How to do a HARD RESET on Helmi's 3.5 ROM? - MDA III, XDA III, PDA2k, 9090 Software Upgrading

please help me how to do a HARD reset on this ROM version.... i don't know i have installed an application (new D3D driver or something like that and media player and telephone is f.... up) it's something bad with graphic... i have tried uninstall everithing which was possible... but nothing didn't help
when i tried HARD RESET it is ignoring me please help me what to do...

I presume that you read the Wiki??
gangstaunitg said:
please help me how to do a HARD reset on this ROM version.... i don't know i have installed an application (new D3D driver or something like that and media player and telephone is f.... up) it's something bad with graphic... i have tried uninstall everithing which was possible... but nothing didn't help
when i tried HARD RESET it is ignoring me please help me what to do...
Click to expand...
Click to collapse
because you would have to be either really thick, really blind or just plain stoopid to have missed a page called
BlueAngel WM5 For Beginners
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
It does clearly state that you should read the damn Wiki, or do a search!
(Both of those buttons are at the top of this screen in a brown bar with lovely writing, they are hyperlinks, and will transport you upon clicking once with your left mouse key!)

Related

Picsel Browser 1.0.5

Anyone know where we can get this browser?
Is it free or commercial?
I hear about it, but cannot find it!
Thanks
Find the information in here
http://www.picsel.com/index.php/solutions/view/C11/
I tried and it is amazing, like i use i-phone. I can move the page with my finger by shifting up and down or lef and right. Good browser, it can handle many thing it can be use in himalaya
I tried to get trail version but no sucess.
Even to buy it is not mention any whare.
I contacted them, waiting 4 reply.!!
PM me if u want the Working version of this Browser..i also have Deepfish (from Microsoft)...
Do picsel browser and/or deepfish work on al websites or should the website builder install server side software or thumbnails created in advance for it to work?
Be carefull may be there is incompatibility with WM6. I found my device became messy My touchscreen like a mirror. My "start" picture is still in the up left corner but when I want to open it, I have to touch at the up right corner. And It is also happened with the other position
I have to do hard reset to overcome this problem
I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!
Hi all,
I am looking for a working Version for my himalaya.
Can somebody help me
xwilli
Rare bol - HERE
Rare bol said:
I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!
Click to expand...
Click to collapse
I had the same issue so I unistalled it, soft reset and re-installed it and wala it starts again!
Rare bol - HERE
Rare bol said:
I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!
Click to expand...
Click to collapse
I had the same issue so I unistalled it, went into windows files under program files and deleted the picsel folder, soft reset and re-installed it and wala it starts again!
Hello!
What language is your device?
I had the same problem with a german device. The reason were some entries in th registry that where linked to some where in "program files" instead of "programme" as the folder is called in a german device. Corrected it manualy and everything is fine now.
JueLue

Need Help with Calculator

Hi
I just got my Diamond, as ussual comes with the rubbish WM Calculator, so I thought I'd update it to the HTC skin which I also did on my Orbit 2, Only problem it doesn't work on the VGA, so I uninstalled but now my original calculator doesn't work any more?
What can I do?
Cheers
Richard
hard reset is my thought.....or you can try searching for the original calculator cab.....i'm sure it's on the forum...
Just pulled the batt out while on, assuming thats a hard restart. Still the same.
This is the error:
The file 'calc' cannot be opened. Either it is not signed with a trusted certificate , or one of its components cannot be found etc...
Couldn't see an original CAB for VGA device?
well read in the book to find out how to do a hard reset on the diamond.(i don't have one so i doon't know i'm just trying to be as helpfull as possible since this thread will probably almost be ignored) a hard reset is like a format of your phone to bring everything back to the defaults.....or you can use the search function of the forum to look for the original HTC Diamond calculator cab file......
I happen to be at work, I don't have the manual to hand, why would this be ignored anyway I thought this was the place to find friendly help! I always thought a hard reset was just pulling the battery while switched on but that does not restore default settings. Anyway I have just managed to fix it, I found a cab file called Microsoft calculator.cab and it has restored it.
Thanks anyway but no need to get funny about it!
was not trying to be funny....was just saying that this developer site sometimes ignores little threads like this....a missing calculator is not a big concern to devs....anyways i'm glad you got it working...i knew theire had to be a cab file for the calc somewhere on here.
Still, can the default WM6 calculator be skinned? Looks horrid compared to the rest of the interface
i'm wondering the same thing.. this calculator needs a new look
btw, hard reset is volume down + enter key + reset
richardirv said:
Anyway I have just managed to fix it, I found a cab file called Microsoft calculator.cab and it has restored it.
Click to expand...
Click to collapse
Hi richardirv
I have exactly the same problem and would prefer not to do a hard reset unless absolutely necessary.
Is there any chance you could tell me where you found the Microsoft calculator.cab ?
Thanks in advance
My Calculator is Gone as well!!
If you (richardirv) could please post were you found that ms calculator cab it would be appreciated by many!!
I have been searching for a while to a fix for this. I too tried installing the HTC skin and did not work. When I uninstalled it the calc.exe file was gone leaving me with no calculator.
I have many custom settings and programs and would hate to do a hard reset for a calculator.
Thanks a bunch in advance!!
HTC Touch Pro
WM 6.1
nevermind richardirv
found it!!: http://forum.xda-developers.com/showthread.php?t=399943&highlight=Microsoft+calculator.cab
thanks to TheOne_ for posting it!!

iFonz on Diamond?

Hello,
can somebody tell me here, whether also on the Diamond I the program iFonz, what here is described, can use? I already tried it, it only partially works, also after shut up the touchflo surface.
can´t unistall!!? please help!!
Hello,
I have a HTC Touch Diamond (win 6.1, sweden rom 1.37) and i´ve tried the Ifonz 1.0, - doesn´t work too great on vga!! The problem is that i can´t uninstall it!? I have tried to use remove programs and soft reset but it say that it can´t remove Ifonz...? i´ve removed everything in windows/autostart directory too and tried to remove it, but nothing work.. plz help!
have search the forum without success
really nice forum by the way
/noob in sweden
tried using it
you hav to resize the icons to make it work for the diamond vga screen
but the top bar still remains too small for me
caljitu said:
tried using it
you hav to resize the icons to make it work for the diamond vga screen
but the top bar still remains too small for me
Click to expand...
Click to collapse
I´ve tried it too, but it´s not smooth, kind of laggy.. But my problem is that i can´t uninstall it!? why? is there some other way to uninstall not using the uninstall program in windows?
you can try sktools or just do a hard reset

touchflo not showing

hi
i just got this phone unlocked thru ebay, popped in my sim and its working fine. the issue im having is that its at the ugly big green default wm 6.1 screen and not touch flo.
i basically want the default touchflo theme running and have been looking through the settings tab and selecting the htc black.tsk and selecting "beam" but nothing happens.
any help would be appreciated and apologies for my retarded noob question.
this phone is really cool and im glad i picked one up as aformer pantech duo owner.
anyone?
i guess i dont have the default touchflo theme.
anyone know where i can find it? the link in the thread for basic utlities is down and doesnt work.
thanks
hard reset
Since you have the phone for only a day, i suggest a hard reset. Unless you installed & tweaked all night long, not much will be lost...
yeah ive done a hard reset but nothing changes. its basically at the default wm 6.1 screen and not the touchflo interface. ive downloaded tf3d config but nothings going on...
??
i guess what im missing is the "touchflo3d" option in the today settings tab.
anyone know where i can find it?
embryosys said:
i guess what im missing is the "touchflo3d" option in the today settings tab.
anyone know where i can find it?
Click to expand...
Click to collapse
have u enabled the touchflo by ticking the box next to it in today items, the tab after the theme
if not install this cab
http://rapidshare.com/files/173056510/Diamond_manila_by_Swtos.cab
do i install on device or internal storage?
embryosys said:
do i install on device or internal storage?
Click to expand...
Click to collapse
you have to install on the device it wont let you install to the internal storage
If he has done a hard reset and nothing changes, I think that means there is a non-original ROM on it...?
Sandeman1976 said:
If he has done a hard reset and nothing changes, I think that means there is a non-original ROM on it...?
Click to expand...
Click to collapse
it could be he has a fake diamond

WM 6.5 | Part of taskbar missing, HELP!

Hi,
Since a while part of my taskbar is missing. Well, most of the time it is: when I close a program is is totally visible for a very shot while. (See screenshots)
I've allready installed other taskbarthemes using sdkcert, but no improvement..
Anybody got a solution??
Gr,
EdjuH82
I have seen several discussions about making the OK/Close button larger so that you can use your finger rather than the stylus. There may be some ROMS that include this feature and perhaps yours is one of them that is malfunctioning.
I would hard reset if you like your ROM. If not, flash a new one and the problem will go away.
Doug M.
i wouldn't go so far to hard reset anything right away- i would install an sdkcerts and then soft reset and then install a taskbar skin cab found on these forums and see if that fixes things
GustavTheLion's,
I allready installed an other taskbarskin, this didn't help..
The problem accured after I installed a game, which wouldn't work (so I removed it right away. Today I turned the function off that says that puts the time in your taskbar when you run a program and now the problem only accures on the 'home-screen'.
Dwmackay,
An hard reset is an option, but it's the very last one. Maybe there are other sollutions?
Thnx for your replys!
Well guys, I hard-resetted the device and the problem is solved.
But I'm still curious what the problem was, so if anyone can explain it to me.. be my guest

Categories

Resources