Hy
I've upgraded my Vario with Molski ROM, and I've got a problem.
Everything is working excellent, but I can't see the numbers that I'm dialling.
The dialler is working, and I can call the number, but when I'm pressing numbers, they are not aperaing in the uper left corner as usual...
Please help, I'm new in this, and this is not something small...
thanks
Greetings from Croatia!
I solved the problem by instaling other dialer skin...
But I'm note sure why this problem came up in the first place
Related
Hi Guys!
(Sorry for my Bad English, but im German )
I have a really annoying Problem with my HTC TyTN II !!!
My Kaiser is always pluged to the Sync- or Charge-Cable on my Desk. It's also slided up, so i can see the Display all the time.
If there is a incomming Call and i'll slide down the Kaiser, the Call will be Canceled!!!
When i unplug it from the Charge- or Sync-Cable the Phone Call will also canceled!!
I've wrote a eMail to the HTC Support 4 weeks ago, but no answer till today...
Is there a Way to solve this issue?! Maybe a Registry Hack or something?!?
Thx alot!
Greetz,
infernalshade
with the slide problem that isnt a fault as far as im aware as it happens to me (I must admit that it is a bit annoying)
Uhm OK...
Then there is no way to fix it?
I just tried to reproduce these issues with my Tilt, and I could not.
When I slid open-and-up my Tilt and then called it, I was able to slide it closed and back to normal with my phone still ringing. I then repeated the steps with it plugged into USB, and still no problem.
Are you still running a stock (unmodified) ROM? I am running a cooked WM 6.1 ROM, and that could be the solution. I only have access to 1 Tilt, so I cannot test the symptoms with a WM6 ROM.
I have the Original ROM...and i think i don't want to cook my ROM...
Uhm...now i reproduced the Problem again and now it works
Strange!
But thx for help
Hello everybody,
First, sorry if I make mistakes I'm French.
My Diamond worked perfectly, until yesterday... Now it doesn't want to ring anymore when someone calls me. It vibrates, the screen turns on, but that's all. They're is absolutly no reason, since it is obviously not in "vibrating mode" (sorry I don't know how to say in english :s)
Please help me! What can I check (for example with phm registry editor)?
Many thanks.
In the TouchFlow 3D home screen "slide" to the Settings tab, the click on "Sound". At the bottom of the screen there is a volume control. It is probably set to "0" since you get no ring signal. Change it to 80% or something
jeah, ive got the same probs, just try it like said up there, or try softkeys on the left side or just suftreset
my probs had gone as i made a softreset
Thanks but I've already checked all settings. That's why I say there is no reason it doesn't ring.
I had a similar problem running one of the cooked roms, it was fine for a few days then all of a sudden it wouldnt ring. There was still sound when I played music etc just no audio for the ring, I checked all settings too. I ended up reflashing with a different rom which solved the problem.
Many thanks wilkewhaq.
My PC died 2 days ago, that's why I'm no longer able to flash my Diamond, so I have to buy a new one, and I'll flash it -_-
I flashed with belite 0.95 yesterday, it solved the issue, but today, it starts again.. -_-
Do you think it could work (more than one day...) with an other rom? I don't think it's due to my Diamond...
Thanks.
I had a similar problem. But I changed my ring tone and later on it is working. Perhaps check 'system volume' or 'Ring volume'.
Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
DanGlee said:
Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
Click to expand...
Click to collapse
yes, I'm experiencing the same thing too and I'm using the official 1.93 rom.
as far as I know, it doesn't only affect private call and the problem is very random.
What I notice is the phone will keep ringing until you press any button or the touchscreen to answer or mute the call and that's the time the phone will drop the call....hoping to find solution too....
I had the same problem with the HTC 1.93 ROM. Changing radios made no difference. Switched to Swift v5.6 and all is OK. BTW am in UK on Orange.
even with 1.37 rom, i'm also having the problem....wonder does anyone know what's the problem and solution....
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
vibecatalin said:
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
Click to expand...
Click to collapse
hmm....I didn't mess with that delay at all but still the problem is there...
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Yeah, thats exactly it I think... because its always in my pocket, but I have the HTC case, which by the time I've either take it out of my pocket or out of the case, the call has gone!
Does anybody have a link for that app s2u2.
I will try this... because I tried changing the ringer settings and all sorts, and nothing helped! All the iPhone and N95 guys are slagging me at work! Apart from that its by far the best phone in the office
Cheers for the help!
Will report back if I find that and app if it works!
DG
http://forum.xda-developers.com/showthread.php?t=412418
Grtzzz
baraata said:
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Click to expand...
Click to collapse
definitely not due to that problem. Numerous time, my phone was not in my pocket but on the desk already. A couple of time when the phone ring, I pick it up and press the answer button(touchscreen and hardware button) but it just drop the call....haizzzz
No one else has this problem?
I'm getting exactly the same problem (I'm using the official Vodafone 1.93 ROM)...really annoying!
I am getting this problem too... anybody have a solution? Whenever a private number comes in, when i click on the answer tab, the call will just disconnect... this is very fustrating...
I also get this issue, always with a private number and sometimes with a stored number. At first I thought it was becuase I was touching the screen when I first took the phone out of my pocket but like someone else said this also happens when its on a table.
Any help would be really appreciated!!
try this forum.xda-developers.com/archive/index.php/t-258109.html
Hiya.
I have been searching for this problem for some time. Basically when i go 2 send a text, i select 1 of the touch keypads and the crappy windows keyboard stays up.grrrrr
The thing is that was 1 of many problems, so i finally got round 2 flashing my rom (with 1 of dutty's, hes a leg) and after two hours the same thing happens again
What could be doing this, or even better how do i fix this?
Please Help
Thanks
Scott
Hiya again!!!!
I got it sorted i knew as soon as i posted asking 4 help. It would fix itself.
Thanks and sorry if i wasted anybodys time
Regards
Scott
Ok mate, I have this touch keypad installed and everytime I press the spacebar too soon(before the text I just typed gets deselected) it deletes the selected text!!!
Any way to fix this? Or decrease the time the text is "selected"??
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
luisdesigns said:
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
Click to expand...
Click to collapse
Maybe if you start sharing what rom are U using My advice is that you definitely should flash another rom or reflash your stock rom to solve the issues you are experiencing. Please read the sticky of how to do it
you can reset it to factory settings (the ROM you last flashed that is) by this method:
press and hold the two upper hardware keys next to your call end and call button. While pressing and holding them do a soft reset. A white screen with blue text should come up. Press the green call button and wait for it to reach the screen after the percentage screen. Then press the green call button again and it will be like it first was out of the box (or when you flashed a ROM).
Kaiser tytn II
The soft reset that exactly what i did and that´s what screwed up my kaiser , i am going to re-flash it , i will look on how to do it and will have a try.
ok, one slight problem, i have a macbook all i find is for pc
luisdesigns said:
ok, one slight problem, i have a macbook all i find is for pc
Click to expand...
Click to collapse
You'll either have to create a partition and install windows on it or flash via sd card. Link here to get you started:
http://forum.xda-developers.com/showthread.php?t=433835
thank you so much, i will try it this evening from my pc hope it fixes the issue. Will let you know