Hi all, in the last days wifi on my ba has become very unstable; it begin to disconnect every few minutes, now it's difficult to activate, i need to soft reset many times...
What can be? The wifi hardware is deading?
I've tried installing the new rom AKU 3.5, but the problem persists..
please help me
Related
Have a weird problem and wanted to see if anyone knows a fix.
I have siemens sx66 running wm2003
When using the phone through out the day the phone part of it stops making and recieving calls, even a reset wont fix the issue, after about 5 mins it will reconnect to the network and start to work fine, this happens about 5 times a day. It is not a reception issue since the phone worked fine in my house for the last year, it just started happening.
I upgraded to Helmi AKU3.2 1.3.2b windows mobile 5 and it seems to be more stable. Now when i lose the connection with the network a softreset will allow it to reconnect back to the network. One time when it disconnected i went into device information and for radio rom it said NONE, could this have something to do with the problem, is the phone deleting the radio rom or not seeing it sometimes?
Update:
To try to fix this issue I first smacked it a couple of times, this did nothing to resolve the problem, I then took the entire phone apart to see if there was anything broken, after noticing nothing I smacked the phone a couple of more times. After putting the phone back together the issue is still there.
doing a soft reset when "Radio: NONE" pops up seems to be the only solution.
btw, have you upgraded to Radio 1.15.00?
Hi all.
I'm facing the same issue.
Since I upgraded to Helmi's AKU3.2-1.3.1 I noticed, that the Radio Stack suddenly is lost. You will get no error message. Switching the BA on you will note that the Radio Icon has an "!". Soft resetting will not work. But strange enough, if putting th BA into craddle (or using an USB cable for syncing/charging) and then soft resetting will work, the radio unit is re-enabled again.
I'm now on AKU 3.2-1.3.2 and the issue still exists.
Unfortunately you cannot reproduce this behaviour. Sometimes it happens, but you can be happy and the BA is working for day's without any trouble.
Beside this: the BT stack performance is the worsest I ever met. Just noise, jitter and a very short range using my Headset (Plantronics M2500)
I will try AKU 2.6 this weekend hoping it will be more stable.
yes upgraded to radio rom 1.15 from 1.13 hoping it would fix the issue. Do you guys think the issue is hardware or software?
dr.x
You may want to downgrade from 1.15. There have been several reports in different posts that 1.15 presents several random problems. I installed it for about 2 weeks, but then my phone started making sounds like screetching metal, which led me to believe that I had a loose wire on the speaker or something like that. Then, I remembered about some people complaining about this Radio, so I decided to downgrade. Have not had that problem again. Moreover, I seemed to have weird reception problems in areas where I normally had good signal as well.
All in all, my bets are towards the Radio rather than the BA itself. So, downgrade your Radio and stop hitting your BA before I have to call "BA Services" for domestic violence :wink:
Hope this helps!
dr.x said:
yes upgraded to radio rom 1.15 from 1.13 hoping it would fix the issue. Do you guys think the issue is hardware or software?
Click to expand...
Click to collapse
Hi.
I upgraded to Radio ROM 1.15.00 long time ago und as it worked fine.
As I mentioned before, i faced the problems with disappearing Radio Unit first after I upgraded to AKU 3.2-1.3.1
So I suppose, it will have to do with this ROM Version (AKU 3.2-x.x.x)
Regards
Chuck
Hi everybody,
maybe it's of interest to anybody:
I have experienced strange problems with my Kaiser (Vario III). It wouldn't turn on after having been turned off, and I had to resort to a soft reset. I was able to trace this to the installation of the vxUtil network programs.
As I don't need the utils at the moment, I didn't install the suite after my last hard reset, so everything is fine now.
Robert
rfka01 said:
Hi everybody,
maybe it's of interest to anybody:
I have experienced strange problems with my Kaiser (Vario III). It wouldn't turn on after having been turned off, and I had to resort to a soft reset. I was able to trace this to the installation of the vxUtil network programs.
As I don't need the utils at the moment, I didn't install the suite after my last hard reset, so everything is fine now.
Robert
Click to expand...
Click to collapse
I have the vxUtil executable on my Storage Card, and after a hard reset there's no need for an install. I can run it directly. I never had problems with this app.
Hmmm ...
I think I'm getting more and different issues here, while the aforementioned problem didn't turn up again, I'm getting SoD's now that might be related to Kaiser Tweak, but it's all so inconsistent.
Robert
Sorry for my English.
Hi, got a very big problem with my Kaiser - Vario3. Bought it from UK by e-bay. There was (maby) original T-mobile ROM. When I`ve done all settings correct and tried to connect, the display backlight have flashed to maximum, but Kaiser was still working, but without data connections. I`ve tried many 6.0 and 6.1 ROMs with many radios and everyone freezes it. Display backlight turns on max and freeze. Hard reset solves nothing, after entering PIN, freezes. But without turning on phone part of Kaiser is all OK. Only one ROM, which is able to make Kaiser useable, is T-mobile ROM ...but no data connection, if I try to start data, display backlight turns on max and Kaiser is freezed.
Anybody able to help?
Hardware dead?
...pls.
roman4u said:
Sorry for my English.
Hi, got a very big problem with my Kaiser - Vario3. Bought it from UK by e-bay. There was (maby) original T-mobile ROM. When I`ve done all settings correct and tried to connect, the display backlight have flashed to maximum, but Kaiser was still working, but without data connections. I`ve tried many 6.0 and 6.1 ROMs with many radios and everyone freezes it. Display backlight turns on max and freeze. Hard reset solves nothing, after entering PIN, freezes. But without turning on phone part of Kaiser is all OK. Only one ROM, which is able to make Kaiser useable, is T-mobile ROM ...but no data connection, if I try to start data, display backlight turns on max and Kaiser is freezed.
Anybody able to help?
Hardware dead?
...pls.
Click to expand...
Click to collapse
What you need to do is read the kaiser WIKI as unfortunatley it isnt as easy as just flashing a ROM you need to install hard SPL, and unlock it first. All of the information to sort the problem can be found in the WIKI
I`m not greenhorn. I`ve got hard SPL etc. I`ve read lot of wikis, forum threads. But nothing helps me to solve my problem. So...?
If this is happening with every ROM you install then I would think that it may be a bad sector on the phone causing this in which case the seller has sold you faulty goods
I think so. I`m waiting for PayPal result, I sent my problem there. But I still hope, that is possible to solve this with software tools too. So if anybody has the same problem, and has solved it, I hear (read) you.
Or developers with any great idea? It seems like any T-mobile branding problem, because phone is useable only with T-mobile ROM, with any other ROM just as PDA without phone.
...?
Im having problems connecting my diamond to my bt home hub 2 with wpa/wpa2-psk security. The problem I have is when I try to connect to my network. I have entered the correct passcode and it tries to connect but never does. Can anyone help me with this? I remember having a similar problem a few weeks ago after I upgraded my rom but I cant remember how I got it working again. This problem has happened since I upgraded my rom to duttys 3.2. I tried connecting my diamond to the network with the security turned off and it worked fine.
Can anyone help me with this?
Thanks
Can anybody help
I had AES password encryption on my network and my diamond always thought it was TKIP. simply chose AES from the dropdown box and reconnected and it was working. hope this helps!
nahh I had already tried that but nothing worked. In the end instead of doing a hard reset I upgraded to duttys 3.3 and since then it has worked. I really dont know what caused it. Thanks anyway
I am unable to turn on the WIFI on my Raphael.. Tried hard and soft reset, even flashing it with latest ROM and radio, without success..
Any software out there that is able to do a diagnostics to ensure that ALL the hardware, ie. wifi card is working properly??
This phone is ONLY less than 1 month old!
Any help is appreciated.
Thanks.
I am having the same problem...
It will not even let me turn it on and the app in setting/connections
is no longer there
ANY HELP WOULD BE GREAT!!!