I was wondering if anyone has had problems with their Infrared port on thier wizard. I have not been able to get mine working since the stock Cingular rom. Are their any .cab files or other drivers that may get this thing to work again or some diagnostics program? I'm running modified 2.24.10.1. ext 2.25.11.102 Tried a search but came up empty. I kind of miss being able to beam and sync via infrared.
Im not sure if its a problem with your IRDA, I have a feeling that the new activesync does not sync over IR.
Thanks Herman. I think I did hear about some removed features or problems with the new activesync. But my wizard will not beam or receive beams either. It really didn't bother me unitil I wanted to try the new Novii software and realize that my Infrared stoped working sometime ago. Any suggestions?
i could wirelessly connect via infrared with the latest activesync
Could it possibly be a hardware malfunction? I seems unlikely to me because of the few glitches this device reportedly had, IRDA wasn't one of them. Man I really hope its not a hardware problem.
it could very well be the hardware that's broken, i can't really image a way to test it properly so you know. Waht i do know if the device is within guarantee just send it back you get a new one
My IrDA works fine as well. ActiveSync 4.xx works with IrDA as well. The only problem I have is new laptops don't come with IrDA any more. However, they do come with Bluetooth and I use BT to do ActiveSync. No need to line up the ports and I can sync up to 30 feet away.
I suppose I could send it back in, I just did not want to go throught the trouble of locking it back up and putting the stock rom back on it. I know for a fact that it was working at one point because lined the port up with my laptop and it started to load wm modem drivers for some reason. Also it may very well be my ir port on my laptop because I cannot access my wireless link icon. Everytime I click it it does nothing. I forgot I had an old T-Mobile MDA collecting dust, so I'll try to beam to it.
Aaaah we.ll i had the idea you would have allready tried it on more then one device. Try send data(vcard, picture) by ir to a random phone that has an ir port and of course try reveiving something.
Good luck!
My mda worked perfectly, with my laptop that is. Could not sent or receive anything with the 8125. My last and final attempt will be a downgrade to to the stock rom, which is the last time I remember it working.
I've bought a used xv6600 off ebay which I'm going to convert to a carpc.
As a first time BA user, i have a few questions.
I have read the wiki/searched the forum, but I'm a bit mixed up and hence posting this thread.
installed versions on the phone:
model: PH20A2
ROM version: 1.36.00 WWE
ROM date 01/13/05
radio HA01_151
protocol AA.3.3.3.01
PRL 50619
extrom 1.36.116 WWE
hardware version 0041
a few notes:
- Its not going to be used as a phone as I can't register it with my local cellular provider (although they do support CMDA EVDO) - so I couldnt care less about if its radio works..
- Its going to be paired to a BT GPS from socket.
- the BA/xv6600 is going to be permanently mounted into the car (I'm still designing how, it would be in horizontal mode though).
- since It'll be permanently mounted, I won't (and couldnt) use the keyboard..
- audio out is going to be used to connect to an external speaker
- the BA will be charged from the car's 12v (always connected).
my questions are:
1) where could I find schematics for getting audio output (if exists), as well as where to connect the charge directly to the BA's connector.
I have only a cradle, no sync cable, which means I'd probably have to open up the BA and soldier directly, or get a connector...
2) should I connect audio out to the connector (if possible?) or the 2.5mm output on top of the device.. ?
3) I'd be interested in upgrading to WM5, I've read on the forums that it isn't possible on the CDMA versions because the radio doesnt work (or does it?). Since I don't care about the radio, could I install WM5 ? which ROM would be suitable for my BA model ?
awaiting your answers,
thanks!
Sounds like a neat project
ido said:
- the BA will be charged from the car's 12v (always connected).
Click to expand...
Click to collapse
Might be a bad idea...car batteries are designed to give out high power for short periods, not low constant drains. Personally I'd connect it to the ignition circuit so it's only powered when the ACC line is live. This will also turn it off for you after X minutes if you use the "auto-power off on batteries" function. It may even turn it on for you!
1) where could I find schematics for getting audio output (if exists), as well as where to connect the charge directly to the BA's connector.
I have only a cradle, no sync cable, which means I'd probably have to open up the BA and soldier directly, or get a connector...
2) should I connect audio out to the connector (if possible?) or the 2.5mm output on top of the device.. ?
Click to expand...
Click to collapse
The connector does have audio available. Buy a cable and hack it because if you mess it up you just buy another. Messing up the connector itself on the phone is more fatal. I think the schematic is on the wiki for the actual pin outs.
You might also find these useful:
http://wiki.xda-developers.com/index.php?pagename=Connectors
http://forum.xda-developers.com/archive/index.php/t-235616.html
yes after constant searching , i also found those threads.
Yet I'm wondering, some connectors don't include all 22 pins, but only the ones actually used for charging (for example) - and then it'll be really hard to hack them.
I guess i'll just have to hope I buy one that does have all 22 pins installed... unless you have other idea's for me.
Also, for the charger, you're right, I didn't mention that, but thats somewhat my intention.
Since the unit will be permanently mounted, I won't be able to sync it (unless I bring a laptop to my car) - could I somehow get a two SD cards installed at once to the unit ?
ido said:
yes after constant searching , i also found those threads.
Yet I'm wondering, some connectors don't include all 22 pins, but only the ones actually used for charging (for example) - and then it'll be really hard to hack them.
Click to expand...
Click to collapse
Yes, that's correct. If you get a charge & sync cable you'll have most. Might need to take audio from the 2.5mm jack in that case. That's probably the simplest solution if you cannot get a fully wired one. I'm interested in this sort of thing, so if you could post an update on what you go with I'd be grateful.
Since the unit will be permanently mounted, I won't be able to sync it (unless I bring a laptop to my car) - could I somehow get a two SD cards installed at once to the unit ?
Click to expand...
Click to collapse
I doubt you could get two SD cards. What may be possible is some sort of SD card extension device. Never seen one (never looked), but if it existed you could have a dash-mounted SD card.
Bluetooth or WiFi might help you e.g. with WiFi you could browse a network share to copy music over from your house. Also, there is a tool for WM5 that turns the phone into a keydrive, i.e. a USB mass storage device. Unless you need contacts etc sync'ed, that might be a bit simpler & give you more options to what you can hook up for.
PS bluetooth on WM5 isn't all that great. There is a "fix" that wakes the device now and then. This would light up your car overnight and might possibly be a thief magnet. On the other hand, if the battery dies on WM2003, you lose the data on it.
- At first I thought of making the device extractable, so I thought it'll be better to use the connector on the bottom for audio, but I've decided not to go this route (more complications and harder to make - also makes it easier for thieves.
So I'm probably going to go for the 2.5mm jack for audio.
- as for SD, since the SD slot won't be accessible, I thought of making an SD slot on the dashboard - and I'd like to switch between both.
an SD is connected via 9 pins, meaning making an SD switch is possible, but you wouldn't be able to use both.. thus I was wondering if software/hardware wise there is a builtin capabilty of such a thing as using two SD's at once. that'll be really cool.
- unfortunatly my XV6600 does not have WIFI, and BT is NOT an option for syncing (too slow !! - just imagine syncing 2gb of audio/vid via bluetooth..)
the two idea's I've had is making a USB connector on the dash (just incase I can get a laptop in the car..)
and the other, was the dash SD slot..
- for bluetooth, can't I just disable auto wakeup ?
- how will upgrading to WM5 save my data even if the battery drains ? its the same RAM chip's, not flash ROM, isn't that right ?
- as for HR's, the question is if I can somehow get the unit to 'working order' by installing software from the SD card, without actually syncing it to a computer..
fraser: Since I'm going to be connecting the ppc to the ignition circuit, and I'd also like to have a USB connector on the dashboard, I'd need to switch between the two.
i already have a car 12v connector -> usb charger device.
Should I buy a SYNC cable and convert it to charger, or car charger and convert it to USB cable ?
(although car charger might not have all the right pins..)
ido said:
thus I was wondering if software/hardware wise there is a builtin capabilty of such a thing as using two SD's at once. that'll be really cool.
Click to expand...
Click to collapse
Never heard of that I'm afraid. A switcher may work, but make sure there aren't any other physical switches that get tripped when you put a card in.
- for bluetooth, can't I just disable auto wakeup ?
Click to expand...
Click to collapse
No, this BT issue is the biggest one on WM5
- how will upgrading to WM5 save my data even if the battery drains ? its the same RAM chip's, not flash ROM, isn't that right ?
Click to expand...
Click to collapse
No, it's different ones. WM5 uses the "storage" area for your personal data; you now no longer have /storage as it's all in there. The RAM becomes proper RAM, although you can use some of it as a ramdisk with the same loss-of-power issues as WM2003.
- as for HR's, the question is if I can somehow get the unit to 'working order' by installing software from the SD card, without actually syncing it to a computer..
Click to expand...
Click to collapse
That's exactly what I do. I've stopped using the PC installers, there is enough junk on my PC. Just find the cabs for the apps and keep a copy on the SD card.
Not all apps have cabs.. so that might be a problem.
as well as I'll have to make pre-made .reg fixes just incase I'll have to HR.
as for WM5, if I install it, won't I have less free space then ?
ido said:
Not all apps have cabs.. so that might be a problem.
Click to expand...
Click to collapse
You can extract the cabs in various ways. Some exe's can even be opened in winrar.
as for WM5, if I install it, won't I have less free space then ?
Click to expand...
Click to collapse
You can reformat the storage area to 60 meg before the upgrade. Only before though. You don't get a memory slider like in WM2003.
Still, I'm not so sure on WM5 being the best for you. You'd want to have reliable BT and I'm not sure it is on WM5.
So I guess I'll stick with WM2003 for the time being.
I'm ordering an SD slot for the dashboard, as well as a USB connector.
Another Idea I've had is the need for the hardreset as well as reset button.
to which version should I upgrade my rom then ?
ido said:
- an SD is connected via 9 pins, meaning making an SD switch is possible, but you wouldn't be able to use both.. thus I was wondering if software/hardware wise there is a builtin capabilty of such a thing as using two SD's at once. that'll be really cool. ..
Click to expand...
Click to collapse
sorry to butt-in but, someone had done that before: SD-WiFi & SD Mem Card in parallel on the same 9 pin source: pda sd expansion.
a switch might be of help if you don't want to use the two slots simultaneously.
Yes I've seen that. Its a pretty lame hack if you read it to the end.
there's a better link with larger photo's for anyone interested:
http://homepage.ntlworld.com/david.hutchinson27/pockpc/
also, his project doesnt seem to work at the same time, and I've decided not to go with the switch route.
I'm reading a lot of the SD specs, So there is a very slim possibility I'll be able to get two cards to co-exist (and I would love some proffesional help if any of you guys know more about SD's then I do).
if not, then I'll just make an SD slot on the dashboard..
I've recently purchased an EverMore GM-R900 GPS receiver, connected to the 750v serial port through a mini-DIN adapter (which also includes power input from the car adapter). The question is : how do I map the serial (data) to make it available to other apps (other than active sync, which seems to be the only user of the serial...) ? I tried with GPS Gate but unsuccessfully, I cant find the correct source. Has anybody experienced something similar, yet? Perhaps with some carholder with integrated gps?
UP! C'mon.....is there a way? I've also tried with gpsgate but maybe I'm using the wrong parameters....... I've tried (from WM gps config) to map every port but I'm not getting a thing on any of them. The antenna itself seems to be working.
Still No GPS Device Found
Hi Guys,
Thanks in advance, i have gone through this site numerous times but still haven't been able to get my TomTom working on my new Treo750 and Ox-XDA IIs both running WM6.
I have GPS receiver in my cradle which works like a jam on my previous Treo650 (Running PalmOS). But since upgrading to this WM device it has become a night mare can't get it right particularly the way windows is handling com ports.
Can any one please guide me on how to get it going as I don't have PDA with in-build GPS receiver nor bluetooth receiver only this serial connected receiver.
Thanks
Nilesh
not sure i understood
If you have the tom tom software from your 650 and you are trying to use it on wm6 ,it is more than liely a software problem.
i have tom tom running on my 750,with a sirfstar 3 bluetooth gps unit, with no problems but the software came with the device.
If I am not mistaken tom tom allow you a device change every so often, in which case you will be able to download the correct software for your device.
Hello, i have qteck 9090 and my USB connector on the PDA are Burned. so i can only use BLUETOOTH sync with my PC. Is possible make upgrade to WM6 by SD CARD only?
Best Thanks in advance
PAscal
I'm afraid the answer is no.
For the angel, one has to have a working USB connection. If there was a way to add SD card flashing (I made use of this today with my hermes, beautiful thing it was!), I would hope that someone would add it to the boot loader.
If I may ask, how did the connector on the phone end up ruined?
i connect a bad GPS/carcharger Haicom to the qteck. The model that i had whas IPAQ 2210 and the connector look the same. Now with the right cable e use it perfect with GPS cable and Charger. But no way to have a contact for the USB SYNC. ( device non found) Thats will i use BLUTOOTH SYNC.
Thanks for help
Ps
The only other way to upgrade without a cable is through the sd method as jdc has pointed out. Sometime ago, I needed to do the upgrade but could not find any help in that direction. My thread on that did not receive any replies.
sofene said:
The only other way to upgrade without a cable is through the sd method as jdc has pointed out. Sometime ago, I needed to do the upgrade but could not find any help in that direction. My thread on that did not receive any replies.
Click to expand...
Click to collapse
Actually, I pointed out that there is no SD Card method for the angel.
Wish there was. Flashing images from a SD card on my hermes is a beautiful thing.