Related
Hi; I tried to unlock my G3 wizard and now I think I am very stupid.
First, I get CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe and upgrade wizard, on wizard was IPL 1.xx SPL 2.xx, GSM also anything, but OS nothing. Blank line. Then that booted to bootloader.
So I tried RUU_Molski.Biz_226102_22610105_022511_WWE.exe, it wrote IPL 2.26, SPL 2.26 and OS nothing. Then i tried t-mobile rom, but it didn't work, because "only upgrade".
I tried through CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe, so now I have IPL 1.01, SPL 2.26, GSM something, OS nothing (blank line) and I think I'm stupid.
Any ideas? Thank you...
Michalek said:
Hi; I tried to unlock my G3 wizard and now I think I am very stupid.
First, I get CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe and upgrade wizard, on wizard was IPL 1.xx SPL 2.xx, GSM also anything, but OS nothing. Blank line. Then that booted to bootloader.
So I tried RUU_Molski.Biz_226102_22610105_022511_WWE.exe, it wrote IPL 2.26, SPL 2.26 and OS nothing. Then i tried t-mobile rom, but it didn't work, because "only upgrade".
I tried through CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe, so now I have IPL 1.01, SPL 2.26, GSM something, OS nothing (blank line) and I think I'm stupid.
Any ideas? Thank you...
Click to expand...
Click to collapse
Make sure that you have unlocked the device correctly. Read Dr. P's sticky:A Definitive Guide to Unlocking G3 Wizards and also the wiki.
I know that i haven't unlocked my wizard The problem was before that I started unlock... OS disappeared after first flash.
Michalek said:
I know that i haven't unlocked my wizard The problem was before that I started unlock... OS disappeared after first flash.
Click to expand...
Click to collapse
Reflash with the Button 1.05 Rom, if the IPL & SPL don't match after the first flash then flash a second time with the same Rom, that should fix IPL/SPL problems.
Now Unlock your device BEFORE flashng a 2.x Rom.
Dr P's Sticky Thread covers this, please read it throughly..
kyphur said:
Reflash with the Button 1.05 Rom, if the IPL & SPL don't match after the first flash then flash a second time with the same Rom, that should fix IPL/SPL problems.
Click to expand...
Click to collapse
I reflashed Button ROM for three times, I still have IPL 1.01 and SPL 2.26.
kyphur said:
Now Unlock your device BEFORE flashng a 2.x Rom.
Click to expand...
Click to collapse
I can't unlock my device, because I haven't OS...
kyphur said:
Dr P's Sticky Thread covers this, please read it throughly..
Click to expand...
Click to collapse
Hm, in point 7 - Connect your device and cancel the partnership. (You're a guest )
I can not connect my device, because I haven't OS on Wizard, he boots only to bootloader (with IPL 1.01 and SPL 2.26). I can flash from PC, but then I never have OS od MDA.
I read the "A Definitive Guide to Unlocking G3 Wizards" many times, but I dont's see any solution...
Maybe I have strange wizard
When all else fails, flash an official Rom from your Service Provider. That should get you back to working order then proceed with the unlocking from there.
Michalek said:
I reflashed Button ROM for three times, I still have IPL 1.01 and SPL 2.26.
I can't unlock my device, because I haven't OS...
Hm, in point 7 - Connect your device and cancel the partnership. (You're a guest )
I can not connect my device, because I haven't OS on Wizard, he boots only to bootloader (with IPL 1.01 and SPL 2.26). I can flash from PC, but then I never have OS od MDA.
I read the "A Definitive Guide to Unlocking G3 Wizards" many times, but I dont's see any solution...
Maybe I have strange wizard
Click to expand...
Click to collapse
When I say "Connect your device" I mean to connect it to the USB cable. Two paragraphs after item 17 I address this issue. You don't need an OS, just be in the bootloader screen. I've personally had this exact same thing happen where all I had was the IPL and SPL with nothing else. Remove battery from PDA and then put it back in. Make sure you reboot your PC.
Good luck.
When all else fails, flash an official Rom from your Service Provider.
Click to expand...
Click to collapse
good idea, but it doesn't work; because "upgrade only" - My originally T-Mobile ROM is only 2.21, so I can't flash it
17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM This will give you a strong 2.26 IPL and SPL to work with.
Click to expand...
Click to collapse
Invalid Vender ID.
But I can flash MOLSKI ROM with 2.26 IPL/SPL. Should I?
==
For everyone: Thanks for your time, really. But I'm confused, I read all, nothing helped.
Let's say: "Michalek is very stupid, we'll write him "what to do" step by step" ) something like "You asshol, connect your mda in bootloader to pc via usb, then download this, run it, then ...".
Because manual doesn't work for me, probably.
New year, new way I tried to flash today - and - i see OS, I'm in OS, I'm going to unlock wizard based on Unlocking Tutorial ;-)
I don't know, why it was successful. I tried reboot yesterday for four times, but it not helped. Only today.
I'm the happiest man on the planet And, "I've seen PROBABLY every situation with a G3 device here." - it is TRUE
Thank you for your time.
Michalek said:
New year, new way I tried to flash today - and - i see OS, I'm in OS, I'm going to unlock wizard based on Unlocking Tutorial ;-)
I don't know, why it was successful. I tried reboot yesterday for four times, but it not helped. Only today.
I'm the happiest man on the planet And, "I've seen PROBABLY every situation with a G3 device here." - it is TRUE
Thank you for your time.
Click to expand...
Click to collapse
Good to hear you are making progress, let us know how things turn out!
--M
-Michalek- Well that's wha we like to hear! The 1.05 works great as a disaster recovery tool. Most times when it doesn't work I tend to lean on the PC as the culprit. CHKDSK, temp files, spyware and virus's, etc.
Happy New Year, no?
Don't feel stupid
I'm glad it's working for you! Don't feel stupid though. My first attempt at loading a new rom went very similar. The CID unlock process told me it was successful (I thought) but it wasn't. I freaked out and thought all was lost. But I finally worked through it by going back to the Button ROM (LOVE THAT BEER SPLASH SCREEN) and starting over. The same problem even happened again about three weeks ago. After freaking out, I reloaded the Button ROM and was back on my way to normalcy
MDA is running on Superrom 1.1 and it works!
I don't know, what exactly was the problem with OS, but it helped me, when I left MDA cca three hours without battery. When I flashed the ROM before, OS wasn't.
At the last time, THANK ALL OF YOU VERY MUCH. And special thanks for Dr Puttingham and his unlocking tutorial. Thanks.
Ok...
awhile back, I updated my MDA with hacked ROM that made bluetooth better (bluetooth 1.2 i think). anyway, i had no problems with loading new ROM. IPL is 2.17
now, i want to update to newer ROM. as instructed, i downloaded new Tmobile ROM 2.26 and tried to update my MDA.
during the install, i get an error saying my nbk file is corrupt and cannot proceed. so i have the tri color screen and i have to reload ROM 2.17. so my problem is that i cannot update to a newer ROM without fixing the nbk files that are corrupt.
anyone have any ideas on this??? i need help please....
tia,
mike
Read and follow:
http://forum.xda-developers.com/showthread.php?t=298613
Just do everything it says and you will be fine... This will point you to the links you need
thanks...i have some more questions
1) i currently have a full backup of my stuff. if i reload the backup, will it interfere with my new ROM?
2) can you point me to where i can find wm6?
again, thanks for your help....
-mike
1). Yes it will interfere with your new ROM.. not stable anymore
2). Just search around and you'll find plenty.. trust me
ok...went thru the procedures and i am now dead...
not dead really but my mda works but it at Button 1.05 ROM. i cannot write a new ROM...everytime I try, my phone powers off...no tricolor screen.
my IPL is 2.17 and my SPL is 1.01.000
i was trying to get IPL and SPL to 1.XX in order to write Tmobile 2.26 ROM.
anyone, please help!! does anyone know how to manually get to the tricolor screen?
thanks,
mike
Reset while holding the camera button
This guide was written a long time ago. I recommend people to use this more up to date guide:
Wizard Windows Mobile 6 for newbies
I've got a lot of post behind my name, but most of my posts are answers to the same questions over and over again. It seems very hard for "noobs" to find the answer to their question quickly on the forum. I quickly wrote a little step by step tutorial for them. Hope it helps!
Suggestions or corrections are always welcome.
You want to flash your wizard, but don't know where to start. Try this:
0. First determine if you got a G3 or a G4 device. When you turn on your device from can can see you're IPL and SPL version on the screen. If you got IPL/SPL 1.xx or 2.xx you've got a G3 device. If the IPL/SPL shows 2.xx.xxx1 you've got a G4. Go to step G3.1 if you got a G3 and G4.1 if G4.
G3.1 Does you're device start normally (yes) or is it stuck on the three-colored bootloader screen (no)? YES... go to step G3.5, NO go to step G3.2
G3.2 Turn off you're device totaly. Remove the SD card and disconnect the USB cable from you're device. Turn on the device while holding the camera button. You will get into bootloader mode (3 colored screen). Connect the USB cable to the computer and you will see USB at the bottom of your screen above the left softkey (Activesync will not connect in bootloader mode, but you can flash from this screen!). If you got IPL/SPL 1.xx go to G3.3. If you got 2.xx go to G3.4
G3.3 Download button rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.4 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.5 Is your device CID-unlocked (note: it's not the same as SIM-unlocked!)? YES... go to step G3.7, NO OR DON'T KNOW go to step G3.6.
G3.6 Follow this great thread by Dr Puttingham: The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards. Don't skip step 17! Flash the T-Mobile 2.26 Rom! Go to step G3.8 if you got the T-Mobile rom with IPL/SPL 2.26 on your device after doing this.
NOTE: Some people seem to have problem with flashing the button rom in this step (stops at 98% with error 302). Replace button_rom with Xda_MiniS_LaunchROM_v154102 and follow the rest of the steps normally when this happens!
G3.7 Download T-Mobile 2.26 rom and flash it to your device! Done? Go to step G3.8.
G3.8 You're reade to flash the AKU2, AKU3, WM6 rom of you're choise! It wasn't that hard, was it? If you still got an older OS version after flashing then you're not CID-unlocked! Go back to start!
------------------------------------
G4.1 Does you're device start normally (yes) or is it stuck on the three-colored bootloader screen (no)? YES... go to step G4.4, NO go to step G4.2
G4.2 Turn off you're device totaly. Remove the SD card and disconnect the USB cable from you're device. Turn on the device while holding the camera button. You will get into bootloader mode (3 colored screen). Connect the USB cable to the computer and you will see USB at the bottom of your screen above the left softkey (Activesync will not connect in bootloader mode, but you can flash from this screen!). go to G4.3
G4.3 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G4.4.
G4.4 Is your device CID-unlocked (note: it's not the same as SIM-unlocked!)? YES... go to step G4.7, NO OR DON'T KNOW go to step G4.5. (note: CID-unlocking a G4 is only possible by paying for it at imei-check!)
G4.5 Download enable-rapi.zip. Transfer Cert_SPCS.cab and EnableRapi.cab to your phone. Run Cert_SPCS.cab FIRST and EnableRapi.cab SECOND. Turn your device off and on or wait 5 minutes before soft resetting. Done? Go to G4.6.
G4.6 Follow this great thread by the-equinoxe: [solution] G4 SoftSPL Flash any ROM to CID locked G4 [UPDATED] and load the softSPL on your device using his method. Make sure you take a G4 safe rom (see the thread for details). After the steps you'll have the rom of your choise on your device!
G4.7 You're reade to flash the AKU2, AKU3, WM6 rom of you're choise IF the rom DOESN'T contain IPL/SPL. AKU3 and WM6 roms normally don't contain IPL/SPL. If you want to flash an AKU2 rom, make sure you take the G4 version. If you get an error 300 (invalid update tool) while trying to flash your device look at this thread!
NOTE: If you tried to flash a G3 rom with IPL/SPL in the rom on a G4 you probably will have a bricked device! DON'T flash the new 3.08 and 3.09 IPL/SPL to your G4!
NOTE2: If you got problems flashing with softSPL: Follow this great thread by mun_rus: Solutuion found: how to flash any rom to CIDLOCKED DEVICE. If your device won't start after flashing you can use step G4.2 and G4.3 and try again. Also look at this thread by eddieitman: Faria G4 Step by step installer with instructions to make sure you did all the necessary steps!
Nice one.
One thing I've found is since the Mods split the WM6 stuff to a seperate forum a lot of noobs are in that forum and they don't see the stickies over here now (I've had a couple PM me directly asking where this Wizard Upgrading forum is at that I refer to in my posts ). So I think we need some stickies like this or something in the WM6 forum (or a sticky at the top of that forum with a pointer to this forum and maybe certain posts over here).
Nice. Maybe we should add a link in the Wiki to this...
--M
Corrected the links to wizard_love.... they didn't work.
I found this solution much better than shelltool for flashing my G4 CID-locked Wizard:
http://forum.xda-developers.com/showthread.php?t=271043
Shelltool can only flash the OS while using this modified RUU you can task the OS, splash screen, and the radio. Plus this modified RUU will also flash Wizards that do not bootup normally.
You can't flash a touched OS that way in a CID-locked G4.... only some 2.26 roms will work. Trying this with WM6 will go to 100%, but you're "old" OS will startup again.
Say i downgrade my phone to the T-mobile ROM but have a cingular phone...do i need to have my phone SIM unlocked to use it or since i changed ROMS it doesn't matter...
JBLaze407 said:
Say i downgrade my phone to the T-mobile ROM but have a cingular phone...do i need to have my phone SIM unlocked to use it or since i changed ROMS it doesn't matter...
Click to expand...
Click to collapse
SIM Unlocking only allows you to use SIMs from a different carrier on your phone.
CID Unlocking allows you to flash different Carrier / Country roms on your phone.
If you are only CID Unlocked, you can flash Tmobile, Cingular, Qtek, etc on your phone, but your device will still connect to the same carrier that your SIM is setup for. So for me, I'm on Cingular. I flashed the TMobile 2.26 ROM and I have the complete TMobile look and feel, but my carrier and phone connection was still Cingular since thats what the SIM is for.
I always flash the TMobile 2.26 rom on my phone now before upgrading to a new custom ROM. Its more stable (IMO) than the CIngular 2.25 (at least numerous issues I used to have went away by doing this, but then the custom ROM may be really fixing that, but I like having the latest IPL/SPL for my base).
As always... YMMV
mfrazzz said:
SIM Unlocking only allows you to use SIMs from a different carrier on your phone.
CID Unlocking allows you to flash different Carrier / Country roms on your phone.
If you are only CID Unlocked, you can flash Tmobile, Cingular, Qtek, etc on your phone, but your device will still connect to the same carrier that your SIM is setup for. So for me, I'm on Cingular. I flashed the TMobile 2.26 ROM and I have the complete TMobile look and feel, but my carrier and phone connection was still Cingular since thats what the SIM is for.
I always flash the TMobile 2.26 rom on my phone now before upgrading to a new custom ROM. Its more stable (IMO) than the CIngular 2.25 (at least numerous issues I used to have went away by doing this, but then the custom ROM may be really fixing that, but I like having the latest IPL/SPL for my base).
As always... YMMV
Click to expand...
Click to collapse
Thany you very much for the info...
nice work....stiky.....
could someone post the above info in wiki..... so we can redirect questions to wiki.
If I have CID-unlocked G3 T-Mobile Wizard with custom WM5 ROM installed .... why do I need to downgrade to T-Mobile 2.26 ROM before going to WM6 ?
bogdatov said:
If I have CID-unlocked G3 T-Mobile Wizard with custom WM5 ROM installed .... why do I need to downgrade to T-Mobile 2.26 ROM before going to WM6 ?
Click to expand...
Click to collapse
Good question.... have you flashed T-Mobile rom before? If you haven't you will get the strong 2.26 IPL/SPL. It prevents many problems! This step is to prevent people to upgrade to WM6 with other IPL/SPL!
bogdatov said:
If I have CID-unlocked G3 T-Mobile Wizard with custom WM5 ROM installed .... why do I need to downgrade to T-Mobile 2.26 ROM before going to WM6 ?
Click to expand...
Click to collapse
You want to downgrade so that it cleans up things that are possibly left from a previous install. The Official ROMs have everything (IPL / SPL / OS / Radio / Extended ROM / etc). If you go straight from a custom rom to another custom rom you may find you have stuff left over because the new custom rom doesn't clean up everything. I've seen where things are left in the message queue, so you start getting pop errors about not finding something when that was on the previous ROM.
While it takes extra time, flashing back to an official rom gives you a clean base for the custom rom to work off of. Well worth it for me so I always do this. Takes an extra 15 mins or so, which is better than wasting a day chasing some issue that wouldn't have been there.
BTW: Congrats on getting your post promoted to a Sticky!
mfrazzz said:
You want to downgrade so that it cleans up things that are possibly left from a previous install. The Official ROMs have everything (IPL / SPL / OS / Radio / Extended ROM / etc). If you go straight from a custom rom to another custom rom you may find you have stuff left over because the new custom rom doesn't clean up everything. I've seen where things are left in the message queue, so you start getting pop errors about not finding something when that was on the previous ROM.
While it takes extra time, flashing back to an official rom gives you a clean base for the custom rom to work off of. Well worth it for me so I always do this. Takes an extra 15 mins or so, which is better than wasting a day chasing some issue that wouldn't have been there.
BTW: Congrats on getting your post promoted to a Sticky!
Click to expand...
Click to collapse
Is it also recommended that a downgrade to T-Mobile 2.26 is followed for unlocked G4 phones?
pdagenius said:
Is it also recommended that a downgrade to T-Mobile 2.26 is followed for unlocked G4 phones?
Click to expand...
Click to collapse
Good question. I don't have a G4, but I'd think the same would hold true to get a stable / clean base for the new custom rom.
pdagenius said:
Is it also recommended that a downgrade to T-Mobile 2.26 is followed for unlocked G4 phones?
Click to expand...
Click to collapse
NO! that rom has IPL/SPL in it. Don't try flashing this rom onto a G4! It could brick your device!
thanx a lot !
Great job vippie!
I've updated my thread to reference this.
Please update the first post
Hi Vippie,
Can you please update the first post so that when you tell people to get to the bootloader screen that Activesync will NOT connect, but if it says USB above the left softkey that it is connected? This is something I've had to tell people over and over. People see that activesync doesn't connect so they stop and don't go any further.
Thanks! And again, excellent work on this guide. I'm pointing people to this now as I like how its laid out and gives G3 and G4 info in one place (since so many newbies don't think its important to tell us what they have or anything)
BTW: Has this been put into the Wiki?
mfrazzz said:
Hi Vippie,
Can you please update the first post so that when you tell people to get to the bootloader screen that Activesync will NOT connect, but if it says USB above the left softkey that it is connected? This is something I've had to tell people over and over. People see that activesync doesn't connect so they stop and don't go any further.
Thanks! And again, excellent work on this guide. I'm pointing people to this now as I like how its laid out and gives G3 and G4 info in one place (since so many newbies don't think its important to tell us what they have or anything)
BTW: Has this been put into the Wiki?
Click to expand...
Click to collapse
Good one.... updated the starting post! Thnx!
I was upgrading my t-mobile 8150(?) the k-jam with the new windows mobile 6 and in the middle of it my comp crashed!! now i am stuck at the bootloader mode (3 colored screen) and when i try to redo it i get to 99% and get a 302 error message. i follow the instructions given but keeps going in circles. its a G3 so is my phone bricked or is there a way to save it? i've been looking at this site all day but am now just more confused. lol thanks for your help!
No your phone isn't bricked. As long as you can get into the bootloader screen you should be ok. What you need to do is flash an official carrier rom either tmobile 2.26 or wizard love rom after you that than you can reflash to wm6. look at the stickies in the wizard forums that is where you can find these roms.
Thanks for the info but seems my techno curse continues. I tried the wizard love rom but it was in a different language and whem i tried the tmobile 2.26 i got "error 274 connection." Any more suggestions? Again thanks soo much for an issue I'm sure has been posted here a thouand times.
This happens to me all the time. I always use the Cingular 2.25 rom, it works perfectly and I have an I-mate K-JAM. Then, do the WM6 upgrade, but ensure all of your Norton and Antivirus and background running apps are shut down. Good luck.
yes also take out your mini sd card if you have one. even though its in another language it will work. "AVANTI means next. so just keep hitting that and you will be fine.
hmm been trying to d/l the Cingular 2.25 rom but the link seems to have stoped working...
It;s aaaaaaaaaaaaaaalllllllllliiiiiiiiiiivvvvvvvvvvvvvvvvveeeeeeeeeeeeeeeee!!! for now lol Lets see what happens after i install wm6 I couldn't get the cingular rom but i had already dowbloaded the button rom i found here earlier and it worked like a dream!! quick and easy!! thank you all soooooo much!
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
flash to the tmo 2.26 or cingular 2.25...that will give you an IPL/SPL of 2.xx
then, you can flash to WM6
i want to delete this message. can't find a way to do it.
there's any other way to flash without usb cable?? sorry to bug in this thread but i lost my usb connection somehow and did a hard reset and still doesn't work. my phone charges. and no is not my computer cuz my wifes phone same as mine does sync i have a tmobile mda also known as the cingular 8125.
fallon75 said:
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
Click to expand...
Click to collapse
keep reflashing buttons rom until both ipl/spl are the same number. if they are different, then the flash didn't complete correctly. (it happens often, so it's kinda normal). just keep reflashing. after both ipl/spl are the same, then CID unlock and then update to an official carrier...then flash a wm6.
can anyone help me??
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
starkwong said:
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
Click to expand...
Click to collapse
it does shows but how can i flash?? it still won't connect o my pc. my pc doesn't recognize it. but it does recognize my wifes phone.
Try to run RUU straight with Wizard connected and running in bootloader mode
Hello all,
I am somewhat of a newby here, but I have successfully unlocked my Cingular 8125 and installed a couple of WM6 ROMs. I followed the procedure of downgrading to Button 1.05 ROM, then running Lociwiz, then installing T-Mobile 2.26, then WM6 ROM. Worked great...until now.
I was going to try another ROM, and I followed above procedures (didn't know if I needed to after initial unlocking, but I did anyway). At the "install T-Mobile 2.26" step, after 1 %, I got an error 326?, nb file not for this device. I can still install cooked WM6 ROMs, and the SPL changes, but IPL always remains at 1.01. If I try to install IPL/SPL 3.08 CAB, SPL changes to 3.08, IPL stays at 1.01. I have re-installed Button Rom 1.05 and run Lociwiz a dozen times to no effect. Even the Cingular WM5 OS meant for this device gives me the same error code as the T-Mobile.
I'm hoping this is a simple newby error. Anybody have any suggestions.
Thanks for any help.
By the way, after loading Button ROM, my Wizard hangs during the customization routine at Signed_DiscoButton8.sa. I must soft reset.
I got exactly the same problem.
I am now on IPL 1.01 , SPL 3.08, radio 2.69, using rom NBD 8.3
doesnt seem a problem however...
d-lite said:
I got exactly the same problem.
I am now on IPL 1.01 , SPL 3.08, radio 2.69, using rom NBD 8.3
doesnt seem a problem however...
Click to expand...
Click to collapse
Hey m8,
have you forgotten this thread (http://forum.xda-developers.com/showthread.php?t=319582) ? (see last post)
mestrini said:
hahaha nice to see good spirit after all this
Here goes:
Make backup of the CID block (VERY VERY important!!!)
Make backup of the GSM calibration block (VERY VERY important!!!)
Kill wcescomm.exe process
Start mtty, enter bootloader mode in Wizard and connect
type doctest (this will write test patterns in DOC chip and clear all data!)
Flash button ROM (1.01_IPL/1.01_SPL/1.05_OS)
Flash CID block backup (don't miss this)
Flash GSM calibration backup (important)
If all ok then remember to upgrade to 2.xx before installing WM6!!
Post results
EDIT:
Use WST for steps 1, 7 & 8
Click to expand...
Click to collapse
are you willing to prove me wrong?
mestrini said:
are you willing to prove me wrong?
Click to expand...
Click to collapse
yes.. missed your last post to be honest, sorry..
(btw phone is happy till now .. but we go for solving it, killing seems impossible)
step 2, gsm callibration block.. how do i copy?
D-Lite
use the "Read ROM" button and select the appropriate section from the list.
status:
Code:
DOC ImgFS partition read/write test PASS
Ext ROM partition read/write test, offset=0x0, length=0xA00000
Test pattern =0xAA
Flash Ext ROM failed.
DOC Ext ROM partition read/write test FAILED
--Flashing button rom @ 100%
--DATA CRASHES PLEASE CONTACT SERVICE CENTRE
--WST Says I am still on SPL 3.08 and rom is write protected.. screen of wizard says SPL 1.01 ...
--Installing Button ROM, ... SIM Lock SUDDENLY
--Screen goes funny flashing between simlock and customise
--Few soft-resets, WST now convinced on SPL 1.01 and flashed CID block
--Soft-reset
--Imei gone, flashed back GSM callib. data, softreset
--doesnt boot passed the pint of beer... going for RUU of T-Mobile 2.x
--bootloader, flashing RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe
--The NBF can not be used for your phone @95%, followed by congratiolations (stupid software)
--trying UK version...
--all give error 326
--another button flash
--*PLING IDEA* on 3.08 i couldnt doctest properly... so doing it again
-- bad idea.. same result...
damn... i thought it would work
anyway, there was point where the phone had same values for IPL/SPL (not too bad ). What is strange is why phone didn't boot anymore after flashing the GSM calibration and saying the flashes weren't suited for the phone.
What state is it on now? Wanna go again? This time, instead of flashing the 'GSM calibration data' do a simple IMEI writing and try to unlock CID before upgrading to official ROMs
sorry for this...
IPL locked on 2.26
I am having the same issue. I have tried numberous times to load my original rom and get the 326 error @ 1%. My ipl remains locked on 2.26. Is there any way to fix this? Please help.
it is now on 1.01, got my own imei back, spl 3.08, nbd 8.x rom...
everything fine again.. pretty sure it has something to do with ext.rom and/or write protection of it.. will give it another shot but not this month.. getting busy
@acmickey, not sure if you got same issue... is your IPL 1.01? else you might just have a locked phone..
Hey d-lite,
I followed your example and loaded BSD8.3 ROM and IPL/SPL 3.08 and radio 2.69. Everything seems to be fine. No missed calls. All programs work (touchflo is pretty cool). IPL is still locked on 1.01, even though SPL is 3.08.
I tend to agree with you that something is suspicious concerning the extended ROM. The first symptom I had that something was wrong was after loading Button's ROM, during the customization routine, Signed_DiscoButton8 would not install. Phone locked up and had to soft reset.
Oh, well, at least the phone works. The downside, of course, is that you can't load an original ROM, even though you can load a cooked one. Weird, huh?
Hopefully someone a lot more knowledgeable than I will figure this one out soon. Will keep checking the boards. At least we don't have bricks.
I am having the exact same problem as the 1st post but my ipl is stuck on 2.26. I am using an unlocked device and I have no problem downgrading/upgrading the spl. I also get the 326 error when I try to flash back to the original rom. (I used to be able to do this without a problem - I can't figure out what happened.)
It's really weird and I have search and searched and can't seem to figure out a solution.
which SPL you have now?
sorry.... my spl is 1.01
Right. Assuming your device is working 'normally' are you willing to try something new? If so contact me PM
what have you cooked up this time mestrini? lol
my wiz (at 1.01 still..) is doing a-ok, but always willing to go for something new so we can fix this for the communities sake...
d-lite said:
what have you cooked up this time mestrini? lol
my wiz (at 1.01 still..) is doing a-ok, but always willing to go for something new so we can fix this for the communities sake...
Click to expand...
Click to collapse
sorry to mislead you buddy but acmickey got it all wrong and, instead of IPL stuck at 2.26 and SPL 1.01, he has same as you IPL 'locked' at 1.01
So my theory could not be verified.
cheers