Related
He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help
try this
Firware an old rom back on the device prefrebly the one you ohone came with and make sure you phone is cid unlocked. Also have you tried a hard reset
Force bootloader mode!
Check this out!
http://forum.xda-developers.com/showthread.php?t=294107
That worked for me and others!
Good luck!
ghailoo said:
He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help
Click to expand...
Click to collapse
A couple of things to start with. First of all get you device back working. As mentioned by epimazzo above, force your device into bootloader and flash a stock ROM not a cooked one. Read the thread.
Once you have got your device working start reading before making any more rash decisions about upgrading to WM6 (especially when the file name hints that it is for a Prophet and not a Wizard). There is only one leaked Crossbow ROM for a Wizard. This has been cooked a few times (Orwell, PDAViet, Underground). There are many threads on the merrits of each ROM but you need to read read read before you end up with a brick.
Fixed Boot crash problem
Thank you Guys for all the help; I got it back running.
formatted : Push the network button and the voice button and reset then release the rest and you get the balck screen that has the press send button and that formats Wizard and then
Push the Power + Voice + Camera and I get the Red Green and White screen. quickly Update the ROM to the origunal one I have T-Mobile. It worked. You guys are the best. I found 5._Underground_edition_Crossbow_ROM But I was not able to flash it. I need to unlock the CID but I read that I would have to down grade the Wizard and then Unlock the CID. I am still looking for the old ROM.i think I found it. If anybody has a better way to Unlock the CID please tell me.
Thank you a Million tiles for all the Help guys.
[SOLVED! See page 4]
I have a Cingular 8125, which I hadn't used for a while (got a Trinity
I am trying to set it up for my wife, so I attempted to unlock it and upgrade to WM6. It is a G3 (it had 2.26). I had upgraded it several times before. but was never able to bring it down to 1.xx in order to unlock it.
So, I started trying to downgrade it, but basically, every time it entered bootloader, it seemed to lose connection and it just timed out on the PC, without ever going to the update bar on the bootloader screen.
I ran IPL_SPL_3.08, and it upgraded fine. But still no go on downgrading.
Finally, I ran Shelltool (bug fixed) and managed to flash to OS 1.5.4.2. But, after the hard reset, it just stays on the blue Cingular screen (showing IPL 3.08; SPL 3.08; GSM 02.47.11; OS 1.5.4.2.)
I have tried flashing again with an original Cingular WWE ROM (RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe), with the 1.5.4.2 ROM, even with a WM6 ROM (again, through Shelltool.) I have placed it in a powered cradle, have tried both Shelltool and RUU flashes, both while in the blue Cingular screen, and while in Bootloader mode. I have disconnected and reconnected each time, and rebooted many times (both the Wizard and the PC.) I have hard-reset. I have also tried both with USB selected and unselected in Activesync.
The Shelltool seems to freeze. The official RUU gives "ERROR [296]: UPGRADE ONLY. The NBF file cannot be used for your PDA Phone. Please get another NBF file." Or, alternately, it gives "ERROR [264]: CONNECTION."
Any ideas if this is repairable?
(Or should I cry (or take a hammer to the Wizard:-((
Mine is a 2.25 and it's a G4.. Isnt 2.26 a G4?
I think it was 2.26 (it may have been something like 2.27....), but it definitely didn't have the .000 at the end. I thought that the Wizards without the .000 were G3. Did I screw up?
Madcap180 said:
Mine is a 2.25 and it's a G4.. Isnt 2.26 a G4?
Click to expand...
Click to collapse
2.25.0001 or 2.26.0001 would be a G4
2.25 or 2.26 would be a G3
MacGuy2006 said:
I have a Cingular 8125, which I hadn't used for a while (got a Trinity
I am trying to set it up for my wife, so I attempted to unlock it and upgrade to WM6. It is a G3 (it had 2.26). I had upgraded it several times before. but was never able to bring it down to 1.xx in order to unlock it.
So, I started trying to downgrade it, but basically, every time it entered bootloader, it seemed to lose connection and it just timed out on the PC, without ever going to the update bar on the bootloader screen.
I ran IPL_SPL_3.08, and it upgraded fine. But still no go on downgrading.
Finally, I ran Shelltool (bug fixed) and managed to flash to OS 1.5.4.2. But, after the hard reset, it just stays on the blue Cingular screen (showing IPL 3.08; SPL 3.08; GSM 02.47.11; OS 1.5.4.2.)
I have tried flashing again with an original Cingular WWE ROM (RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe), with the 1.5.4.2 ROM, even with a WM6 ROM (again, through Shelltool.) I have placed it in a powered cradle, have tried both Shelltool and RUU flashes, both while in the blue Cingular screen, and while in Bootloader mode. I have disconnected and reconnected each time, and rebooted many times (both the Wizard and the PC.) I have hard-reset. I have also tried both with USB selected and unselected in Activesync.
The Shelltool seems to freeze. The official RUU gives "ERROR [296]: UPGRADE ONLY. The NBF file cannot be used for your PDA Phone. Please get another NBF file." Or, alternately, it gives "ERROR [264]: CONNECTION."
Any ideas if this is repairable?
(Or should I cry (or take a hammer to the Wizard:-((
Click to expand...
Click to collapse
I thought I read somewhere that IPL/SPL 3.08 was a bad convert from a Charmer? If this is true and the Charmer bootloaders are different than the Wizard bootloaders then you may have put yourself in a bind.
The fact that you can still get past bootloader is promising even though the phone doesn't finish booting.
Try flashing from the bootloader (tricolor IPL/SPL screen with USB in the corner)
Thanks. I've been trying to flash in both bootloader or "blue" screen, but no go so far. I just tried the official Cingular .nbf through shelltool: it spent about 30 minutes (in bootloader,) then it stopped responding. It's been doing this forever now.
Any other options left?
MacGuy2006 said:
Thanks. I've been trying to flash in both bootloader or "blue" screen, but no go so far. I just tried the official Cingular .nbf through shelltool: it spent about 30 minutes (in bootloader,) then it stopped responding. It's been doing this forever now.
Any other options left?
Click to expand...
Click to collapse
You CAN'T use shelltool in boot loader mode! it needs the OS and the TRUFFS to read and write to the phone.
Any phone that doesn't go past the boot loader must be fixed with mtty, RUU or SD card...
Thanks for the info. I've been reading about mmty and just downloaded it. But I only have a 4GB card handy (from my Trinity.) I might be able to find my old 2GB one at home.
Edit: Well, this is what I just found: http://forum.xda-developers.com/showthread.php?t=308772&highlight=mtty+wizard
It seems that the IPL_SPL 3.08 might be a real problem. I'll try the card flash, but based on the above thread, I am not holding my breath.
If anyone has a suggestion or a solution, please let me know.
Thanks!
BTW, if the problem is indeed with the IPL_SPL 3.08, then perhaps the suggestion that we upgrade to it (in red) here http://forum.xda-developers.com/showthread.php?t=285435 should be removed, so that we don't get more expensive bricks.
Just to clear up the question about 3.08 IPL/SPL, it isn't an issue at all. It's been tested thoroughly to work well, better than 2.26.
TaurusBullba said:
Just to clear up the question about 3.08 IPL/SPL, it isn't an issue at all. It's been tested thoroughly to work well, better than 2.26.
Click to expand...
Click to collapse
After I unlocked my wizard and before I try any new ROM, I always burn the latest German wizard ROM with 3.08 IPL/SPL "ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship". Then I downgrade the Radio ROM to Cingular 2.25.11. Then I burn my ROM of choice. I've found it works best for me. I've never had a problem with 3.08.
TaurusBullba said:
Just to clear up the question about 3.08 IPL/SPL, it isn't an issue at all. It's been tested thoroughly to work well, better than 2.26.
Click to expand...
Click to collapse
What are the grounds for such a comparison? How to tell that an SPL works better than another? As far as i know the SPL is there to initialise the hardware and to apply security restrictions.
What i'd like to know is if anyone has been successful in downgrading IPL/SPL from 3.xx to 2.xx as itsme once said that there was a security in newer SPL's preventing downgrading (i must look for it...)
cheers
O.K., so maybe it's not 3.08, but something has sure gone bad.
I am trying to use mtty 1.1.42.538, but see only Port 1, Port 2 and USB. When I type in \\.\WSCUSBSH001 I get a message that it cannot open the \\.\WSCUSBSH001 port.
I tried resetting as described in message #7 here http://forum.xda-developers.com/showthread.php?t=264652&highlight=mtty1.42, but nothing happened.
I also tried choosing USB, then typed in r2sd all and again, nothing happened - I just get CMD> again....
So, can anyone think of anything else I can do, or should I just drop it from the 4th floor?
What IPL/SPL values you have at this moment?
mestrini said:
What IPL/SPL values you have at this moment?
Click to expand...
Click to collapse
Both ar 3.08, and I have the feeling that this is why I cannot flash the official Cingular ROM over what I have now. Which makes me wonder: is there an official Wizard ROM file combined with the IPL/SPL 3.08? This may at leas allow me to flash.
MacGuy2006 said:
Both ar 3.08, and I have the feeling that this is why I cannot flash the official Cingular ROM over what I have now. Which makes me wonder: is there an official Wizard ROM file combined with the IPL/SPL 3.08? This may at leas allow me to flash.
Click to expand...
Click to collapse
I had also upgraded my IPL/SPL to 3.08 -- up from the 2.25 on the newest Cingular ROM.
Anytime I've flashed to a WM6 ROM, I've been able to downgrade to the T-Mobile 2.26 ROM -- which changes the IPL/SPL to 2.26 -- with no problems before upgrading to a WM6 ROM. After flashing the WM6, I then go back in and upgrade the IPL/SPL once again to 3.08. It's not failed me yet.
O.K., I've spent the weekend screwing around with this:
If I run any of the original 2.xx ROMs, I get "you need an updated utility" message and then the utility goes to the "Exit" screen. (I am assuming this is because of the 3.08 IPL/SPL.)
mtty tells me I don't have permissions when I tried to load the ROM on a SD card (remember, the 8125 is not SuperCD-ed.). It also does nothing when I type "set 14 0" or "task 28."
But, I found that I can run the XDA Mobile 6 ROM (http://forum.xda-developers.com/showthread.php?t=310954) and it actually starts updating, but when it gets to 99%, the bar on the 8125 turns red and after a while the Update Utility tells me that the Wizard is not connected anymore.
Got very excited when I tried mattk_r's InGeNeTiCs' ROM(http://forum.xda-developers.com/showthread.php?t=311144): it started updating, went all the way to 100%, at which point the bar on the 8125 did turn red, however after a period of time the utility gave me the "Congratulations" message and told me I've successfully upgraded. But then, the 8125 reboots, and unfortunately, it still hangs on the boot screen, and it still gives the OS as 1.5.4.2. Have tried a number of times, always the same:-(
Oh, I tried upgrading the Radio only, and it worked: I was able to upgrade to 02.61.11.
So, does it seem like there is hope, and can anyone think of what else I can do?
MacGuy2006 said:
O.K., I've spent the weekend screwing around with this:
If I run any of the original 2.xx ROMs, I get "you need an updated utility" message and then the utility goes to the "Exit" screen. (I am assuming this is because of the 3.08 IPL/SPL.)
mtty tells me I don't have permissions when I tried to load the ROM on a SD card (remember, the 8125 is not SuperCD-ed.). It also does nothing when I type "set 14 0" or "task 28."
But, I found that I can run the XDA Mobile 6 ROM (http://forum.xda-developers.com/showthread.php?t=310954) and it actually starts updating, but when it gets to 99%, the bar on the 8125 turns red and after a while the Update Utility tells me that the Wizard is not connected anymore.
Got very excited when I tried mattk_r's InGeNeTiCs' ROM(http://forum.xda-developers.com/showthread.php?t=311144): it started updating, went all the way to 100%, at which point the bar on the 8125 did turn red, however after a period of time the utility gave me the "Congratulations" message and told me I've successfully upgraded. But then, the 8125 reboots, and unfortunately, it still hangs on the boot screen, and it still gives the OS as 1.5.4.2. Have tried a number of times, always the same:-(
Oh, I tried upgrading the Radio only, and it worked: I was able to upgrade to 02.61.11.
So, does it seem like there is hope, and can anyone think of what else I can do?
Click to expand...
Click to collapse
If I were you I might be talking to IMEI unlockers. Their process works from bootloader and might be able to get you CID unlocked and fix your corrupted CID area, which seems to be your major problem atm. In any case I would contact them and explain your situation and see if they think their software will unlock your phone. If so then you should be good to go once you CID is "uncorrupted" and unlocked.
one question: can You HARD RESET your device?
Do you have "format failed" message?
if so, you have 50/50 per cent for resurrection.
3.08 is not direct problem here anyway..., version is not exactly matter of problem...
(imei? now? lol)...
Thanks!
Yes, I can hard-reset fine and it claims to reformat fine.
Tx for the suggestion - I will contact IMEI (they unlocked my Trinity before the free unlockers were available
after downgrading to buttons 1.05 rom and used lokiwiz to cid and simlock unlock my vario g3 i flashed it to t-mobile 2.26 after that i flashed it to crossbow reloaded v 1.7 but got alot of glitches with the keypad and the alarmclock did not work at all so i wanted to try another versin but i cant get activesync to work,no connection no nothing....also starting up in bootloader with soft reset and camera gives me a nice colourfull screenie but no usb text at the bottom so can i get another version on my mda or did i bust it up big time lol
dazzle999 said:
after downgrading to buttons 1.05 rom and used lokiwiz to cid and simlock unlock my vario g3 i flashed it to t-mobile 2.26 after that i flashed it to crossbow reloaded v 1.7 but got alot of glitches with the keypad and the alarmclock did not work at all so i wanted to try another versin but i cant get activesync to work,no connection no nothing....also starting up in bootloader with soft reset and camera gives me a nice colourfull screenie but no usb text at the bottom so can i get another version on my mda or did i bust it up big time lol
Click to expand...
Click to collapse
What are your current IPL, SPL, GSM and OS versions? Your description makes it sound like there is a conflict, though you said you did flash the T-Mobile 2.26 prior to your WM6. Maybe you flashed a modded one that doesn't have IPL/SPL? Does the radio/phone part of your device work?
Don't worry about activesync. Just boot into bootloader (see the wiki if you don't know how) and flash from there as long as USB shows in the corner you are connected. Your issue may be as simple as a bad flash of the rom you are trying to flash. I would suggest re-downloading it and trying again if both your IPL and SPL are 2.26. (or picking a different WM6 rom)
Ok just saw that you aren't getting USB on your bootloader screen you can always try the SD card method. I myself have never done it but many people have revived their devices using this method. Wish I could be of more help.
Also just in case you haven't done this already: reboot the PC. If you haven't upgraded to ActiveSync 4.5 I think you need to do that before you can get a connection in WM6. Google Activesync 4.5 and you should get the MS download page. Download that and install it and that may fix your issues.
Good luck
ive tried to reboot the pc and upgraded my activesync offcourse the rom cant be flashed from sd card i get a error when i try this also the usb is not working my ipl and spl are both 2.26 gsm 025.11 os 2.18.00
crossbow is still starting propperly but there is no way i can upgrade/downgrade
Folks,
Is there a way to downgrade just the SPL?
I'm having problems with a died wizard (mda vario) and my only hope is to get
a SPL downgrade from 3.08 to 1.X, so I'll be able to install again the T-mobile 2.26 rom.
My phone is totally killed at this moment and any help would be greatly apreciated!
Is there a way to flash another wm5 rom that works with IPL 1.x and SPL 3.08?
So I would be able to put the phone to work again, instead trying to downgrade SPL from 3.08...
T-Mobiles 2.26 should already downgrade it for you. I have my IPL/SPL upgraded to 3.08 and every time I get ready to flash a new ROM I load 2.26 first and it always downgrades it back to the 2.26 IPL/SPL.
Xeno,
When I try T-mobile 2.26 rom I got
"ERROR [296]: UPGRADE ONLY. The NBF file cannot be used for your PDA Phone. Please get another NBF file."
Ok, try this. Extract the nk file from the t-mobile rom update and then put that file in this flashing tools folder and then run the rom update utility in the folder and see if it solves your problem.
If you have the t-mobile rom in it's original form (a single exe file) and you don't know how to extract the nk file, that's actually very easy. All you have to do is use winrar, right click on the exe file and choose extract here and all the files will be extracted for you and nk file will be right there where you extracted it to.
By the way, I'm assuming that you are CID unlocked since you upgraded your IPL/SPL to 3.08.
Xeno1, thanx by the help,
Using original T-mobile 2.26 rom, it gives me File Read Error [238]
Now I'm Trying with wizard love rom, and its trying to flash
let's see what happens...sometimes my battery ends before finishing the flashing procedure, and I have to recharge again...(don't have cradle)
Hopefully the wizard love rom will work for you. Did you get that error using the flashing tools that I uploaded and the nk file from the t-mobile rom?
Oh, I just read your post in the did I kill the wizard thread. I didn't know you had an IPL of 1.xx and an SPL of 3.08. No wonder the t-mobile rom was doing that. The wizard love rom shoulkd be able to fix that for you.
Yes,
I'm using your flashing kit. First time the battery went down, so I'm trying again.
I tried this afternoon the Xda_MiniS_LaunchROM_v154102 rom too, and nothing happened (it flashed 100%, no errors at all). Just my IPL turned to 1.05, and the system didn't boot up.
EDIT
I don't know if my battery is damaged too, or the flashing procedure needs a lot of energy, but I had no lucky flashing this yet. The phone very often go back to the rainbow screen (showing a lose of battery power)
There seems to be a few people with an IPL of 1.05 and an SPL of 3.08 on here and all of them seem to have the same problem you're having. I'm not sure that the flashing tools that I gave you are going to help, but you can try them and see. It's worth a try anyway. Flashing the wizard love rom is what most people have been suggesting to do to fix it though. Did you try flashing the 3.08 IPL/SPL update aagain and seeing if that fixed it?
Nice idea about update again to 3.08,
So, this is a know issue? (having 1.X IPL and 3.08 SPL?)
Is there any known recovery procedure?
I did not try to do a 3.08 update again.
At this moment I'm recharging the battery, so I'll try one more time the wizard love rom, and can try to upgrade to 3.08 again as you said...
Trying to flash again the 3.08 update I got this:
ERROR[300]
These update utility cannot be used for your PDA phone. Please get newer Update Utility
Now I'll try the love rom again...
Any other ideas?
EDIT
I don't know if it is a battery issue or a problem with the love rom, because I've tried 5 times and got the rainbow screen at 55%, 85%, 96%, 99%, 100%, for example...I'll recharge battery for about 3 hours and give another try.
Any other good idea?
You could try using those flashing tools with the nk file in the 3.08 IPL/SPL update also and see if that works. I have a few more ideas to work on yet if those don't work.
Trying the 3.X flashing tools with wizard love rom I got the
message 300 (invalid rom, get new one..)
I still wanna try a full wizard love flashing, so we can try to conclude anything.
I'll go to sleep now, and will charge battery all night.
Tomorrow I'll give you the feedbacks...thank you Xeno1 for your help
We're almost there...
It's probably a good idea to give it a full charge before you start trying again. Heres another thing I thought of, I extracted just the IPL and SPL from the 2.26 rom and made a IPL/SPL 2.26 update for you.
Xeno1, you're a genius!
It worked!
I could not flash the wizard love rom, it's always stopped before the 100%.
I flashed your 2.26 ipl/spl rom, without hope, and it suddently started the chime!!!
Now my IPL is 2.26 and SPL is 3.08.... (the SPL didn't change anyway, but I'm glad the phone is back!!!)
Do you have a Vario MDA G3 wizard? I never could see(or even install) a WM6 on it, do you know if is it really possible? (I messed the things up trying to do that...)
Yes, I have a G3. I'm glad that worked for you. You still probably need to get your IPL ans SPL to be the same number. Running the 3.08 IPL/SPL update should be able to take care of that now.
WM6 is definitely possible on a wizard, It's been on my phone for about 2 months now. Before you flash to WM6 though, make sure you flash the whole t-mobile 2.26 rom back on it so that it has a good clean base.
Anyway, let me know how things go.
lotsa people make mistakes when flashing their rom for the first time and all.
whenever you start...when you use buttoms or love rom...BOTH your IPL and SPL should be 1.XX...before you start flashing back up. If BOTH are not 1.XX, you have to reflash with buttons or love, until they both drop down to 1.XX.
a lot of people don't read that part of the step...and seem to just flash with button or love once...have one number as 1.XX the other as 2.XX and then try to upgrade...lotsa times this causes problems.
in most cases, if you flash back down to 1.XX with buttons or love, and keep doing so til they are the same and then flash back up, things tend to work...otherwise...you can be screwed...
is it possible to flash wm6 right after flashing love rom with both ipl/spl 1.X, or should I do some other flashing before wm6?
If the WM6 ROM includes IPL/SPL, you can flash it without problem.
However if the ROM is OS only, you will get stuck at bootloader as WM6 requires 2.xx or IPL and SPL to load.
Hi All, tried to updrade charmer to touch flo ver2.1 but had error that host disconnected, now will only boot to tmobile splash screen with this info (noticed os has changed but cant remember original) also tried soft and hard resets to no avail
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
I can also boot to the three colour screen and it recognises when the usb is plugged in but i cant seem to flash anything, i have tried a number of RUU but get different error messages, mostly that i need a newer upgrade tool or invalid vendor etc.
any help greatly appreciated
UPDATE: managed to flash this rom, (charmer_wm6_vlono_004.4) says all was ok but still stuck in tmobile boot screen??? info still the same
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
HELP!!!
UPDATE: Managed to load latest tmobile charmer rom RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship.exe
Will i be able to load touchflo 2.1 now?
cheers
i got the same problem and i fixed it^^
1. i started charmer in bootloader mode (press and hold power button while you reset with stylus)
2. i installed T-Mobile AKU 3.3 from handy-faq.de
3. i installed [vlodeck TouchFLO WM6 ver. 2.1]
works perfect^^
http://www.handy-faq.de/forum/htc_charmer_download_157/
Nokia 3650 said:
http://www.handy-faq.de/forum/htc_charmer_download_157/
Click to expand...
Click to collapse
oh yeah.. i forgot
I used a crude method of fully charging the battery. I downgraded to the default T-mobile ROM that came with the unit. After the flashing process, was complete, the unit rebooted (as it was supposed to), then switched itself off after showing the SPL/IPL data for about 3 seconds.
The battery, was fully charged in a universal charger. To get it to turn on again, I have to remove the battery for a few seconds. A hard reset, doesn't fix the problem. I can still enter the boot-loader though
I've tried all the various ROM files on this site, with no success. Any suggestions?
I've PMed you saying that you can try flashing WM5 prophet rom. It should work.
Thanks for the PM. Unfortunately, the propht ROM produces the same result.
Hi!
Help please!
My MDA compact II was died!
IPL 1.13
SPL 2.06.0000
GSM 01.15.20
OS 2.6.2.27
This is incorrect!
I don't know what is that?
I am in a mess!!!
Help please!
mine died too
when I try to install AKU 3.3 always at 80 % i get a 302 connection error