Sync Via Bluetooth (WM6) - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hey guys, has anyone had issues syncing via bluetooth? When I try to setup a new bluetooth partnership to my computer, the only services that it says is available is serial port and hands free. I think I remember activesync being an option. Anyone know how I can fix this?

Do you guys ever work on something for a while, finally give up and ask someone for help? And when you are asking for help, you think of a resolution right after you ask the question? Whelp, that was the case with this one. Basically, it was something in my desktop bluetooth software that allowed you to choose what services are allowed via the bluetooth device. Somehow, Activesync was not checked.
Can someone delete this little thread ?

edit you solved the problem my post is useless

Related

POCKET PRINTER PROBLEM

I have a Sipix Pocket Printer A6. Since upgrading to WM2003, I seem to be unable to use it with my XDA via IR. Does anyone have a similar experience and/or solution? Could it be that I need new updated drivers, and if so is there a place I can download them?
As usual, your useful comments are highly appreciated.
i have the same printer, and it works fine!
at first i had the same problem too, not sure how it got fixed...
but make sure IR auto-receive is off.
if that dont work, try pocketprintce.
email me if still cant fix it.

blue tooth activesync and cingular 8125

Need help. Trying to set up blue tooth on cingular 8125. Just bought new kensington bt and it set up serial com as com 4 and 5. The phone only gives u the option of com 6 and com 7. Any ideas? The BT does connect to phone but activesync cant find phone. Tried activsync 4.1 and 4.2. Thanks in advance for help.
I'm having the same trouble. i scoured this and other forums but can't find any info on this problem. I think we may need to upgrade the rom on our phones. I'm still running the stock rom and i think if we upgrade that might correct the problem.
I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.
bob_beringer said:
I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.
Click to expand...
Click to collapse
This is the simpliest method to fix the problem.
I had many bad rounds of this and finally did a reinstall of the bluetooth and then Active"stink" (crappy program for many reasons).
You have to make sure that you can identify the port that you 8125 establishes a bluetooth session with beforee you try to sync with. This port number is used in Activesync to know which port to talk through.
Please make sure that in the connections of Activesync that you choose the port for which you identified as bluetooth connected to your device.
THEN try to re-establish a bluetooth Activesync connection from your 8125 (pair it if you need to) and "bing" there should the option for Activesync.
ktwildchild said:
bob_beringer said:
I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.
Click to expand...
Click to collapse
This is the simpliest method to fix the problem.
I had many bad rounds of this and finally did a reinstall of the bluetooth and then Active"stink" (crappy program for many reasons).
You have to make sure that you can identify the port that you 8125 establishes a bluetooth session with beforee you try to sync with. This port number is used in Activesync to know which port to talk through.
Please make sure that in the connections of Activesync that you choose the port for which you identified as bluetooth connected to your device.
THEN try to re-establish a bluetooth Activesync connection from your 8125 (pair it if you need to) and "bing" there should the option for Activesync.
Click to expand...
Click to collapse
If you guys still have problems with this after let me know. I played with this for a few hours about a month ago and could retrace my steps. A couple of phone reboots after setting up the ports helped
Just to add, I noticed that once I upgraded the ROM to Summiter's 2.25 I was able to walk out of BT range and when I returned re-sync via ActiveSync without doing a soft-reset of the phone.
As SK7575 said, be sure to post there are plenty of folks using this connectivty option and it does work....
And I had this working - nicely syncing between my cingular 8125 and laptop via BT!!
But then I tried to get my 8125 to connect to my new wireless network - which did not work - and in the process of trying everything I must have broken something, because now after trying everything imaginable I just never see that activesync service on my 8125 any more.
The last I tried was to remove all the BT serial ports from device manager after deleting them from the HP bluetooth neighborhood (I have a bigger HP laptop with built in BT).
Then rebootet and four new BT ports were found and installed. Then I told the HP software to make a new incoming port (they call it service) and got COM 5. Then I told activesync on the PC to use COM5 for syncing.
Made sure all pairing was removed. booted both the HTC and PC - paired the two - bang - no 'activesync' service.
Now I am running out of options especially as I don't know how to un- and reinstall the HP software that comes with the laptop.
Any ideas?
Thanks
Gunter
I also have the HP BT stack on my laptop and ActiveStink does not sync with my MDA.
Any answers here, may help get me synced via BT.
Is the trick to see which USB port comes alive when I connect MDA via USB?
and use that on my PC for ActiveSync to listen to via BT on my laptop?
Thanks
--
NB
I'd be glad to hear if someone has the Belkin F8T012 USB dongle and that they have that working with bluetooth ActiveStink.
'Cause everything I've tried, I never ever see the "Activesync" profile appear on my device when pairing, I only see an available Serial Port.
Does anyone know the details of how that active sync profile is cretaed on the 'puter? If I could troubleshoot from that angle, I bet I'd have it working...
-Chuck

How to make my phone realise that my comp has Active Sync?

How to make my phone realise that my comp has Active Sync? Everytime my bluetooth detects my system it shows only Serial Port? Why so? :?
Re: How to...
kull said:
How to make my phone realise that my comp has Active Sync? Everytime my bluetooth detects my system it shows only Serial Port? Why so? :?
Click to expand...
Click to collapse
if im not mistaken you need some sort of OBEX transfer on the phone... I THINK.. maybe someone can back me up or break me down on this!
It was working...
The problem is it was working alright only after I got something sent over to me by another phone via Bluetooth I have lost Synch partnership! Now everytime I try synching with my system it only show Serial Port as services available and not Active Synch as earlier!
That is the worst title you can think of. You may have got your answer earlier if not for the stupid title.
Go to activesync, on the connection setting, add your bluetooth serial port to it.
Thanks...
Thanks for your comments. The problem is I have already done what you have said, but my phone recognises my system as "Serial Port" or "Active Synch" not both together....
Re: Thanks...
kull said:
Thanks for your comments. The problem is I have already done what you have said, but my phone recognises my system as "Serial Port" or "Active Synch" not both together....
Click to expand...
Click to collapse
So, what is your problem? Just choose the "Active Sync" when your phone recognise your PC as "Active Sync". Please state your problem clearly.
hmmm, i think you've been hit by a virus phone,you dnt have a choice, only HARD RESET :evil:
Re: Thanks...
hanmin said:
kull said:
Thanks for your comments. The problem is I have already done what you have said, but my phone recognises my system as "Serial Port" or "Active Synch" not both together....
Click to expand...
Click to collapse
So, what is your problem? Just choose the "Active Sync" when your phone recognise your PC as "Active Sync". Please state your problem clearly.
Click to expand...
Click to collapse
When I pair my phone with the system the services it shows on the phone is only "Serial Port" and not "Active Synch". So when I try synching via Bluetooth from the Active Synch on the phone I get a message "Please pair a phone with Active Synch". I am not being able to make my phone "realise" that there is Active Synch on my system!
Re: Thanks...
kull said:
When I pair my phone with the system the services it shows on the phone is only "Serial Port" and not "Active Synch". So when I try synching via Bluetooth from the Active Synch on the phone I get a message "Please pair a phone with Active Synch". I am not being able to make my phone "realise" that there is Active Synch on my system!
Click to expand...
Click to collapse
Hmm.. there seems to be communication problems between you and me too No worries. Anyway, just to confirm, that you have done this already.
Go to Active Sync.
Click on 'File'->'Connection Settings'
Check (tick) 'Allow connection to one of the following'
At the list below, choose the COM port that your bluetooth is attached to.
Delete the bluetooth pair (on your phone)
Re-pair (match) your bluetooh again (on your phone).
If fail, try another COM port at the 'Allow connection to one of the following'
Have done that
I have done what you have told me. The problem is my phone doesn't even recognise that my system has Active Synch via Bluetooth. All it show is Serial Port! It was working fine until I tried the dial-up funtion to connect to internet via GPRS. Since then when I pair it shows my phone as a modem. I have tried unpairing pairing several time no luck :?
Kull, I had a similar problem where my phone would not recognize the ActiveSync connection and would show it as serial port. Turns out that the port was unchecked in ActiveSync's connection settings. Hope this helps.
i had a similar problem...i deleted everything on bluetooth devices and ports on desktop pc and started from scratch...also soft reset the device...it worked for me...
Tried all but...
I have tried several things, including hard resetting the phone, installing Active Sync, repairing, problem just refuses to go!
You did create a port in bluetooth right. Control Panel, Bluetooth see pix...
Then select this port in ActiveSync.
Done that...
Yeah this is all fine, I think the problem is on the phone, somehow some port or something is blocking something.... if only I knew....
i´ve the some problem, and i remember that deleting a file on ppc, the problem was solved, but i don´t remember what file
miguelromerom said:
i´ve the some problem, and i remember that deleting a file on ppc, the problem was solved, but i don´t remember what file
Click to expand...
Click to collapse
Thanks, hope u remember it some day, cause the problem is still there.
Found a possible "solution" for some people who have been having problems estabishing a BT AS Partnership with their Universal and a host computer running AS. What I found was you may need to edit the registry to fix the problem. Here's what happened to me yesterday:
Morning: Hard reseted my device and installed all my software apps at my work computer via AS in USB mode as a Guest. Note: I have not set up a partnership with any computer (either USB or BT).
Evening: Got in my truck and paired my JasJar to my BT GPS receiver via a BT Serial Port. Used TomTom and navigated home.
Late Evening: Got home. I wanted to set up a BT AS Partnership first so I went through the procedures of pairing my device and my home computer. And guess what, it didn't work. My JasJar would not see that AS was an available option on my home computer (NOTE: Before Hard Resetting my device in the morning, I had previously established a BT AS Partnership with my JasJar so I know my machine supported that profile). What the @?#~! Ok. I did a search of the word "sync" through the registery. Came up with an interesting issue. Under the registry entry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
In that directory I saw a folder listed as: 000a3a051d0f (This folder is specific to my device (more below)). I was wondering what this was since I did not have any BT ActiveSync Profiles set up yet. When I looked in it, I realized immediately that this is the Device Profile for my GPS RECEIVER!!!! What the hell was it doing in this directory I asked myself. So I deleted the folder 000a3a051d0f from the directory:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
And guess what? I was able to establish a partnership via BT immediately!!!
Wow miguel, this seems to be the answer. Finally after sooo long I get a possible solution. Now even I see a mysterious folder in the exact place u have mentioned. This problem occurred after I transferred a file to a Nokia phone. So this must be the issue. Can check only after I return from my hols though. Thanks again.

Bluetooth Sync- Please help

Hi all:
After hours of searching and trying, and failing, I have given in, and decided to go ahead and ask. Please be gentle, I know how much everyone hates when people ask already answered questions, but I have honestly spent hours trying to solve this problem.
I am unable to get bluetooth sync to work (Windows XP).
I kept getting too high a COM port number, and was not able to select it on ppc.
After many searches both here and Google, I was finally able to get a COM port which was low enough for my Tilt to recognize (COM port 9). I Added new device to Tilt, and FINALLY I had ActiveSync as an option.
It indicated I should select COM port 9 to sync. I have also gone into my bluetooth place on PC, and verified that it shows COM 9 as My Serial Port. I have also checked, and my PC does show up on ppc bluetooth devices. I have double checked that ppc is discoverable. I also added 9 under COM ports on phone.
However, ActiveSync on PC does not list COM port 9 as an option.
Also, when I try to add Tilt to My bluetooth places (on PC), it tells me no available COM ports on ppc.
If I go to Activesync on phone, and click connect via bluetooth, it says opening port, then connecting to host, and a pop-up on pc states that ppc is connected to blueooth serial port on PC (COM 9). After this, all activity stops, and active sync does not ever connect.
Please help me
Thanks!
You don't need to set a COM port on the PPC itself. Delete it as well as the pairing with your PC.
On the PC, check the Serial Port service is enabled in the BT settings. I'd then make sure the COM port number is between 1-8. Now where this is done depends on the BT software stack you have on the PC, it can be in the BT settings, or you might have to go in the device manager, COM ports, find the Bluetooth COM port and change its number here in the advanced properties.
Open Activesync connection settings, check the COM port tick and select the port in the dropdown. If you can't see the port here and select it it won't work, so theres no chance your current setup will work.
Then on the phone add new device, select the PC, type same passwords on both sides to create the pairing. In the next service window you should have Activesync, tick it, finish. This should now work, at least I've always done that way for years now with different PCs and PPCs. Activesync is crap though, and on some configurations I needed to kill the activesync process and relaunch it everytime before connecting or it wouldn't work, or open the connection settings, remove the COM port tick and dismiss, then open again and put it back.
Also, when you connect on the PPC, some PC bluetooth stacks will ask you everytime if you want to allow the connection, but the prompt doesn't appear unless you go manually click in the BT tray icon. That was on my last PC.
There are often small issues but I always got it to work somehow
Hi:
Thanks so much for your reply.
I deleted the COM port on phone, as you instructed.I also deleted pairing.
I wasn't able to set COM port to a lower number than 9. There was no advanced properties for the COM ports in device manager. I even enabled show hidden devices, and show non present devices. Still nothing. I have no idea what is trying up the lower numbered COM ports.
Somewhere along the line, ActiveSync started showing COM port 9 as an option. After selecting it, it now works perfectly.
I am however mad, and frustrated as I don't know which of the MANY steps I took fixed it. I wish I did, so I could post it here, and hopefully help someone else who is about to pull their hair out trying to get their Kaiser to sync via bluetooth. Not to mention if I ever have to set it up again for myself, I have no clue what got it working
Thanks again for your help!!
In the future:
Turn on bluetooth on phone/PC
Right click 'My Computer'/Manage/Device Manager
Check what COM Port your Bluetooth on PC is using
Start Active Sync/File/Connections/Allow Connections from the following (select COM here)
Hit OK then Sync.
Hi Nufsaid:
Thanks for the steps, but believe me, I had tried that dozens of times. My problem wasn't with setting up pairing or anything like that. All the COM ports assigned to bluetooth were way too high for ppc to recognize. Eventually after much effort I got the serial COM port down to COM port 9 (which the phone now was able to use, before it had been 16, 17, 18). Active Sync refused to recognize that COM port. Anyway (as I mentioned in my previous post), after hours of trying, COM port 9 magically showed up as an option in Active Sync. Sadly I am not sure which of the many steps I took fixed the issue.
Thanks anyway.
cincy1020 said:
Sadly I am not sure which of the many steps I took fixed the issue.
Thanks anyway.
Click to expand...
Click to collapse
Don't worry, the first time I tried to sync a PPC via BT I had the exact same kind of problem and never found out how I got it to work. But since then the steps above have worked well
kilrah said:
Don't worry, the first time I tried to sync a PPC via BT I had the exact same kind of problem and never found out how I got it to work. But since then the steps above have worked well
Click to expand...
Click to collapse
LOL
That is funny, but great to hear!
Thanks!
Okay, this is really becoming RIDICULOUS!
I had it syncing perfectly last night. All I did, was go to bed. Turned off bluetooth on phone, and turned off PC.
Today when I went to sync again, COM port 9 is no longer listed in ActiveSync.
And of course, it will not sync. I have tried everything to get COM post 9 to show up again, and it will not. My bluetooth serial post is still listed as COM port 9, and when I establish a connection, it connects, It just won't connect to ActiveSync. I tried deleting the pairing, and re-pairing, but now ActiveSync is not longer listed as an option on phone after pairing.
Any ideas, or suggestions would REALLY be appreciated. And believe me, I have searched, and searched, and then searched some more, I just can't fix this.
Thanks!
Install another Bluetooth stack (one that works ) on your PC? Widcomm for example
kilrah said:
Install another Bluetooth stack (one that works ) on your PC? Widcomm for example
Click to expand...
Click to collapse
Hi:
Thanks for your reply.
I actually am already using Widcomm. Is it possible Widcomm is not working well with my PC? Should I try another? Any suggestions.
Again, thanks for your help. While I am not new to PCs or PPCs, I am VERY new to bluetooth and all that jazz, lol.
Thanks
EDIT:
Actually, I should have said I have the Widcomm stack installed. I am not however sure how to verify that it is being used.
i once read that it works with BlueSoliel, not Widcomm. Try that. BlueSoliel worked for me, but not Widcomm.
I'm using Widcomm (actually the one that is bundled with my Logitech MX5000 desktop bluetooth keyboard/mouse) and it works perfectly fine. On my laptop I have a Toshiba stack and it works well too. Maybe you have an old version that is bogus? I have had trouble to get the widcomm stack to work at the beginning, Windows default crappy stack would always take the BT hardware over preventing the Widcomm stack from using it.
AthenaLod said:
i once read that it works with BlueSoliel, not Widcomm. Try that. BlueSoliel worked for me, but not Widcomm.
Click to expand...
Click to collapse
Just got a new mini dongle I'm trying to use BlueSoliel, but am having trouble, I can push to my phone, listen to music via stereo bluetooth, but can't serial. BlueSoliel gives an option in tools/configuration/quick connect to assign com ports, but the ones shown won't show on my phone as an outgoing/incoming port...have you figured this out? All I want to do is Activesync via Bluetooth.
You don't need any port to appear on the phone for sync. What matters is the COM port number on the PC. You need to know it, set activesync to use it, then do a pairing preferably from the phone, and select on the phone to use the PC's "ActiveSync" service that should appear in the list if the PC configuration is OK.
Basically there's nothing to configure on the phone. If something's wrong it's 95% chance that it's on the PC.

Contacts Via Bluetooth?

is there a way to send bulk contacts from your phone to another bluetooth unit/phone? I managed to do it one at a time but i need to do it as a mass if its possible
If you find out...
please let me know too!
anyone have any answers to this?

Categories

Resources