Related
HELP MY QTEK 9090 is totally struck when I eas upgrading I've tryed so many times BUT NOTHINGS HAPPENS!!! I'VE ALWAYS RED ERROR MESSAGE ADN ICAN'T GO BACK!!
CAN ANYBODY HELP ME PLEASE!!
THANKS
:twisted: :evil: :?: :?:
i have any problem like your, what error message you have? win ce image error or anyhink like this?? can you get to bootloader?
Topic moved to BA Upgrading etc.
Did you read this page
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
no i can't!!!
no I can't the pda is completly dead ti gives me the writings
SERIAL
V2.07
AND NOTHING ELSE!!!
I follow the FAQ suggestions but nothings HAPPENS!!!
HELPME PLEASE!!!!
:evil: :evil: :evil:
1)Take it out off the cradle.
2)Take the battery off, and leave it off for about 20 minuts.
3)Make sure that the USB cable is connected directly to your PC, and not through a HUB.
4)Reboot PC, dont start any programs.
5)Put the battery back on you BA, switch it on and Cradle it
6)Follow instructions in WIKI
it work only in eglish version
Thaks Bosjo but works the english version rom only!!
I've discovered , anso I thank you so much, that exist one italian version only for my qtek 9090 the other one once I've tried it
doesen' t work AGAIN!!, I : was been found the same problem...
I'will follow your suggestions...
:evil: :evil: :?:
thanks
Alexj
[please follow bosjo suggestion if u have an english versio, but I need the italian one it's a big probelm for me to install it...damn...!! :twisted:
bosjo said:
3)Make sure that the USB cable is connected directly to your PC, and through a HUB.
Click to expand...
Click to collapse
****, i made a Typo, it should say
3) Make sure that the USB cable is connected directly to your PC, and NOT through a HUB.
It should work with all the roms. (those on the 1.40 link page)
ti's all ok over there
Yeah my fried my cradle is direcly connected to my usb port...
thanks :twisted: :evil:
BAD ROM UPDATE!!
AND NOW : ERROR 102 THE ROM IMAGE FILE IS CORRUPT !!!
I'M REALLY BEACAME NERVOUS..
Any suggestion bosjo??
Please I'm struck again.. :evil: :evil: :evil:
always stuck
Hi my friend after having succes to upgrade my 9090 in english, no way that italian programs, works I've tried to install italian cab files..but. nothings happens.
then I restarted from zero and that'it..
AND NOW : ERROR 102 THE ROM IMAGE FILE IS CORRUPT !!!
and now what should I do please?? The separated files in(verion in WWE) seems not to work !!!!
I'M REALLY BEACAMING NERVOUS..
:evil: :evil: :evil:
Re: ti's all ok over there
alexj10 said:
Yeah my fried my cradle is direcly connected to my usb port...
thanks :twisted: :evil:
Click to expand...
Click to collapse
Well I am lost now.
You say that you can flash a wwe rom, if so which one.
You say you cant flash the ITA 1.40 rom but you dont tell us how you are trying to flash it.
Best is always to start form the begining.
Get your shipped rom back on the device.
Upgrade the radio .....only
empty out the ext rom....
then falsh the CE...only
and if you need help tell us what you did as it would explain how you got the error message. We have no idea what you are doing thus cant help you much.
The program I've first tried named BA_DT_ITA_14004_153_1120.ship
doesent' work !! So Ive my 9090 completly dead, I've red almost all the instructions but now I really dont'know how to move myself, and I'dont remeber the previuos version because is cancelled.the attemp to update to 1.40; 1.40.153; 1.12.00 always fails
I've tryed many times to run the program above, but the error messge is the same : soft reset and restart....
so really do not be able to
Get your shipped rom back on the device.
empty out the ext rom....
then falsh the CE...only
can u hepl me please ??
Ok lets get a wwe 1.40 on your device. (as I am not sure if the ita is Broken)
Follow :
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
1) Take the IMate rom.
2) Download the rom and the MA file.
On device
1) On your device perform a Hard reset
2) Remove the battery
3) Wait 5 mins
4) Put battery in again
on PC
1) Reboot your PC after download
2) Make sure the cradel is connected to your PC with no hub.
3) Turn on device
4) Place it in cradel
Run the upgrade
chose the:
First Method (Quick/Easy) (TYPE II)
Post what happens
country error
thanks for the attempt but the message is country error ...
:evil:
country erroro
[
I've done but..
thanks but the message is :country error....
with the old method applicated at your concept the message is ROM error....and now what's up :?:
What exe are you runing : Name of that file!
file name
the file name is rom 1.13.00
but in th e italian vrsiona the name is ns and anothe rone is nk
Sorry but I'm not so expert mybe isould try the secon method downloading separate file s..??
thanks again.. :?:
There is no file name 1.13.00.exe !
After i tried to install a new rom it stuck on 99% when i put my phone on it will only go to the bootloader... what can i do???
kevinalmere said:
After i tried to install a new rom it stuck on 99% when i put my phone on it will only go to the bootloader... what can i do???
Click to expand...
Click to collapse
Always post the data of your your phone,to get help.
secondly you had a bad flash,perhaps your phone is CID locked. Which rom were you trying to flash ?
Now to recover,download the official carrier's rom and flash it while in bootloaders.The phone will start working again in default status,then,Read and understand the unlocking method and the flashing guide,read the stickies carefully and perform the method correctly.
cheers !
i have a t-mobile vario:
ipl 1.06
sp 1.06
i removed the simlock with lockwizb and a tried to put airfawizard rom on it so now i have this tricolord screen en there is nothing i can do.. tried to update i with the original carrier rom but it says update error so in seems it can't see my phone or something but my usb is plugged in i hope i can fix this i only can see this blue green red screen it drives me crazy hope you can help me.....
Help!!!
I have same Problem with TNE-V1.0n_4mb.exe
IPL 3.08
SPL 3.08
kevinalmere said:
i have a t-mobile vario:
ipl 1.06
sp 1.06
i removed the simlock with lockwizb and a tried to put airfawizard rom on it so now i have this tricolord screen en there is nothing i can do.. tried to update i with the original carrier rom but it says update error so in seems it can't see my phone or something but my usb is plugged in i hope i can fix this i only can see this blue green red screen it drives me crazy hope you can help me.....
Click to expand...
Click to collapse
If you can go to boot loader, most likely you will be ok. When you plug in the usb port, does the words in the screen change from serial to USB? Once it changes, then flash your official, and then CID unlock your device (this is different from SIM unlock). Then flash to the ROM you want!!
PS: Go read wiki about how to unlock and flash and understand more about your device. http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
The only thing it does is going to bootloader and when i plug my usb in it say usb but when i try to install my original rom from t-mobile ( a update ) it says it's looking for information on my mda but after a couple of second it's say UPDATE ERROR i use windows vista can that be a problem? and how do i know wich one is the original..?
kevinalmere said:
The only thing it does is going to bootloader and when i plug my usb in it say usb but when i try to install my original rom from t-mobile ( a update ) it says it's looking for information on my mda but after a couple of second it's say UPDATE ERROR i use windows vista can that be a problem? and how do i know wich one is the original..?
Click to expand...
Click to collapse
Vista dont like upgrading and stuff...but there is a work around, search the forum and see if you find it. Or try using XP.
okee problem solved working again
thanks for your help!!!
kevinalmere...
How did you resolve the issue I'm having very simular problems and believe it's my Vista OS causing the problem..
Orange SPV M600 G4
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 4.0.0.0
Sorry should explain my issue incase anyone can help.
I attempted an upgrade to WM6 using an Upgrade .Bat from this site. I was slightly impatiant due to not being able to complete the downgrade first anyway the upgrade frose, after a while I canceled the update and carried out a hard re-set... Since then I'm not able to boot nor connect to my desktop via Active sync (WMDC (Vista))
I've followed every instruction I can find but only to be meet with RUU Errors saying can't connect or file open. I can however acces my Bootloader screen and when connection is made the USB symbol shows on the screen of my phone...
Any help would be greatly recieved......
have a charmer. I tried to put wm6. but spl and ipl was 1.12. the phone start up and hang when installing some cabs. i restart ir and it allways crashes at t-mobile logo. i updated the rom to aku 3.3. all ok. but continues chashing on t-mobile logo. i try a hard reset. gives me a fat error. I try to put the rom from prophet to try to format it. but that rom upgrade reach 95% and stop. give me a error. this nbf file cannot be used to upgrade this device. I tryed all types of roms. most of them crashes at some point and give me that error. the rom aku 3.3 german and wwe, install perfect. I think that is the only roms I can send to my charmer. but i can´t format whith that rom, fat error. I have 3.08 spl ipl 1.12 because i sent an old charmer rom. ipl downgrade, but spl don´t. do you think my device can be protected?? I dont know that to do more, to bring the charmer back to life. will sd card method work? please help me.
Charmer dead after wm6 update whitout cid unlocking
Hi @all
i have the same problem.
iam stuped and make an wm6 update from ipl1.12 and i have forgot to cid unlock my charmer.
after the update to wm6 all looks like good. the bootscreen from wm6 i have see.
after the reset the charmer hangs at slashscreen.
now i make a update to aku 3.3 ger.
that works but hangs in the t-mobile spaschscreen.
i have tray all downgrading methodes i have read here but nothing works.
jet i have a ipl 1.12. and spl 3.08.
I think only a sd-card rom update works. but i dont have found an sd-card rom to use.
sorry to my bad english.
please can anybody help me?
cu AxelD
Is my phone already dead? Please help me!
Hi, I have a similar may be the same problem!
My phone is a German t-mobile mda compact 2
First I work with “lokiwiz v.02” to unlock the SIM, and it works really well.
Then I installed “Charmer_Touch_ver._2.1” and I could calibrate the screen, and after that Win Mobile 6 installed all the extra stuff automatically. After that the device made a reboot, but it stop at the t-mobile boot screen.
Because the bootload modus is still running, I installed the newest original t-mobile software “RUU_compactII_AKU3.3_38222_382117_026921R_TMO_DE_GER_Ship” but this also didn’t solve the problem.
Hard reset didn't work and always says "Format is
The Start screen shows me this information:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.22
Is my phone really dead or could someone tell me a trick to reactivate it?
I think noone have a solution for us. I tried to send commands to phone whith mtty. and I can´t send. I don´t know why. so f we cannot send commands the sd card method will not work too. the only olution is to jtag the charmer. but can´t find any pinout information. if anyone knows this informtion, please help.
hey, im new to all this, the tutorials dont make sense to me, atm i know my device is:
-tmobile mda vario
-unlocked
-G4
and is rom verion 3.8.2.1 wwe
i tried to upgrade it with SNN Diamond edition, but when ever i tried this, i got to the part where it starts to flash, the mda vario screen goes to the screen with the three colors but then on my laptop it just crashes and seys something about it is not responding and you have to close it, i have tried with other roms, but same thing occurs
can someone plz help meee
use softspl
ok thanks, will it work with unlocked pdas?
need help agen lool
i tried updating the rom with TNT,19213 professional
and error [300] invalid update tool occured
it says this update utility cannot be used on your pda phone.please get newer update utiltiy plz plz help
You have to use SoftSPL, you can get it HERE
In this folder, you copy the "nk.nbf" of your favourite WM6 (and only this file), then start with "START-sSPL.exe" (make sure you're connected via ActiveSync).
When you read this here before, you know everything you need!
Probably you are not following the instructions and doing it correctly,try to go according to the guide,if it still doesn't work,it sometimes happens that SoftSPL fails,than you better do it through 'HardSPL'
sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!