Database Develop

upgrading xdaIII (qtek 9090 )with italian rom 14004_153_1120

HELP MY QTEK 9090 is totally struck when I eas upgrading I've tryed so many times BUT NOTHINGS HAPPENS!!! I'VE ALWAYS RED ERROR MESSAGE ADN ICAN'T GO BACK!!
CAN ANYBODY HELP ME PLEASE!!
THANKS
:twisted: :evil: :?: :?:

i have any problem like your, what error message you have? win ce image error or anyhink like this?? can you get to bootloader?

Topic moved to BA Upgrading etc.
Did you read this page
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade

no i can't!!!
no I can't the pda is completly dead ti gives me the writings
SERIAL
V2.07
AND NOTHING ELSE!!!
I follow the FAQ suggestions but nothings HAPPENS!!!
HELPME PLEASE!!!!
:evil: :evil: :evil:

1)Take it out off the cradle.
2)Take the battery off, and leave it off for about 20 minuts.
3)Make sure that the USB cable is connected directly to your PC, and not through a HUB.
4)Reboot PC, dont start any programs.
5)Put the battery back on you BA, switch it on and Cradle it
6)Follow instructions in WIKI

it work only in eglish version
Thaks Bosjo but works the english version rom only!!
I've discovered , anso I thank you so much, that exist one italian version only for my qtek 9090 the other one once I've tried it
doesen' t work AGAIN!!, I : was been found the same problem...
I'will follow your suggestions...
:evil: :evil: :?:
thanks
Alexj

[please follow bosjo suggestion if u have an english versio, but I need the italian one it's a big probelm for me to install it...damn...!! :twisted:

bosjo said:
3)Make sure that the USB cable is connected directly to your PC, and through a HUB.
Click to expand...
Click to collapse
****, i made a Typo, it should say
3) Make sure that the USB cable is connected directly to your PC, and NOT through a HUB.
It should work with all the roms. (those on the 1.40 link page)

ti's all ok over there
Yeah my fried my cradle is direcly connected to my usb port...
thanks :twisted: :evil:

BAD ROM UPDATE!!
AND NOW : ERROR 102 THE ROM IMAGE FILE IS CORRUPT !!!
I'M REALLY BEACAME NERVOUS..
Any suggestion bosjo??
Please I'm struck again.. :evil: :evil: :evil:

always stuck
Hi my friend after having succes to upgrade my 9090 in english, no way that italian programs, works I've tried to install italian cab files..but. nothings happens.
then I restarted from zero and that'it..
AND NOW : ERROR 102 THE ROM IMAGE FILE IS CORRUPT !!!
and now what should I do please?? The separated files in(verion in WWE) seems not to work !!!!
I'M REALLY BEACAMING NERVOUS..
:evil: :evil: :evil:

Re: ti's all ok over there
alexj10 said:
Yeah my fried my cradle is direcly connected to my usb port...
thanks :twisted: :evil:
Click to expand...
Click to collapse

Well I am lost now.
You say that you can flash a wwe rom, if so which one.
You say you cant flash the ITA 1.40 rom but you dont tell us how you are trying to flash it.
Best is always to start form the begining.
Get your shipped rom back on the device.
Upgrade the radio .....only
empty out the ext rom....
then falsh the CE...only
and if you need help tell us what you did as it would explain how you got the error message. We have no idea what you are doing thus cant help you much.

The program I've first tried named BA_DT_ITA_14004_153_1120.ship
doesent' work !! So Ive my 9090 completly dead, I've red almost all the instructions but now I really dont'know how to move myself, and I'dont remeber the previuos version because is cancelled.the attemp to update to 1.40; 1.40.153; 1.12.00 always fails
I've tryed many times to run the program above, but the error messge is the same : soft reset and restart....
so really do not be able to
Get your shipped rom back on the device.
empty out the ext rom....
then falsh the CE...only
can u hepl me please ??

Ok lets get a wwe 1.40 on your device. (as I am not sure if the ita is Broken)
Follow :
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
1) Take the IMate rom.
2) Download the rom and the MA file.
On device
1) On your device perform a Hard reset
2) Remove the battery
3) Wait 5 mins
4) Put battery in again
on PC
1) Reboot your PC after download
2) Make sure the cradel is connected to your PC with no hub.
3) Turn on device
4) Place it in cradel
Run the upgrade
chose the:
First Method (Quick/Easy) (TYPE II)
Post what happens

country error
thanks for the attempt but the message is country error ...
:evil:

country erroro
[
I've done but..
thanks but the message is :country error....
with the old method applicated at your concept the message is ROM error....and now what's up :?:

What exe are you runing : Name of that file!

file name
the file name is rom 1.13.00
but in th e italian vrsiona the name is ns and anothe rone is nk
Sorry but I'm not so expert mybe isould try the secon method downloading separate file s..??
thanks again.. :?:

There is no file name 1.13.00.exe !

Qtek 9090 Rom Update 1.40.154 German found

Hi all,
we found the update for a Qtek 9090. Here for any who need it to:
http://www.xtrem.cc/html/hochzeitsvideo/qtek9090/BA_DT_GER_14001_154_11200_Ship.exe
greets
werner
http://www.xtrem.cc
http://www.sfx-team.com
http://www.hochzeitsfilm-hochzeitsvideo.com

dead link
please upload to the FTP.

dead link
try this ...
http://www.xtrem.cc/hochzeitsvideo/qtek9090/BA_DT_GER_14001_154_11200_Ship.exe
Cheers,
Hawk

Hochzeitsvideo ??? :lol: :lol:
However, I tried last night to make my XDAIII work with the 1.40.01 ROM, but no way to upgrad that ****. I read something about to use instead of the "BaUpgrade..." the "MaUpgrad..._noID.exe" because sometimes we got some problems with "Country ID Error". I supposed to use the MaUpgrade exe-File with the 1.40.01 ROM Update, the proggi ask me if I want to upgrad from 1.31 to 1.40 ROM vers. and Radio from 1.10 to 1.13 - click OK. done. XDA screen's backlight flashed off and "USB" stands at the top and the Version at the bottom. Ok... after a few sec. the update proggi said: ERROR 120: Model ID Error .... your device isn't designed to work with this patch.
I don't know what tha hell 's goin' on with that thing. Because many other guys in our forum already done this.

do the flash in 3 steps
1) 1.40.1 CE
2) Radio following wiki.
3) Flush the extrom
The 1.40.1 is a type II rom and the radio is a Type I.
Make sure you only use the files that are posted and dont mix them around.
You also might be having problems as your device has a differernt Version Number (that is if you have a camera) thus you need the MA tool.

Hi,
I've done it yesterday night/today morning. I downloaded the vodafone VPAIII update and the Maupdate, extracted the exe to folder and packed the maupgrade in it. started maupgrade "ERROR 120: Country ID Error", aight, "EXIT" started program once more, works ! Great, now I have the 1.40.01 GER ROM and the 1.13 RAdio Version.
And a fully Vodafone branded o2 XDAIII :lol: :lol:
I'll de-brand it today night and install some of the o2 CAB's. But at the moment I'm thinkin' to installe magneto - not sure because of the per4mance probl. :roll:
thx !

spv m3000 (qtek 9100??) flashing the rom

hi
i have a m3000 from orange and i think it is the 9100 if i read it correct
my problem is 2 things
1: i want to put tom tom on the device and it wont work its like it won't let me (i do have the correct version)
2: the languages is in polish and i want to put it in english
i have heard that i should flash it in order to get it in english
can anyone tell me if the flashing is possible
and can anyone tell me why the tom tom can not be installed (is there an install block)
thnx in adv
ps sorry for my english i am dutch :lol: :lol:

TomTom on SPV M3000
Hi,
I have the same device.
Installing TomTom is a snap.
(I used a copy of the maps from my SD-card, so I did not need a reinstall of those)
It's even registered with TomTom.
But TomTom/the SPV won't recognise my bluetooth GPS.
Which I had running for GPSdash.
SO? is anything wrong with the SPV bluetooth??
Hans

Cant Get Bootloader Mode on SPV M5000

HELP Please i was doing an upgrade to wm6 on my SPV M5000 (o2 Exec) and it stoped at 99% and came up with error on the pc since then i cant get it to go to the bootloader bit so i can try again the spv dosent respond to any button just dead PLEASE HELP

nashpatel said:
HELP Please i was doing an upgrade to wm6 on my SPV M5000 (o2 Exec) and it stoped at 99% and came up with error on the pc since then i cant get it to go to the bootloader bit so i can try again the spv dosent respond to any button just dead PLEASE HELP
Click to expand...
Click to collapse
Two scenarios:
1- Flashed wrong IPL/SPL and now phone's dead with no solution possible
2- Problem with battery that can be solved by shorting the pads for which you must make a search for the procedures

How can I upgrade/install wm6x to my spv m200 rom using SD card

Hi dear,
I have HTC Blue Angel (GSM Orange SPV M2000) ( unlocked using other then orange operator) running wm2003 SE.
Model No. PH20B
Operator version 5.40.1.179
ROM version 1.40.00 WWE
Radio version 1.06.02
ExtROM version 1.40.179 WWE
I have lost my USB cabel, and now i want to upgrade my windows.
i need help
1. data cable connections for usb (to build my own cable).
2a. step by step guide specially for spv m2000 to upgrade wm2003 CE to wm6.5(English).
2b. which ROM is best for me, i need office, Multimedia, SMS, PDF etc.
Thanks in advance,
Hashmi

ok, where to start?
welcome to the forum!
1. upgrading via sd card is something, that is practically impossible, people claim, they have done it, but it has never really been confirmed, and i still think it is impossible.
2. the pin layouts of the connector can be found -=here=-, please try google next time, on blueangel connector layout, it was the first result!
3. there are no special instructions for the spv m2000, because it is a blueangel like every other, so the steps are the same, the same can be said about wm6.5, same process as wm5, can be found -=here=-
4. the rom fitting your needs best, you have to pick for yourself, for the things you posted, all the new wm6.5 would be fine. pick the one you like best:
- -=sun_dream's=-
- -=xplode's=-
- -=swampy395's=-
- -=thanhcong_to's=-

Dear,
Thanks a lot, i have done it, and the reason for late posting is my illness. I have also build my own cable with little modification which is charging + communicating.

hi
hey how you make the cable for this,,,, i want it too
chef tony i want the cable for spv m2000
plzz help

hashimhoney said:
hey how you make the cable for this,,,, i want it too
chef tony i want the cable for spv m2000
plzz help
Click to expand...
Click to collapse
There is a link for the pin out in Chef's post. With that you can make the cable. If you don't know how to make cables, don't try this. Simply buy one on eBay.