Related
I was using the Custom RUU Wizard 1050412 WWE 101 11210 WWE to downgrade my Cingular 8125 and after flashing the ROM information reads as follow on the boot screen
IPL: 1.01
SPL 2.26
GSM: 01.12.10
OS: 1.5.4.2
Why is the SPL still at 2.26?
shouldn't it go back down to 1.XX
DID I BRINK my fone??????? This is really pissing me off
You nice folks out there please help. I want to upgrade to the pdamobile 3.0 with crossbow icon ROM. Thanks
I wonder why there's a STICKY on top with READ FIRST.... Step 16 seems familiar too me.
Hi,
I read the sticky, unlock cid unlock reflash the rom to 1.XX twice and still the SPL is showing 2.26. Any other suggestion.
Run it twice and it will downgrade to the 1.xx on both ipl and spl. I did this yesterday. if your going up to the 3.3 eventually make sure you flash to a 2.XX before going full fledged 3.3. I thought I bricked my **** yesterday too, but luckily with the help of a few nice people on here, i got it worked out.
Hi,
I ran it 3 times with no luck. I don't know what I'm missing the IPL is at 1.01 but the SPL is still 2.26. Now when I ran Lokiwiz 2b for the Super CID unlock I get error message, file too big. Help. This is driving me nuts
try reflashing the 1.xx twice, then doing lokiwiz, are you using the right lokiwiz? I'm no pro, but maybe that will help?
and did you copy the enablerapi file?
which lokiwiz version u are using I used 2b and 3
I used 2b, did you copy enablerapi?
I was trying to upgrade my ROM to G4 CID unlock my device. For some reason, i cant load the OS my phone, and when i turn on my phone, i stay in the bootloader, with IPL and SPL in 2.26.
What i can do? I'm diperate Help Me pls...
Thanks
Hi
its not dead if you still have a bootloader! all is not lost!
what you need to do is download the official update for the phone, the OFFICIAL t-mobile/cingular or qtek one
boot the phone into bootloader mode
plug the phone in
run the update as normal just let it go through
and all should be good!
good luck!
Thanks Duke...
where i can found the official update and how i can boot the phone into bootloader mode?
Thanks again
which rom i have to use ?
and where i can found it? on phone bootscreen i can see this:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 10.1.0.811
someone can help me ?
Thanks
if your phone is a g3 try the tmo uk
if you had a g4 try the wizard love
where i can found this roms ?
Thanks
tell me if your phone is a g3 or a g4
it's G4 I think
sure
croccolo said:
it's G4 I think
Click to expand...
Click to collapse
the ipl and sol that you write is for a g3
there is the link
http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
I'm sorry if this a repost or not, but i'm currently following the Upgrade procedure for windows mobile 6, and it required me to downgrade to the button rom. Everything went smooth, but i wonder. The guy in the tourital says that my IPL and SPL is one on 1.xx and another on 2.xx, as mine is both at 1.xx. i have the T-mobile MDA version, and I'm following the G3 tourital. Currently now it's just sitting there, should i continue without worry or do i need to do it over again to get one at 1.xx/2.xx. Thanks for the support
Harlan.
No - if both your ipl/spl is at 1.xx - then you are good to go, continue on to the next step.
It appears that some users (such as myself ) have to run the buttom rom twice to get both ipl/spl to be the same.
My first pass with the button rom gave me ipl of 1.xx -and spl of 2.xx
Ran the button rom a second time - and all was good
Good luck
Remember to CID unlock, then Upgrade IPL/SPL before upgrading to WM6.
Read the guide carefully,it says, the while downgrading with Button's Rom you might probably get ipl 1.xx and spl 2.xx,reflash the button's rom a few times more till you get both ipl/spl 1.xx.Its required to have both ipl/spl 1.xx to apply lokiwiz02b to SIM/CID unlock the phone,so as you already got ipl/spl 1.xx,you are lucky and good to go to run lokiwiz02b and unlock,remember only after unlocking the phone,upgrade to ipl/spl 2.xx by flashing T-mobile 2.26,ok
cheers !
Thanks
Thanks you Guys, it Successfully installed with breeze. Now that i upgraded the rom by installing the 2.26 before WM6, I'm getting 200% better reception, like it would take an hour or more Just to get reception ANYWHERE!!!!, I'm not kidding. Now that i finished up and installed the black diamond WM6, as soon i hit the today screen, I'm already connected to t-mobile. Thank you everybody for telling me that I'm safe on continuing the installer with both 1.xx ipl/spl, because now i have better reception, touch, unlocked, MDA. Thanks xda-developers for the great information.
Harlan.
Short version:
I have an xda Mini S
ipl 1.01
spl 2.21
OS 10.1.0.811
I was running the mfrazzz WM6 I think it was vers XM6r5 RC1. I tried to updgrade my ROM to a new one because if issues I was having with this version. It was great but I could no longer surf the web and my unit would crash with the WAN and internet running.
I had to CID unlock my phone last July to get this XM6r5 RC1 to run (I believe I did anyway).
Today I attempted to flash the button ROM to my phone and it made it about 22% then the phone reset and crashed (started to loop on and off at the green, yellow and blue screen). Now it starts to update the rom but most of the time it reenters that loop shortly after the button rom app starts. The battery was full when I started. I have tried 2 different PC's with no luck. Any help would be appreciated.
Additional info: the reason I tried to upgrade the phone was it would crash when accessing the web via wifi (just recently). When connected to the PC it was fine. If I used the wifi sometimes it would work for 5 mins sometimes none but everytime I would it would crash and start to loop on and off crashing at the splash screen showing the IPL and SPL. The only way to recover it was to pull the battery. It is now doing this reboot loop at the bootloader screen when it crashes).
I hope thats not TMI but I really want my phone working again.
I just discovered that it will start the reboot sequence regardless of whether it is plugged in or not. It will start randomly rebooting once it is turned on. I tried installing the RUU Hermes Qtek rom and now it is telling my my ipl is 2.26 as well as my spl.
Please help!
hi
I have a o2 mini s too mine is g4 i dont know yours but if you have hard spl you shouldnt flash official rom if you said that you have 2.26 ips slp then you should not have problems flashing to your official rom but if that doesnt help use the wizard love.
Hope i help.
gdtymze
Its really strange,if you say you had XM6r5 RC1,which is your device, G3 or G4 ?,cuz if you have a G3 phone,how come you have ipl 1.01 and spl 2.21.wm6 roms cannot be installed with ipl1.xx,got to have ipl/spl 2.xx. Also you say you Cid unlocked the phone.Are you sure ,it was xm6r5 OS ,which was running on your phone ? How did you flash it ? with ipl 1.01 and spl 2.21 ?
Well,if you have a G4 device,its not possible to CID unlock it and IPL shud have been 2.21.0001 and the SPL is 2.21.olip ? after HardSPL and in SoftSPL IPL/SPL remains the same as the original ipl/spl e.g 2.21.0001.
Would you plz be more specific and explain what the status of your phone is and what exactly you did before ?
Cheers!
zabardast_1 said:
gdtymze
Its really strange,if you say you had XM6r5 RC1,which is your device, G3 or G4 ?,cuz if you have a G3 phone,how come you have ipl 1.01 and spl 2.21.wm6 roms cannot be installed with ipl1.xx,got to have ipl/spl 2.xx. Also you say you Cid unlocked the phone.Are you sure ,it was xm6r5 OS ,which was running on your phone ? How did you flash it ? with ipl 1.01 and spl 2.21 ?
Well,if you have a G4 device,its not possible to CID unlock it and IPL shud have been 2.21.0001 and the SPL is 2.21.olip ? after HardSPL and in SoftSPL IPL/SPL remains the same as the original ipl/spl e.g 2.21.0001.
Would you plz be more specific and explain what the status of your phone is and what exactly you did before ?
Cheers!
Click to expand...
Click to collapse
Ok please bear with me my recollection is hazy on this. Last August my phone was runnging the O2 software. After checking in here I identified my phone as a G3 phone. I then checked to see if it was CID locked (after doing a posted test it appeared to be). I don't recall how I did the CID unlock. I followed the CID and flashing insructions posted somewhere in the xda-developers forum (it may have been with the rom I used (mfrazzz version) I think I flashed the original O2 xda software from the O2 site then I flashed the Wm6 to my phone I believe it was XM6r5 RC1. I think it was the XM6r5 RC1 only because when it would boot I would see 3 splash screens. First was a Cylon witht he HTC logo, followed by an orange speedometer (with the IPL listed as 1.01 and spl as 2.21 OS was 10.1.0.811 and I don't know that the GSM numbers were) and the third was the splash screen from mfrazzz (dark blue/green with mfrazzz on it). I am pretty sure it was the XM6r5 RC1 build but I could be wrong I think it was the latest at that time. It was stable for several months (basically until 2 weeks ago) when I deleted the recycle bin and temp fold from the memory card (not the device). After that if I accessed the web via wifi it would crash then go into a repeating loop and the LED would change from green to red. The only way to stop it was to remove the battery. I don't know what else to tell you. When I left it yesterday it was at ipl/spl of 2.26 after initiating a RUU hermes . . . . I left it overnight started it up with button rom and it made it 60% then started looping again and gave the error code 274. A second attemp made it to 14% then code 302 (it started to loop again. It still says ipl/spl 2.26. I'm really at a loss here.
ok, I believe,what you are saying must be true,anyway,its not common or observed or even seen to have ipl 1.xx and upgrade to a wm6 rom,untill you have a cid unlocked phone with ipl/spl 2.xx, I'm really,rather, surprised,how you got it!!! or you might have got ipl 1.xx after now again flashing Button's Rom 1.05,the second time now.
Anyhow,now download the official carrier's rom or T-mobile 2.26 or xda_minis_launch Rom and try to flash and recover back to default status and check with WST tool,speciaaly the 'CID Action' button,to verify the SIN?CID lock/unlock status of the phone, then proceed further,ok
Cheers!
I don't know how I got it either. I do know that the ipl/spl while it was working was 1.01 and 2.21. After my first few attempts to load the button rom and then a version of the hermes and t-mobile rom, my phone boots to the bootloader screen and has ipl/spl of 2.26. I have attempted the t-mobile rom a few times but the most successful was the initial attempt after letting it sit over night. It almost made it through (80%) with the t-mobile rom then it crashed and started its loops again. Subsequent attempts made it to as high as 60% and as low as 14%. Is it possible to charge the battery while it is in boot loader mode, perhaps with a wall charger and not plugged into the PC. I ask b/c I am worried my battery may be getting too low and also when it is plugged into the pc it boots automatically. Perhaps I should ask this but do you know where I can get the xda_minis_launch Rom I have searched here and google and no luck. What i did find here http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades gives me an error 530 unable to switch message.
Thanks for your help!
gdtymze
ok, try out this link below,you'll find all the requirements here and guidance.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Goodluck
Thanks! I will dl that and try that rom. Have you heard of a phone rebooting like mine does? Today once again I was able to start RUU (t-mobile) and once again it made it to just over 80% and then the phone would reboot and start looping until I removed the battery. I tried again immediately and it made it just past the phone verification before it started the reboot loop. Since then I have been letting it sit. Any suggestions or ideas as to why it would do that?
Thanks for your help.
Your are welcome !
It won't charge in bootloaders mode or from the pc via usb cable,but you can charge it with a wall charger and its always better and recommended to have a fully charged battery before flashing.
Cheers!
So if it is powered off and I use a wall charger then it should charge. When I started this process the batter had a full charge but I have no idea where it is at now that I have attempted to flash it so many time. With the new rom it only makes it about 65% then it loops. It is really starting to wear my patience.
hi, i am downgrading my wizard for days now. i followed the guided by dr puttingham. but my SPL won't downgrade. i used the button ROM & even the wizard_love ROM for several times now. my IPL is now 1.01 but my SPL is still 3.08. my wizard is a G3
anyone pls help
thank you for your Assistance
Flash 2 Times in a Row the button Rom 1.05 and you'll get both ipl and spl 1.05.
Anyway (Since It is understood you are in the process Cid unlocking) if your IPL is 1.05 try the LokiWiz.
I Cid Unlocked having IPL 1.05 Spl 2.25.
Aldo
I thought it was
Flash 1.05; CID/SIM unlock; Flash 1.05; CID/SIM unlock again.
It's been so long
thanks for your reply. but i did both the cid unlocking using lokiwiz and tried lashing the ROM twice and it still doesn't work
there must be something you missed in the directions.
Youa have to run the lockwiz aplication twice also. one for sim one for cid. usualy when I have that type of problem it is starring me in the face and i cant see it. I recomend stepping away from it for a bit.
downgrade and unlock ipl/spl 2.16
hi,
got a g3 wizard from imate - imate k-jam. have been reading up on the various posts on flashing g3 devices.
on one of the posts thru wiki:http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
i saw this "With your device connected to your computer as Guest, run the file that your downloaded. It's pretty much self-explanatory. Agree to everything, and let it do it's thing. It is downgrading your IPL to 1.05. You can only unlock your phone if the IPL is 1.xx, you can't do it if your IPL is 2.xx."
my worry is that my ipl is 2.xx
can i proceed with this? is there anyone who has successfully been able to do those steps on a device with 2.xx ?
Please advice.
Try This
I was having the same problem using button 1.05.Try using this rom The Xda_MiniS_LaunchROM_v154102.exe. Find it in the tutorial and download.Then follow the instructions.