I have a SFR s300+ locked to sfr on France...
So I need to change rom...
When windows mobile run - device can synhronize and activesync enable, but when I put device in bootloader by sspl or without them device only show as SERIAL connection not usb! I`ve tried to change cable, ports other OS on my laptops and other but I can`t connect to it in bootloader mode via usb...
where a problem hide ?
please, help.
1 connect the ppc to pc with usb cable
2 put it in bootloader mode while connected
worked for me this way.
bootloader problem
i've the same problem , i've tried everything without success. In order:
- change usb cable
-change usb port on my laptop
- change personal computer, reinstalling active sync
- change settings in "settings-connections-usb to pc"
- hard reset
Syncro works well, my phone works well but i'm not able to upgrade the LASAGNA ROM 'cause when i enter in bootloader mode, it stay only in SERIAL MODE. There's a workaround to install the rom from the SD card instead of the USB cable?
Is a cable' problem.
Change the usb.
I had te same problem, after works 100%.
I've tried with another USB cable but it didn't work. with the other cable i'm able to do everything like the original HTC cable i'm actually use. Do you think i should buy another usb cable? What are the specifications of the htc cable?
ilmetallo said:
I've tried with another USB cable but it didn't work. with the other cable i'm able to do everything like the original HTC cable i'm actually use. Do you think i should buy another usb cable? What are the specifications of the htc cable?
Click to expand...
Click to collapse
I tryed with another cable, don't work. I definitely exclude a cable problem. I think there's something wrong with the miniusb connection in the device. I would try to upgrade the ROM directly from sd card but the procedure in wiki don't work.
got it fixed
your overloading the usb port most likely old computer/laptop or power issues, i have the xv6700 so i can use the cradle for power from a wall socket then plug the other cable into the usb port. works like a charm
p3600 - only serial connect in bootloader
it has to be your pc drivers if your pc/laptop is vista there is a site with driver swap for xp drivers for vista pc/laptops. had the same issue and voila mines sorted.laso check comm manager on your device as well jus to make sure as i write jus completed rom upgrade to wm6.1 from spv m700
I've just bricked my phone by wiping data, installing Zeus rom(it's great rom, it's not related to this rom) and performing "fix permissions".
Now my phone is stuck on bootloop, and I have only micro usb cable for charging.
I've already unbricked my phone several times but now when I connect the charging only micro usb, my computer doesn't identify it.
(I don't manage to boot into CWM Recovery)
Any advice please?
(My original micro usb has been lost)
Thanks in advance!!
Solved:
Lol, I found in my house male microusb to female usb, and male usb to male usb cable, I just put them together and It worked!
I unbricked my phone.
Where would i find a HOW TO guide for installing drivers or making a On The Go cable work for my Lg Revolution device?
is there something special about this cable that the standard usb drivers wont work?
Jasbo said:
is there something special about this cable that the standard usb drivers wont work?
Click to expand...
Click to collapse
if he is talking about the standard otg cable, all it is, is an adaptor cable that allows you to plug in a flash drive to your phone or tablet. I have one for my tablet. And you DO need usb drivers for android. You're not hooking this up to your PC.
Hi everyone I explain my problem!
I just bought a otg for one USB cable, the problem is that the cable itself is well recognized the connection, but I can rancher any USB flash drive is not detected !
Rom: InsertCoin R248
Kernel: stock
Well FAT32 USB Key
UP
Hi,
so far I have not found an answer or a ROM:
Is it possible to use USB OTG and charge the Note with any ROM available? I have a few adapters that would let me connect a charger and an USB device. But when i try it with the latest official ROM i can only use OTG or charge the device. If someon can help or has a working link to such a ROM i would be very thankfull.
Greetings