I do not find it.
I'm missing something?
E!
It's not there. Is it an HTC only thing? I really miss it.
Doesn't it have the Voice Commander, which does the same thing, if not better?
Voice Speed Dial vs Voice Commander
The big difference here is that Voice Speed Dial requires individual training of tags, and it thereafter works. Voice Commander is voice independant like M$ Voice Command, and requires no training. However, it doesn't work, unlike the M$ product. No matter how hard I try, or how I contort my voice, recognition is impossible. I must have tried 100 times, and didn't get a single correct recognition. I got so sick of the asian electronic lady saying "try again!"
There is however a new version (UK based it seems) that may work a bit better. It is available from the Dopod web site if you are registered. I gave up and just used the Microsoft 1.6 which is working well
Camstech said:
The big difference here is that Voice Speed Dial requires individual training of tags, and it thereafter works. Voice Commander is voice independant like M$ Voice Command, and requires no training....
Click to expand...
Click to collapse
Must be the Oz twang...
Actually, you can train Voice Commander, just like VSD.
Go to your Settings, start VC's settings. You may want to limit the less frequently used entries in your contacts by unchecking them, to increase accuracy.
Then, if you want to train VC on the ones you left checked, just hold the stylus onto the entry until you see the contextual menu, then chose Build. Then train away....
I dunno about you, but the voice commander works flawlessly for me, I ever got my father to try it, who has a heavy accent. You must be speaking chinese or something....
yegor said:
I dunno about you, but the voice commander works flawlessly for me, I ever got my father to try it, who has a heavy accent. You must be speaking chinese or something....
Click to expand...
Click to collapse
Well, I speak with a very neutral USA accent and it doesn't work nearly as well as MS Voice Command for me.
Be careful, if you SOFT RESET the device after the FW Upgrade, the Voice Commander is not installed and of course you don't find it.
Make a backup, Hard Reset the device, let the customization install everything and then restore your files. You will have the voice commander of course in English.
Bye!
The original rom was HTC Italian..( sigh )
Con someone extract it from a HTC ROM?
Where can i download Voice Commander?
Thx
Related
I have tried searching, and haven't been having much luck.
With a phone as advanced as this, why is having voice dialing WITH voice-to-text recognition such an issue? My Verizon V710 had true voice dialing with back in 2004!
From what I've been able to garner, true voice dialing is pretty rare with the GSM market, but with a PPC phone, there should be some option.
Before the Tilt, my Blackberry Pearl had voice recognition, but it barely worked. What do I need to install on my Tilt (using the latest Dutty Tilt version TouchFlo ROM) to have this feature? It is beyond me why a phone nowadays would not have this feature....
Get microsoft voice command 1.6. It will let you run your whole by voice. Do a search and you might find a link.
i agree with angel-78. I'll add, if you act like that and dont want to ask questions nicely and dont care about your phone, maybe you should sell it and go find a more simple phone to use. this one sounds out of your league.
angel-78 said:
Get microsoft voice command 1.6. It will let you run your whole by voice. Do a search and you might find a link.
Click to expand...
Click to collapse
Thanks for the reply. I did search, both with the forums search and using the Google "site:" function. No luck.
kireol said:
i agree with angel-78. I'll add, if you act like that and dont want to ask questions nicely and dont care about your phone, maybe you should sell it and go find a more simple phone to use. this one sounds out of your league.
Click to expand...
Click to collapse
I'm not sure what your problem is, but if you don't have anything to add, why don't you go take a long walk on a short pier. What do you want me to say... pretty please, with sugar on top?? If I was mad, it was quite obviously directed at the makers of an otherwise great phone/OS, but apparently your 2nd grade reading skills don't cut it when trying to extract such information from a post.
...and when did I EVER say I didn't like my phone? I think it is just RIDICULOUS not to have some sort of hands-free calling that doesn't require training. Every non-PPC phone I've owned within the past 3-4 years has had it. For a phone in this price range, it is absolutely inexcusable.
I do not need a more simple phone. It's not like it's a feature that is there, but I'm not able to figure out. It's just not there. But you probably wouldn't understand anyways.
There. Now you can say my post was other than nice. Retard.
wow yer an idiot.
kireol said:
wow yer an idiot.
Click to expand...
Click to collapse
Hmmm, "you're" the one who can't spell "you're".... retard.
Thank God for the "ignore list".
Flapjack - I understand with and agree with your point. I don't know if it's a software or hardware issue but it seems that a voice recognition feature shouldn't be that hard to come by. I also have seen this technology at work on other phones, as with you, mostly Verizon Motorola phones. Seems odd that GSM phones wouldn't have the technology. Does anyone know why this limitation exists? To reiterate, I'm not talking about the voice recognition feature where you have to record your voice and use it as a tag. I'm talking about the enter-names-in-your-address-book-and-just-be-able-to-call-it-by-saying-the-name feature. I believe it's called SIND or Speaker Independent Name Dialing.
As with Flapjack, I'm not bagging on the phone. Mostly, I want to know why this technology is not available on phones like the Kaiser but exist on phones that are free with Verizon.
Was anyone able to trigger the Ms VoiceCommand from a Parrot kit ?
I have a Parrot CK3000 Evo, and the Kaiser won't launch the msvc invit
... while it does with a bluetooth heaset
At the opposite, my Blackberry 8820 works great...with the Parrot (else I still don't like Blackberry OS )
any idea?
Want voice dialing
I have also had it on my last 2 phones sony S710A and my old MOT V551. both GSM by the way. I have a hard time believing this phone would not have simple voice dialing. Does any one have a clear answer on this issue
The best voice dialing is Microsoft Voice Command v 1.6. I have used this on my Tytn and now Tytn II (Kaiser). Go to Handago.com and download and purchase this software. The accuracy is 95% and I have over 550 contacts. It also announces incoming calls by name (check the threads for a fix for WM6), can even read sms messages (careful who listens to these) and much more.
Best app on my Kaiser
Voice Command is the best retail package out there.
Voice Signal is much, much better than VC, but it's only OEM'd so you can't get it for the various Kaisers out there.
VoiceSignal doesnt seem to support as much spoken languages...
If MVC is so great, why is it not included as part of Windows Mobile? It doesn't make any sense...
Do any cell companies actually include the software in their ROMs? It would make a lot more sense for them to pay for bulk software and include it as opposed to us having to pay for it.
I mean, really... it's not like the voice recognition software that comes with other phones is free. They pay for it, we use it.
Voice command
I think voice command is not bundled with phones because of the few languages supported.
I'm italian and voice command is quite unusable.
I heard cyberion voice command support italian but I can't find it anywhere.
I agree with the first istance: it's very strange that a €800 windows mobile phone has not a voice recognition program. My old Nokia N70 does have and it works very very well.
It's the carrier/phone manufacturer's option to bundle VC, but MS is going to get their money out of someone for the software. For example, it's included on many Treo's, and I believe the Samsung i760 includes it. But then VZW or Samsung paid for that license and built the cost into the phone.
Well, the TILT does come with Cyberon Voice Speed Dial pre-installed. It works and not only allows voice speed dial, but voice launching of applications. MS Voice Command may be better, I don't know, haven't paid the money to try it.
Wish there was a way to select or adjust that synth/can voice. It's pretty rough.
Flapjack said:
Thanks for the reply. I did search, both with the forums search and using the Google "site:" function. No luck.
I'm not sure what your problem is, but if you don't have anything to add, why don't you go take a long walk on a short pier. What do you want me to say... pretty please, with sugar on top?? If I was mad, it was quite obviously directed at the makers of an otherwise great phone/OS, but apparently your 2nd grade reading skills don't cut it when trying to extract such information from a post.
...and when did I EVER say I didn't like my phone? I think it is just RIDICULOUS not to have some sort of hands-free calling that doesn't require training. Every non-PPC phone I've owned within the past 3-4 years has had it. For a phone in this price range, it is absolutely inexcusable.
I do not need a more simple phone. It's not like it's a feature that is there, but I'm not able to figure out. It's just not there. But you probably wouldn't understand anyways.
There. Now you can say my post was other than nice. Retard.
Click to expand...
Click to collapse
Here's a link to The MSVC cab and the post it was on in the forum: http://www.sendspace.com/file/f48smf
http://forum.xda-developers.com/showthread.php?t=337501&highlight=MSVC_US_PPC
I've attached the VibraSwitch which I used to map VC to my PTT button (button 6, no hold). Have fun.
Thank you so much!
It never even occurred to me to search for "MSVC". No wonder I couldn't find it!
TheOccult said:
Here's a link to The MSVC cab and the post it was on in the forum: http://www.sendspace.com/file/f48smf
http://forum.xda-developers.com/showthread.php?t=337501&highlight=MSVC_US_PPC
I've attached the VibraSwitch which I used to map VC to my PTT button (button 6, no hold). Have fun.
Click to expand...
Click to collapse
awesome piece of software!
thanks alot man!
one question though, is it possible to map anything to the button on the handsfree? that's when i really need to use the voice command, when the phone is in the pocket and i have handsfree out. it would be little annoying having to take it out all the time to press a hard button.
any suggestions?
The HTC voice commander, is there any way to stop it repeating what you said after you've spoken someones name or the application to load?
cheers guys
Could be wrong here, but I think it is prompting you to confirm that it has interpreted your command properly.
When I am making a call, it won't proceed until I have said "yes" after it repeats the contact name.
Andehh said:
The HTC voice commander, is there any way to stop it repeating what you said after you've spoken someones name or the application to load?
cheers guys
Click to expand...
Click to collapse
Start --> Settings --> Voice Command
(and FYI, it's Microsoft Voice Command, not made by HTC)
ok then cheers.
iv had a look under all the command settings and it doesnt say anywhere about turning the repeat off. With my command it beeps, then i say the name, then it calls. It doesnt wait for confirmation etc at all.
Doesn't cyberon have a program named voice commander?
I am fairly certain the original question was referring to Cyberon voice dialer. I don't think you would want to silence it since it is not always that accurate. It will repeat back to you what it "thinks" you said. This gives you the opportunity to cancel if it gets it wrong.
On the flip side, I discovered that if your phone is set to vibrate only, the speaker is turned off and the voice dialer is silenced... So there is at least one way to accomplish what you want.
My mistake, that does sound like Voice Commander. Not a big fan of that program...
Apologies guys, just checked the 'about' of it and it is Cyberon Voice Speed Dial.
Id still be interested in silencing it if anyone has any advice. I know its usefull hearing it back to you, but usually i say the name then lift my head to go about something else, only checking the screen top see if its a name iv had problems (voice) calling before.
That being said, are there any alternatives that are more popular? Iv had a bit of a look around but havnt found any other free programs that beat the standard voice dial.
Nothing free, but MS Voice Command is a good alternative. Cost's $40 or something like that but I am about to pull the trigger on it cuz Cyberon suks and has some kind of conflict with my bluetooth headset...
My vote goes to MS Voice Command also. I'm also rather fond of it repeating back to me what it's about to do, since it sometimes hears me wrong.
For people in the US on AT&T, the latest leaked WM 6.1 build has MS Voice Command integrated in to the ROM. Dutty used it as part of his Apr 09/16 release, so MSVC is already loaded and ready to go.
Is there a way to have the repeated command sent to the earpiece speaker rather than the speakerphone? I like to hold my phone up to my ear and forget sometimes as the speaker blasts away at my eardrum...
Been using it for a few days now and im starting to get used to the voice so guess ill just live with it.
Thanks for the help anyway guys
Which voice command software do you prefer?
Microsoft Voice Command or Cyberon Voice Command or ? or none
Dude I already made a thread about this like 3 or 4 days ago. Probably why no one has responded to your thread
eagle 1 said:
Which voice command software do you prefer?
Microsoft Voice Command or Cyberon Voice Command or ? or none
Click to expand...
Click to collapse
ROM chefs, take note of poll results!
I like MS voice command,
tried cyberon, couldn't get the hang of it.
cragordon said:
Dude I already made a thread about this like 3 or 4 days ago. Probably why no one has responded to your thread
Click to expand...
Click to collapse
Sorry if I offended you by posting another poll, I see your Poll has 17 votes, while this one has over 50.
I was not necessarily looking for posts, but rather votes on which Voice Command ap should be used in cooked Roms.
Just one problem with MS Voice Command - announcing caller when it is unknown or a private number.
i havent used MS voice command yet...but i have been using cyberon and ive mapped it to PTT button and its very simple. Theres no way that somebody cant use cyberon its very simple voice software...u press the button and speak the command or persons name. Very simple software but i want an opinion from someone whos used both and chose to go with MS...whats the differences and i guess whats the perks of using MS voice comand because obviously it cost money an cybern doesnt...so why is it worth money?..somebody gimme an answer
Voice Command
There is nothing cvc does that ms vc cant, what about having to record 100 or more contacts one at a time. naaaaaaaaaaah...
Nail on the Head!
hankster said:
There is nothing cvc does that ms vc cant, what about having to record 100 or more contacts one at a time. naaaaaaaaaaah...
Click to expand...
Click to collapse
MSVC is arguably free now that it has been in an OEM AND it doesn't use tags. I have way more than 100 contacts and I'd go bonkers if I had to voice tag them all. OK, it sometimes requires you are creative with your pronounciation (sp?) but I can live with that . .. .
mightyox said:
Just one problem with MS Voice Command - announcing caller when it is unknown or a private number.
Click to expand...
Click to collapse
??
How is this a problem? Do you desire that it say nothing, or that it guess or make something up? I don't get what you are driving at.
Isn't it rather an impossibility, that has nothing to do with the software's efficacy?
The beta of cyberon works better for me than ms, no tags needed but you can record them to make it work better.
Cyberon Voice Command
simple and easy to use, use your own voice recording instead of mechanic sounding TTS of MSVC...
MS Voice Command, for reasons previously noted.
sometimes I'm driving and remember something I need to do at home
I'd like to get my Kaiser and use some voice command like "create reminder in 2 hours: check bank account" or something like that
is there any software that can do it?
my voice command software is very limited
Lem0nHead said:
sometimes I'm driving and remember something I need to do at home
I'd like to get my Kaiser and use some voice command like "create reminder in 2 hours: check bank account" or something like that
is there any software that can do it?
my voice command software is very limited
Click to expand...
Click to collapse
I remember seeing something like that on the Enterprise, Captain Picard would seemingly talk into thin air , and a disembodied female voice would do whatever he said, I can't remember what rom he was using though
For now you can link your voice recorder to button 6, though you will have to manually check it to remind yourself later.
LOL
Just to confirm, Picard was using voice recorder on his Kaiser. He used it to record all his Captain's logs as well.....
It's the best he could do..... and therefore perhaps the best you will Lemonhead.....
Good luck.
lol
I already expected to have to push some button before starting talking
but my voice command is seems very limited... I can only ask next appointment and things like that, but I can't create a new one
Hi, Folks,
I'm searching for a software to read the incoming SMS like the Blue&Me® by Fiat/Microsoft do.
I've found this app (TellMeText 1.1.0), but it has only one language (US English), and the language file is compiled with the executable app.
Anyone knows a app to do this function and a way to use the Gabriela Voice (Pt-BR) from iGo or something like this?
Thanks in advanced
If you have Microsoft Voice Command (MSVC) on your phone, you can set it to read incomming text messages, voice announce who is calling, and more Just be sure you really want it to do that before you turn it on.. It can be embarassing when someone TXT's you something questionable when you are in line at the bank or something... There is a feature where it will onyl read it when you have a bluetooth headset connection.. that is what I personally do...
I agree with Teej. I used the free/busy toggle cab to work around this. If I am not at work or somewhere I wouldn't want certain messages read aloud, I leave it free. If at work, I set it to busy. MSVC worked very well for me.
yes, MSVC is good, but reads the msg soooooo fast that you can berly understand what is happening. and the MSVC voice is sooo ennoying.anyway to fix it?
bteljuice said:
yes, MSVC is good, but reads the msg soooooo fast that you can berly understand what is happening. and the MSVC voice is sooo ennoying.anyway to fix it?
Click to expand...
Click to collapse
I haven't used it in a while since I am flashing roms constantly, but I know there is a registry hack where you can slow it down. Just Google it or search here. You can also edit voice recognition so that it is easier for it to pick up what you are say. Its a nice program, just very picky about installation and stuff so people don't like to always deal with it.
i just searched it, didnt find anything. prob didnt type the right info in search.
Is it any trouble if you can guide me ot the right path( regarding slowing the voice and voice recognition)
Appreciate it tilt4life2
this in an idea I like the sound of. Have you looked at the complete MSVC guide on this forum? It may hold a referance to the slowing down of the voices. Im guessing searching MSVC guide should find it or it may be linked in the Kaiser Wiki. Good Luck!
There is also TellMeText by Blondiesoft here and it's totally freeware:
http://www.blondiesoft.com/software/mobile/TellMeText/
It even announces the message before your notification goes off with its regular message tone.
MACkjam said:
There is also TellMeText by Blondiesoft here and it's totally freeware:
http://www.blondiesoft.com/software/mobile/TellMeText/
It even announces the message before your notification goes off with its regular message tone.
Click to expand...
Click to collapse
it does not work on tytn II with WM6.1?
dont know why!
Doppler2008 said:
it does not work on tytn II with WM6.1?
dont know why!
Click to expand...
Click to collapse
Perhaps it has something to do with the threaded sms? I'm not sure. All I know is that it works fine on my TyTN II with WM6.0. In any event, I have decided to go with voice command instead.
tilt4life2 said:
I know there is a registry hack where you can slow it down.
Click to expand...
Click to collapse
Yes! the Kaiser Tweaks cab has the voice command settings in it. It's generically set to 4. Higher settings speeds the chick up, and lower settings slows her down.
Hope this helps.
You can search for Kaiser Tweaks in here to get the cab.
Cheers!
bteljuice said:
yes, MSVC is good, but reads the msg soooooo fast that you can berly understand what is happening. and the MSVC voice is sooo ennoying.anyway to fix it?
Click to expand...
Click to collapse
To change the voice's speed:
Go to "HKEY_CURRENT_USER\Software\Microsoft\Speech\Voices"
Change the value of "DefaultTTSRate" from between 1 (slowest) and 10 (fastest). Default is 4. Experiment to discover what is right for you.