hel plz my blue angel is saying goodbye to me - MDA III, XDA III, PDA2k, 9090 Software Upgrading

help people plz my blue angel dont want to pass the align screen(when i tap on the screen on the black cross each 4 times it comes again and agian) after i setup the wm5 leatest helmi version
i dont know y but it was working perfectly this day
what shall i do?

vhmed88 said:
help people plz my blue angel dont want to pass the align screen(when i tap on the screen on the black cross each 4 times it comes again and agian) after i setup the wm5 leatest helmi version
i dont know y but it was working perfectly this day
what shall i do?
Click to expand...
Click to collapse
You could try a proper hard-reset, i.e. the erase storage screen you did when you first installed it. If that doesn't fix it, you may have a hardware problem.

j
actually i tryed hard reset and installed windows 2003
but the problem is still
i dont know what happened i didnt hit it or scratch it even
it was working perfectly today and suddnly this
so strange plz help people any one have any thing to help plz say it

your touch screen sensor is seems to be broken

having owned my BA for about 1 year (i'm guessing it's about 2 yrs old in total), i'm not impressed with build quality.
- poor coating/finish (scratches!)
- headphone socket broke off
- power button broke off
- volume slider broken
- loose sliding mechanism
- loose stylus
- headphones torn and cracked
and, i DO use it carefully and store it in case when not in use.

Related

XDA2i baclight not working

I already own one of these and was getting one for a friend but I have problems....
The touchscreen works but the backlight wont come on. I have heard that it was upgraded to Windows 5 so it would work with Tom Tom6. It wasn't used much and there is a pic of it on ebay with the screen working....
So I am wondering what to do, as the battery would have run out in postage and I am wondering if the backlight turned off auto and can't be turned back on again!!! hmmm
all thoughts and help welcome!!!
(Do I somehow try to install a different operating system on like with my current one? )
First thing to do is switch it in and then while it is on Hold the power button down for 3 seconds as doing this once will set the backlight to off and again turns it on, failing that check the backlight sliders in settings. Failing that I would back it up and do a hard reset. LEDs can go on the screens but not often. You cant run WM5 on an XDA21 but TomTom 6 runs fine anyway on 2003se
yup did all of that, and dispite it saying 2i on the front its actually a himalaya so have posted there, looks like the lcd is damaged as i already tried what you suggested to no avail
also downloaded vjeschater programme and that didn't do it.
I then reimaged the rom to a previous version and that didn't do it so it must have been damaged in the post!!!
shame
so I have to wait for royal mail to cough up at least a portion of the cost....

HTC p3600 trinity boot problem

i started having this problem a month ago. after boot the PPC writes something in red and after a few seconds gets black
i recorded it so it would be clearer
http://il.youtube.com/watch?v=NAHqAZS2nZ4
i tried installing a few roms and even the original one from htc website
i would appreciate any help you can give me
Very strange. What SPL version doyou have? Have you used cooked roms? Anything else happend to the phone?
HTC trinity original ROM
Here is the original HTC Trinity ROM:
http://rapidshare.com/files/202845245/Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.zip
1. Press on/off button + camera button + reset (using the stylus)
2. You should now be in tricolor screen.
3. Connect the usb cable.
4. Make sure you have activesync runing.
5. Install the rom provided in the link.
In the link you will find rom+radio. (Radio version 1.20)
Here is a newer radio version 1.56:
Hey! My trinity have the same problem!!!
I habe all test: Without sim, without SD, with SD, with SIM (with SIM screen is grey)
What have you done?
Original ROM - same problem
Mine was doing this earlier
seemed that their was dirt stuck in the reset button hole causing it to stick in slightly
I got this problem too. My trinity would turn on and start to fade away. But mine was a liltle more artistic. Many times i saw a kinda round spot in the middle of the screen that become black, then half of the screen would black out and then the rest of the screen. Sometimes i even got colors.
I noticed if a had a fully charged battery the phone would work perfectly.
But most of the time it turn on, but the screen stayed black with the retro light on.
I was told to try the unbrick exploit.
me too !!! i have the same problem with my htc 3600 ? can someone help us to fix our htc's 3600 ?thanks in advance....
have you fix it ?
hi all
I have a small problem with my htc p3600. It's not starting. It's loading only the bios but it's freezing with the screen picture and is not loading the WM 5.0 I try to change the WM5.0 with a new one but I don't have a active sync. connection.Please help
has anyone found a solution to this problem ?
anyone have a solution?
Finally, what you should do?
Since the Trinity / P3600 is getting old now, I believe more and more people are going to face this strange problem sooner or later.
So I thought I should save your time and tell you what you should do when your trinity starts behaving like what was described at the beginning of this thread.
YOU SHOULD DO NOTHING !!
THERE IS NO QUICK FIX
THERE IS NO WORKAROUND
THERE IS NO CHEAP SOLUTION
I have searched and tried everything mentioned in this forum that might slightly be related to the problem and all solutions failed.
So after days and days of experimenting, I gave up and sent my device to HTC dealer who called me few days later to tell me that the mother board needs to be replaced.
The dealer told me the cost will be around $213, but they said they are going to sent it back as it is, because they don't have that board model anymore!!.
Even if they had, for an old device like this , I don't think it worth that mush money to fix.
**************************************************************************
*SO BASICALLY , DON'T WASTE YOUR TIME TRYING TO FIX IT AND BUY YOURSELF A NEW ONE. *
**************************************************************************
.
.
.
.
Hello,
I resolve the problem with this : Simultnous press Power and Camera buttons and softreset, you'll got bootloader, three colors mode. Perhaps a little error message like this WLAN error but if you plug usb, it's ok.
Hope this good for you (excuse my poor english)
I've had this same problem for about a year now and keep coming back to it.
Any forward momentum on solving the problem would be appreciated as I quite like this phone.
1. The phone will boot FINE without a SIM
2. It hangs like in the video (or other strange screens) as soon as I insert a SIM card (partially or fully)
3. I've tried 3 different SIM cards
4. I have no SD cards
5. I have installed 3.20.Olipro
6. An official ROM is re-installed
I must admit the phone has had a hard life (or is it just the cheap plastic coatings HTC use)
No sooner did I post this did I find a solution.
For anyone that is interested...I have managed to re-install the original HTC ROM but HAVE NOT managed to install a workable 6.5 ROM yet.
So, the answer I found was:
1. Put P3600i into bootloader mode (push camera+power+reset buttons for 2 secs and get triple colour screen)
2. Re-flash HardSPL 1.1 from my PC
3. Re-flash original HTC ROM (WWE_3.00.707.18_6275_1.46.30.11_108) by agian putting P3600i into bootloader mode first
I since tried several different radio stacks but haven't noticed any difference in reception so have left the original stack on (1.46.30.11) as it gives the best phone call quality
I love the UI of the latest WM6.5 but if the P3600i doesn't run them properly I'll just have to do without.
Good luck with your own unbricking.
it was working fine for me when i put a little piece of rubber between the processor and the metallic cover of it but after 3 months i have the same problem and the paper dont work anymore.... now when i press the power button the screen is black, only the backlight is working anyone have any ideas what to do?
OMG WTF, as soon as I saw this thread I switched my HTC P3600 on and it started doing it I reckon this is cursed, I will upload a video onto Youtube later and show you that is what happened.
I had this problem myself, didnt know what i was doing wrong, altho my tri color screen did this, not the boot one.
I removed memorycard and voila, everything went smoothly.
edited
sorry 4 my mistake

touch screen problem treo 750

I have the well known problem with not working touch screen. I have read all this posts on different forums but haven't find the answer. If somebody tried already - please tell me replacement to new (lcd + touchscreen) will fix this problem?
I found plenty of screens on ebay http://cgi.ebay.com/PALM-TREO-750-L...9|66:2|65:12|39:1|240:1318|301:0|293:1|294:50
20-30 bucks.
LCD
gfreeman said:
I have the well known problem with not working touch screen. I have read all this posts on different forums but haven't find the answer. If somebody tried already - please tell me replacement to new (lcd + touchscreen) will fix this problem?
Click to expand...
Click to collapse
I had a keyboard problem with one of my treo and I tried to cut up the phone to pieces. I pulled all of string cables one for the keyboard and one for the display. Cleaned all and then assembled it. It looks like workink well but the touch screnn doesn't answered. I cut up again and plug in the display cable again. It works now again.
Since then I dont cut up the phone
shubonker said:
I found plenty of screens on ebay http://cgi.ebay.com/PALM-TREO-750-L...9|66:2|65:12|39:1|240:1318|301:0|293:1|294:50
20-30 bucks.
Click to expand...
Click to collapse
Yes I know I also find them, but I want to know, does new screen fix problem, or after purchase of new screen I will have not working treo with 2 screens, and 30 bucks less
laces said:
I had a keyboard problem with one of my treo and I tried to cut up the phone to pieces. I pulled all of string cables one for the keyboard and one for the display. Cleaned all and then assembled it. It looks like workink well but the touch screnn doesn't answered. I cut up again and plug in the display cable again. It works now again.
Since then I dont cut up the phone
Click to expand...
Click to collapse
You know I already disassembled it and assembled it back for few times, but it still not working. Everything looks very nice and clear - like new but...
New screen doesn't solve the problem. I purchased a new touch screen (lcd + digitaizer) - it start working for few minutes, then stop again. I put off the battery an leave it like this for a month. Than I switch it on - it works (I successfully unlock it, passed f..... alignment screen). Now I use it, but touch screen doesn't work!
Please if anybody now what is the real problem, let me now.
I have the same problem. I upgraded my Treo 750 to a new ROM. It worked for a couple of hours and then it doesn't work.
I have read in a different forum that you have to turn down the screen brightness to less than 1/2 and it should work. I tried that and it still craps out.
I am also looking for a new digitizer from ebay. Would this work? Or do I have to purchase the screen and digitizer.
Would a new screen or digitizer work or will it crap out in a hour or so?
Besides getting a new phone what would be the next step for a solution?
I think it is a software problem. With WM5, 6 and 6.1 the touch screen didn't work but on the newish 6.5 version here it works just fine, all the time!
same
am currently having the same problem whaat is d solution pls is it rom WM6.5? who hav solve this problem?

My Xperias problems

First of all. Xperia x1 - the best phone till this day.
but i have some problems. I have the phone abouth 5-6 months now and:
1. M, N and SPACE buttons sometimes when i vant to tap a button they write like MMMM or NNN ajd SPACE semethimes tipes 3-4 spaces instead of just one.
2. for the last 3 weeks sometimes while making a call i dont hear a thing but then i turn on the speaker and i can hear the ringing or the other person who has already answerd. but it i turn off the speaker i dont hear him any more. I noticed sometimes it helps if i slide open and close the phone but not always.
3. Abouth an hour ago I wanted to slide open the phone to surf the net a little and when i start tho slide the screen (even very slowly) whe screns every other row gets black imediatly, the other rows of pixels that didnt get black imediatly start to fade and in a second of 2 the whole screen is black here and there some grey stripes are visible but it looks awful. like my xperia is diyng.
problem 2 and 3 seem to be caosed because of some slider/contact problem.
Now i have hard SPLed my xperia and i would like to get it to factory settings. I would like even that bootloader version or what ever its called to be the factory one. I have original WWE R3AA but the bootloader is stil the dard SPLed one Onlix or something like that.
Does anyone have any ideas abouth my 3 problems?
Does anyone have any idea abouth recovering the factory bootloader?
Ty guys
gbajzelj said:
Does anyone have any ideas abouth my 3 problems?
Does anyone have any idea abouth recovering the factory bootloader?
Click to expand...
Click to collapse
1- Send it to the repair center
2- Learn to read. The answer is in the same thread where you have found the hardSPL...
Mopral said:
1- Send it to the repair center
2- Learn to read. The answer is in the same thread where you have found the hardSPL...
Click to expand...
Click to collapse
I lol'd.
OP he is right. Your problems are hardware related, not software.
yeah i have the same problem! most of the keys of the left side of the keyboard write multiple times. I'd not call Xperia the best mobile... sony messed up on this phone! all the pre release hype amounted to a greatly faulted machine! if 800$ gets you a phone whose case paint comes off easily, keyboard starts to die, cracks on the case and really sucky panels then how can it be a great device! too bad now i am stuck with this abomination!
The keyboard issue is a common one I think. I took mine back to be repaired and it came back with a new keyboard....

HTC diamond screen problem solved!(Microp error) [ Assistance Cont. by Request ]

Note : Hi, due to work overload i cannot be active on xda. If you want personal assistance regarding this problem, you can get in touch with me via twitter
www.twitter.com/SiddharthSaiG
Click to expand...
Click to collapse
Before you proceed, please note that I cannot be accountable/liable for any damage caused to your phone. This is only a guide!*
THIS TUTORIAL IS ONLY FOR HTC TOUCH DIAMOND - NOT FOR DIAMOND2 / TOUCH PRO / HD2 ( This is simply because i don't have these devices with me and that i haven't tested! Those who have a spare handset are welcome to send it to me for diagnosis )
Let me get straight to the point. I’ve found out the solution to all the screen blackouts or the famous “microp error”. I’m sure no HTC so called Technical department could solve this.
I’ve been sitting 40Hrs straight with my HTC Diamond. ( The worst part is removing the screw’s and putting them back.)
THE PROBLEM –
1.It’s a hardware problem. Upgrading the microp.dll will not solve anything. ( Microchips gives really wired errors)
2.SYMPTOMS : A dialogue box showing “ Microp version 0 , Upgrade firmware “ (as far as I can remember) , dim or no backlight , no charging indicator , No backlight for physical keys , no touch sense (D button) , soft reset button non responsive..
3.EARLY WARNINGS: (a). If u have dropped your HTC diamond , then there is an 87% chance of this happening. (b.) Exposure to extreme cold/heat. ( if it’s a heat issue then u might need to replace the motherboard.)
THE SOLUTION
I don’t have a cam to record the entire event. But there is a YouTube video of an HTC dissembling. I’ve downloaded the video and put captions in it so that it would be clearer. Video will be uploaded soon.
Diamond de-assembling video - http://bit.ly/bxtcw0 (some Chinese guy , thanks dude)
PROCEDURE
When you remove the back cover , you’ll see
1.The battery
2.Sim card holder
3.Tons of screw’s
Remove all the visible screw’s.Remember , your warranty will get void if you have one!! This tutorial is for ones without warranty. Take a look at this picture :
http://www.twitpic.com/1cymw5
Remove the screw's shown above..
Next Locate the below chip.
www.twitpic.com/1cynw4
This chip is the main cause for the screen problem. This chip wen taken out has 2 connectors beneath it . These connectors wen gone loose causes the screen problem. It will take a few hours to just get them in place. ( HTC need to improve in build design)
www.twitpic.com/1cymhp . ( 2 connectors ) take out all the stickers if you want. Less annoying ..
Press it with your thumb (HARD) to ensure that they are in place. You can hear the click sound if you switch off your “Room” fan. Once this is done , put the battery without replacing the rest of the parts . ( All connections connected ) .. Try to turn it ON. If it doesnt , try again . Again it doesn't turn on then try again. Keep on trying. I'm sure that you'll get it working. IF it does turn on , please post reply's.
NOTE : Make sure that you connected everything back ( Very IMP) . For those who cannot take the chip out , I recommend you to watch a youtube video on how to dissemble an HTC diamond.
ATB
I DON'T ACCEPT DONATIONS . SO AS A "THANK YOU" , YOU CAN FOLLOW ME ON TWITTER
Twitter
RE:
No reply's? nobody tried this out?
I wish to try but with no pics it is hard to guess what chip to search for...
Can you apload some pics to some fileshare or send me on e-mail: [email protected]
thnx a lot
@ above
I've sent you the pics. Check it out..
@ all
Please follow me on twitter to get your replies faster regarding the matter. I have 24x7 access to my twttr account
Thanks a lotttttttttt ~ !!!!
THANX TO TEAM XDA !
I was wondering what went wrong d day wen i rebooted my device.
I was screwed with an error message "microp error please update ur firmware"
googled a lot before ending up with team XDA.
came to know its a software problem, i cleared storage, updated a rom but nothing worked. finally i read xda instructions, i went to d nearest mobile store n explained everything. (since i dont have tools to disassemble my device at home) d service man did d job n i got my htc diamond working !
he just charged 100 rupees, htc service center wud have definitely asked much more than that !
thanks to xda ! but d lesson i learnt is "NEVER DROP/THROW UR HTC"
----------thank you----------
PANKAJ KADEL
kadels.info
@ above
Glad to help you man. This is a really irritating problem.
siddharthsai said:
Glad to help you man. This is a really irritating problem.
Click to expand...
Click to collapse
Hi Siddharthsai,
I have a screen problem but a bit more unique. The touch screen can work for a while if I leave it alone but after using the phone for a while, the screen does not work. If I were walk around with the phone, the screen will not work.
The buttons all can work and the phone can function for programs that can be controlled by the buttons. I am wondering if the problem is the same as yours in terms of connection problem.
Appreciate your advise on this.
Thanks.
CH
@ ja_zzz7
ja_zzz7 said:
Hi Siddharthsai,
I have a screen problem but a bit more unique. The touch screen can work for a while if I leave it alone but after using the phone for a while, the screen does not work. If I were walk around with the phone, the screen will not work.
The buttons all can work and the phone can function for programs that can be controlled by the buttons. I am wondering if the problem is the same as yours in terms of connection problem.
Appreciate your advise on this.
Thanks.
CH
Click to expand...
Click to collapse
Have you tried Hard reset? Hold down the volume key and press the reset key and power button . Backup your data using PIM backup before doing this... let me know if its coming again..waiting for your reply.
I have done the hard reset using the volume down/enter and reset button. I have reached the screen where I have to press on the cross hair and is stuck here as the touch panel is not able to click on the exact spot as it is always clicking to the bottom left. The same thing happened when I tried hard reset using "clear all data and format" but have to wait for a while until the screen can work.
After that the screen problem came back again. Any other suggestions?
Thanks.
@ above
Sorry for the late reply. had some work.
Is you battery low? just turn off your device and charge until its full . this happens mostly when you use duplicate charger . try charging with htc original charger ( borrow it from a frnd ) ...charge it fully and hard reset. Tell me if it works... by the way are you having an Indian version of diamond? ( 2G) ?
Let me know.
RE:
Flash it with a new ROM and if it still persists , then its a hardware prob. do you still have warranty ?
man you are the bomb. many thanks for this tutorial
@ above
Thanx buddy. its not just me , its everyone in XDA ...we all rock
Guess what! My problem is solved. Did a hard reset yesterday but was stuck at the cross hair allignment as the screen was not responding. Left the phone overnight and could complete the allignment the next morning. After rebooting, the touch screen was jammed again.
Try flicking the screen with my finger a few times and managed to move from page to page and after flicking many times, the touch screen recovered and has been OK for the past 10 hours.
Guess one of the solutions for those who have intermittent problem is to flick your screen top and bottom. Guess the pressure must have connected any loose joints. I am a happy guy today )
ja_zzz7 said:
Guess what! My problem is solved. Did a hard reset yesterday but was stuck at the cross hair allignment as the screen was not responding. Left the phone overnight and could complete the allignment the next morning. After rebooting, the touch screen was jammed again.
Try flicking the screen with my finger a few times and managed to move from page to page and after flicking many times, the touch screen recovered and has been OK for the past 10 hours.
Guess one of the solutions for those who have intermittent problem is to flick your screen top and bottom. Guess the pressure must have connected any loose joints. I am a happy guy today )
Click to expand...
Click to collapse
Thats good to hear... see ... if you try , you can..congrats.
I have a HTC Touch Pro 2 and I am getting the Microp error. The phone is not covered by warranty so looks like I may have to attempt to fix it myself.
I notice your tutorial deals with the Diamond - Any idea how to fix a Touch Pro 2?
@ above
Bro . Microp error comes because of the connectors. Since this is a slightly bulky , twice as big as diamond and has a slide out keypad , i suggest you to take it to a guy who knows to remove and fix things back.. ( not service center ) .. he'll charge you probably 200-300 bucks...just tell him to reassemble it back. Let me know...
Regards
HTC Touch HD microp error solved
I recently made an attempt to do the same to a Touch HD which showed the same Microp error and know what , its working... PM me for the tutorial
( cant post on the diamond forum )
Regards
I needed new screen, the easy part was taking apart but stuck on these 2 connectors well the bigger one, even when apart it does not seem to go together?

Categories

Resources