Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER
FREIMAURER said:
Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER
Click to expand...
Click to collapse
I can assure you that PIE in WM6 opens http:// addresses too. I haven't tried connecting through GPRS, though. Only WiFi.
Maybe it's a DNS problem?
Hi Risidoro,
which WM6 are you using? I use the PDAVIET3 and I had the same issue with
the PDAVIET1.
DNS sounds good but it worked on the previous roms and I use the same settings as before. Maybe there is some registry entry in the PDAVIET causing
this phenomena!?
Thanks for helping!
im using the Original WM6 rom and im not having 1 problem.. maybe is PDAVIET3 rom.. i have been using PIE on Wifi and GPRS and it always connects
I'm using the BigBrother's rom AKA clean wm6 and i've no problem so far. IE works as always...that is: BAD (but at least it opens http)!
The best browser for WM, the real usable one, is Picsel Browser.
It can't be bought online (picsel only sells it to device manufacturers) but... WM6 couldn't be bought too... if you know what i mean
I do use pdaviet3 and have no problem opening http pages with GPRS in IE.
risidoro said:
The best browser for WM, the real usable one, is Picsel Browser.
It can't be bought online (picsel only sells it to device manufacturers) but... WM6 couldn't be bought too... if you know what i mean
Click to expand...
Click to collapse
Well, I searched for it and found it, will try it, Thanks....
vijovame said:
Well, I searched for it and found it, will try it, Thanks....
Click to expand...
Click to collapse
Is a little weird, but is very good, just don't like how to zoom the pages, I use PIE plus in desktop mode....
Here check your registry and see if it looks anything like this. My browser was acting up and saying that invalid url. so i fixed the settings and now everything works awesome on it. heres the thread http://forum.xda-developers.com/showthread.php?t=291580 . its the last post
vijovame said:
Is a little weird, but is very good, just don't like how to zoom the pages, I use PIE plus in desktop mode....
Click to expand...
Click to collapse
Double clic and move the stylus up or down. It's all explained in the first page that's shown when you start the program.
bye
risidoro said:
Double clic and move the stylus up or down. It's all explained in the first page that's shown when you start the program.
bye
Click to expand...
Click to collapse
Thanks for the tip Risidoro! This really is a GREAT browser!
vijovame said:
Well, I searched for it and found it, will try it, Thanks....
Click to expand...
Click to collapse
any hints as to where to search for it? ive been searching for an hour now and no luck... it seems like a really cool program from all the stuff ive read though lol
FREIMAURER said:
Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER
Click to expand...
Click to collapse
I think you have bad gprs connection settings, as you wrote you can only open through wsp:// it means you are connecting to WAP service where only connection to internet is through APN (Access Point Name) so you have to use wsp (wireless session protocol). I'm assuming you set up your connections using some cab file, don't you? Go to Settings/Connections/Connections/Manage existing connections and check how many connections you have there if it's only one than it's for shure connection through WAP APN and you have to change it to normal internet connection if there are more than one connections check the proper settings for internet instead 'auto pick' if any of this does't work make your own settings as I can see for German O2 you have to only put APN name 'internet' and nothing else no passwd or login. Hope this info helps you
deviusdragger said:
Here check your registry and see if it looks anything like this. My browser was acting up and saying that invalid url. so i fixed the settings and now everything works awesome on it. heres the thread http://forum.xda-developers.com/showthread.php?t=291580 . its the last post
Click to expand...
Click to collapse
Hi deviusdragger,
tried your help but to no avail. The PDAVIET 3 really has different settings but changing them and rebooting did not really fix the problem.
The keys you are mentioning are only under HKLM did you also change yours there or do you have them under HKCU as well?
Thanks a lot anyway for your help!
shamus said:
I think you have bad gprs connection settings, as you wrote you can only open through wsp:// it means you are connecting to WAP service where only connection to internet is through APN (Access Point Name) so you have to use wsp (wireless session protocol). I'm assuming you set up your connections using some cab file, don't you? Go to Settings/Connections/Connections/Manage existing connections and check how many connections you have there if it's only one than it's for shure connection through WAP APN and you have to change it to normal internet connection if there are more than one connections check the proper settings for internet instead 'auto pick' if any of this does't work make your own settings as I can see for German O2 you have to only put APN name 'internet' and nothing else no passwd or login. Hope this info helps you
Click to expand...
Click to collapse
Hi shamus,
thank you for your reply! No I do not use a cab I perform the settings manually. There is more to it than entering a APN, here is all I do and how
it is documented in the depths of the german O2 website
modem: CELLULAR LINE GPRS
APN: wap.viaginterkom.de
USER/PASSWORD/DOMAIN: empty
PROXY: 195.182.114.52
HTTP: 195.182.114.52:8080
WAP: 195.182.114.52:9201
SECURE WAP: 195.182.114.52:9203
SOCKS: empty
Only by entering these informations I am surfing on the O2 wap flatrate and
by entering the proxy like this I can surf to http sites as well!!!
And exactly this feature seems to have been taken from me
Well not really as I can enter wsp://... I am still able to surf but using
google and hitting search results gets really anoying cause for every search result I will have to change the url from http to wsp !!!!
So if somebody out there might really have the antidote for my prob I'd
be most happy and if not I´ll consider switching back to Farias rom as this
WM6 stuff is only for evaluation
Thanks for helping!
Hmmm seems it's good lead. When your connection is through proxy server in this case 195.182.114.52 then you have to have all connection setup in "my work network" disable "My ISP" in connections/advanced/select networks by choosing only "My work network" in both fields then setup Proxy server and setup only HTTP proxy remember 8080 port, left all other protocols empty (wap, socks, secure wap). Try if it works, if not than try to setup WAP proxy to 8080 port also. Since browser connects all the time to wap apn in this way you can trick it. Other unusual possibility is your provider stoped to serve http proxy or changed some settings.
shamus said:
Hmmm seems it's good lead. When your connection is through proxy server in this case 195.182.114.52 then you have to have all connection setup in "my work network" disable "My ISP" in connections/advanced/select networks by choosing only "My work network" in both fields then setup Proxy server and setup only HTTP proxy remember 8080 port, left all other protocols empty (wap, socks, secure wap). Try if it works, if not than try to setup WAP proxy to 8080 port also. Since browser connects all the time to wap apn in this way you can trick it. Other unusual possibility is your provider stoped to serve http proxy or changed some settings.
Click to expand...
Click to collapse
Hi shamus,
tried all of your ideas but still it did not resolve this issue! I always choose "My work network" because the ISP does not let me set up the proxy.
My provider still features this service because if I use any of the normal WM5 roms everything works perfectly!
Thanks for helping!
PS: this is really starting to pi** me off
FREIMAURER said:
Hi shamus,
tried all of your ideas but still it did not resolve this issue! I always choose "My work network" because the ISP does not let me set up the proxy.
My provider still features this service because if I use any of the normal WM5 roms everything works perfectly!
Thanks for helping!
PS: this is really starting to pi** me off
Click to expand...
Click to collapse
Hey FREIMAURER....we met in another thread......
I had a similar problem...you may have to flash your factory rom just to get your provider network settings. Flash back to your current rom and then use that cab file to set your device up so that your carrier's settings show up in Connections. At this point you can modify the wap address and your proxy settings. This will get you on the internet.
MMS is another beast!
PDAviet3 does not include MMS....you have to install ArcSoft MMS for it to show up on your device. I recommend you install ArcSoft MMS before you install your carrier's settings cab because your carrier settings include MMS configurations but once they are installed...you can not change them. If your MMS works, you're good. If it doesn't, un-install ArcSoft MMS, re-install ArcSoft MMS and manually input your settings.
Sounds like alot of hard work but it's not that bad.
PM me if you need help
Cingular settings
Cingular settings CAB files can be found here:
http://forum.xda-developers.com/showthread.php?t=292245
5th post down
What happened....did everyone give up..?!?!
Related
Has anyone been able to get onto AT&T's (Cingular's) Streaming video site with their unlocked TyTN II here in the States?
http://cingularvideo.cingular.com/
It does not detect the phone as a 3D phone, or so it says.
I had no problems getting to the http://device.home/ page though.
I just get a blank, white screen.
doesn't work for me either... Same error. Not a 3G phone.
-Mc
isn't there a reg hack where you trick the the CV side into thinking you have a Samsung Blackjack, which is a supported device?
This link has a 8525.cab that allows you to get technical difficulties (for me at least, i don't have wireless.cingular.com:80 set as proxy)
http://www.gadgetech.info/treo/hacks/registry/
shogunmarks cab with realplayer could be your huckleberry too
http://forum.xda-developers.com/showpost.php?p=1095177&postcount=51
doesn't work for me either.
zetajunkie said:
isn't there a reg hack where you trick the the CV side into thinking you have a Samsung Blackjack, which is a supported device?
Click to expand...
Click to collapse
I dont remember the exact change (been a while) but yeah look in the Hermes forum....also you will find MANY threads so look for the newer ones as ATT and WM6 went through stages of what works for this. It is a PIE issue.
Read into the first dozen posts or so:
I don't live in a 3G area so I can't test...
http://forum.xda-developers.com/showthread.php?t=282651
-Mc
I got it too work, no problem. Below are my instructions.
TyTN II Users
Here are the instructions for access MediaNet and Cingular Video, or just about any at&t/Cingular link just like on the Tilt.
It’s really simple to access MediaNet. Even on at&t branded phones you have to switch from My ISP to MediaNet so you can access the MN home page or Cingular video. Here is how you do it.
Go to START, SETTINGS and select CONNECTIONS.
In the connections, select CONNECTIONS Icon.
At the bottom, select ADVANCED tab.
You will see a SELECT NETWORKS option.
Under Network Management, change the first option for MY ISP to MEDIANET.
Now click ok and reselect TASK (bottom left tab). Now your Connections now say MediaNet with a proxy option below it. We need to verify the proxy info is correct.
Select edit my proxy server, then select Advanced. You will see a window with server/proxy info. The first one is HTTP. It should have the following (wireless.cingular.com:80). If it doesn’t, select HTTP and enter the info. Now check SOCKS. It should have (LOCALHOST:1080). Again, enter it if needed.
Now you’re done. You only had to do this one time. When you done with MediaNet, all you do is switch back to MY ISP for normal surfing.
Before you continue, you have to make a change in your registry so that the proxy knows your phone as a branded phone. I choose the Tilt for this.
If you know how to use a registry editor, then look for this entry on you phone.
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC_TyTN_II Mozilla/4.0"
You need to change the CustomBase to HTC-8900/1.2 Mozilla/4.0
This is what is listed for the Tilt
Save your settings and that’s it. By changing that info on my TyTN II, I am now able to access Cingular Video and MediaNet home page. I had to change my connection from My ISP to MediaNet so it would go through the Proxy.
I can now access my account information and a bunch of other areas I wasn't before on my TyTN II.
Cv http://cingularvideo.cingular.com
MN http://device.home
Note: In order to play the videos, you can download a PocketPC version of Real Player since the files are in RM format.
Does your HTTP setting stay?
Whenever I set the http to wireless.cingular.com I can then get to the CV but then after a while the screen says it cannot connect to the internet. I went back to the http setting and learned the http setting to wireless.cingular.com is not there anymore. Looks like it doesn't want to stay there.
I changed my registry to make it think I am using an AT&T Tilt instead of the HTC TyTN II.
Can anyone help?
Got It Working
I only had to do this on my HTC ADVANTAGE...
If you know how to use a registry editor, then look for this entry on you phone.
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC_TyTN_II Mozilla/4.0"
You need to change the CustomBase to HTC-8900/1.2 Mozilla/4.0
MEdia Net Proxy info
I believe that the proxy info for the MEdia Net as ISP is hard coded into the ROM as it was for the Hermes.
So all you would really need to do is revise the "model" info for PIE in the registry to what they said earlier.
Do you need to do something to get RealPlayer to stream the video? I'm able to get to the video pages, but when I try to play them, they download instead (wow, there goes all my RAM!)
I did find that this only works in IE, my Opera browser still gives the error page for Cingular Video.
Read what I posted here. http://www.mobileplanet.com/ft.aspx?k=99281
When you select a video to play, it downloads a video.ram file, which contains nothing but a URL. Real Video opens this video.ram file, reads the internet URL, and then plays the video from that URL.
Note: Each time you select a video from the web site, it'll download and overwrite the last video.ram file you downloaded/saved.
Okay, changing the network settings on RP seems to have fixed it.Thanks for the great guide!
victorcho said:
Whenever I set the http to wireless.cingular.com I can then get to the CV but then after a while the screen says it cannot connect to the internet.
Click to expand...
Click to collapse
Check your e-mail accounts. POP/IMAP accounts allow you to set the connection they will use. If they don't match "Media Net" and go out to check e-mail, you'll get this error because the mail doesn't think the network's available.
There's also a setting in RealPlayer to specify the network that I had to manually change. Once I did all that, I was watching The Colbert Report clips on my phone.
ha im an idiot i was getting the temp difficluties screen but i was connected to wifi took it off and im fine that was dumb but i just tried a video and got failed to connect! lol well ill see if i did somethign else dumb lol
switched the real player settings to mn and were all good
That fix worked for me! I am able to surf/check e-mail while using the MediaNet connection - is there any real need to switch connections all the time? It seems about as fast as my non-proxy connections, but perhaps it isn't.
i can get the list of videos playingm, but when i click on it to watch it, it says " can not connect" real player......how can i change this
any still having problems with real player here u go
Go to ur tmp-file folder (normally "C:\Documents and Settings\%username%\Local Settings\Temp\"
u will find quite a lot of folders in there, but if u search (f3) for files ending with *.cab there will pop one file named:
"realplayer.cab" ^^
copy it to ur ppc by using active sync
this worked for me hope for u too
I have tried all of these things and it still tells me the clip is unplayable.
I can only access yahoo.com web page. when i try to go to MSN or other web pages it only display white screen. What am I doing wrong? is there a setting I goofed? How do I fix it? Thank you.
I have full MediaPack from ATT.
Try disabling the proxy. Btw, what does your username mean? bird?
kareem9nba said:
Try disabling the proxy. Btw, what does your username mean? bird?
Click to expand...
Click to collapse
When I enter for example www.msn.com the connection process starts with locating then opening, then white screen ... Looks like I am connected however I do not show the web page. I am able to access Yahoo.com however. I cleared all cookies, did a SR and same problem. This issue happens just recently. The only place where I can see proxy settings is the connection tab, and the proxies are disabled.
Asfoor ......... = Bird .... thus the Avatar...
I tried the WiFi connection off of my home wireless and I am able to connect just fine to any web page. Only when I am on EDGE or GPRS / 3G when the problem happens and I can not connect to any other than Yahoo.com. ... Now MobiTV, XM, Resco radio are all fine. I can connect and fast i might add.
Only the Internet access where the problem exists.
Ok then my bad, try ENABLING the proxy if your on that. haha i knew it meant asfoor, because it's arabic
kareem9nba said:
Ok then my bad, try ENABLING the proxy if your on that. haha i knew it meant asfoor, because it's arabic
Click to expand...
Click to collapse
I think it has to do with the Mediamax plan... but what is confusing is that I am able to access www.yahoo.com and that... anything else renders blank page.
it has nothing to do with media max. i have media max and i can surf any website. try doing this, go to start,setting,connection,connection,advance,select network, choose media net,edit, proxy setting, unchecked the box "this network uses proxy server to connect to the internet". if that doesnt work try using another browser like opera mobile or mini opera. Or do a hard reset
COF23 said:
it has nothing to do with media max. i have media max and i can surf any website. try doing this, go to start,setting,connection,connection,advance,select network, choose media net,edit, proxy setting, unchecked the box "this network uses proxy server to connect to the internet". if that doesnt work try using another browser like opera mobile or mini opera. Or do a hard reset
Click to expand...
Click to collapse
Thanks for the tip about opera Mini. I am using as we speak and it is slick. I am wondering if there is a way to create a short cut directly to Opera instead of going through Java first! can you suggest a way? thanks again.
I need access to a direct ftp port with the http://65988.0023.XXX style connection but I can't get access to it unless I am using WIFI? what setting can I change to stop this?
try disabling the proxy settings, sometimes bypassing your networks proxy settings will open up all sorts of options you where once blocked from accessing
how would I go about that? I didn't know I was behind proxy settings? And do I need them to access medianet?
in your connection settings go to manage existing connection, select proxy settings and untick the box that says this network uses a proxy server to connect to the internet and leave the box ticked that says this network connects tothe internet.
Ive disables my proxy settings for t-mobile Uk internet settings and now it connects alot faster and pages seem to be loading faster also
doesn't work... Darn this sux... I test it with www.msn.com and it still makes it pull up msn.mobile... how annyoing...
bump anyone have anything on this?
I would really appreciate help with this because I have to access a program that I can't otherwise.
If you're looking to hit an FTP site, then I'd grab an FTP client for WM and stop futzing with IE in the first place. Or am I misunderstanding what you're doing?
not it is not an ftp it is an http://112.2232.224:2324 type of site... that is all.
Don't know your carrier but here's a cab that disables the "hidden" proxy in AT&T and one that restores it. Worth a try?
RemE said:
Don't know your carrier but here's a cab that disables the "hidden" proxy in AT&T and one that restores it. Worth a try?
Click to expand...
Click to collapse
i have att... thanks trying now...
RemE said:
Don't know your carrier but here's a cab that disables the "hidden" proxy in AT&T and one that restores it. Worth a try?
Click to expand...
Click to collapse
YEAAAAAAAAAAA I don't know what happened... but since I installed your thing it works perfect. damn I was getting peaved... when I go to msn.com thought it still brings up msn.mobile though. Well at least I can go to anywebsite I want now.
Do I ever need to put the proxies back? I guess I should just put this on my card just in case.
Again, Thanks... What else am I able to do now?
In the Tilt, Internet Explorer's user agent string is locked to mobile internet, meaning that websites will see your device as a mobile device. If the site has a mobile site, it will automatically re-direct you to that. In WM5 devices, you could use software to change IE's user agent string to make it look like a desktop, but on the Tilt, you can't.
You'll need to get Opera Mobile if you want the internet to see your phone as a desktop.
I think for what your trying to do you need to use the MY ISP settings instead of medianet settings. But I don't know what they are anymore. I think you will also need the right data plan to use them.
does PIEPlus User Agent setting work with Tilt?
stpete111 said:
In the Tilt, Internet Explorer's user agent string is locked to mobile internet, meaning that websites will see your device as a mobile device. If the site has a mobile site, it will automatically re-direct you to that. In WM5 devices, you could use software to change IE's user agent string to make it look like a desktop, but on the Tilt, you can't. . .
Click to expand...
Click to collapse
Is this true even if using PIEPlus? PIEPlus Tools>Options Plus>User Agent allows setting User Agent to IE 5.5 or IE 6.0 (which should be seen by websites as a regular computer) in addition to the default PIE setting (which is seen as mobile)
cushcalc said:
Is this true even if using PIEPlus? PIEPlus Tools>Options Plus>User Agent allows setting User Agent to IE 5.5 or IE 6.0 (which should be seen by websites as a regular computer) in addition to the default PIE setting (which is seen as mobile)
Click to expand...
Click to collapse
what is pie plus. First off, I tried using opera mobile desktop setting and when I went to www.msn.com it still comes up as mobile. Do I have to configure something further?
Lastly, I just told you all that the program for turning off the hidden proxies worked. So for what I was trying to do those programs the other person posted worked nicely. However, it still sucks that I can't bypass the mobile crap... There is a program called deepfish from microsoft that addresses the issue exactly, however the jerks won't let the beta out any further. I am gonna aaddress that issue in another post.
I believe the problem is something in the WM6 or the Tilt itself because Opera doesn't work either.
Boy I'm glad you guys worked on this. I upgraded to Tilt yesterday and was cracking my head against the wall trying to figure out why the HTTP addresses wouldn't resolve with the same settings I've been using in my 8525. @#$%#@ Hidden Proxy! lol
Cheers and Happy New Year!
christian15213 said:
what is pie plus. First off, I tried using opera mobile desktop setting and when I went to www.msn.com it still comes up as mobile. Do I have to configure something further?
Lastly, I just told you all that the program for turning off the hidden proxies worked. So for what I was trying to do those programs the other person posted worked nicely. However, it still sucks that I can't bypass the mobile crap... There is a program called deepfish from microsoft that addresses the issue exactly, however the jerks won't let the beta out any further. I am gonna aaddress that issue in another post.
I believe the problem is something in the WM6 or the Tilt itself because Opera doesn't work either.
Click to expand...
Click to collapse
In Opera Mobile go to Menu>Tools>Settings then change Identify as from Handheld device to Desktop computer.
Hi,
I've got a french V1615 by sfr and an "illimythics" data plan.
I try to connect with palringo (http://www.palringo.com/)
but the connection is impossible.
I try to change the registery settings :
HKEY_CURRENT_USER/Software/Parlingo/Settings
"Connection/Proxy/Host" : 195.115.25.129
"Connection/Proxy/Port" : 8080
"Connection/Proxy/Type" : 1
but i still got the " connection loop " problem.
Do i have to change the user agent ?
Opera mini works fine
thanks in advance for you'r help
ben
Hi there,
I think you shouldnt set "type" to 1 (it means HTTPS)
Which I don't think is correct for SFR Proxy
Give it a try with type=0, and let us know how it works.
(comment based on http://forum.palringo.com/archive/index.php/t-64.html)
You may also find these (currently undocumented) registry settings useful:
Connection/Proxy/Host - The hostname for your proxy server
Connection/Proxy/Port - The port for your proxy server
Connection/Proxy/Type - 1 for HTTPS proxy
(all settings have string type)
This will allow Palringo to tunnel it's traffic through an HTTPS/SSL proxy.
--
re. The password: this will be obscured in future versions. Note, however that the settings are stored in HKCU, which by default is not accessible to other users of a shared system
Click to expand...
Click to collapse
thanks
It works now just by switching from 1 to 0.
gtalk is working like a charm
thanks again
sebbes said:
Hi there,
I think you shouldnt set "type" to 1 (it means HTTPS)
Which I don't think is correct for SFR Proxy
Give it a try with type=0, and let us know how it works.
(comment based on http://forum.palringo.com/archive/index.php/t-64.html)
Click to expand...
Click to collapse
I'm sorry to bump this topic again, but i need some help!
I'm using a limited connection as the one you've mentioned, it's an Orange network in Israel.
I use this proxy : 192.118.11.56:8080
Unfortunately this trick and registry change didn't work. I always get the "Reconnect pending" message.
I also tried to change the value of the proxy type to "0" as sebbes suggested, but nothing :S
I think that this WAP proxy is HTTP and not a secured HTTPS one. Can this be the reason for not working?
I'd like to hear suggestions on how to make this work.
Thanks!!!
my version of parlingo doesnt have those registry keys dunno why can u tell me what version do u have or can u post it
mahd-leb said:
my version of parlingo doesnt have those registry keys dunno why can u tell me what version do u have or can u post it
Click to expand...
Click to collapse
You have to add the values manually
I have searched this forum (maybe I have missed something)
Does not matter what ROM I put on the X1, when I set the proxy settings (for my work connection) they do not seem to "stick".
I saw someone mentioning a registry fix, but I cannot seem to see it.
Also if someone could make a cab the sets the keyboard language to value 1035, I would be very glad, I have a swedish keyboard on my X1, but I prefer the WWE roms.
wrong forum dude
-does this happen on official ROMs?
-did you connect the device to activesync or WMDC? normally the proxy settings get copied from the PC to the PPC
- try to use "wifi profiles" app to create several profiles with the correct proxy settings. you can now create a shortcut to activate the wifi and change to the correct profile with a single click
cheers
Thanks for looking
Not sure how this is the wrong place though as is it pertains to only cooked roms on the X1.
I am using Vista WMDC, but I will explore the profiles you where talking abount.
Essentially I am connected via USB, I have forced the PC side to use Work as the connection and I am either creating a new connection or using the work connectino then configuring the settings.
Once I set the proxy address, and I exit, it's wiped clean from that profile.
"wifi profiles" is a software http://www.freewarepocketpc.net/ppc-download-wifi-profiles-v0-0-2.html
also see if you can cange the proxy from Opera (opera:config) . i used to have an addtional opera mobile application just to access the internet from work without changing the profile.
Thanks, I will download it today and check.
My problem is that I want the wather and other internet based tabs in Manila to work and opera proxy would not settle this.
/J
i had a lot of proxy issues with a lot of non official builds found in most cooked roms. so see if you get this problem with an official rom
THE GRIZZ said:
i had a lot of proxy issues with a lot of non official builds found in most cooked roms. so see if you get this problem with an official rom
Click to expand...
Click to collapse
I'll try, it's jus that the Stick X1 (or even the X2 rom) sux. this is why I am putting cooked roms on it in the 1st place
I just read somewhere someone hinting that there may be a simple Registry fix to make the settings stick.
It's funny, I can go in and out of the connections settings (under work, 1st set my proxy 2nd edit my proxy) and it's all there UNTIL i go to the weather tab and try to refresh the status.
Then if I go back it's cleared