The WIki solution to the missing phone icon was a big help. I prefer this version over the orginal WM5 or the himalaya version. I like the EXTROM installation. Not having a camera installed is a big help to SX66 owners, we don't have to deal with the sound issues. Finally got a midi ringtone to work with the wizard version, prior versions I had to convert the Midi to MP3. I have had it lock up on me a few times, but haven't figured out the cause yet.
Thanks again.
Hi all
I installed the HTC Home plug Based on the Kaiser one. With the Weather Patch
But now I have a strange problem. In the Weather Tab it says (null) instead of High or Low.
Same go's for the Ringtone.
Well the problem is: When I reload the Plug it works. But when I reboot my device it show op (Null) again until I reload the Plugin.
Does anyone know this problem???
Thanks in advance.
Same problem, haven't found a real fix yet but I got a workaround you can try.
After every reset of the device follow these steps.
- Disable HTC Home from the today screen.
- Open HTC Home Customizer
- Change some minor detail (usually selected weather city for me)
- Save
- Go back to today screen and HTC home is there with all language files working magically.
It's a bit of a pain in the ass but I haven't found a better solution just yet. Hopefully someone else can answer this for us but in the meantime you can use my cheap method to make it look right.
You have to rename:
windows\HTCHome.dll.0409.mui
windows\HTC_HDlg.exe.0409.mui
windows\HH_0409_WeatherCities.xml
to your locale variable (if your rom isn't wwe), in my case it's spanish (0C0A):
windows\HTCHome.dll.0C0A.mui
windows\HTC_HDlg.exe.0C0A.mui
windows\HH_0C0A_WeatherCities.xml
It worked for me.
There's another way to do it, harder but way better, i usually do this with my own cabs because after a hard reset i don't like having to change everything again. Steps:
1- Decompress the cab with winrar
2- Edit the file "setup.xml" and correct things you want to change about installation setup: name of files to install (like in this case), name of registry variables to write (like in 10-button commanager for wing), etc
3- Find and download "Cabpack 1.4", be sure to use the following options for it to work: "compression type = mszip", "Create cabinets for = 16 bit extractor"
4- Use it for re-compressing your modified cab and install.
5- Voilá... great pre-modified cabs that you can keep for the next hard-reset.
Hope you like it. Regards
le_hades said:
You have to rename:
windows\HTCHome.dll.0409.mui
windows\HTC_HDlg.exe.0409.mui
windows\HH_0409_WeatherCities.xml
to your locale variable (if your rom isn't wwe), in my case it's spanish (0C0A):
windows\HTCHome.dll.0C0A.mui
windows\HTC_HDlg.exe.0C0A.mui
windows\HH_0C0A_WeatherCities.xml
It worked for me.
There's another way to do it, harder but way better, i usually do this with my own cabs because after a hard reset i don't like having to change everything again. Steps:
1- Decompress the cab with winrar
2- Edit the file "setup.xml" and correct things you want to change about installation setup: name of files to install (like in this case), name of registry variables to write (like in 10-button commanager for wing), etc
3- Find and download "Cabpack 1.4", be sure to use the following options for it to work: "compression type = mszip", "Create cabinets for = 16 bit extractor"
4- Use it for re-compressing your modified cab and install.
5- Voilá... great pre-modified cabs that you can keep for the next hard-reset.
Hope you like it. Regards
Click to expand...
Click to collapse
GREAT! Im gonna try this out now THanks
The First One WOrked!!!!
Ok but you are right...I dont want to do all that again after Hard Reset. So im going to try make a Modifi on this Cab.. Thanks again
Hello and thanks for this help !
But it doesn't work for me. Maybe you can help me ?
I have the same problem with "null:null"
But the files are already named with my locale variable. (I'm not sure)
windows\HTCHome.dll.040C.mui
windows\HTC_HDlg.exe.040C.mui
windows\HH_040C_WeatherCities.xml
The language of my Windows Mobile 6 is in french. But i want to display weather of "Lausanne" in Switzerland (100C)
You say : if your rom isn't wwe --> How can i see if my rom is wwe ?
Thanks a lot for your answers
on my tytn II I have xda cube and it works fine. I cannot get any version of slithers cube to work. I have tried everything, spent hours, and am sure I followed the instructions from slither exactly
Why not ask this question in the thread it pertains to?
Ive posted 3 now 4 replies and no answers. I really would like to get the slither uno cube to work. any ideas?
leon sprouse said:
Ive posted 3 now 4 replies and no answers. I really would like to get the slither uno cube to work. any ideas?
Click to expand...
Click to collapse
i replied to you in the appropriate thread.
TRY THIS !!!!!
AHHHHHHH! make sure you completely uninstalled any cube version you have installed before.
ANOTHER THING SOFT RESETS ARE VERY IMPORTANT.
Try this.
1. Soft Reset your device (VERY IMPORTANT)
ahhhhh! make sure nobody calls you at the time of installation. (go to comm man and DISABLE the PHONE)
2. Unzip the contents of the zip file.
3. Copy the folder "SCLPC++ to '/Application Data/' NO WHERE ELSE!!!
3. Install FTouchFlo or FTouchSL.
4. Configure FTouchFlo or FTouchSL to open the file 'SCLPC++.exe' for the
Down-Up Guesture.
((((( Now to configure FTouchFlo ****I really don't Know if you need it for FTouchSL****you HAVE to INSTALL the Configuration Tool (FTouchFloConfig_v0.9))))))))))))
5. In this example the path is '/Application Data/SCLPC++/SCLPC++.exe'
6. After You Install the Configuration Tool do a SOFT RESET AGAIN
8. Swipe your finger from the bottom to the top of screen to start cube.
9. IFFFFF YOU HAVE NO RESPONSE DO ANOTHER SOFT RESET.
**** Note: I have read and found that most of the times people are in such a hurry that they forget to do A SOFT RESET (JUST FOR SAFETY) and end up with things not working or worst HARD RESETTING. *****
SO FOLLOW THE SOFT RESET STEPS I INCLUDED HERE JUST FOR SAFETTY
Link for that Thread ????????????/
cube
I did what you said ,not sure if i configured ftouchflo right.In gestures In run aplication box I put the path you stated. nothing happens after soft reset. i noticed that the cube is not in the remove programs box so it's not on the device?
What device you have?
OK. let me check what I wrote to you.
I aknowledge that I'M HAVING probms with FTouchFlo launching horizontal, don't have time to play BUT MANAGED TO RUN the Cube.
Stay tuned.
Sorry Corrected.
leon sprouse said:
I did what you said ,not sure if i configured ftouchflo right.In gestures In run aplication box I put the path you stated. nothing happens after soft reset. i noticed that the cube is not in the remove programs box so it's not on the device?
Click to expand...
Click to collapse
As you can see didn't change that much but reda this again........
Colored Numbers show the change in orther.
AHHHHHHH! make sure you completely uninstalled any cube version you have installed before.
ANOTHER THING SOFT RESETS ARE VERY IMPORTANT.
Try this.
1. Soft Reset your device (VERY IMPORTANT)
ahhhhh! make sure nobody calls you at the time of installation. (go to comm man and DISABLE the PHONE)
2. Unzip the contents of the zip file.
3. Copy the folder "SCLPC++ to '/Application Data/' NO WHERE ELSE!!!
4. Install FTouchFlo or FTouchSL.
5. SOFT RESET
6. ((((( Now to configure FTouchFlo ****I really don't Know if you need it for FTouchSL****you HAVE to INSTALL the Configuration Tool (FTouchFloConfig_v0.9))))))))))))
7. After You Install the Configuration Tool do a SOFT RESET AGAIN
8. Configure FTouchFlo or FTouchSL to open the file 'SCLPC++.exe' for the
Down-Up Guesture.
9. In this example the path is '/Application Data/SCLPC++/SCLPC++.exe'
10. SOFT RESET
8. Swipe your finger from the bottom to the top of screen to start cube.
9. IFFFFF YOU HAVE NO RESPONSE DO ANOTHER SOFT RESET.
**** Note: I have read and found that most of the times people are in such a hurry that they forget to do A SOFT RESET (JUST FOR SAFETY) and end up with things not working or worst HARD RESETTING. *****
SO FOLLOW THE SOFT RESET STEPS I INCLUDED HERE JUST FOR SAFETTY
ANY PROGRAM YOU HAVE THAT ALSO RUN GESTURES?
cube
I was able to download the final ver51 and it works without ftouchflo con but there are no paths to a lot of the icons. i really want to download the uno version
configure touchflo
How do I configure touchflo. what do I do when i open gestures. Im an old man so this is chinese to me
Ohhhh! you didn't have the last version.
Ok! now that you have the LATEST VERSION. Follow the the instructions to install it.
Then go to the following link where MaxMotus created a theme for the CUBE, I didn't installit yet but I'm in that process, I've installed first his Other themes for other Aplications. So far his Set ups are the best NON SLOW ones.
Also make sure to see his other posts.
Stay tune to this thread you've created, and I will walk you thru everything, as I already did it, I've been there.
For now I have to go.
GO HERE FOR THE CUBE SKIN the great MaxMotus created. In the zipis everithing you need also INSTRUCTIONS.
http://forum.xda-developers.com/showthread.php?t=377843
cube
I am just going to install the final 051. It works but some of the icons dont. I really wanted the uno alas.
mm cube
I have the program on my file but haven't tried to open and install it
Basically you just need to drop the file into a directory specified in the install instructions.
Without FTouchFlo????
leon sprouse said:
I was able to download the final ver51 and it works without ftouchflo con but there are no paths to a lot of the icons. i really want to download the uno version
Click to expand...
Click to collapse
Works without FTouchFlo?
Explain.
You guys havent been to this thread..?
http://forum.xda-developers.com/showthread.php?t=354715
I was just about to suggest you go to that thread.
Right away!
Mobile 6 & 6.1 - The whole story.
I am trying to put together this one super thread of applications that we like and dislike , the problems and advantages of them. As people add to the list I will add them to the first set of posts so as to make reading a lot easier once the thread grows. The first posts will also have the post # that it refers to, to also help in easier reading for others.
I will personally try to test as much software as possible if not every piece thats questioned about. The phone I am using is the t-mobile wing until I get my hands on a few other phones.
Please no flaming as I am sure tons of noobs will be drawn to this thread. All I ask is if you cant read the first page then leave, because you know people are going to flame you no matter what.
So there you have it people one thread to ask complain and say what you feel about any aspect of mobile 6 & 6.1.
Arcsoft MMS - One of the best choices in MMS & SMS messaging. Post #9
Cooking your splash screen - to make your own custom splash screens for your phones. Post #14
"ivanmmj's original thread"
Duprade's Keyboard Fix - The best keyboard fix for hardware keyboard mismatches.
"duprade's thread"
HTC Audio Manager - The finger touch ease and smoothness that a HTC phone deserves. Post #25
"free download"
HTC Home - A wonderful addition to and today screen. A seem-less application with multiple applications and uses.
"emunutz's Thread"
ITsPapaBlack Skin-Pack - The black skin set for herald phones and many others. Post #30
"papas thread"
Magic SS - A screen capture utility which a phone should not be without. My first choice for screen shots.
"authors site"
Oxis Hibernate - A sweet utility to free up as much memory as possible. Post #11
"Official Site."
UltimateLaunch - Works flawlessly by my standards. So customizable that how can you resist. Post #10
"Official Site."
Saved for the future part 2 ............
Saved for the future part 3 ............
Saved for the future part 4 ............
Saved for the future part 5 ............
Saved for the future part 6 ............
Saved for the future part 7 ..............
moSess said:
PURESKILLZZZ thanks for the reply.
its just the first post leads me to an open touch release and the part thats relevant isnt very clear(about mms setup).as far as deleting arcsoft from the registry gos.
the second is very helpful but the fact that im uncomfortable deleting registry values that aren't specicific cancels it out.
any help and the diligent yet apprehensive reader of this great forum that gets made fun of by his wife for staring at the screen to read so much usefull info would be greatly appreciated!
Click to expand...
Click to collapse
The MMS walk through for non-working MMS. ( Originally by ndiguy5 )
1.) Remove MMS from the registry.
2.) Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA
3.) Now install Arcsoft_MMS_4281 to install MMS back to phone.
4.) Install network wizard, if you have it already installed skip this and goto the next step.
5.) Now use the network wizard to set up your settings.
6.) It should ask you to soft-reset.
7.) Now you should have a working MMS. If any problems post and I will try to assist you.
"**DOWNLOAD**"
UltimateLaunch description
UltimateLaunch is a powerful plugin for the Windows Mobile today-screen. It provides as many tabs as you like, where you can place other today-plugins and icons to start programs. Switching between tabs can be performed in a modern way with your fingers, by sliding in the desired direction. The switching process will be animated. Almost everything can be individually adjusted.
Here are some key features of "UltimateLaunch":
· unlimited number of tabs on the today-screen
· smooth animations of tab-switches (cube, slide, blend, turn, stripes)
· integrate other today-plugins
· nice 32Bit icons in any size, to launch applications
· (alternative normal program-icons)
· completely operatable with fingers
· application launch, by tipping on the symbols
· switch tab, by sliding left/right with the finger
· start additional programs, by sliding up/down
· display of system state (battery, time)
· many settings, for the own liking
· very friendly in the usage of memory!
· and more
Limitations:
· You can try this application, as long as you like. No restriction in the range of functions. After a while, there will be a short text in the background, when UltimateLaunch is not yet activated.
Requirements:
· Windows Mobile 5/6
"Official Site
Oxios Memory 1.40
Release memory on your Windows Mobile (Freeware)
Oxios Hibernate attempts to release as much memory as possible without damaging the internal state of the Windows Mobile device (Pocket PC or Smartphone).
Oxios CloseApps closes down other applications by sending "Close" messages.
Oxios Hibernate 1.40
WM_HIBERNATE is a window message that is generated by the Windows operating system and sent to an application when system resources are running low. All applications should get the message and handle it by attempting to release as many resources as possible by unloading processes, destroying windows, or freeing up as much local storage as possible without damaging the internal state of the system.
Oxios Hibernate sends WM_HIBERNATE to all applications.
Oxios CloseApps 1.40
Each process started on a Windows Mobile-based Smartphone allocates memory, which cannot be released but is automatically freed when the application process ends.
Oxios CloseApps closes down all applications by sending WM_CLOSE messages.
Info: There is no way to suppress the dialog box!
"Official Site"
Where can i post POSITIVE feedback sos not make clutter?
moSess said:
Where can i post POSITIVE feedback sos not make clutter?
Click to expand...
Click to collapse
You can just normally post. I saved many spots in the beginning of this thread so it wont be a big mess.
Also as it grows I will always put the post numbers next to a particular application or fix so when people read they can get all info from the first page so you don't have to read the whole thread to solve an already solved problem or read about an application.
Cooking your Splash Screen
Once again many thanks to all who helped me papamopps who is a great teacher and will have you laughing as he teaches. I am sure all his students love him for his humor. And it was his idea for me to start this whole thread here. zcink who always quietly finds his solution and will always share. Dutty for his wonderful nbhtool as his work is legendary already. Dark Simpson for his htc rom tool. And all the others who helped me learn and the noobs who got me searching for answers.
And last but surely not least ivanmmj Who started this thread and brought this to our attention. Also ttran001 who wrote the original how to, all I am doing is making it easier for people to use and supplying all the files.
"DOWNLOAD"
I have included a folder named "PURESKILLZZZ Splash Screen" for you to test before doing anything at all. This folder is my splash screen that I created and tested on a t-mobile wing. I have also included my image file that I used in-case you just want to go through the process before you create your won.
1.) Download all files needed. ( I made 1 download for everything. )
2.) get the picture you want to use for your splash screen.
3.) Copy the image you would like to use into the image folder.
4.) Open up the Step 1 folder and run the Replace SplashScreen.exe file.
5.) Click on Load Bitmap from the newly opened menu (Replace Artemis SPlashScreen.
6.) Click on the Update Splash button.
7.) The PDA Phone ROM Update Utility 3.0.3.1 menu will pop up. Leave it alone.
8.) Go back to the image folder for step 1 and locate the RUU_signed.nbh file.
9.) Copy the RUU_singed.nbh and place it into the RUU_signed folder.
10.) Go back and close out both PDA Phone ROM Update Utility 3.0.3.1 and Replace Artemis SplashScreen.
11.) Now go to the step 2 folder and double click on the nbhtool.exe.
12.) This will open up Dutty's good NBH tool v1.1.
13.) Click on the Decompile NBH file button.
14.) Browse back to the RUU_singed folder and locate the new RUU_signed.nbh file.
15.) Choose the same location or the one of your choosing to save the extract files.
16.) Once completed it will extract a new file called PrimarySplash.nb, this is your new Splash replacement file.
17.) OK now goto folder step 3.
18.) Open htcrt.exe file ( this is the HTC_ROM_Tool. )
19.) The htc rom tool screen will popup.
20.) Click on the Build! button.
21.) On this screen click on the box under the Device: to select your device type.
22.) Choose Herald
23.) Type in your version of the rom, example: 4.10.0002. (Thats what I used)
24.) Click on the box Splash 1 to choose your PrimarySplash.nb file
25.) Click on the Build ROM botton.
26.) The save to screen will open
27.) Save "ruu_signed" in the folder "step 4"
28.) OK ... Now we have a nbh file in the folder ready to flash
29.) Goto folder step 4 where you can flash your splash screen.
30.) Any questions just ask........
Will love to try it out, Thanks
snowbreeze said:
Will love to try it out, Thanks
Click to expand...
Click to collapse
You are welcome ....
PURESKILLZZZ said:
Cooking your Splash Screen
23.) Type in your version of the rom, example: 4.10.0002. (Thats what I used)
24.) Click on the box Splash 1 to choose your PrimarySplash.nb file
25.) Click on the Build ROM botton.
30.) Any questions just ask........
Click to expand...
Click to collapse
My Setttings -> Device Information -> shows ROM version as 4.17.405.2 WWE
what should I be entering?
Previously, when my device was a boxed-product it used to display the IPL, SPL on booting up, but after upgrading using the help found here, it only shows me the htc screen and I can only check the IPL/SPL if I go to the boot loader mode. The htcrom tool shows some options on the right side. Would entering the values there provide the values for IPL/SPL on booting?
How do I select the PrimarySplash.nb file? There is no selection box available. N checkin again, I see that nothing can be edited in the boxes on the right.
EDIT: Didn't realize that those were buttons next to the text boxes, so the 3rd question is answered. The first 2 remain...
regards
Prashant
sprashant123 said:
My Setttings -> Device Information -> shows ROM version as 4.17.405.2 WWE
what should I be entering?
Previously, when my device was a boxed-product it used to display the IPL, SPL on booting up, but after upgrading using the help found here, it only shows me the htc screen and I can only check the IPL/SPL if I go to the boot loader mode. The htcrom tool shows some options on the right side. Would entering the values there provide the values for IPL/SPL on booting?
How do I select the PrimarySplash.nb file? There is no selection box available. N checkin again, I see that nothing can be edited in the boxes on the right.
EDIT: Didn't realize that those were buttons next to the text boxes, so the 3rd question is answered. The first 2 remain...
regards
Prashant
Click to expand...
Click to collapse
Enter the numbers as you see them . But to see if you can use them as they are flash the included splash screen . If it works you can use same number as me. for question #2 the values you want are on the bootloader screen.
It works
PURESKILLZZZ said:
Enter the numbers as you see them . But to see if you can use them as they are flash the included splash screen . If it works you can use same number as me. for question #2 the values you want are on the bootloader screen.
Click to expand...
Click to collapse
The screen worked. I now have a startup screen of Optimus Prime . The IPL/SPL however was also asking for nb files, dosen't allow to enter the values directly, so I havent tried that out. If you have an idea, do let me know.
n thanks a lot for the instructions...
regards
Prashant
sprashant123 said:
The screen worked. I now have a startup screen of Optimus Prime . The IPL/SPL however was also asking for nb files, dosen't allow to enter the values directly, so I havent tried that out. If you have an idea, do let me know.
n thanks a lot for the instructions...
regards
Prashant
Click to expand...
Click to collapse
Screenshot Please...
I am posting this info because I need some assistance in getting it to work perfectly I was hoping some of you out there may have some additional insight! thank you
Known Bugs/Issues
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
HTC SHIFT FULL PHONE
I don't think it is currently need but I have also inclued the hardsspl for CDMA
Be careful with the RealVGA bit if you haven't got an English machine - I have so I couldn't test this bit - I inferred the solution from one of Daniel's posts.
1. Reset SnapVue if you have been hacking it.
- Run Clearstorage.exe (or Settings, Clear Storage)
- Disable Wi-Fi in Vista (Communication Manager)
- Enable Modem
2. Get Access to WM6
- In SnapVue, click Outlook E-mail
- Click Menu,New
- Click Menu,New,Insert Picture
- Where it says "My Pictures", click and navigate to "Windows" directory
- Highlight (using arrow keys) the "Start Menu" directory and copy it (using ctrl-c)
- Navigate into "Settings" directory in "Windows" and paste (ctrl-v). Ignore the calendar error.
- Click Ok and go back to SnapVue.
- Click Settings button and then "Start Menu, Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Using "Tools, Folder Options" (alt T,O), click on the View tab and make sure that "Hide protected operating system files (Recommended)" is NOT enabled.
- Copy "RegistryEditor.exe" to "Pocket_PC,"\" directory.
- Still on Vista side, Using "Communication Manager", Click "Advanced Settings" and then "Reset Snapvue". Click OK.
- Switch to snapvue and wait for it to start up. If you miss the warning to allow running "RegistryEditor.exe", don't worry - click setting, Start Menu, Programs, File Explorer, then navigate to Windows, StartUp and run it from there.
- In RegistryEditor.exe, navigate to HKEY_LOCAL_MACHINE, Services. Delete the "SnapVue" entry. Click and hold the "SnapVue" entry until the context-sensitive menu appears, then select delete.
- Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
- Close RegistryEditor.exe.
- In File Explorer, delete the PKG.exe and BlockTitleBar.exe files from the Windows\StartUp directory.
- Switch back to Vista and reset snapvue from Communications Manager's Advanced Settings.
- Switch back to SnapVue. When it has finished starting up and you have closed RegistryEditor, you will notice that you have the start menu at the top left of the screen.
- Tidy up - reset and delete "Start Menu" from the "Windows, Settings" directory
Pat yourself on the back! You have successfully converted the HTC shift's SnapVue to WM6.
2a. Enable all the hidden "Today" items
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- In Vista, install and run ceregedit_setup.exe
- Press F1 to connect to WM6
- Use Tools, Unlock Registry to enable the import
- Use Edit, Import to import "today.reg". Ignore any errors.
- Close ceregedit
- Switch to WM6
- In "Start Menu, Settings, Today, Items", pick the today items you want to display.
3. Change the display resolution to 96 dpi (BE SURE THAT THE CHECK BOX FOR DISABLE PHONE SKIN IS CHECKED)
A word of warning - this version of RealVGA is English and does not work very well with non-English systems.
- If you have a non-English version of the Shift, then you will not have a directory called \Windows\StartUp. Before doing the rest of this section, you should create a "StartUp" directory in your Windows directory and copy all of the files from your language equivalent of StartUp.
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Copy "RealVGA_11.CAB" and "ResPack96dpi.ARM.CAB" to "Pocket_PC,"\" directory.
- Switch over to WM6
- From File Explorer (Start Menu, Programs, File Explorer), navigate to the top directory (using Up button as necessary)
- Install RealVGA_11.CAB accepting the security warning
- Install ResPack96dpi.ARM.CAB accepting the security warning and select ok to restart the system
- Run RealVGA from Start Menu, Programs
- Change to 96dpi and press OK and wait while the system restarts
- Tidy up - Using "Start Menu, Settings, System, Remove Programs" remove WM6_RealVGA (its job is done)
- In File Explorer, delete the 2 CAB files.
hkey_local_machine\system\state\phone
block voice MO call Change Registry from 1 to 0
CONGRATULATIONS!!!!!
Voice Calls are now enabled with working mic and speaker through headset also speaker phone works
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
Side Note: you may want to also adjust these entrys as well
these will give you access to the phones menu options
hkeylm\software\oem\phonesetting
change all keys that begin with hidden from 1 to 0
hkeylm\controlpanel\phone
delete the Redirect key
Here's a link for everything you need
http://rapidshare.com/files/236022979/CDMA_Shift_Phone.rar.html
http://rapidshare.com/files/210940637/CDMA_Shift_Phone.rar.html
'This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.'
Link is down. Only ten downloads till it expired. Please post to a premium rapidshare account or send the download link again and I will post for you.
link has been updated
cybericebyte said:
link has been updated
Click to expand...
Click to collapse
Thanks much, downloading now !
Trashed Snapvue
I ran the CustomRuu from the zip file you posted, and managed to get into a loop where Windows Mobile will not boot. I can get into the bootloader with tools I downloaded on XDA, but have not found a ROM that will install without an error. Do you have a CDMA compatible ROM or even the original ROM that comes with the device. Will dive into the box to see whats on the disks next.
Need help though.
the orginal rom should be included in the zip folder
ShiftCDMAFLASH is the folder that I flashed (successfully) that left me in bootloader (three color screen).
RUUNBh is in the upper middle of the screen
CLI 0200
SPL 0.14.000
appear below, and USB in a white box appears below that.
The ShiftCDMAFLASH.zip file contains a different nbh rom file from the folder above, but I cannot get past 0% on the loader screen. I have used ecshift.exe -bl to get back in bootloader mode and hard resetted the Windows mobiel side, but no luck yet. Any suggestions ? +
just give it time
The 0.19 nbh file give a 262 error
On the other hand I can flash the 1.14.651.1 Rom with no trouble but I reboot (even after a hard reset) into the tri color screen with USB on the screen as listed above. Stalled in this mode.
Any other options ? or roms that might work. The GSM roms on XDA also crash out so I am locked in the 1.14.651.1 bootloader mode.....grrrr.
Is there another option I am missing ? I also tried the Snapvue reset program for Vista from the HTC website
Snapvue Software version 1.14.651.1
Snapvue Software version 1.14.651.1 is the one that I installed on my CDMA shift and now cannot get out of bootloader screen (tricolor) despite hard resetting the WM side. I am able to reflash the above listed rom with no errors. But still end up in the bootloader screen.
No other posted rom on XDA will load (probably due to GSM/CDMA differences). Do you have an alternative CDMA rom I could use or is there a way to get out of the bootloader and force WM to load that I am missing ?
use mtty should be posted on site
Used mtty
Thanks. I had been usimg mtty. I can successfully hard reset but WM boots back into the tri color bootloader screen following hard reset. lol. Still stuck. Thanks for the suggestion though.
now do ecshift mode 0 then mode reset
cybericebyte said:
now do ecshift mode 0 then mode reset
Click to expand...
Click to collapse
Thanks, I have been doing all of the above. Restarts into the tricolor screen. I can reformat with the rom you provided. Still tricolor on hard reset. Something in the rom is preventing wm from loading. Anything else left to do ?
I am probably going to need to give up. The snapvue side is toast. Unless there is someone with the original CDMA Rom out there willing to post online (even HTC) I do not think I can make this work.
Original CDMA ROM
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps
rafaelc said:
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps
Click to expand...
Click to collapse
Quick response thanks. Will try it out today and post my results. I did download and reupload to rapidshare. Here is the link.....
http://rapidshare.com/files/2374198....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
I hope CMONEX is okay with that.
Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.
nmhusa said:
Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.
Click to expand...
Click to collapse
Excelent!
you are right, but that kind o things is part of the learning process
Thanks again for all the help.
Also managed to fix the Font sizes in Snapue via registry edits so that they increase in proportion to the scaled screen resolution with RealVGA. Until I figure out how to HardSPL the CDMA Shift and cook a custom rom, this will have to do.