Hi people,
how do you start the stereo audio bluetooth? I have to 1. start bluetooth 2. start headsset iphono mini 3. go to bt devices configuration 4. long press and 5. select stereo audio.
There is no quicker option? Somebody with iphono mini get it connected automatically when open both bluetooths?
Many thanks!
well i dont know why you must do so much - i have bt on wizard turned on al time and im only turn on my ht820 and in 2 seconds its ready to work...
other headsets work the same?
slimag said:
well i dont know why you must do so much - i have bt on wizard turned on al time and im only turn on my ht820 and in 2 seconds its ready to work...
other headsets work the same?
Click to expand...
Click to collapse
I dont have always bt on, anyway the problem is that when I power up the bt headsets they don't connect automatically, I have to do it manually.
I have the same problem and have the iPHONO mini headset. The headset works great but only works once! Once the BT is turned off and the headset is turned off, the wizard of course reverts to playing music through the speakers. However, once BT is back on and the headset is back on, even though it works for calls, the wizard does not play music through the headset. You have to go to BT settings, uncheck the "Wireless stereo" option, hit save, re-check it and hit save. As soon as you hit save the second time, the headset works fine again.
squawk said:
I have the same problem and have the iPHONO mini headset. The headset works great but only works once! Once the BT is turned off and the headset is turned off, the wizard of course reverts to playing music through the speakers. However, once BT is back on and the headset is back on, even though it works for calls, the wizard does not play music through the headset. You have to go to BT settings, uncheck the "Wireless stereo" option, hit save, re-check it and hit save. As soon as you hit save the second time, the headset works fine again.
Click to expand...
Click to collapse
I, too, am having this issue with my iPhono Mini. This headset worked great and as advertised with WM5, but after upgading to WM6, you have to tell the handset that you have a headset everytime, all over again.
I've loaded BT fixit cabs from various areas on this site with no help.
Can't someone look into this? It worked before, WM6 hosed it.
Thanks!
i had it but i use a tekosoft a2dp toogle it works great the problem in the lag is solved with a post in the universal section
you make a dword value in
hklm/drivers/bulit in /bt2snd
as priority 256 with the value 60 soft reset and make your iphono blow up your ears
cheers
Related
Hi all.
I'm using the aku3.3 v2 rom 8Mbpp and loving it. However I have a strange A2DP problem. The headset (BlueTake iPHONO Mini) works great but only works once! Once the BT is turned off and the headset is turned off, the wizard reverts to playing music through the speakers (of course). However, once BT is back on and the headset is back on, even though it works for calls, the wizard does not play music through the headset. You have to go to BT settings, uncheck the "Wireless stereo" option, hit save, re-check it and hit save. As soon as you hit save the second time, the headset works fine again.
Anyone any ideas?
Cheers,
~sq!
I have a set of the ht820 headphones. When I paid the Tilt with the ht820 everything works fine but if I turn the headphones off and back on the phone does not seem to be able to find them again. Am I doing something wrong? I never had this problem with my 8125.
If I go into the Bluetooth settings and select the options for the ht820 and select set a stereo wireless then it will work but it there no way to have auto detect that?
I also have a set of HT820. My problems sound worse than yours. My music skips VERY BAD!! I'll get 10 seconds of music then 3 seconds of silence. Do you have this problem?!? As far as connection, yea I also have to go into BT settings to get it to see the headphones again...
Thanks
I've got the same experience. As to establishing the connection, same here as it has to be done from BT settings. But I have to do the same thing to establish a connection between the headphobes (Anycom BSH-100) and my notebook. I'm not saying that this is the best way but then the Tytn is not that different from a normal PC.
I do get occasional/regular skipping when playing music/video. I was thinking that it was a problem with my headphones, but now I'm thinking it's a problem with the BT implementation of the Tytn.
Figured a few things out. For the HT820, if I press the button on the right speaker once every few seconds, it kicks on the BT connection without having to go into BT setting on the Hermes 2. As for the sound skipping, I used the Kaiser tweak and changed the bitpool from 64 to 48 and now it only skips once every few songs!! Getting so close to now having a full fledged music player, too!! Yahoo!!
Hi there,
FIRST POST so go easy on me.....
I have a headset installed in my motorcycle helmet that has been working OK (via Bluetooth) with my previous mobile (Nokia E70). I could take calls as well as listen to music on the headset.
I recently upgraded to the Kaiser phone and tried to pair it with the headset last night. After recognising it it presented me with a "Set as Hands-free" checkbox (which I selected). The "Set As Wireless Stereo" option was not presented (it is greyed out)... and, I guess, as a result, I cannot listen to my music files (or the GPS instructions) through the headset.
Any ideas would be very welcome. The phone functions work fine - I can make and receive phone calls without problems.....
regards
alexis
A2DP - Old bluetooth
Alexis,
I have the same problem. I do not have a helmet, but a carkit.
My carkit does not support A2DP. I think your helmet does not, also.
You need A2DP for this option.
But... There was a cab-file for the Hermes. I installed it, but that even does not work. I will start a new thread with a question about this.
Temba
This may have been talked about before but my search didnt come up with anything so i thought i'd ask
i have a sony bluetooth headset and when i make and recieve calls it works fine
when i listen to music it comes out of the speaker on the phone
i guess this is a known 'problem' .. is there a setting somewhere i need to set
thanks in advance guys
To get standard audio thru the headset it has to support Wireless Stereo otherwise it will only work as a voice command/phone unit.
If you have a BT headset such as the Promate PM-2006 (which looks like a small pair of headphones with a mike) when paired to the phone it will show two profiles, 'Hands Free' and 'Wireless Stereo'
To set up audio thru this headset you go to 'Settings' 'Bluetooth' 'Devices', hold the stylus on the paired device you want to use and select 'Set as Wireless Stereo from the small drop down menu.
yeah i have both wireless stereo AND hands free selected .. thats what was confusing
Just to be sure...
You need to select both profiles when you first pair it.
But every time you want to listen to audio through it you need to go and select it for 'Wireless Stereo'. The phone then connects to the headset for that purpose.
Hope that's clear.
cheers .. i'll take a look at that ..
seems a bit crap tho eh??
Same on all windows devices, you have to tell them to play the audio through BT whereas a phone is listening for a headset.
True, a quick connect button would be much more help and I am sure if you search around you can find one.
ive got a paitr of motorola ht820's they just automatically pair up and sort out the myusic and calls when i turn bluetooth on however, they dont play nice when wifi is turned on
I've got a Verizon tab and am trying to connect to a Bluetooth headset so I can make video calls with Fring or something else with a little more privacy than using the speakerphone.
I can't get the tab to find the headset!
I have successfully paired with a Bluetooth keyboard, mouse, and the Jawbone Jambox. While the audio out on the Jambox works fine, the built in mic does not work for speakerphone calls with the tab either.
Anyone have any idea what I can do?
Refer to the headset menu to perform a hard reset on it (on a nokia headset this done by simultaneously pressing power and action buttons till it alternates its LED between red and green). Activate the bluetooth on the tab and make it discoverable. In bluetooth setting scan for devices till the headset appears.
Same Issue
slamorte said:
I've got a Verizon tab and am trying to connect to a Bluetooth headset so I can make video calls with Fring or something else with a little more privacy than using the speakerphone.
I can't get the tab to find the headset!
I have successfully paired with a Bluetooth keyboard, mouse, and the Jawbone Jambox. While the audio out on the Jambox works fine, the built in mic does not work for speakerphone calls with the tab either.
Anyone have any idea what I can do?
Click to expand...
Click to collapse
I have a TMobile tab with the same problem. It connects to my btooth antenna, but not my two btooth headsets.
My headset bluetooth also facing the same problem. I read the manual and it say i have to press the answer button for more than 8 second as a hard reset to the headset. Later my tab can detect the headset.
You should read the manual and try to do hard reset to your headset
Sent from my GT-P1000 using XDA App
Can't seem to find out how to reset the headset. Nothing in the manual or Google (it's a Samsung HM1100).
It's weird - the Astro Bluetooth network shows the headset in its Bluetooth explorer but the GT will not even see the device to pair to.
Firstly you open bluetooth under setting, wireless & network. Press scan for bluetooth. Result, it will not show any bluetooth found. Press back button once only. And again open bluetooth setting. Then you will see all bluetooth devices already detected.
This is a bug. I happen all the time to me.
Please try it
naimmkassim said:
Firstly you open bluetooth under setting, wireless & network. Press scan for bluetooth. Result, it will not show any bluetooth found. Press back button once only. And again open bluetooth setting. Then you will see all bluetooth devices already detected.
This is a bug. I happen all the time to me.
Please try it
Click to expand...
Click to collapse
Still No Luck.