Has anyone successfully installed the Arcsoft MMS 3.5 on the Wizard? ... I have installed it three times:
1st time it would not go into the settings
2nd time it would not connect to the GPRS
3rd time it connects to the GPRS and the % progress thinggy goes up to 80ish or so and stops... and then when i go to the outbox there is a little clock next to it. When i try to send it again it gets the green arrow and then at 80% goes back to the little clock and won't send...
theshrink said:
Has anyone successfully installed the Arcsoft MMS 3.5 on the Wizard? ... I have installed it three times:
1st time it would not go into the settings
2nd time it would not connect to the GPRS
3rd time it connects to the GPRS and the % progress thinggy goes up to 80ish or so and stops... and then when i go to the outbox there is a little clock next to it. When i try to send it again it gets the green arrow and then at 80% goes back to the little clock and won't send...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=291048&page=2
Read Post 11 and 13
what? it works but you can't receive or send them? ...
Well in anycase i had an older version with working settings. I was able to send and receive. I then installed the newer version and the settings stayed there. I do not get an error synchronizing. As I stated it connects and progresses up to about 80% and just stops...
So now I have realized that after it gets to 80% it just hides and if i hit the icon on the taskbar it shows that it goes either to 99 or 100% but then stays in the outbox with the clock next to it...
And I also realized that I can receive mms'es... anyone know why they won't send?
theshrink said:
So now I have realized that after it gets to 80% it just hides and if i hit the icon on the taskbar it shows that it goes either to 99 or 100% but then stays in the outbox with the clock next to it...
And I also realized that I can receive mms'es... anyone know why they won't send?
Click to expand...
Click to collapse
I'm having the same problem. Did anyone find a resolution?!
anyone find any fix for this yet?
Related
I've set up automatic mailbox checking every 15 minutes. Works fine in general, but I've found two issues with it:
1) I've used KaiserTweak to disconnect active data session automatically after 1 minute of inactivity. Work ok, unless phone is sleeping. So, for instance, if GPRS/3G data connection for automatic email check is initiated while phone is sleeping, it WON'T turn off after 1 minute. When I switch phone back on from sleep and keep it awake for more than minute - then it will disconnect. Is there any way to overcome this problem?
2) Usually, when new SMS message comes in, phone is awaked and I can see the message straight on the screen. Unfortunately this is not the case with emails - when new mail arrives through automatic check, I can only hear new email sound and light starts flashing amber, but phone iself is still sleeping, and I need to turn it on manually.
Anyone stepped into these issues before and found any solutions? Thanks in advance.
eva_d said:
I've set up automatic mailbox checking every 15 minutes.
Click to expand...
Click to collapse
How did you do that ?? Serious question, I can't find a way to do it on my kaiser.
compact_bijou said:
How did you do that ?? Serious question, I can't find a way to do it on my kaiser.
Click to expand...
Click to collapse
It's dead easy - when you set up a new mailbox through wizard (username, password, servers etc.), the last screen asks whether you want to check email automatically every xx minutes/hours or manually...
eva_d said:
It's dead easy - when you set up a new mailbox through wizard (username, password, servers etc.), the last screen asks whether you want to check email automatically every xx minutes/hours or manually...
Click to expand...
Click to collapse
Ah. Thanks for that, been bugging me for days
I'll keep an eye out for the issues you're having, see if it''s the same with my phone.
Ill repost in here, as i know what its like when a new thread is started, the first few replies are to search ... this is proof i have tried
Im also noticing that the "disconnect after 1 minute" doesnt work when in standby mode, which kinda defeats the object. Is there a fix anywhere so it disconnects after a minute even while in standby mode ?
Hey!
I seriously need some help here. Toolbar clock keeps changing. Suddenly it is on time and then the next time I turn it on it might have gone back 2 hours.
Example.
I turn it on and the clock shows 15.34.
I check my calendar and turn it off (standby)
I turn it on again the next time, say after 30 min. The clock SHOULD show 16.04, but it might say 07.17.
Anybody had the same problem?
I tried calling out, send a message, etc. but the clock does not change. Sometimes it goes back to normal, ie. it displays the correct time without me doing anything, but today it has not and the time is still wrong.
This is seriously annoying. I use my phone as my watch and I need it to display the correct time at ALL times.
Thanks
Hi, helangen.
I had a similar problem involving time. I kept finding that every so often my appointments kept changing by an hour. Everytime I went to the clock settings it showed plus one hour. So changed it back and then it would do it again and change to a time zone ahead.
Under "settings/personal/phones" there is a tab that says time zones. this controls whether or not the phone changes the time zones and clock automatically.
Personally, i erased my phone using clear storage under "settings/system" and started a fresh making sure I choose the right time zone and regional settings first off. Then entered all my reoccuring appointments and restored a copy of my PIM with the latest version of PIMBACKUP. At least this saved me entering all my contacts and kept my sms and mms.
I then unticked the automatic option I mentioned earlier and have had not one time related problem since.
Don't know if this will help but it can't hurt to share as you never know..
diigibio (diigimatrix)
diigibio said:
Hi, helangen.
I had a similar problem involving time. I kept finding that every so often my appointments kept changing by an hour. Everytime I went to the clock settings it showed plus one hour. So changed it back and then it would do it again and change to a time zone ahead.
Under "settings/personal/phones" there is a tab that says time zones. this controls whether or not the phone changes the time zones and clock automatically.
Personally, i erased my phone using clear storage under "settings/system" and started a fresh making sure I choose the right time zone and regional settings first off. Then entered all my reoccuring appointments and restored a copy of my PIM with the latest version of PIMBACKUP. At least this saved me entering all my contacts and kept my sms and mms.
I then unticked the automatic option I mentioned earlier and have had not one time related problem since.
Don't know if this will help but it can't hurt to share as you never know..
diigibio (diigimatrix)
Click to expand...
Click to collapse
Cheers. I'll give that a try. It's not that the clock just changes with an hour, but it is totally random how it changes. I might have to do a hard reset ;(
I can confirm that this solution worked. Thanks. Turned off the automatic timezone change and the clock have been correct for three days straight.
hi guys..
i've now had my touch diamond in 6months, and i must say that i havent had anything else than tons of problems with it :/..
It very often just freezes, when i want to open a text message in my inbox, and 60% of the day it search for signal... its like
100% signal for 1 hour.
then loses it for 10 seconds, and then regaining.
100% signal for 10min.
then losses it for 10 seconds.
100% signal for 10min
then loses it for 10 seconds.
If i then turn off my diamond and turns it on again. start from part 1)...
Also as i stated in my title.
it some time ago, started to ALWAYS have 1 new text message in my inbox.
even if i do a soft reset, turns off my cellphone, or delete ALL messages.
It still says 1 new text message.
Have any of you guys had anything like this?
I can tell i have the following:
Radio: 1.00.25.05
and standard touch diamond setup
Kind Regards,
ThiaZ
you need to check all of your inboxes i had the same problem message from microsoft about messanging was in outlook inbox even when i dont use it
it says its in the text messages inbox..
and theres only one
upgrade upgrade upgrade
from what i understand is that you're using 1.3 rom right?
where do i check that?
edit:
ROM version: 1.93.775.1 DAN
Rom date: 07/15/08
Protokolversion: 52.29.25.12H
ok so i'm going to try and write down everything that is going wrong with my phone right now.
when i boot it up, touchflo will not start, i just see calender and contacts on the bottom. if i click on contacts, it takes a while to load, then just says enter a name on the top. with no list of my contacts.
i can not receive or send calls. i just had a friend try to call me and the middle round button and the send button blink, but no screen pops up saying i have a call. i try to press send and nothing happens.
i can barely send a text message, it takes about 10 minutes for the text message to load if it even loads. can't browse the internet.
calender works fine, google maps works fine, small games work fine, like teeter. age of empires will not load though. messenger will not load.
i can browse my programs though and go into file explorer.
activesync is giving me a message when i try to connect saying
"Activesync cannot connect ot the windows mobile powered device. to troubleshoot the problem, click ok."
the scan after says this
Unable to establish a connection between the PC and the device. Get up-to-date solutions to common connection problems. Please click the following link: http://go.microsoft.com/fwlink/?LinkId=65257
when i was drunk and camping on the weekend my phone gave me a message saying it could not start because it was not properly turned off the last time and said i would have to press the volume button to restart it, which i didn't do cause i didn't want to lose my contacts.
has anyone else had these problems? any way to fix it? or am i just going to have to do a hard reset?
also i'm not sure if the Pim Backup v2.8 works for the diamond? i'm in there reading right now.
another problem i noticed is that when loaded a text message, if its the first text i've gotten from a number it loads really fast, but when i load one from someone that i've communicated with for a while, it takes forever to load if it does. most times it just doesnt load and freezes for a bit.
I think we need some more information. Maybe if you answer these questions, someone can help you, before you'll have to hard reset..
The ROM version?
The TF3D version?
What software, like lockers, screen rotators, key mappers, task managers, battery savers etc. are running in the background (as a service)?
What does Settings - System - Memory say about free program memory?
Anyway, PIM Backup works fine on the Diamond. Good luck!
Hi,
Ive tried both versions of Fresh 2.1 roms and both do the same thing
it says i have 30 voicemails but i really have none.
I do have GVoice, but ive checked both my sprint and GV and both show no new Vmails.
i went to settings > calls > delete vmail icon
which works for a few mins but then it pops back up
normally i wouldnt care all to much but what happens when i talk on the phone, i guess my check rubs on the phone and i always do 3 way calls with my vmail and whoever im on the line with and it is kinda annoying
Anyone who may have any ideas please shed some light??
Just clear the notifications..... not that hard.......
HeroMeng said:
Just clear the notifications..... not that hard.......
Click to expand...
Click to collapse
As I said, I've done that and it pops up 30 seconds later
any1 have any other ideas?