does this mean its down due to reconstruction...been trying to get on for several hours with no luck
xXxXxXxXxXxX
sheesh still down...im now wondering if anyone has it on rapidshare/megaupload : WM5_AKU3.3_Crossbow_BETA.zip
would be nice, looking for the same WM5_AKU3.3_Crossbow_BETA.zip
i just tried and have no issues connecting to the ftp
Related
I'm running a tilt that as of yesterday I'm not able to update QuickGPS, it says "expired".
I'm getting the "connection failed" message, it seems to be related to the "expiration" notice of QuickGPS since it worked fine for nearly a year and a half so has there been a definitive fix for this? I've read through the prior postings and tried a couple of the fixes with no luck...
Can I just change the entry in the registry that effects the time/expired notification?
Any other thoughts?
Thanks.
TW,
tiger.woods said:
I'm running a tilt that as of yesterday I'm not able to update QuickGPS, it says "expired".
I'm getting the "connection failed" message, it seems to be related to the "expiration" notice of QuickGPS since it worked fine for nearly a year and a half so has there been a definitive fix for this? I've read through the prior postings and tried a couple of the fixes with no luck...
Can I just change the entry in the registry that effects the time/expired notification?
Any other thoughts?
Thanks.
TW,
Click to expand...
Click to collapse
Old problem , but this worked for me, read this thread
http://forum.xda-developers.com/showthread.php?t=333275&page=9
Post 83
SH4Y's QuickGPS Fix.CAB
Yes, that was the fix I tried... I assume it just resets the registry settings.
No luck by the way with that one...
TW,
tiger.woods said:
Yes, that was the fix I tried... I assume it just resets the registry settings.
No luck by the way with that one...
TW,
Click to expand...
Click to collapse
Have you tried the one in Kaiser Tweaks ?
Not familiar with that one? do you have a link to the discussion?
Since I am currently connected via the usb port it appears to still be trying to connect via 3G, why doesn't it know to use the internet connection? Is there a place to set default connections?
Well after jacking with this thing on and off through out the day I finally got it to work.
I connected to the internet via wifi and tried to update QuickGPS same problem, no connection. So, I opened the internet with IE and got a web page, then tried updating QuickGPS, it worked! After that I closed IE and tried updating QuickGPS again and it worked...
So, I tried doing the same with a connection via USB and now I notice that I can't surf the web...? it says "connecting" or "locating"... where is this information stored so I can make the changes necessary?
Thanks,
Hi all
My head's getting a bit sore from banging it against a brick wall while trying to sort my phone out, and I was hoping someone might be able to help me.
I did a ROM flash to Dutty's latest about 1 month ago, and all worked fine. At some point afterwards, I did *something* (possibly running the Connection Setup Wizard - don't ask!), and I lost the ability to get internet transfers over Orange (UK) - mail would just tell me it can't retrieve the messages (check the settings blah blah), and Opera just gave me a Network Error page.
Now, I've chatted with Orange lots, deleted all connection settings and played around with various settings and I'm pretty confident I have that right. On demand (i.e. starting mail or Opera), I can see the session establishment (i.e. the arrows moving over the G or 3G or H marker on the title bar), and the Data Connection indication is set in Comms Manager, but I still can't get transfers.
Note that I have since reflashed the same ROM a couple of times, and both times I have successfully had the internet working for up to about 2 or 3 days, then it goes again. When it does go, I get the Database Update Check appearing almost every time a session is established. I originally put the patch in place to stop this happening, but was worried that might be causing the networking problems so didn't since reflashing the rom this latest time.
WiFi works OK - I'm using a static IP address but I don't think this is causing a problem with GPRS/3G comms.
So, I'm thinking there might be some setting on the phone that I keep changing somehow (not intentionally) which is breaking the routing between Orange and Windows.
Does anyone have any ideas? I'm losing it a bit here, as it used to work fine all the time and now it seems to just stop!
Cheers for any help
Rich
Soft Reset
Does a soft reset fix your problem?
I get this from time to time, i soft reset and all is ok again.
I also get orange safeguard on some sites every now and then even though its switched off.
Nope, once it's gone it's gone. Very strange. Still trying to figure this out, as it's driving me nuts!
Still, it's a good excuse to try out some different ROMs!
Rich
madmezza said:
Nope, once it's gone it's gone. Very strange. Still trying to figure this out, as it's driving me nuts!
Still, it's a good excuse to try out some different ROMs!
Rich
Click to expand...
Click to collapse
i had this a wile back and all of a sudden it just started working again
SOLUTION
If anyone's interested, I found a solution to this and I thought I'd share it.
The problem is due to an issue with 2.03 ROM as far as I can tell (I had Dutty's v4 on the phone) and static ip address on WiFi.
IF you use static ip over WiFi, then when you enter the ip address etc for the WiFi network adapter, it appears to try and use these settings on the GPRS connection too. This is why, when I spoke to Orange, as far as they were concerned everything was working OK.
So, the session establishes to Orange, then I request a page and it try's to use my DNS (192.168.1.1) to resolve the address - all goes wrong at that point. No web, no mail, nothing.
To solve, simply remove the settings from the WiFi adapter.
There may be a better solution to this, but I'm just happy I can have my phone back working again!!!
Rich
OK i got a different rom energy rom, ive followed a few different tuts on this site. got "removehiddenproxy.cab" followed the remove proxy from settings/settingsconnections etc it is gone. now im wondering what software do i actually use to tether my laptop to my cellphone ( no charges )
through USB.
thanks
EDIT: figured it out.
i do have a 500mb plan but how do i know if im getting charged if i did all the edits right.
thanks
Im not sure anyone can give me any insight into this but its worth a shot. I have microcell. For everyone else but my line it works perfectly. But for some reason, my phone will only connect to the microcell...sporadically. This has spanned at least two phones now. Ive tried unregistering/re-registering, I tried power cycling both the device and the phone, Ive even sat on the phone with ATT nothing seems to help. I dont know if this is relevant but my phone is the main phone line so I cant delete it from the device and then re-add it. Im at my wits end, If anyone has ANY idea how to solve this Ill do a dance.
Is anyone else having issues with getting the transfer tool to work? I've tried several ways to make the transfer tool work between my M7 and M8, but it consistently fails with "Wi-Fi connection failed." message. I can get my stuff another way, but it's annoying as hell that something like this doesn't work. Trying to rule out any potential issues with my wi-fi on the phone.
Totally stock, and just tried again with today's update. No go...
Worked fine for me between my M8 and Jewel. It did fail the first time, though.
jackzepplin said:
Is anyone else having issues with getting the transfer tool to work? I've tried several ways to make the transfer tool work between my M7 and M8, but it consistently fails with "Wi-Fi connection failed." message. I can get my stuff another way, but it's annoying as hell that something like this doesn't work. Trying to rule out any potential issues with my wi-fi on the phone.
Totally stock, and just tried again with today's update. No go...
Click to expand...
Click to collapse
turn the connections optimizer off on your m7... it may shutdown your wifi connection if the hotspot have no connection ability
support.sprint.com/support/tutorial/Turn_Sprint_Connections_Optimizer_on_or_off_HTC_Onereg_max/49888-1469