Database Develop

Windows Mobile Device Center Final

The final version of WMDC was posted today. See the link below as the Windows Mobile Device Center Page hasn't been updated yet.
http://www.theunwired.net/?itemid=3591
Or download directly
Download x86 Version Here
http://www.microsoft.com/downloads/...ea-9df9-4920-af33-3a0e2e4e7beb&DisplayLang=en
Download x64 Version Here
http://www.microsoft.com/downloads/...aa-bc6b-4864-8ffe-dc26e1d9f843&DisplayLang=en

Please reply if you have any success syncing the blue angel.

Can someone please upload it or provide alternative link. I cant seem to download it directly from microsoft. Thanks

firebird said:
Please reply if you have any success syncing the blue angel.
Click to expand...
Click to collapse
Hi, did download (the latest on MS website), install and use it without any trouble. It found my exchange setting on my BA and applied them without even asking me! This was last night, will see what happens today!
@ daddy_yankee1980: It is an upgrade to Vista with all the verification required, so even if it is uploaded you will have to be online and connected to MS website (I think).

it is "Microsoft Windows Mobile Device Center Driver for Windows Vista"
not the app

All the beta branding is gone from the application too - so I think its both driver and app.

Maybe you are right, i wont use vista just yet they have to fix a lot of bugs until i start to use it daily
here is links for both builds
x86
amd64

I'm currently using the Helmi AKU3.5 1.4Beta with no sucess to be detected, what rom are you using ?
Are you running the final version of the WMDC ?

Still problems with Vista
I installed the Windows Vista Mobile Device Driver Update Final, but my MDA Vario I is not connected. It is not recognized anyway. Any ideas how to solve this issue?
Thanks.
Markus

RUU
I am using Vista with final WMDC released driver with O2 Atom.
I am able to properly sync. No problems. However I am not able to update the ROM. It goes upto the sensing screen to display the current ROM on device and to be updated ROM info. etc. In the next screen it hangs and after some time of about 1 minute the device update utility says that it is not able to update the device. I even disable the firewall to check if it is issue with firewall. But nope no help. I again checked it with windows xp and active sync v. 4.2 where everything works perfect so no issues with O2 atom.
Any help is appreciated.

SX66 WM5 synched successfully
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.

I'm still not able to sync in Vista with WMDC. My BA is saying:
Connection Not Valid: unable to open the connection '`USB'. This Connection is no longer valid or does not exist. Select a different connection and try again.
Click to expand...
Click to collapse
I'm going to try a hard reset on my BA and see if thats the problem.

brandonm said:
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.
Click to expand...
Click to collapse
Since I just installed WM5 on my SX66, I was unaware that AciveSync does not backup WM5 devices. I purchased Spb Backup and that works better anyways.

It Works
When I plugged my device in today, the system was able to find drivers. All is good now.

Error 260 With Vista

Hello I am new here and a noob in the scene. I was trying to upgrade my Trinity D810 with my Vista Ultimate 32Bit. And I keep on getting the same error after going into the 3 Color screen (on my D810). Is there any solution?
And If possible can it not involved installing XP juz to get it to work? Cause I lost my copy of XP.

Goto www.trinityguides.info and it explains how to get it working in Vista, you need to install different drivers and it will work, I am using Vista and have the Dopod ROM on it

Thanks.
But I have been trying to follow the guide there.
But I can't seem to undate the drivers of XP on to my Mobile.
My connection from my PC to my Mobile is only through USB, and if I follow the guide, I cannot update the drivers as it ask me to not authorize USB connections.
I'm at a lost of what to do now.

I think you need to read it again, You should be changing the drivers in Vista for the HTC drivers from the USBAS folder, Then after you turn off usb connections in WMDC it uses the USBAS driver to connect. I found that I had to update the drivers every time I wanted to change a ROM.

Problems, bricked? No idea

Hey guys, in the past i have upgraded from the stock os to what ever the newest on here was at the time.
But some time after vista came out i downloaded a possible offical upgrader from o2s xda website, this heap of crap failed half way through upgrading with no error messages - i assume it was becuase i was running on vista at the time.
So after that, once we turn on the device we just see what i assume is the bootloader, When connected it says "USB v1.06" and if we disconnect it says "Serial" instead of usb.
Some research today provided there are vista drivers to be downloaded, so i installed those (On windows server 2008 x64 R2 beta! which is based on vista rtm) the driver seemed to install fine,
I downloaded "Syed Ather WM 6.1 Dark Edition" and ran HimaUpgradeUt_noID.exe but this errors out before even running with the following:
---------------------------
HimaUpgradeUt_noID.exe - Application Error
---------------------------
The application failed to initialize properly (0xc0000135). Click OK to terminate the application.
So any general direction here on how to get my little device back would be nice thanks guys

it requires .Net Framework 2.0
More Info here : http://support.realtyware.com/article.aspx?id=10015

Funny! Nice of it to give such a useful error message!
Thank you for your input, i will install now

The installer says i already have the framework, so this is strange.

oh, u running Windows Vista , get the latest version of WMDC - Windows Mobile Device Center and idk if the x64 version of the drivers ever worked..but you could alwas try.. i suggest u to to install the rom on a pc with XP

Thanks for the fast responces etc
I got this sorted last night
Welcome back to life little xda

Upgrading to WM6.5 on XDA IIs - Error 150 Maupgrade

Hey guys,
I am trying to upgrade my XDA to WM6.5. When following the wizard steps, I enter the PDA into the bootload menu, but when I run the application on my XP desktop, I recieve the following error:
Error 150: Rom Upgrade Utility Error
This ROM upgrade utility does not design for your device.
Please get proper ROM upgrade utility and try again.
Help! It's frustrating the hell out of me!

please add which rom you currently use, do you have activesync installed

Me also have the same error
I have yust tried to install the new release with the same result.
I have a Qtek 9090 with WM 6.1 rel 5.2.20262 b. 19949.1.2.0.black, but in the past month I have tested many other...
Simply the install program don't recognize the device so cannot define if it's right or wrong.
Thank you in general for your fantastic jobs !

Sorry !
Yes I have Activesync installed (for another palmsize divice).

What????
Palm size device???? so you dont have activesync... you have hotsync but....
You already tried the WM6.1.... so you have activesync... men you are getting me crazy jejejej lol
BTW...
Try to conect your device if the activesync dont recognize it and sync.... restart your PC and PPC... the if this not works...
Uninstall the AS then Reinstall it..... if not works...
Try to change to other USB port
If dont works check your advanced conections settings
and check or uncheck the advanced network config box..... if not works...
BTW upgrading needs bootloader so put it on Bootloader mode conect it if your PC says something about not recognized just.... try other PC.... are you on VISTA or XP? suggested... XP.

Thanks
I have used very bad words, so don't panic ! The other device is a "normal" HTC 3300 (artemis) with 6.0 italian std rom and A.S. 4.5.0 (Build 5096) on Win XP.
The 9090 syncs regularly and it is regularly connected (I have stopped the bootloader and reboot the BA), I will test to reboot all, and eventually change the USBport, tomorrow morning (I am a little tired now and the eyes start to cross instead of read). As soon as I have done it I will and report here what does happend.
For now many thanks to you and to Xplode also.

night men!!!
Hope it works for you tomorrow... good luckits our pleasure to help.

Have you tryed the following ?
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP

All Ok now
Symply from the last uprade of my 9090 I had changed the PC, so it haven't all the right Drivers.
Now, following Win XP requests (it was needing wceusbsh.sys) all is gone right so my 9090 actually exposes: CE OS 5.2.21169 (Build 21169.5.0.0) release. (and I am starting to play )
Many thanks to all.

you do not need drivers, install activesync in your pc, it includes al the drivers you need - if you have it and winxp still wants driver for the ba remove/uninstall activesync and reinstall it again - remember use the latest version of activesync

Hi,
Remove your "puce" and your sd card.
And try again of course with ActivSync.

For less worry upgrade on you BA's...I...WE recommend XP with Active Sync 4.5

flahing using Windows 7 beta

Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.

I would like to think there would be no problem you'll use the same WMDC as vista, but if you not sure flash the rom from the sd card, just rename it to blacimg.nbh (.nhb whatever? lol) and copy it to the SD main directory, once you enter bootloader follow the on screen instructions and it will flash the rom, I prefer this as it is faster then using the pc

Windows 7 is working excellent
mkent_barbados said:
Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.
Click to expand...
Click to collapse
Hello,
I have a Windows 7 latest build working. Just install WDMC (same version as vista mentioned above!)
It's working without any modifications and even much more stable then vista. It uses also less memory then Vista.
It is a very good choice apart from Windows XP -> Vista is the Beta version of Windows 7!!! ;-)
Many Thanks
Roman

mkent_barbados said:
Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.
Click to expand...
Click to collapse
I had nearly every build of windows 7 started with 6801 over beta 1 (7000) up to 7068 now and it worked on every version 32bit and 64bit! Just use the mobile device center ;-)

I've had no problems with win 7 synched to my Touch phone

No Problems with Win 7 no need to install anything to contact phone just use the mobile device center.

Ditto, works perfectly. You'll find Windows 7 installs some drivers the first time you connect your phone which may mean your flash times out while it waits. Just let the drivers install and the re-run the RUU and it'll start to flash

Running Windows 7 RC1 (7068) and no issues whatsoever

i couldnt HardSPL on windows 7 but other than that it works great with the HD.

I was trying to use USPL and that doesn't work (get USB in bootloader but the exe fails as can't find the usb port), guess I could try HardSPL but liked the idea of USPL. can you run USPL from the memory card?

did you change the usb drivers to the old ones? and turn off usb in active sync (on the pc)
I've done it on Windows 7 like the other users with no issues.

mkent_barbados said:
Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.
Click to expand...
Click to collapse
i am using win 7 RC, no issue with any thing~ flash, sync, charge, share internet.

mkent_barbados said:
I was trying to use USPL and that doesn't work (get USB in bootloader but the exe fails as can't find the usb port), guess I could try HardSPL but liked the idea of USPL. can you run USPL from the memory card?
Click to expand...
Click to collapse
Install Vmware Workstation 6.5 and then create a new windows XP virtual machine.
Map you usb to the VM whenever you want to flash using USPL and not only. It works perfect!

ok thanks guys, sounds like using the old drivers will work, but Vmware sounds like a perfect solution will try that.

Ca5c4d3 said:
Running Windows 7 RC1 (7068) and no issues whatsoever
Click to expand...
Click to collapse
If you don't mind may I ask where you get the download for RC1 7068? I tried through MS site and got a license key but no download link, it said download was no longer available. Would like to try it.

works fine on build 7048

hanlence said:
i am using win 7 RC, no issue with any thing~ flash, sync, charge, share internet.
Click to expand...
Click to collapse
This is funny.... I would love to know how you have RC1 when its not even been produced yet / hit testing stages of RC

To clear up some comments on Windows RC1. The leaked version of Windows 7 build 7068 in the license agreement says Release Candidate so people are thinking its RC1.
No biggie.
For those who want to upgrade from a previous version of Windows 7 Beta to Build 7068 understand that it WILL break your Windows Mobile Center 6.1 - when it tells you that its not compatible with the 6.1 version in the upgrade it means it. Don't mess with it. Install a fresh copy or you will not get it to work. Even if you download the 6.1 version to re-install.
For those who are installing the HTC for the first time it will say that it cannot find it. That's okay. Once it cannot find it - refresh your windows update and it will find a new driver. once that is installed it will try to install a another driver and it can't find that one. Refresh Update again and it will then find the final driver and Windows Mobile Center will recognize the Touch HD.

Guys, I have ActiveSync working (I am on Win7 7000 however) but was trying to flash (and yes, I had 'unticked' allow USB). This is what was failing. Can't find an XP disc so will try the older drivers as per the solution for Vista. Thanks for all the help.

search for VistaRUU on google for the older driver. It should work just fine under windows 7, I've used it to flash my friends' hermes.