Problem with SD Card, Help - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hi,
I just bought the Sandisk 2GB miniSD card, however, when I try to install program from ActiveSync, but the option is disable for the choose destination of the program. I cannot get it to work.....please help. Thanks

Soft Reset
Usually the unwillingness to install on the SD means the device hasn't seen the SD card.
Often, I have to reset to get my MDA to recognize the insertion of an SD card, once I had to reset twice.

Related

Another one bites the dust :-(

Been using a Kingston 1GB SD card for the last 4 months with no problems at all, until yesterday :shock:.
I was downloading the a file from the internet via GPRS directly to the SD card. The browser locked up the PPC so I had to reset it. Now the card is completely dead, whatever device I put it in.
What have I learned from this?
1. The XDA 2i kills SD cards if it is reset whilst writing to the card.
2. Don't use flakey apps to write to the SD card, or download from the internet directly to the SD card!
yup my xda2i killed on of my sd cards as well can't read it on any device
same card same problem ... later some freeze and soft reset my sd kingstone 1gb is missing and also winxp don't format!!
i have seek this utility to format my sd and now all run good!!
http://h18007.www1.hp.com/support/files/hpcpqdt/us/download/20306.html
..you must have a usb card reader to use this utility

Major SD Card problem..

ok ive had my 256mb, 512mb and 1gig sd card working fine on my BA until recently..now im running into the following problems:
1. all the cards are recognised on the BA, but i'm prompted with this "Do you want to format this storage card to make it readable". Following the successful format, neither system nor applications like Resco or SKTools see the Storage Card.
2. I've formatted using both Fat16 and Fat32 on pc but again when inserting the cards into the BA i get the same "Do you want to format this storage card to make it readable". After formatting, the same result as no.1.
3. Ive read that un-checking "Enable advanced network functionality" would help. Have tried this and soft-reset with the same problem.
4. After formatting a card in the BA and then sticking it into the card reader on my desktop...the pc doesnt recognise it and prompts to format it. So this keeps going round and round with both pc and BA prompting to format before use. However the pc recognises the cards after formatting them.
5. After the BA formats any of these cards..I soft reset..but then it prompts to format again after the soft-reset.
6. Tried using StorageTools but it never recognises any of the cards when inserted..even after the BA has recognised it and apparently successfully formatted it.
7. Finally tried a hard-reset and restored my backup but still none of the SD cards are recognised.
Now it seems maybe a system problem or possibly a hardware fault..but the cards do initially get recognised when inserted into the BA but its after the BA formats it that nothing appears.
Have had a search in these forums...tried chkdsk on all cards without errors..but I'm still stuck..hope someone out there can help. Thanks in advance.
definately some hardware problem in BA.
i have a broken WIFI chip.
welcome to the club.
SD Card Problem - QTEK9090
I have the same problem with my 2Gb Storage card. I have updated my QTEK9090 to WM6.0 and after the update my storage has the same problem.
Im trying to find some patch or upgrade to this problem.
Try this
After some times, ived already had such problems like yours, and i think ived already fix it, ahm try to install wm5storage on your device,then activate it,, then connect to the PC, IT will,promt as removable disc,, just format the SDcard, then try to restart it,, im n0t sure if it would work on You BA coz ive done it on My HIMALAYA, but again its worth of trying,,
bukwit said:
ok ive had my 256mb, 512mb and 1gig sd card working fine on my BA until recently..now im running into the following problems:
1. all the cards are recognised on the BA, but i'm prompted with this "Do you want to format this storage card to make it readable". Following the successful format, neither system nor applications like Resco or SKTools see the Storage Card.
2. I've formatted using both Fat16 and Fat32 on pc but again when inserting the cards into the BA i get the same "Do you want to format this storage card to make it readable". After formatting, the same result as no.1.
3. Ive read that un-checking "Enable advanced network functionality" would help. Have tried this and soft-reset with the same problem.
4. After formatting a card in the BA and then sticking it into the card reader on my desktop...the pc doesnt recognise it and prompts to format it. So this keeps going round and round with both pc and BA prompting to format before use. However the pc recognises the cards after formatting them.
5. After the BA formats any of these cards..I soft reset..but then it prompts to format again after the soft-reset.
6. Tried using StorageTools but it never recognises any of the cards when inserted..even after the BA has recognised it and apparently successfully formatted it.
7. Finally tried a hard-reset and restored my backup but still none of the SD cards are recognised.
Now it seems maybe a system problem or possibly a hardware fault..but the cards do initially get recognised when inserted into the BA but its after the BA formats it that nothing appears.
Have had a search in these forums...tried chkdsk on all cards without errors..but I'm still stuck..hope someone out there can help. Thanks in advance.
Click to expand...
Click to collapse
Well, you've already tried different STORAGE CARDS and same thing happens right? You've already tried reformatting it using your PC and also with your BA and same thing happens right? You did a hard reset and samething...definitely a hardware problem. But before this, what happened? Before your BA stops reading your storage cards, what happened?

TYTN2 micros sd card not recognised

Help,
After i flashed my KAISER i have a problem. The sd card is not recognised anymore. Is there a solution for this problem?
I hope so, otherwise i have a brick
Storage card problem
I always used a 4 gig card, just tried an 512 mb card, and that one was recognised. Strange isn't it?
First, which method did you use to flash your new ROM?
If you used the USB method to flash your new ROM, did you remove your SD card during the flash process?
If you used the SD card method to flash your new ROM, did you do a hard reset with your SD card inserted?
Second, do you have an SD card reader for your computer? I would probably try to verify that the file system and data are intact on your SD card. If you have an SD card reader, you can also use it to reformat your card.
If none of this is helpful, provide some more information to fill in the gap between your microSD card working properly and not showing up on your phone.
Re
I flashed to TPCV5.1 full today. No sd in my phone.
My cars reader in the computer doesn't recognise the sd card either.
Strange thing is , when i use an other 4 gig sd card, the phone still doesn't recognise it, my card reader on my computer does, so why not on my phone.
I had a 2 gig sd card, and put all the data again on it, and it's working.
Stilli have a problem that my phone won't recognise a 4 gig sd card.
So far my story.
Does seem odd. What file system is your 4GB card formatted with? If it shows up as "RAW" or anything, I would definately format it to FAT32.
Edit: I was referring to your "other" 4GB card. I don't think I have any advice for the original one.

help me please my hd2 could not detect memory card

hi i installed wp7 then after it i go back to win mo 6.5
but my device can not detect my micro sd card i format it and i change my sd card with new one but my device said no sd card include in tools format sd card said # the storage card has been damaged and unable to be formated #
i do every thing after this problem with my device changing rom install nand android and re install wp7 but non of them can detect memory card i do hard reset , task 29
is it soft wear problem or hard wear problem????
please help me urgent
So you are saying that you previously had WP7..So after changing ROM (windows 6.5 or Android) you need to format your card with Panasonic SD formater so it can read the full capacity of your card....BUT.....! You are saying that you did all this steps and still your device doesn't recognize your sd card and also you changed the card with a new one! HMMMMM......
Most probably a hardware problem (sd card holder and reader in the device)
Imo something went wrong with Installation or so! Dunno!
Some guys here said that WP7 will burn your card or something!
What SD cards did you use?
Anyone else that experienced this problem????
hi
i use 8 gb sandisk micro sd memory when i put memory in my divice in stting sd card & phone storoge show no sd card
when i connect my phone to pc mass storage showe mass storeg but when i click it no data sho and my system tell please inset meomry
when i want format my sd card from my phone th phoe alert the storage card has boon damaged and unable to be formated
is this the hard wear probiem or soft wear problem
please tell me what can i do
if it's hard wear problam can i chang my sd card slot or i should change my phone mother board?????
help me as soon as posibel

Nexus One Thinks All SD Cards Are Blank

I'm having a weird problem with a Nexus One. It had a 2GB microSD card in it that seemed to go corrupt (all the file names went crazy) so I reformatted it and it happened again within minutes. So today I bought a new 8GB microSD card and and the Nexus now gives the error of "Blank SD Card - SD card blank or has unsupported filesystem." It is unable to format the card, but it doesn't give an error. I tried formatting the card to FAT32 on my computer, still the phone thinks it is blank/unsupported.
I'm hoping the SD slot isn't fried... any thoughts?
You could try reformating the SD card in a computer using SDformater with erase on.
I have the same problem for a few weeks now. My phone can't seem to read the sd card at all. Thought it was the sd card so I bought a new one, but problem remains. I know both cards work (have tested them in another phone and the computer reads them). I've tried formatting the card in the phone and reformatting with erase on using SDFormatter in my computer but my phone refuses to read it. Think it might be my sd slot as well...
Currently running CM 7.1.0. Haven't tried a factory reset or flashing another ROM (how would one go about doing that with no sd card?) as I'm not too keen to lose that data if I can help it.
Did you manage to fix it?
I was not able to fix it and after many hours of troubleshooting, so I gave up. Good luck to you, and please reply if you find a solution.

Categories

Resources