As some of you may have found out i-mate launched its FINAL bluetooth patch yesterday only to withdraw it this morning.
Well this afternoon (my time GMT+3) they launched it again. Knowing that quite a few of you folks are NOT members of clubimate and would like to get the patch, I've downloaded them (as there are five flavors of them depending on your which ROM you are using; WWE, FRA, PTB, ITA and SPA)
Device Support - Bluetooth Patch # 2 for i-mate™ PDA2k
i-mate™ is aware of the problems being experienced with the i-mate™ PDA2k Bluetooth. This is the second patch which will improve the bonding between the i-mate™ PDA2k and other devices. With this patch the bonding between the i-mate™ PDA2k and Bluetooth headsets will be more robust, after the PDA2k has entered Power Save (Sleep) Mode. Customers have previously observed that:
- when the i-mate™ PDA2k enters Sleep Mode for a period of time, any in-coming voice call alert is not relayed via the Bluetooth link to the Bluetooth headset, so no audible alert is heard.
- when the i-mate™ PDA2k is bonded to a Bluetooth headset and has entered Sleep Mode, the device will periodically wake-up while in an idle state, without prompting by the customer, leading to unnecessary power drain of the battery.
The patch does not correct the beaming problem between devices using the Brodcomm Bluetooth stack, like the i-mate™ PDA2k, and devices using the Microsoft Bluetooth stack. We are still working on a resolution to this issue. Some Jabra BT250 headsets will also still have audio quality issues and we recommend contacting Jabra for a solution.
The correct patch to install on your device can be determined by tapping Start > Settings > System > Device Information and checking the ROM version suffix, eg x.yy.zzz WWE.
Click here to select the patch appropriate for English devices and Arabic devices and download "OEM_WWE_122_008.sa.CAB" this file is approximately 3.8 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the ITA language on your device and download "OEM_ITA_122_011.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the PTB language on your device and download "OEM_PTB_122_014.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the ESN language on your device and download "OEM_SPA_122_012.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the FRE language on your device and download "OEM_FRA_122_009.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click to expand...
Click to collapse
Please click on the Click here in the quote above to get the files as per your needs. No fear they are hosted on my server and you don't have to be a member of clubimate to get them.
Bluetooth version on the PDA2K
hey
downloaded the lastest version of the bluetooth patch from i-mate guess what.
The first update they did they upgraded the stac from build 2500 to buid 3500.
Now with the new version they have gone back to version build 3000.
Now he is the problem bluetooth driver still insufficient drivers with both of the stacks.
With stack 3500 when I connect to my Parrot 3300 bluetooth in the car it works fine I even get the network signal saying ok.
Now when I upgraded to the new vesrion which is build 3000 when I connect to the Parrot bluetooth car kit the network signal is not shown anymore so what the hell is I-mate do can they just release the new version or not.
My brother has a Qtek 9090 his upgraded to the new rom he get the license has expired on the Italian version what a joke.
Hows fault is this CD or Broadcom the makers of the bluetooth drivers.
I would like to known so I can pester the right people.
Thanks
Gigino
help!
Help! i´ve installed this "OEM_WWE_122_008.sa.CAB" and my today screen is all messed up! i´ve already done several soft resets but the screen continues all messed up
i can put this in XDA2 or qtek 2020
So which stack does this one up(down)grade it to? I currently have 3500 with no problems, I don't really want to install this one and find out its no good... please help!
sacaman said:
i can put this in XDA2 or qtek 2020
Click to expand...
Click to collapse
I don't belive so, it is for the PDA2K/XDAIIs/MDAIII/Qtek 9090
raiderz said:
So which stack does this one up(down)grade it to? I currently have 3500 with no problems, I don't really want to install this one and find out its no good... please help!
Click to expand...
Click to collapse
If its working don't change it, I perfer the 3500 rather than the 3000 'cuse it works better with my Jabra 100
Re: help!
Vega said:
Help! i´ve installed this "OEM_WWE_122_008.sa.CAB" and my today screen is all messed up! i´ve already done several soft resets but the screen continues all messed up
Click to expand...
Click to collapse
Just after the setup, I had exactly the issues on my QTEK9090. Go in the parameters -> Today and change the theme. After this, you shouldn't have any more screen problem. After a short test, it seems the Bluetooth problems with my Jabra 200 fixed! Good luck
thanks...
Thanks, A320!
MDA III Warning
Just installed the Bluetooth patch on my MDA III and was presented with a completely black screen after Soft Reset. The only way around this was to Hard Reset. Yet to test the performance of the patch, but thought I would pass on the warning.
Had same problem on MDAII (black screen after reset - hard reset to cure) so am using previous patch
hi all
please i wanna help .. im in deep trouble whan i was tryin to upgread my PDA2K the screen become black and word Serial v2.06 or USB v2.06 is in the screen... i tried to hard rest but there was no response.. the screen now is empty and i dont have any information to back it again!!! please any 1 here can help me
but where they on clubimate :?:
there only last ROM. Has not understood humour. :shock:
Could someone upload these patches to our xda-developers ftp server under the blueangel directory. There should be a bluetooth patches directory somewhere there......
Thanks
All you should need to do is remove it from the cradle,then put it back in the cradle and restart the upgrade again. It should start to run again.
If that doesn't work,there are a couple of other things you can try.
Anonymous said:
hi all
please i wanna help .. im in deep trouble whan i was tryin to upgread my PDA2K the screen become black and word Serial v2.06 or USB v2.06 is in the screen... i tried to hard rest but there was no response.. the screen now is empty and i dont have any information to back it again!!! please any 1 here can help me
Click to expand...
Click to collapse
i can't download OEM_ITA_122_011.sa.CAB
where i can find it?
10x
links are dead. Please PLEASE re-upload!!
cannot download WWE version
xda IIs users
Can somebody confirm that it works for XDA IIs please? cheers
Resurrecting DEAD threads from December 2004 will only serve to confuse the unwary! If you NEED this patch, go to the iMate website, register your phone and download it. *sigh* FYI: The patch has been incorporated into the WM2003 ROMs released since.
Tuatara ,
Is this patch incoorperated in Helmi WM5 Rom ? If not, any effect if i install this patch into BA Helmi WM5 ?
Thanks!
Hi, this is my first time posting here. I recently got my Imate pda2k after suffering through hp 6315. Anyways the first thing I did was upgrade the OS to windows mobile 2005. I installed all the patches and everything (assuming the stuff on wikipedia is all up to date). I have been very happy with the imate and LOVE wm 05.
Now to my problem, I haven't tried wifi yet but bluetooth hasn't been working for me At all. I've heard that people have had problems with it dropping after going into standby and what not, but my problem is that I can't even use it at all. I'm using the Tekkeon Eztalker mini bluetooth, and it worked well with the hp 6315. Anyways the device recognizes and finds the bluetooth earpiece but I haven't been able to use it at all. It's like the device recognizes it but it doesn't set it. Please help me out, maybe its something basic that I'm not doing. Tell me step by step how to set up the bluetooth just in case. I'm out of ideas.
Thank you.
oh and a side note : at this point how would you rate WM 2005 in comparison to the latest patches by imate? Which do you guys prefer?
thank you
Hi, I´m new heres. I have search trought the board, but not answer found.
I had no problems to connect my old Nokia 6600 phone to the integrated handsfree of my Ford Focus car.
Now, with my Qtek 9090, I can´t associate them using bluetooth.
I´ve tried with the 1.22 rom version (with some patches), and with the 1.4 rom version, and nothing happens, always get an error after typing the "0000" password.
If I try to discover the services of my Ford, the 9090 sais that no services are available.
What´s happening? What upgrade must I apply to my 9090?
Any suggestion will be great.
Thank you very much.
I had similar problem with SE HCB-700 car kit. I upgraded to WM2005 and didn't have any problems since.
And does the WM 5.0 works fine with the 9090? Not speed difference betwen 2003 SE?
Isn´t any other solution?
Solved with the OEM_ESN_124_011.sa.CAB upgrade.
is this patch spanish, what will happen if I put it on an english phone?
JonGoten said:
And does the WM 5.0 works fine with the 9090? Not speed difference betwen 2003 SE?
Isn´t any other solution?
Click to expand...
Click to collapse
The latest WM5 version's speed is really close to WM2003SE's. You might want to give it a try yourself.
Hi all
I have a BA with WM2003 installed on it. A few days ago I upgraded it to WM5 and everything worked like a charm.
But I coulden't live without the Danish keyboard so I downgraded again using the guide that's on the Wiki. I used the official rom from Dangaard: nordic_1.40.551 and I did the downgrade without any problems.
But when I receive an incoming call and I hit the green call button my BA hardresets, It's the same thing when I'm on the Today screen and hit the call button then it hardresets also. I tried to upgrade the radio_rom to version 1.15 but that didn't solve the problem.
So now I don't know what to do, so I hope that you could help me out...
Go for wm5 and use Resco Keyboard pro
xplode said:
Go for wm5 and use Resco Keyboard pro
Click to expand...
Click to collapse
I did that but I needed the danish letters on the hardware keyboard, I tried to use the "BA_AZERTY_Hardware_Keyboard_Patch_for_WWE_ROM" and change the keyboard layout to danish but that didn't work, of course I could try WM5 again if someone could make a danish hardware keyboard patch that works...
I upgraded to WM5 again but the problem still resist, it even reset's after I have choosen "lock all buttons except power button" and put my BA on standby and the press the call button, it just reset's everytime I press the call button.
Could this be a registry problem??? It is just a thought I have...
BTW, it's a Qtek 9090...
Hi,
I had the same problem. In the thread of helmi wm5 upgrade, you will find several patches, such as improving wifi connection and chache improver. I installed this patches incl de powermanagement patch and the problem was solved
used to have same problem
yes, I think it is a known issue. I used XDA IIs with 2003SE and it had that problem... I couldnt find any pattern though...
I upgraded to WM5, and now it doesnt happen anymore...
So, it must be something on 2003 Rom.
Since I upgraded from Orange FR 1.37 to 1.93, ActiveSync task (on the xDA)happens to lauchs itself whithout the diamond being connected to my computer. I'm not sure, but I think that happens when TF3D today's plugin reinits itself during the night.
I want to prevent this to save my RAM usage, any idea ? Or is there a simple conf I forgot to switch off ?
(found nothing on the search, I'm surprised nobody experienced the same thing)
Sorry i can't help you, but i have a similar thing except that it doesn't seem to autolaunch, but when it is launched ( because i synchronise the diamond ) it doesn't exit after... the activesync process stay here...
For your problem, aren't you sure you don't have configured a synchonisation via wifi oor with an exchanged server ?
Ciao
Fred