Hello everybody,
First, sorry if I make mistakes I'm French.
My Diamond worked perfectly, until yesterday... Now it doesn't want to ring anymore when someone calls me. It vibrates, the screen turns on, but that's all. They're is absolutly no reason, since it is obviously not in "vibrating mode" (sorry I don't know how to say in english :s)
Please help me! What can I check (for example with phm registry editor)?
Many thanks.
In the TouchFlow 3D home screen "slide" to the Settings tab, the click on "Sound". At the bottom of the screen there is a volume control. It is probably set to "0" since you get no ring signal. Change it to 80% or something
jeah, ive got the same probs, just try it like said up there, or try softkeys on the left side or just suftreset
my probs had gone as i made a softreset
Thanks but I've already checked all settings. That's why I say there is no reason it doesn't ring.
I had a similar problem running one of the cooked roms, it was fine for a few days then all of a sudden it wouldnt ring. There was still sound when I played music etc just no audio for the ring, I checked all settings too. I ended up reflashing with a different rom which solved the problem.
Many thanks wilkewhaq.
My PC died 2 days ago, that's why I'm no longer able to flash my Diamond, so I have to buy a new one, and I'll flash it -_-
I flashed with belite 0.95 yesterday, it solved the issue, but today, it starts again.. -_-
Do you think it could work (more than one day...) with an other rom? I don't think it's due to my Diamond...
Thanks.
I had a similar problem. But I changed my ring tone and later on it is working. Perhaps check 'system volume' or 'Ring volume'.
Related
Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
DanGlee said:
Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
Click to expand...
Click to collapse
yes, I'm experiencing the same thing too and I'm using the official 1.93 rom.
as far as I know, it doesn't only affect private call and the problem is very random.
What I notice is the phone will keep ringing until you press any button or the touchscreen to answer or mute the call and that's the time the phone will drop the call....hoping to find solution too....
I had the same problem with the HTC 1.93 ROM. Changing radios made no difference. Switched to Swift v5.6 and all is OK. BTW am in UK on Orange.
even with 1.37 rom, i'm also having the problem....wonder does anyone know what's the problem and solution....
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
vibecatalin said:
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
Click to expand...
Click to collapse
hmm....I didn't mess with that delay at all but still the problem is there...
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Yeah, thats exactly it I think... because its always in my pocket, but I have the HTC case, which by the time I've either take it out of my pocket or out of the case, the call has gone!
Does anybody have a link for that app s2u2.
I will try this... because I tried changing the ringer settings and all sorts, and nothing helped! All the iPhone and N95 guys are slagging me at work! Apart from that its by far the best phone in the office
Cheers for the help!
Will report back if I find that and app if it works!
DG
http://forum.xda-developers.com/showthread.php?t=412418
Grtzzz
baraata said:
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Click to expand...
Click to collapse
definitely not due to that problem. Numerous time, my phone was not in my pocket but on the desk already. A couple of time when the phone ring, I pick it up and press the answer button(touchscreen and hardware button) but it just drop the call....haizzzz
No one else has this problem?
I'm getting exactly the same problem (I'm using the official Vodafone 1.93 ROM)...really annoying!
I am getting this problem too... anybody have a solution? Whenever a private number comes in, when i click on the answer tab, the call will just disconnect... this is very fustrating...
I also get this issue, always with a private number and sometimes with a stored number. At first I thought it was becuase I was touching the screen when I first took the phone out of my pocket but like someone else said this also happens when its on a table.
Any help would be really appreciated!!
try this forum.xda-developers.com/archive/index.php/t-258109.html
I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
same problem
i have the excact same problem as you, so someone please respond
same problem
me too, absolutely no ring even after reset !!!
probably a stupid question, but have you got the profile set to automatic?
if so, it will go to silent whenever there is an appointment in your calendar.
If not, then ignore me, it was just an idea...
The profile is set to normal. I forgot to mention this. I would not ask a stupid question like that. Thanks anyway.
i have the same problem. during the day, i must restart my divece, once or twice, because my ring disapear. the microphne too, i don t hear the other person that calls me.today i went to my mobile service provider and i changed my SIM, but the problem is sthe same. i have 1.93 ROM, not cooked, is the default one. when i bought my diamond, the problem exist, when i update for the first time with the previous of 1.93 ROM, the problem wasn t.my phone was work divine.now, with 1.93, the NOT RINGING is backpls hlp me.thnx
Why don't you try a hard reset I am sure the problem will go away....
try the original rom from the htc
try to put the original htc rom 1.93 wwe and it will be work
rickturatti said:
I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
Click to expand...
Click to collapse
I have this problem but ONLY after listening to music over a bluetooth headset.
I know this maye sound silly, but when you test your phone to make sure it is going to ring, make sure the volume (buttons of side of the phone) is up full.
A few times I have been in 'normal' made, but the phone only vibrates - this is because I have somehow lowered the volume by pressing the side keys.
May save a a few blushes, you never know!
Help
Please guys, help us solve this problem. I dont know what to do anymore, and it is driving me crazy.
Thanks.
I noticed this behaviour on my Diamond last week. Not sure if it is related but I had similar problems on my old Trinity. When switching between vibrate/silent and normal sound profile Windows would not always register this correctly. Further investigation revealed the the system volume was being updated but the phone/ringer volume stayed at silent. Do you often switch between Silent and Normal?
Never got to the bottom of this on Trinity, although it did improve (happened less often) after I flashed WM6.1 over the original WM5. As there seams to be a silimar issue on Diamond I would guess that its either a WM6.1 problem or something to do with the way that HTC's profile switcher interacts with the OS.
Only thing I can suggest as that next time it happens you check the ringer volume either using the Sounds setting (Settings tab on TouchFlo) if its set to 0% then it may be the same thing.
rickturatti said:
I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
Click to expand...
Click to collapse
do you have sound setting on ring THEN vibrate? also to fix your ring lag, try diamond tweak. there is a ring without delay tweak in there.
I have the same problem. I'm on 1.37 ROM - I only noticed it recently. All other sounds play fine, and the speaker volume is correct and it's not on silent or vibrate.
Phone setting is Ring AND vibrate, but trying Ring only doesn't work either.
I'm disappointed with this phone performance though think it's the Touch Flo. I tried a 1.93 but they took out the transitions - no idea if the ring worked then or not - but it was no faster IMO.
For god's sake a phone which never rings is bloody ridiculous!
I wish I kept on the original Orange UK ROM verison....
I like the idea of a hard reset - but have zero confidence it will work. I do know it will take 30 minutes minimum to set up push mail, apps and all the other stuff again.....
I have a similar problem, posted it HERE
Sounds don't work (ring tones and MP3s), I can't hear my dialog partner and they can't hear me. It's very odd. Only switching off the phone helps. I'm very disappointed with the phone's performance.
This issue has been reported before on the Tytn II (running WM6 and WM6.1) so its not a TouchFlo problem - if you search you will see instances of it cropping up all over the place but no 'official' response from anyone or indeed any sure fire fix to stop it happening.
In some instances people are attributing it to using a Bluetooth headset; on others, bluetooth has not been used at all and it has still happened. One of our managers at work had the problem on 3 successive MDA Vario III's (Tytn II) and then has had it again on a Compact IV, all running the stock ROM.
I would suggest it is an issue inherent in Windows Mobile, although it cannot be ruled out that its only in HTC's implementation as I have not heard of it happening on other WM devices. And it is highly intermittant - it would seem that if you have a device susceptible to it, then it will happen no matter what. If you don't, then it probably won't happen ever. So that, in itself, could point to a build/hardware fault affecting certain batches of devices.
I think if you experience this issue AT ALL, then you should return your device under the warranty and demand a replacement, and keep doing so until you get a good one. Until HTC admits there is a problem and does something specifically to resolve it, this is possibly the only option and might actually force them to do something if so many devices are being returned.
By the way, posts suggesting that it might be due to the user having inadvertantly lowered the volume don't help - while peoples input is encouraged, input like that highlights that you have been lucky enough to not suffer the problem. If you had, you would know that it is utterly independent of what the volume level is set to.
captainsensible2002 said:
This issue has been reported before on the Tytn II (running WM6 and WM6.1) so its not a TouchFlo problem - if you search you will see instances of it cropping up all over the place but no 'official' response from anyone or indeed any sure fire fix to stop it happening.
In some instances people are attributing it to using a Bluetooth headset; on others, bluetooth has not been used at all and it has still happened. One of our managers at work had the problem on 3 successive MDA Vario III's (Tytn II) and then has had it again on a Compact IV, all running the stock ROM.
I would suggest it is an issue inherent in Windows Mobile, although it cannot be ruled out that its only in HTC's implementation as I have not heard of it happening on other WM devices. And it is highly intermittant - it would seem that if you have a device susceptible to it, then it will happen no matter what. If you don't, then it probably won't happen ever. So that, in itself, could point to a build/hardware fault affecting certain batches of devices.
I think if you experience this issue AT ALL, then you should return your device under the warranty and demand a replacement, and keep doing so until you get a good one. Until HTC admits there is a problem and does something specifically to resolve it, this is possibly the only option and might actually force them to do something if so many devices are being returned.
By the way, posts suggesting that it might be due to the user having inadvertantly lowered the volume don't help - while peoples input is encouraged, input like that highlights that you have been lucky enough to not suffer the problem. If you had, you would know that it is utterly independent of what the volume level is set to.
Click to expand...
Click to collapse
Thanks for the advice, but I must go on searching for other solutions; because I bought it in UK and I live in Brazil. That's my problem. It must have other solution.
Nothing to do with the volume
Blazeitup123 said:
do you have sound setting on ring THEN vibrate? also to fix your ring lag, try diamond tweak. there is a ring without delay tweak in there.
Click to expand...
Click to collapse
The ring is set Ring AND vibrate. The problem have nothing to do with witch volume the sound is set or the profile. And I rarely set the fone to vibrate only.
oh f**king great! I hadn't realised this was an issue and have not only unlocked my ROM but also flashed to a new ROM from the original!
Does anyone in the UK have an experience of returning a handset on Orange where this happened?
I can't find a UK Orange Diamond ROM anywhere but have flashed the OliNex Radio back to a stock HTC one......
Hello all,
I have got the T-Mobile version of the diamond (MDA Compact IV).
Sometime when my phone received a call and I press the on screen answer button, the other person can hear me speak but I cannot hear them at all. There are also times when I call someone and they can hear me but I cant hear them.
I have checked the volume control and it is on max. The only way to resolved this I find is to reset the phone. At the moment I seem to be doing a soft reset every other day and it is getting a bit annoying.
Any help would be greatly appreciated.
did you upgrade to 1.93 rom ?
Yeah im having the same problem too! i thought it was a rom problem and so i upgraded it to 1.93...things were fine ytd...but today its back to the same old problem...really need help on this...
ROM Version: 1.37.110.3 WWE
i will check the htc page for an rom upgrade tonight...even tho iawgnix is still having the same problem.
kinna glad to know it arent just me having this issue, i thought my phone is broken
Does no one else have this problem??
iawgnix said:
Does no one else have this problem??
Click to expand...
Click to collapse
im havin same problem here!!!thought was rom problem but i flash to almost the rom found here still the problem exist.try to flash the radio also!!pls can anyone advise!!!really need help!!!last resort would be to send it to service center as it may be hardware issues
I have the same problem and send it to Eurotwice for repair. It's there for 10 days and more problems has been found over there. Suddenly the screen and buttons don't function anymore. Eurotwice is still testing and there is no solution yet for this problem.
I have the same problem.
I had to make 4 or 5 softresets a day.
Yesterday I used the new O2-Rom, now it´s fine.
I will check it now for some days. If the errors comes back, I will send it back to O2.
anyone send TD to service centre bcos of tis problem??wats their reply??
if you turn down the ring volume it also switches off the system sound ( very annoying!)
when in a call try turn up the volume
darkenergy said:
if you turn down the ring volume it also switches off the system sound ( very annoying!)
when in a call try turn up the volume
Click to expand...
Click to collapse
its not the vol control bro!im very sure cos i have been using pda for a few years to understand the basic of using one.i dun tink its even rom related cos as i have mention in my earlier post ihave flash and try all the rom i can find here and the problem still persist....btw im residing in singapore,so anyone from singapore having the same problem??would like to hear some feedback from u guys.thks a million!!!
Temp Fix to this issue.
I have found a temp fix for this problem. When this problem occur during a call, press the middle button (circle button) which activate the screen, then press the speaker icon and you will be able to hear the person on the line and be able to continue the conversation.
Bare in mind, the moment you switch off the speaker, you cant hear the other person again It is very annoying that you have to use speaker in order to get the phone working. But at least you can use your phone meanwhile..
I really hope someone could come up with a permanent fix to this problem.
Hi all,
I have the same problem.
Is there a solution for this problem with an update of the rom ? I have the last official update from HTC (which updates the radio, etc.).
I have this problem many times on a day. My solution by the momment is to do a soft-reset...
Is there any solution updating to other ROM ?
Thanks.
Hi,
I have the same problem too.
Exact same problem here.
Can somebody please help out! I Really do not want to send my HTC for repair.
I don't think you have a choice. I tried changing radios and roms still having the same problem. It sucks ball that this problem is happening on another set of my diamond. The 1st set got repaired and its been functioning well for the past 4 months or so..
If my diamond is in standby mode for awhile and i make a phone call, i don´t hear anything. I must reset my diamond to use it for a correct phone call. Does someone have the same problem and hopefully have a solution? Thanks!
Do know how long it has to be in standby for? And is it reproducable every time?
captainsensible2002 said:
Do know how long it has to be in standby for? And is it reproducable every time?
Click to expand...
Click to collapse
It is different: sometimes 15min sometimes 1h. After a reset it works longer but then i have the same problem again. Just now my diamond was in standby for a 1h and didn´t work correctly.
Using the 1.37 and 1.00.25.03
I tried to upgrade to 1.00.25.05 with the offical htc rom upgrade but always said my battery is less 50% and the installation process stops.
And presumably your battery is over 50%?
captainsensible2002 said:
And presumably your battery is over 50%?
Click to expand...
Click to collapse
Just tried before again. But the same less 50% power warning message and stopping installation issue. My power settings told me 100% fully loaded.
Same problem
Same problem here, drives me crazy. I didn't link the problem to the phone being standby though.
I sometimes have it after receiving a message, sometimes after a whole night of inactivity, sometimes not at all after a day...
But in all cases all audio stops and a soft reset is the only solution...
Related threads (without solutions):
http://forum.xda-developers.com/showthread.php?t=420606&page=4
http://forum.xda-developers.com/showthread.php?t=424648
Same problem here It's only happened after a night of no activity (two nights in a row). I have to soft reset to fix the problem ...
binzelli said:
Same problem here, drives me crazy. I didn't link the problem to the phone being standby though.
I sometimes have it after receiving a message, sometimes after a whole night of inactivity, sometimes not at all after a day...
But in all cases all audio stops and a soft reset is the only solution...
Related threads (without solutions):
http://forum.xda-developers.com/showthread.php?t=420606&page=4
http://forum.xda-developers.com/showthread.php?t=424648
Click to expand...
Click to collapse
here is maybe solution : tested this morning and no problet yet but it's batter to test more days
SOLUTION
Some users of HTC Touch Diamond, the latest Windows Mobile 6.1-powered Pocket PC Phone, may encounter an obscure and weird problem when receiving SMS (also known as text message) while HTC Touch Diamond device is in StandBy mode with LCD screen powers off.
The symptom may be different from phone to phone, but the following scenario roughly describes the problem that faced by HTC Touch Diamond PPC Phone user. When the phone is in inactive stand by mode with screen off, the phone does not notify owner or user when by ringing ringtone or SMS tone sound or audio alert, nor vibrating the device when there is any incoming text message or SMS message. Only 5-way keypad light is blinking.
Sometimes, the device does play sound or vibrate, but not both together. Only keypad light flashing is confirmed to work properly. Some users also reported that if there is already new existing unread SMS text messages on the Touch Diamond phone, then the audio ring tone sound alert and/or vibration then work properly when there is new incoming SMS message.
The issue can cause HTC Touch Diamond owner to miss some important SMS text messages. It appears that the no audio alert sounds and no vibration (not even a delay trigger) issue after receiving SMS or text message is probably not caused by defective phone device, but caused by specific SIM card for unknown reason, as the issue happens intermittently, and may not happen when changing to different mobile service provider SIM card. One SIM card that been identified is Hong Kong SmartOne SIM card.
For HTC Touch Diamond who facing the no alert been made on incoming SMS while in stand by mode issue, but can’t change the SIM card, here’s a few possible resolutions that may fix the problem.
First of all, make sure that the phone is correctly configured to playback audio or sound alert or vibrating. Go to Start Menu, then select Settings. On Personal tab, tap on Sounds & Notifications, and go to Notifications tab. In the “Event” drop down list, select Messaging: New test message. Verify that either Play sound or Vibrate or both is selected.
On the same screen (Notifications), as a workaround to fix the issue, try to tap to tick the check box for Display message on screen.
If above resolution doesn’t help to make the phone notifies you via sound alert or vibration when receiving text message while in sleep mode, another possible fix is to enable SMS Wake Up Event. To do so, download and install a registry editor on the HTC Touch Diamond Windows Mobile device (such as PHM Registry Editor, see workaround to install PHM on Windows Mobile 6). Navigate to the following registry key branch:
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL
Locate DisableSMSWakeUpEvent entry, and change its value to 0 (the value is 1 by default).
All else fails, you may have to try to perform a hard reset on the HTC Touch Diamond, and send the device to HTC service center for repair or exchange
Did you document this yourself or find this info somewhere? I would be interested to know where its come from, if possible.
captainsensible2002 said:
Did you document this yourself or find this info somewhere? I would be interested to know where its come from, if possible.
Click to expand...
Click to collapse
http://www.mydigitallife.info/2008/...to-notify-when-receiving-sms-in-standby-mode/
I have the same problem, except that this happen after i use the BT headset profile (all sound output is redirected to bluetooth headset, and it seems that it won't revert back to original profile after you turn off BT profile) :S
at this moment since my tests my diamond is well
no sound problem
4 HOURS and no sound problem !!!
it will be ok if nothing bad until tomorow
well, thats fair enough if you were experiencing the issue normally within that time.
Was that just from enabling the SMS wake up?
That setting can be changed with Diamond Tweak/Advanced Config/TF3D Config if nobody fancies editing the registry by hand.
captainsensible2002 said:
well, thats fair enough if you were experiencing the issue normally within that time.
Was that just from enabling the SMS wake up?
That setting can be changed with Diamond Tweak/Advanced Config/TF3D Config if nobody fancies editing the registry by hand.
Click to expand...
Click to collapse
YES WITH TF3D_Config_0.6.7 youcan match in tweaks tab
WAKEUPONNEWSMS
AND
NOFACEDOWNMUTERING
enjoy, Ive tested yet and all is ok !!
I prefer wai ting until tomorow
oh no !!!!!!
i let my diamon switched on all night and this morning .... no sound !!!!!!!!
I will return my baby to SAV for reparation, but I don't know how many time i'll waiting and I'm worry about finding the same problem when my phone will be back
I had a feeling this might happen...
I've a new one since yesterday and no problem !!!
I'm very happy
I had to send mine in for repair
Has anybody found a solution for this? My Samsung Blackjack II is constantly experiencing this (although soft resets don't fix it - I have to hard-reset and recover from backup). Any help welcome.
I have same issue but the soft reset does not work. I had Mighty Rom 4.8 on it at the time and so I tried flashing back to Bell stock rom but problem persist. Read somewhere flashing to a 6.5 rom might help but not in my case. I tried Mighty 6 rom with no luck. I still have sound though when I plug in my headphones so I'm thinking the speaker may have just died on me? Might have to reflash to bell stock and relock and return as there doesn't seem to be a fix if there is one yet.
Hey guys,
I'm facing a very weird problem. I'm somehow facing a very weird problem with my X1, when I install ROM's (to be precise: itje's and the energy rom).
The problem occurs quiet often. As you all might know, the display turns itself off if you don't use your X1. However, usually it is supposed to come back to life when you press the "Power"-button. However, mine doesn't react, thus meaning, I have to do a soft-reset in order to get it back to life.
Which is pretty annoying, since I'm missing all my phone calls, and neither do I receive SMS. I asked a friend of mine to phone me, and the calls goes through, however the X1 does not react as it is supposed to be.
Would be great if someone could help me out
BR
CJ
I posted the same problem yesterday
http://forum.xda-developers.com/showthread.php?t=544976
Can i ask you witch radio u are using. i think my problem came after i updated the radio but i'm not shure
I'm actually using the latest Korean one ... 1.16 I guess.