Database Develop

Need TouchFlo.exe from Windows dir (ver. 2.3) Please Help!

Hey experts
I downloaded and installed TylerC161 compiliation of Touch-it 2.3 (clean, see this thread) with TouchFLo, but after installing successfully, I still can't get the cube to appear. I had the version 2 before and I simply assigned TouchFlo to one of the buttons. The TouchFlo application or shortcut was installed in Programs/TouchFlo folder. After installing this version, I don't see the TouchFlo in that folder (only TF Setting and TouchSetting), nor do i see it anywhere in the Button Settings. Am I missing something? I only found a shortcut file in the Windows directory. But copy/paste that didn't solve. My question is can someone with working Version 2.3 upload TouchFlo.exe file from Windows directory for me so I can copy it where it is supposed to go? Or do I need to reflash and re-install? Thanks!
I tried Touch-It 2.3 fix.cab but that didn't solve it! Any ideas?! Please?!

you must select your method of cube activation in TFsettings i believe. Its one of those choices.

fzzyrn said:
you must select your method of cube activation in TFsettings i believe. Its one of those choices.
Click to expand...
Click to collapse
I did that, and it still didn't create TouchFLO icon or gave me an option in the Buttons! Very strange!
I even tried another Flash from Genuine RUU, and still the same thing! Please help, anyone?

coolmen777 said:
I did that, and it still didn't create TouchFLO icon or gave me an option in the Buttons! Very strange!
I even tried another Flash from Genuine RUU, and still the same thing! Please help, anyone?
Click to expand...
Click to collapse
Once you select an option in TFsetting, you need to reset the device.
There will not be any buttons to start touchflo, just the option that you selected, meaning either sliding your finger from the top of the screen to the bottom or center to bottom, and etc.

ttran001 said:
Once you select an option in TFsetting, you need to reset the device.
There will not be any buttons to start touchflo, just the option that you selected, meaning either sliding your finger from the top of the screen to the bottom or center to bottom, and etc.
Click to expand...
Click to collapse
Never Mind, it is working! Great job, man, I must have flashed like 5 times... THANKS A LOT!

start menu

how do i clear the list of previously used programs as my start list seems to be overloading itself
i get it open once ok then open and its all white ands then i have to scroll forever to find the thing i want

Hi, there is an option in Kaiser Tweaks from Chainfire that does clears the start menu:
Download the KaiserTweak.exe from Chainfires thread:
http://forum.xda-developers.com/showthread.php?t=333898
Get the newest Kaisertweak.xml from Nikagls thread:
http://forum.xda-developers.com/showthread.php?t=349009
Copy both files on your storage card e.g. in Program Files\KaiserTweak and run the exe: Go down the tweak list to Tools / Empty Start Menu, enable it and do a soft reset.
And there are alot of other great tweaks in this program, very easy to use. Be aware many tweaks need a soft reset afterwards to work.
!!! Many thanks to Chainfire and Nikagl !!!
Greetz,
Hans Olo

yeah i was hoping i could do that without installing something else as i think HTC plus created the problem in the first place

Hmm, I never heard of the start menu entry for previously used programs can overload itself. Mine has a maximum of 6 entries and the oldest entry gets overwritten by the newest. Sorry, seems I cannot help you with that overload issue, but I am sure there will be someone in this great forum.
Nevertheless, give KaiserTweak a try. It don't has to be installed (just copied) and it is a tool to easily optimize registry settings. A must have in my opinion, but of course it's to you... ;-)
Hans Olo

I took it a step further and manually hard reset the device clearing all the data and resetting everything
I did not have much on it, plus everything is backed up anyway.
All sorted now.

Calligrapher 8.6

I have Tytn II with L26_Kaiser_Diamond_V5 (Hybrid 3.29.707) Rom.
Installed Calligrapher 8.6 and unable to select either writeanywhere or writepad from the SIP menu or by anyother means. In short after installing calligrapher and softresetting i am not able to use it.
Can anyone please help

Don't know if it will work or not but, you might try installing the Default_IM_WM5.cab or SipChange.cab and see if one of them will let you select it.

no success
^^ Solution -- not working

Assuming-
1. you installed with the desktop loader EXE
2. you had an active ActiveSync session and your phone was properly connected and
3. you selected to have both Write Anywhere and Write Pad SIPs selected when finalizing install to PPC
You should have entries for both in the SIP and a folder under programs with the EXEs. If you cannot find any of this you haven't properly installed the program.
Reconnect your phone and make sure you have an active Sync session, run the setup EXE from your desktop and follow the instructions that appear on your screen. (See pic)

Yes of course
The program was installed from the desktop pc and softreset was done. Both writeanywhere and writepads are installed and it is shown on the list of SIPs (when we click small arrow near the keyboard icon) but unable to select them. I am able to access the options menu of calligrapher from Start>settings>system>calligrapher.

ok now do this
http://forum.xda-developers.com/showthread.php?t=301433

Please see the image
boomermax
I had done that yesterday itself but the problem is menu showsup faster but unable to select writeanywhere or writepad.

so basically I've been no help at all...LOL
I'm sure you've uninstalled and reinstalled and have probably have redownloaded a fresh copy and tried installing that...
what happens when you select it from programs? Nothing?

Reinstalled
Reinstalled few times, when i select from programs nothing happens adn i don't know is it the problem of the L26 ROM or Windows 6.1 or the Calligrapher 8.6 --
if some one can help i will be grateful
Earlier also there was some problem without a solution for someone
http://forum.xda-developers.com/showthread.php?t=353077

try disabling the cube if you have it. I had this problem with transcriber, worked after I disabled the cube.

NO CUBE
I don't have cube but transcriber is working perfect only i have problem with calligrapher

still probably no help
have you tried having the installer remove transcriber from SIP during install?

Yes of course
Even without transcriber calligrapher will not work.

what if you tried this sequence and substituted calligrapher for the keyboard install?
http://forum.xda-developers.com/showpost.php?p=2271142&postcount=692
Phatware states calligrapher doesn't play well with third party apps that affect touch screen behavior and that is probably the problem here

not yet
^^ done without success

posted in another forum in reference to SIP troubles and Calligrapher...
"The main difference between CalliGrapher 8.6 and all previous versions is that it has been compiled with recently released Microsoft Visual Studio 2008. It is remotely possible that the new compiler has performance issues, but we have not heard anything about this and have not seen any evidence in our internal tests. The only difference that we’ve noticed when using the new development tool is that size of the compiled binary files slightly increased.
We will continue testing and will post additional information if we have any. "
Maybe trying previous version might help.
Also, taking the logic from this thread http://forum.xda-developers.com/showthread.php?t=398091 it might serve you to start from scratch and reload ROM then tackle this calligrapher issue then move on to loading other applications.

Partially success - Hard reset
I have done a hard reset.
installed first the calligrapher 8.6
soft reset
installed default_im_cab
changed sip through default_im_cab as writeanywhere
soft reset
Now writeanywhere is available and working in all applications except for Lexisgoo dictionary 3.1.1
Any help or suggesstions?

Wm 6.1 roms

Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]

BEATTWEAKER said:
Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]
Click to expand...
Click to collapse
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?

All of your questions are answered inside
refuse2bstopped said:
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?
Click to expand...
Click to collapse
I have been using this rom for a couple of weeks now and I have just discovered once I reflashed it I have seemed to fix the only error that was found...
here is a posting that will give some info and hopefully answer alot of your current questions..
Default FAQ
FAQ Section:
Read everything in this section before downloading the roms and flashing.
If you don't understand it, read it again and again until you understand.
Once your done flashing your device double check back here again to configure your device.
I will not reply to any subjects already covered in this section.
I'm not trying to be rude, I'm just very busy with finishing up this project and also working on other projects.
Back up your phone before downloading and flashing this rom... I do not want anybody to loose their data due to flashing this rom, as the rom will erase all of your data...
How To Flash Rom
HERALD-USPL-beta3 - posted by tiksister - rapidshare
How-To Flash the HERALD-USPL-beta3:
Download and extract both files.
Place the extracted OTP v7.1.nbh into the Herald-uspl-beta3/RUU folder.
Move the entire Herald-uspl-beta3 folder to the root of the c:\.
Follow the simple readme file.
Break down of how to flash this rom:
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Instructions by Ivanmmj
===================================
If your device is already HARD-SPL read the following link before flashing.
HARD-SPL
======================
Disable Random Access and Enable Scrolling
With random access you must do the following to enable contact scrolling.
Click on the contacts button at the lower right hand side of the screen.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
Now I know the following will sound strange but it will enable scrolling in the contact menu.
Repeat the following steps again, and the random acess bar on the right handside will go away and scrolling will work again.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
If you want to enable random access, just go back and uncheck the "Show alphabetical index"
======================
How to turn off QuickMenu
/Start/QuickMenu/Exit
It will prompt you with "Exit QuickMenu?
Choose yes and it will not startup again even after a reboot.
Things to do after flashing your device:
Network Wizard
Go to \Start\Settings\Connections\Network Wizard
Choose your location and provider, do not reset the device when prompted.
Connections
Go to \Start\Settings\Connections\Connections
Once completed save and exit
Video on how to setup your device after flashing
MMS/SMS Setup
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: sendlimit3 which will be set to the default of 300k. u gotta change it to 1228800 and than the 1200k will appear.
note u can also change sendlimit 2, 1 to be the same as what ever u decide to change wap * sendlimt* to be. once u do this the 1200k will appear.
++++in between doing the above and below, u have to go to
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
=======================
Soft Keys
The calendar and contacts keys can be changed with the following steps.
/Settings/soft keys
Use this setting feature to change to what every programs you want.
========================
Show CIM contacts
By default it has been disabled so your CIM contacts will not display, use the following reg hacks to enable it.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSIM"=dword:00000001
=========================
Show clock instead of battery
If you want to show the clock instead of the battery or the other way around, use the following reg hack.
Clock
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:0
Change the current dword:0 to 1.
Battery
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:1
Change the current dword:1 to 0.
==========================
M2DC
Just tried the M2DC theme manager on 7.3 Std, with a renamed .zip file to .m2dct file (specifically the KnobiSkin from the M2D skin thread).
First time, it locked up. M2DC continued with spinning icon until I forced a reboot. Touchflo was off after reboot, and after enabling it everything appeared to be the same.
Second attempt, I disabled Touchflo from today before applying the new theme. Got the "Applying Theme" prompt. After M2DC closed, I reactivated touchflow and new theme was applied.
Simple instruction for use of M2DC Themes on OTP 7.3:
Find a skin you like, download the zip file (not the cab),
Rename file to .m2dct,
Copy new file to the themes directory of the M2DC install directory,
Disable touchflo in Today settings
Start M2DC,
Go to themes tab (the first time it will back up the default theme),
Click the new theme then apply,
Restart touchflo.
Alternate for creating themes from skin CABs:
Run M2DC first, let it make the DefaultThemeBackup.m2dct file, Close M2DC.
Run the CAB skin of choice.
Rename DefaultThemeBackup.m2dct to OriginalTheme.m2dct (or anything else with same extension).
Rerun M2DC. It will detect no DefaultThemeBackup.m2dct and will ask to back up again. Let it make new backup. Close M2DC.
Rename new file to the name of the new theme.
Repeat for each skin CAB you wish to convert to m2dc theme file.
Note: The M2DCT files can be large (over 3Mb, 660 files backed up). Best to do this only if M2DC is installed on a large Storage card.
Note 2: Several times M2DC appeared to freeze when applying or backing up themes. It looks like it has problems if touchflo is not off prior to running. It does try to deactivate touchFlo then reactivate when done, but it doesn't appear to work flawlessly yet. It is better to deactivate the Today plugin before running M2DC on this ROM build.
__________________
This mirror pretty much has all roms from version 7.0 - 7.7 which is the most current.
http://www.evolvers.net/Herald_Roms/
Here is one link that has some pretty useful items in it also:
http://forum.xda-developers.com/showthread.php?t=341867
thanks to all of the developers and cooks on XDA for without you guys none of this would be possible

App/cab for soft reset

I heard of it... does anyone has it?...
...ok found practical solution, sktools has that option...

You don't need sktools. Soft-reset is already available in settings. You just need to make a short cut in the home screen. That's it.
Cheers!

This one works for my omnia2

What about just a long press of the end call button? powers down my Omnia II which is a soft reset.

need a skin more finger friendly for PsShutXP ?
Defaut=
********************************
Blue=
Download
********************************
TouchPro2=
Download
********************************
Dusk= NEW
Download
********************************
Add this 2 files in PROGRAM FILES/PsshutXP/
(owerwrite if asked)
For back to defaut, just delete this 2 files...
Enjoy

abdelrahim said:
This one works for my omnia2
Click to expand...
Click to collapse
That is awesome and just what I was looking for Thanks for posting.
OOO and I noticed nice little extras like screen off and lock is included.

Stormglider said:
You don't need sktools. Soft-reset is already available in settings. You just need to make a short cut in the home screen. That's it.
Cheers!
Click to expand...
Click to collapse
@Stormglider - I looked through every option in the Settings (both MS and Samsung), searched the forum and Google, and could not find the Menu command to soft-reset the Omnia.
I have an i8000L from Bell Canada with the stock rom. What do you use, and what is the exact click sequence you do to execute the soft reset? (I prefer to not install unneeded software if I can avoid it).
Thanks

thx for u share this application...this is my first post joint this forum..

bobzo said:
@Stormglider - I looked through every option in the Settings (both MS and Samsung), searched the forum and Google, and could not find the Menu command to soft-reset the Omnia.
I have an i8000L from Bell Canada with the stock rom. What do you use, and what is the exact click sequence you do to execute the soft reset? (I prefer to not install unneeded software if I can avoid it).
Thanks
Click to expand...
Click to collapse
bob, just press hold the end call button. phone will shut down which is the same as a soft reset. No need for a cab or proggie or shortcut. running a Bell Omnia as well.

Try this application.

thx
it's working thanks bozzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

Thank you very very much

LeTo08 said:
need a skin more finger friendly for PsShutXP ?
Defaut=
********************************
Blue=
Download
********************************
TouchPro2=
Download
********************************
Dusk= NEW
Download
********************************
Add this 2 files in PROGRAM FILES/PsshutXP/
(owerwrite if asked)
For back to defaut, just delete this 2 files...
Enjoy
Click to expand...
Click to collapse
Thanks