i'm new to this so don't burn me
i just downgraded my 8125 to 1.08, i unlocked the sim/cid
then upgraded to cincular 2.26 aku2.3 by shogunmark, but the ipl is still 1.08???
so what am i doing worng?
thanks in advance !
IPL left out of rom
flashing the wrong ipl will brick a device eg. (ipl 2.26.0001 --->G3 device-->Brick)
the 2.26 cingular rom might not update your ipl try another rom like molski 30mb then reflash to 2.26 cingular rom ! post your findings
its not a g4, its a g3
its has been working since the upgrade, so would i be safe to load the latest rom by molski...thanks LMK
ok, upgrade to molski rom was success
is there a way to remove task manager from the bottom right and bring back the battery status, also are ther any skins to the dial pad. one more question can u customize the desktop like remove things i won't be using...thanks for all ur help!
Related
When I had flashed over to Summiter's Cingular AKU 2.3 + CF2 Test 2 package, I had let it do the upgrade and came back after the installation of the image finished with the phone rebooted.
I never got a chance to glance at the boot-up screen until just a moment ago and noticed that the IPL and SPL read as the following...
IPL: 2.24
SPL: 2.26
My phone is CID Unlocked and also SIM unlocked from the downgrade/lokwiz/upgrade/flash tutorial and in addition I do know that Summiter has not been around. I just wanted to see if anyone out there is using Summiter's ROM and noticed this.
I have just reflashed to Molski's Clean ROM and the IPL & SPL now read 2.26 for both, in fears of the phone bricking for those wondering.
What's your question?
Hi Miata. I'm not quite sure what you are asking.
I was just wondering if anyone is using Summiter's Cingular Clean ROM and if they are... Did they notice that the IPL and SPL are different?
I wouldn't want anyone else to brick their phones.
The last custom rom I used was the same Summiter rom. I went directly from that rom to Molski's 30 MB Rev 3 Rom on my CID/SIM unlocked G3 8125 with no problems.
my current numbers
IPL 2.26
SPL 2.26
GMS 02.47.11
OS 2.26.10.2
All with no problems
After upgrading to Molski's 30mb Clean ROM, my IPL and SPL fixed themselves thankfully to 2.26. Just trying to double check if I was seeing things or not, because it would be a shame for someone to brick their phone just simply because they need the Cingular settings in a custom ROM.
deathMiata said:
After upgrading to Molski's 30mb Clean ROM, my IPL and SPL fixed themselves thankfully to 2.26. Just trying to double check if I was seeing things or not, because it would be a shame for someone to brick their phone just simply because they need the Cingular settings in a custom ROM.
Click to expand...
Click to collapse
If you just needed the Cingular GPRS and MMS settings you can get that in any rom... There are threads that have all of the Cingular settings integrated into CAB files.
See HERE
Page 1 has the MMS settings files, Page 3 has the GPRS/EDGE settings files
Im having problems upgrading my qtek 9100 g3 pda to a new rom, specifically, the leaked wm6 wwe.
Currently:
IPL 1.01
SPL 2.17
GSM 02.25.11
OS 3.3.0.0
I have tried going straight to the wm6 rom but vista says the program has stopped responding. I have also tried reverting to buttons 1.05 ROM, with the same result.
Lastly, I tried reverting to the T-mobile 2.26 ROM, but this doesnt work either.
I am at a loss now, any suggestions would be greatly appreciated.
Thanks
From the sticky:
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
try doing it on a machine that isnt running Vista
1-15. Done
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
when i try this I can't get the SPL to go back, IPL is fine, but i've tried 4 sucessive times, no chance..
I then tried this :-
Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me )
that went ok, and then I tried flashing roms, but the only one I can get to work is the Wizzard Love ROM.
I'd love to run WM6 but i can't, if i try the other ROMS they flash ok, but I just go back to the Wizzard ROM when it reloads
any ideas ?
very many thanks, Will
Will_Plaice said:
1-15. Done
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
when i try this I can't get the SPL to go back, IPL is fine, but i've tried 4 sucessive times, no chance..
I then tried this :-
Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me )
that went ok, and then I tried flashing roms, but the only one I can get to work is the Wizzard Love ROM.
I'd love to run WM6 but i can't, if i try the other ROMS they flash ok, but I just go back to the Wizzard ROM when it reloads
any ideas ?
very many thanks, Will
Click to expand...
Click to collapse
"17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with."
'Now you SHOULD have a IPL and SPL of 2.26 to work with. If not, you screwed up! Don't attempt to install someone's hard work and ***** before you do these steps!'
EDIT for Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me
Well,
You missed the all important step 17,flashing the T-mobile 2.26,this cud have given you solid IPL/SPL 2.26 to work on,Instead opted for Edit to step 17,flashing 3.08.
Your device is not CID unlocked,download WST tool and check the status of your phone,
secondly you shudn't have upgraded your ipl/spl to 3.08,till you were sure your phone is cid unlock and both the ipl/spl are the same.
anyway download the wst tool to check your phone's status and post the report here,
bugger...
i tried another rom and am stuck in the bootloader...
i have 3.08 for IPL and SPL
I think the WST will not work from the bootloader (and i can't find it to download)
any further sugestions ?
I have tried both the t-mobile and button roms
tia will try not to do any more damage ;-)
Will_Plaice said:
bugger...
i tried another rom and am stuck in the bootloader...
i have 3.08 for IPL and SPL
I think the WST will not work from the bootloader (and i can't find it to download)
any further sugestions ?
I have tried both the t-mobile and button roms
tia will try not to do any more damage ;-)
Click to expand...
Click to collapse
In this particular situation no rom will flash,the only option is to get the IPL/SPL back to 1.xx,only than you can unlock.
If you are in boot loader,try to flash buttons 1.05 again,if worked,ok. otherwise download the latest official rom from the carriers site and flash,it will work and bring back your phone in working status.then flash button's 1.05 to unlock with lokiwiz02b.
Are you having any sdcard in your phone,remove it,it'll help,sometimes sdcard freezes the boot loader,by removing it,boot loader mode is released,good luck
many thanks, i came across a IPL SPL 2.26 only ROM and this I managed to get to flash, and with your advise I now have WM6
thanks, Will
Will_Plaice said:
many thanks, i came across a IPL SPL 2.26 only ROM and this I managed to get to flash, and with your advise I now have WM6
thanks, Will
Click to expand...
Click to collapse
THANKS
Glade it's up and running
Hi,
I have a O2 Mini S with black diamond 3.1 installed i would like to upgrade my IPL SPL from 1.05 to 3.08, I am asking this as some time back i had upgraded my radio rom to 2.71.xxx & had to reinstall the OS again after doing so..
any helps appreciated.
Thanks in advance
for me, the following worked:
- downgraded to WM5 AKU2 according to the description shown in all WM6 release threads
- updated the thing with the latest T-Mobile update
- re-flashed the OS partition (via pdocwrite.exe, you can use "shelltool" or whatever other names they gave for their wrappers). but the typho5/nb2nbf couple just does as well. only remember to leave out the unnecessary ipl/spl and not to flash the G4 one by accident. or leave out those entirely, it wont harm since you should already have a 3.08 SPL (and probably IPL) at that point.
i have an i-mate that was flashed with a custom rom in an unofficial service center with an ipl / spl 2.17 , i need to restore it to official i-mate k-jam rom which is 2.16 however the updater utility states its unability (probably due to spl reported to be higher than rom) is there a way i can bypass that or even downgrade spl ?
If you have a G4 phone. Try this unremove HardSPL trick to change the IPL/SPL in your phone. This is how I have gone from 2.25.0001 to 2.26.0001 to 3.08.0001 in my phone.
You will need to find the IPL/SPL you want. Be careful about G3 versus G4 versions.
http://forum.xda-developers.com/showthread.php?t=342744
If your phone is G3 someone else will need to help you.
thank u , its a g3 and i could help myself by installing button rom , later i had a problem where it downgraded ipl but not spl , finaly i realised they neglected to mention one thing .... u need to restart after installing rapi before cid unlocking , and then reinstall button rom