Help,
After i flashed my KAISER i have a problem. The sd card is not recognised anymore. Is there a solution for this problem?
I hope so, otherwise i have a brick
Storage card problem
I always used a 4 gig card, just tried an 512 mb card, and that one was recognised. Strange isn't it?
First, which method did you use to flash your new ROM?
If you used the USB method to flash your new ROM, did you remove your SD card during the flash process?
If you used the SD card method to flash your new ROM, did you do a hard reset with your SD card inserted?
Second, do you have an SD card reader for your computer? I would probably try to verify that the file system and data are intact on your SD card. If you have an SD card reader, you can also use it to reformat your card.
If none of this is helpful, provide some more information to fill in the gap between your microSD card working properly and not showing up on your phone.
Re
I flashed to TPCV5.1 full today. No sd in my phone.
My cars reader in the computer doesn't recognise the sd card either.
Strange thing is , when i use an other 4 gig sd card, the phone still doesn't recognise it, my card reader on my computer does, so why not on my phone.
I had a 2 gig sd card, and put all the data again on it, and it's working.
Stilli have a problem that my phone won't recognise a 4 gig sd card.
So far my story.
Does seem odd. What file system is your 4GB card formatted with? If it shows up as "RAW" or anything, I would definately format it to FAT32.
Edit: I was referring to your "other" 4GB card. I don't think I have any advice for the original one.
Related
Been using a Kingston 1GB SD card for the last 4 months with no problems at all, until yesterday :shock:.
I was downloading the a file from the internet via GPRS directly to the SD card. The browser locked up the PPC so I had to reset it. Now the card is completely dead, whatever device I put it in.
What have I learned from this?
1. The XDA 2i kills SD cards if it is reset whilst writing to the card.
2. Don't use flakey apps to write to the SD card, or download from the internet directly to the SD card!
yup my xda2i killed on of my sd cards as well can't read it on any device
same card same problem ... later some freeze and soft reset my sd kingstone 1gb is missing and also winxp don't format!!
i have seek this utility to format my sd and now all run good!!
http://h18007.www1.hp.com/support/files/hpcpqdt/us/download/20306.html
..you must have a usb card reader to use this utility
My SD card (Transcend) goes 'missing' once in a while. and the files seems to get corrupt even when I am copying on my WinXP PC (using an SD card reader).
Searching the web I found this Panasonic SD card formatter which claims to format your SD card to be more 'SD compliant' compared to a windows format. http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
Eager to solve my SD problem, I went a head and download this software and perform a format on my SD card. To my horror, after formating, my SD card is only recognized as 1Gb!! Maybe it's only meant to format certain SD card brands, clearly mine is not the case.
If anyone is having this problem, you can download this software to fix your 2Gb SD Card back http://www.ritekusa.com/jsp/SD_Cards_Download.jsp
It does fix my SD card and give me back 2Gb of space. Hopefully after formating it with Pocket Mechanic will make it more compatible with my Dopod D810 and not make my files go corrupt.
I wanted to ask before I did it. If I transfer all my data that is on my 4gig card to my 8gig card and switched it out would it be fine? I have a lot of back up files and stuff on my 4gig, but doesn't the new card have to be formatted before you can use it? Sorry, I'm real stupid when it comes to external storage.
Thanks,
Alex
It does have to be formatted as a fat32 drive, which you can do in Windows.
I did the same thing though (transferring from one card to another) and it worked fine.
EarthsiegeTA said:
It does have to be formatted as a fat32 drive, which you can do in Windows.
I did the same thing though (transferring from one card to another) and it worked fine.
Click to expand...
Click to collapse
Cool, Thanks.
You're gonna be just fine transferring content from a 4GB to an 8GB SD. Just watch out for potential hidden files that might not get copied in the process. Usually they are either temporary or cache files that will get regenerated when you use the new SD for the first time.
When I put my card in the card reader my computer doesn't find it, then I put it back in my phone and it's fine. What could be the issue? Would a PNY micro sd adapter work with a sandisk micro sd card?
Well, I found out it was my card reader. It wouldn't detect anything over 2gigs. That's odd, but I got it to work at home. Thanks for all the help.
Hi all. I just got a new X1 a few days ago. Pretty happy to have it, however, I'm having chronic problems flashing a rom on it using the micro SD method. I have a PNY Micro SD card, and after hard spl-ling my phone, I put a rom on the micro SD card in the root, renamed it to KOVSIMG.nbh, powered the phone off. Removed the battery and micro SD, reinserted everything, and when I powered it back up, I got the tri-colored screen, then it said no image file. For some reason, this PNY card isn't being recognized by my computer, so I can't reformat it with my computer. Can somebody please either tell me how to format the card on my X1 or direct me to the most current and reliable USB method thread please. Thanks.
[A] Micro SD Flashing method won't work
Hi x1-pc7,
try this:
http://forum.xda-developers.com/showthread.php?t=787867
In Summary,
try to copy all your microsd contents somewhere else temporarily. e.g. your pc desk top
FORMAT you SD card as FAT or FAT32.
try the micro SD method.
sorry, i mis-read your post, you knew all that above...
To format your sd micro card, you would need a card reader to format your sd card.
card reader that handles the microsd, or put the micro sd into a sd card adapter, usually provided with the microsd card, and put this into a sd card reader.
Hope this helps!!
Have a Happy New Year!!
chinkyeyed09 said:
Hi x1-pc7,
try this:
http://forum.xda-developers.com/showthread.php?t=787867
In Summary,
try to copy all your microsd contents somewhere else temporarily. e.g. your pc desk top
FORMAT you SD card as FAT or FAT32.
try the micro SD method.
sorry, i mis-read your post, you knew all that above...
To format your sd micro card, you would need a card reader to format your sd card.
card reader that handles the microsd, or put the micro sd into a sd card adapter, usually provided with the microsd card, and put this into a sd card reader.
Hope this helps!!
Have a Happy New Year!!
Click to expand...
Click to collapse
Listen. I said that my micro SD does not get recognized by my computer. I have an adapter, but my computer won't recognize it. Read the whole post, and please show me where it talks about how to use the USB method to flash because the micro SD method will absolutely not work for me.
Thanks.
Happy New Year to you too.
usb method is simple
just turn device off.push the volume bottom in(& keep it in) then push power & keep both in until bootloader screen appears.then connect to usb.run Xperia Software Upgrade...Done!
x1-pc7 said:
Listen. I said that my micro SD does not get recognized by my computer. I have an adapter, but my computer won't recognize it. Read the whole post, and please show me where it talks about how to use the USB method to flash because the micro SD method will absolutely not work for me.
Click to expand...
Click to collapse
You could try to change your USB to PC setting to "Disk Drive" (Start » Settings » Connections). This way your phone will only show your microSD card instead of both internal memory and SD contents.
See if that enables you to format your SD card.
x1-pc7 said:
For some reason, this PNY card isn't being recognized by my computer, so I can't reformat it with my computer.
Click to expand...
Click to collapse
Not even without the X1, i.e. when using only your adapter?
Sounds like either the card or the adapter is broken - any chance to cross-check with another card/another PC?
Make sure your adapter can handle the card: (µ)SDHC cannot be read by older (µ)SD adapters....
Need some help pls. I formatted my SD card, inserted in the phone, came into boot loader mode, but no onscreen instuctions. Am I suppsed to run the upgrade sofeware becos the error from there is my phone is corrupted.
julyjat said:
Need some help pls. I formatted my SD card, inserted in the phone, came into boot loader mode, but no onscreen instuctions. Am I suppsed to run the upgrade sofeware becos the error from there is my phone is corrupted.
Click to expand...
Click to collapse
Are you trying to flash your phone? If you do, have you copy the new ROM to the SD card? (in root, not in any folder) And rename the ROM to "KOVSimg.nbh"
Then the boot loader mode will detect the ROM and show instructions.
However, if you're not trying to flash your phone, you don't need to enter the boot loader mode. Just do battery pull, and start your phone normally.
not dev related, therefore moved to q&a
Samsung i897- given to me used, Original owner said never used the sd card slot as it never came with one.
I hit flash to stock from the phone menu, it is at O/S version 2.2.
I am trying a sandisk micro sdhc 8 gb.
I put the card in the phone, the external sd was/is greyed out for mount and format.
I tried the disc in my pc and it read as fat, so I reformatted it as fat, and it still does not show in the phone.
I tried putting files on it when connected to the pc, and it worked.
Can anyone tell me what I am doing wrong? Is this a common problem for this phone? Does the card need to be named something special? I looked in the manual and cannot even find what format the card should be (fat,ext4 etc).
Thanks in advance.
Kilbert said:
Samsung i897- given to me used, Original owner said never used the sd card slot as it never came with one.
I hit flash to stock from the phone menu, it is at O/S version 2.2.
I am trying a sandisk micro sdhc 8 gb.
I put the card in the phone, the external sd was/is greyed out for mount and format.
I tried the disc in my pc and it read as fat, so I reformatted it as fat, and it still does not show in the phone.
I tried putting files on it when connected to the pc, and it worked.
Can anyone tell me what I am doing wrong? Is this a common problem for this phone? Does the card need to be named something special? I looked in the manual and cannot even find what format the card should be (fat,ext4 etc).
Thanks in advance.
Click to expand...
Click to collapse
OK so,
Tried Formatting the sd as NTFS? what kernel do you have? what compilation of froyo do you have?
External SD is mounted as vfat.
Can you see the SD card by using a usb adaptor outside of the phone? If not, try another card. If yes, format it there as a fat and try again in phone.
Sent from my SGH-I897