Related
Anyone know where we can get this browser?
Is it free or commercial?
I hear about it, but cannot find it!
Thanks
Find the information in here
http://www.picsel.com/index.php/solutions/view/C11/
I tried and it is amazing, like i use i-phone. I can move the page with my finger by shifting up and down or lef and right. Good browser, it can handle many thing it can be use in himalaya
I tried to get trail version but no sucess.
Even to buy it is not mention any whare.
I contacted them, waiting 4 reply.!!
PM me if u want the Working version of this Browser..i also have Deepfish (from Microsoft)...
Do picsel browser and/or deepfish work on al websites or should the website builder install server side software or thumbnails created in advance for it to work?
Be carefull may be there is incompatibility with WM6. I found my device became messy My touchscreen like a mirror. My "start" picture is still in the up left corner but when I want to open it, I have to touch at the up right corner. And It is also happened with the other position
I have to do hard reset to overcome this problem
I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!
Hi all,
I am looking for a working Version for my himalaya.
Can somebody help me
xwilli
Rare bol - HERE
Rare bol said:
I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!
Click to expand...
Click to collapse
I had the same issue so I unistalled it, soft reset and re-installed it and wala it starts again!
Rare bol - HERE
Rare bol said:
I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!
Click to expand...
Click to collapse
I had the same issue so I unistalled it, went into windows files under program files and deleted the picsel folder, soft reset and re-installed it and wala it starts again!
Hello!
What language is your device?
I had the same problem with a german device. The reason were some entries in th registry that where linked to some where in "program files" instead of "programme" as the folder is called in a german device. Corrected it manualy and everything is fine now.
JueLue
Hi
I just got my Diamond, as ussual comes with the rubbish WM Calculator, so I thought I'd update it to the HTC skin which I also did on my Orbit 2, Only problem it doesn't work on the VGA, so I uninstalled but now my original calculator doesn't work any more?
What can I do?
Cheers
Richard
hard reset is my thought.....or you can try searching for the original calculator cab.....i'm sure it's on the forum...
Just pulled the batt out while on, assuming thats a hard restart. Still the same.
This is the error:
The file 'calc' cannot be opened. Either it is not signed with a trusted certificate , or one of its components cannot be found etc...
Couldn't see an original CAB for VGA device?
well read in the book to find out how to do a hard reset on the diamond.(i don't have one so i doon't know i'm just trying to be as helpfull as possible since this thread will probably almost be ignored) a hard reset is like a format of your phone to bring everything back to the defaults.....or you can use the search function of the forum to look for the original HTC Diamond calculator cab file......
I happen to be at work, I don't have the manual to hand, why would this be ignored anyway I thought this was the place to find friendly help! I always thought a hard reset was just pulling the battery while switched on but that does not restore default settings. Anyway I have just managed to fix it, I found a cab file called Microsoft calculator.cab and it has restored it.
Thanks anyway but no need to get funny about it!
was not trying to be funny....was just saying that this developer site sometimes ignores little threads like this....a missing calculator is not a big concern to devs....anyways i'm glad you got it working...i knew theire had to be a cab file for the calc somewhere on here.
Still, can the default WM6 calculator be skinned? Looks horrid compared to the rest of the interface
i'm wondering the same thing.. this calculator needs a new look
btw, hard reset is volume down + enter key + reset
richardirv said:
Anyway I have just managed to fix it, I found a cab file called Microsoft calculator.cab and it has restored it.
Click to expand...
Click to collapse
Hi richardirv
I have exactly the same problem and would prefer not to do a hard reset unless absolutely necessary.
Is there any chance you could tell me where you found the Microsoft calculator.cab ?
Thanks in advance
My Calculator is Gone as well!!
If you (richardirv) could please post were you found that ms calculator cab it would be appreciated by many!!
I have been searching for a while to a fix for this. I too tried installing the HTC skin and did not work. When I uninstalled it the calc.exe file was gone leaving me with no calculator.
I have many custom settings and programs and would hate to do a hard reset for a calculator.
Thanks a bunch in advance!!
HTC Touch Pro
WM 6.1
nevermind richardirv
found it!!: http://forum.xda-developers.com/showthread.php?t=399943&highlight=Microsoft+calculator.cab
thanks to TheOne_ for posting it!!
Hi everyone,
In order to install SPB Mobile Shell 2, to test, I wanted to prevent TF3D from launching at each startup. I know there is a way ot desactivate it but will it remove the program from the memory ?
Does anyone has an idea ? I took a look on google but did not see anything.
Thanks for your help.
Start>Settings>Today>Elements>untick TF3D......it´s just another today plugin. BTW TF3D runs fine with MS2.1 on my Diamond.
Nevertheless I have TF3D now disabled - to much of a memory hog. Back to PocketBreeze, BatteryStatus and SPB PhoneSuite together with MS2.1.
djspank said:
Hi everyone,
In order to install SPB Mobile Shell 2, to test, I wanted to prevent TF3D from launching at each startup. I know there is a way ot desactivate it but will it remove the program from the memory ?
Does anyone has an idea ? I took a look on google but did not see anything.
Thanks for your help.
Click to expand...
Click to collapse
Do this to completely avoid TF3D
1. Hard Reset your Diamond (backup before of course)
2. After setting Time Zone and PIN, you see the "3 second" warning for installing HTC apps. Hit the RED soft reset button before the end of the 3 seconds to reboot. After reboot, you now have a clean WM6.1 without TF3D.
X. To bring back TF3D, just do another Hard Reset and let the TF3D install.
I do this myself and have clean WM6.1 with SPB Mobile Shell 2.1
Now I don't have the Blue-Tooth problem (due to TF3D Music Player)
And seems more memory to use than with TF3D
webmice said:
Do this to completely avoid TF3D
1. Hard Reset your Diamond (backup before of course)
2. After setting Time Zone and PIN, you see the "3 second" warning for installing HTC apps. Hit the RED soft reset button before the end of the 3 seconds to reboot. After reboot, you now have a clean WM6.1 without TF3D.
X. To bring back TF3D, just do another Hard Reset and let the TF3D install.
I do this myself and have clean WM6.1 with SPB Mobile Shell 2.1
Now I don't have the Blue-Tooth problem (due to TF3D Music Player)
And seems more memory to use than with TF3D
Click to expand...
Click to collapse
Oki, It seems a little bit hardcore but why not, I will try this.
Thanks for your help
Hi, i just got my diamond yesterday it hanged because i am a newbie and tried several things i do not understand and it suddenly hanged.
I tried the reset it by the small red button, and everthing seems to work fine. Howerever i am now not able to see the Big Digital Clock on the Home page. Pls.. advise on what to do.
I am thinking of doing a hard reset, but i do not know how... What are the risks on doing this and how to do it correctly.
Thank you...
What do you see instead? Nothing? Small clock? Bit more info would be useful....
Hi there
Does anyone else use SPB Pocket Plus (latest version V4.0.2 - Dec 07) and WM6.1 and suffer the annoying problem where the today plugin icons don't pickup correctly after a reset?
It's easily fixed by clicking to refresh all tabs, but surely it shouldn't do it???
I'm also suffering a problem whereby not all text messages are received by my phone. (I posted in the General section with no joy - am hoping that you software guys may know if something conflicts?!) It's very strange as the phone lights up as if a text is coming through, then nothing happens. I've tried a Hard Reset and restore to no avail.
Wierd thing is, my mate has a Kaiser on Vodafone UK (V1615) running WM6.0 and he has the same problem - I'm on O2-UK so it's not a carrier problem.
I set his Kaiser up for him with much the same software as mine, including SPB PocketPlus V4.0.2...
I also (I know, I'm sorry!) have a problem with the today screen if I change things... For example, if I change the backdrop via Pictures and Video's, more often than not the phone will hang requiring a stylus reset. Am wondering if this is SPB PocketPlus related???
Any idea's? (Sorry about the multi questions!!)
Cheers
sorry about the double post!
p.dixon0 said:
Hi there
Does anyone else use SPB Pocket Plus (latest version V4.0.2 - Dec 07) and WM6.1 and suffer the annoying problem where the today plugin icons don't pickup correctly after a reset?
It's easily fixed by clicking to refresh all tabs, but surely it shouldn't do it???
I'm also suffering a problem whereby not all text messages are received by my phone. (I posted in the General section with no joy - am hoping that you software guys may know if something conflicts?!) It's very strange as the phone lights up as if a text is coming through, then nothing happens. I've tried a Hard Reset and restore to no avail.
Wierd thing is, my mate has a Kaiser on Vodafone UK (V1615) running WM6.0 and he has the same problem - I'm on O2-UK so it's not a carrier problem.
I set his Kaiser up for him with much the same software as mine, including SPB PocketPlus V4.0.2...
I also (I know, I'm sorry!) have a problem with the today screen if I change things... For example, if I change the backdrop via Pictures and Video's, more often than not the phone will hang requiring a stylus reset. Am wondering if this is SPB PocketPlus related???
Any idea's? (Sorry about the multi questions!!)
Cheers
Click to expand...
Click to collapse
As far as the PocketPlus, I am using it and I haven't had a problem at all with the icons or anything else for that matter. I haven't had any problems with the txt msgs either. You may need to reset the mms server?? I don't know about that, I just remember reading about it in another thread somewhere... As for the backdrop change, that's not a pocket plus related conflict. I am not sure what else you have installed, but I have changed mine multiple times in the past 2 days and haven't had a single problem or anything that told me I had reset or that I needed to soft reset the phone. I would suggest unistalling the Pocket Plus and reinstalling it. I know that I have had to do that before because of one of the other SPB proggies i used had changed some values in the registry for it. Otherwise, I would contact SPB, they would know how to fix it. Unless you didn't purchase it...
Hi Killerbeans!
I'v tried uninstalling and re-installing a couple of times to no avail unfortunately
The only other things I have installed (all bought and paid for!) that startup with the phone are SKTools (set to performance optimisation) and Kasperski AntiVirus...
I might try uninstalling those and SPB and reinstalling them one by one...
Cheers for the response though!
I have been havng the spb problems since 6.1 installation as well (I am with AT&T in the US, original Kaiser).
Thanks for pointing out the "Refresh All Tabs" option...I have to stupidly admit that I was not aware of it and I have been fixing the icons one at at a time....very boring...However, I have no solution to offer to the problem, other than to verify that it is a real one.
Hmm running fine on my kaiser with the hyperdragon roms...
Are you using the "close button" plugin? if so, did you enter tmail.exe and poutlook.exe as exceptions? don;t doing this could lead to problems
for the icons, I have the same problems too sometimes, did you install it on main memory? are the missing icons from programs installed on storagecard?
there is an option under today plugins->advanced, "refresh icons in today plug-in when storage card is inserted." try enabling that and see if it helps
Bartus
Hi guys!
Thanks for the responses! It's 'good' to know it's not just me having the SPB problem, although not good that it's happening at all!
I've installed it on Storage Card (as I have since my Wizard days). Using SKTools I've set the SDDeamon to startup 1st so was hoping that'd sort it... it didn't
I'm glad the refresh all tabs helped!
I've added those exceptions Bartus so I'll report back! I have the refresh icons when storage card inserted already which doesn't seem to work. It is the apps located on the storage card that don't load though so it has do be something to do with that.
Go back to 4.0.1 it doesn't have the problem.
Hi Sirooga
I'll give that a try, if I still have it on my HDD!
Cheers!
p.dixon0 said:
Hi Sirooga
I'll give that a try, if I still have it on my HDD!
Cheers!
Click to expand...
Click to collapse
did it work
Today Plugin Problems
I also use pocket plus on my Tilt, and it is apparently version 4.0.2 build 6227. What really annoys me is that the today plugin worked perfectly on wm 6.0, but after that &[email protected]#! 6.1 upgrade, it works fine for a few hours after I installed a lot of programs and soft resetted a bunch, until I backed up my phone. After using sprite Backup 5 ONCE, it deletes all my tabs and icons in the plugin and doesn't remember them no matter what I do. It still is checked in the today plugins menu, but it isn't there as there is nothing for it to show. SPB's got some serious work to do.
Dave
p.dixon0 said:
Hi guys!
Thanks for the responses! It's 'good' to know it's not just me having the SPB problem, although not good that it's happening at all!
I've installed it on Storage Card (as I have since my Wizard days). Using SKTools I've set the SDDeamon to startup 1st so was hoping that'd sort it... it didn't
I'm glad the refresh all tabs helped!
I've added those exceptions Bartus so I'll report back! I have the refresh icons when storage card inserted already which doesn't seem to work. It is the apps located on the storage card that don't load though so it has do be something to do with that.
Click to expand...
Click to collapse
Today plug-ins shoud be installed to Main Memory.
Spb 4.01 works far better than 4.02 IMO.
*Second post is a quick tutorial of all the steps I did*
For the past year+ I lots of problems with my tilt. Terrible keyboard response problems, like the keyboard only working 25% of the time. The touch screen being unresponsive or slow 50% of the time. I've hated my phone. Thought it was just a piece of junk. I soft reset so much I thought the reset button was going to fail.
I tried nearly every new ROM that came out, each time after being dissapointed because my problems remained, then I'd move on to the disable xt9 cab, tilt keyboard fix cab, keyboard speed up cab (which I'm still not sure if works, since I now have my initial keyboard delay set at 0 and I don't know if I see a difference), etc. Tried the touch sensitivity registry edit, installed the (I think) x1 touch sensitivity cab. But nothing seemed to change a thing.
I had realized that most of my issues were software related because sometimes things would work fine (for a couple minutes). I've tried the press the hell out of the keyboard buttons fix that was supposed to regain contact between the key, and the sensor for the keyboard, and pretty much everything out there.
Then I recently installed the HTC ROM for the Tilt, and voila, I have a new phone, works nearly flawlessly.
Since then, I have installed Manila 2d (start with update 20, install everything included, then install the latest version) youtube/opera/google maps/audio manager/pictures etc. all work perfectly, installed the Manila2D v20 N2A patch which fixed the weather tab to show my home town, M2DC and applied a new skin, Total Commander (to move the edited weathercities file), Wstask (awesome), ATT Navigator, Windows Live (great for syncing contacts), and it works perfectly. It's fast. I can use my phone now without the struggle, and am happier than I've been in a long time.
I haven't heard anyone suggesting this so I thought I'd let everyone know. This is the phone I always wanted from my Tilt. I have to assume that the minor hardware differences between versions creates a problem with non-native ROM's, and if you are having problems I recommend trying a factory ROM made for your device, you may be pleasantly surprised.
Dustin
*edit* As I'm sure most know, there are hardware issues with the keyboard for many, this will obviously not fix those issues. However, I was able to fix the massive software issues I've had which also effected the keyboard. I still have a testy Y key, but it's not a huge issue when compared to what it was like before. My phone works great.
Correct Forum?
Flashed to the HTC ROM for the AT&T Tilt, download here:
http://www.htc.com/us/SupportDownload.aspxp_id=67&cat=2&dl_id=94
Soft reset immediately after screen alignment, and setup to avoid bloatware.
Adjusted settings for MediaNet:
http://forum.xda-developers.com/showthread.php?p=1632060#post1632060
Installed the following cab files (here's the files, install order, what to do, how to do it, etc. is up to you, try to search for yourselves, I'll try to answer questions posed, included iFonz, and a couple other cabs for the heck of it if you guys wanna play with em):
http://http://rapidshare.com/files/239391014/Cab_Files.rar
Read the following post for info on installing m2d:
http://forum.xda-developers.com/showthread.php?t=425851
To install telenav go to the following address from your phone:
ota.telenav.com/att/tnn
If you do it right, I think you'll be happy campers, enjoy!
Dustin
I've been having the same issues with my tilt as well. EXTREMELY annoying. I love the tilt, but hate that it constantly lags.
Do you have a link to the ROM from HTC?
The last ROM from HTC for the tilt gave me problems
Yes please post the link as i am also having this problem.
Thanks
Link inside!
Here y'all go. It's important to note that this is ROM build 1.62.502.0 and will change your radio to 1.27.14.09. Further info can be found HERE
HTC AT&T Tilt ROM
Different link to the Rom
Here is the link for the page HTC posted the Tilt ROM download if you would like to read first before downloading:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
Hope this helps you guys. For me it was night and day. Let me know if this helps you guys.
Also, I wonder if there are any ROM cooks out there who are interested in cooking ROM's based on the Tilt ROM. That would be sweeet!!!
Dustin
*edit* I'm not sure about the ROM tmnt.mikey posted, but the link I've posted does not change the radio to that version, I flashed and have radio version 1.65.21.18. I'm not sure what radio I was using pre-flash (oops).
does this work with kaiser as well?
because at&t does not have the front camera...
so if i flash to this rom, will it render my front camera unusable?
not that it's really that important, i'd rather have my keyboard functioning well again.
other than that, is there any complication if i run this on my kaiser?
because in the HTC page, it's said... only for at&t tilt...
Kaiser ROM
I have no way to know if this ROM will work for the Kaiser, someone would have to try it out and let us know. I can't imagine it would brick the phone, but the keyboard layout is different, and the front camera thing. However, you might look for the latest Kaiser ROM from HTC then apply all the cabs you want and see if that works for you. I installed the ATT ROM, then did a soft reset before the apps were loaded to save space and clutter, then installed just the cabs I prefer.
It's been almost a week now, and it is still working perfectly. I've installed almost 20 different cabs, it is running faster, and more stable than it ever has. I love my phone now. The difference is stunning. I haven't had any issues thus far, and I've never experienced that before. I hit a button and it works, I touch the screen it works. I'm going off about it so much because I want everyone to know this phone is not a lost cause. I'm still a little in shock how well it works. I had written it off, and thought between HTC, and Microsoft that this phone was just going to remain a glitchy pain in the rear. My phone was so difficult to use that I almost stopped texting all together. I was practically marking off each day on the calendar waiting for the remaining year of my contract to run out.
Dustin
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
berramm2001 said:
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
Click to expand...
Click to collapse
i actually followed the link from dustintm...
but the download was not for my area (i'm in singapore)
and you can't download it anyways...
you need to key in your serial number...
and it has to match the region...
so if that really fixed the keyboard problem...
congrats to those guys in the same region as dustintm...
as for why it happened, i also don't know...
i read in some other thread that it's unlikely if it's dust or the rubber...
i also think it has to do with the ROM, since some days my 'a' keys works fine...
Asian TyTN II ROM
Hey Jonathan,
Here is the link to the HTC Asia download page for the TyTN II:
http://www.htc.com/au/supportdownloadlist.aspx?p_id=13&act=sd&cat=all
Just so everyone knows, this ROM change I am talking about does not fix hardware related issues. I still have a testy "y" key, it works most of the time, but I do have to press it harder at times.
Prior to my find, I was having massive keyboard problems, sluggishness, having to press each key multiple times, etc. I was also having similar problems with the touch screen too.
This will not fix a hardware issue (obviously?). But I've found the new factory ROM has made my phone operate almost without flaw... for the first time. Responsive, stable and consistent. I can deal with the "y", I couldn't deal the snetacnes loking lik tihs (sentances looking like this (all the time)), and all the other problems/lock ups, etc.
Dustin
Keyboard problems sound like a hardware issue. You should try to find a local cellphone store that does repairs.
There is one in L.A. that can fix this for under $50.
Keyboard Problems
I found that I was experiencing hardware (keyboard), AND software related issues (keyboard, touch screen, sluggishness, and lock-ups). After installing this ROM all software issues have disappeared. I am very certain of this. One example is that occasionally the keyboard would work almost flawlessly (with the exception of the y key) and other times it was a complete struggle, multiple keypresses to register once, delay, etc. That made it clear to me that I was having software related issues.
I imagine it could have been ROM issues, or software related conflicts, but either way, I have solved my problems. I flashed to the latest HTC ATT Tilt ROM, and the following programs/cabs:
HTC Enchasements
HTC Audio Manager 2.0
herg62123 FSP, DShow, WMP Yo...
HTC Album 2.0
Google Maps
XDA-SPC-Noonski HTC YouTube
herg62123 2DManila_1_20_19131...
Customization Customize_Tool
snctln M2DC
C. Ghisler & Co. Total Commander
Debarron Manila2D v20N2A Patch
Windows Live 10.6.0034.0800 (Fixed)
waku WkTASK
AT&T Navigator
XDA-Team Opal Volume Control
Systweak Inc Reg Cleaner
SJ SamsungOmnia_Driver_D3D
Massimo Colored Top Bar
ELF Calculator Skin
The EquinoXe Wizard ReTOUCHed...
JUVS HTC Enlarge Start Menu
HTC WMP Touch Skin
Moble Software Design, LLC FreeCaddie
J.S. Advanced Configuration Tool 3.2
Microsoft .NET CF 3.5
XDA-Team NEW M2D
Dustin
BTW Trjons thanks for your post.
be a hero post all your cabs or links
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
davewaave said:
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
Click to expand...
Click to collapse
Also, did you get rid of the AT&T bloatware on yours as well? On a quest for the perfect ROM myself, so I will keep watching the thread for more info.
Would like to see those links as well.
If you want to leave out the ATT bloat ware, after you go through the screen align, do a reset. It will fail to run the script for the **** add ons and then you have basically a virgin rom.
Cab files
Hey lazy people ! Here's a link to all my cabs:
http://rapidshare.com/files/239391014/Cab_Files.rar
I'm somewhat lazy too, so you're going to have to download all of them then pick through to get the ones you want. Enjoy!
Dustin
Thanks
Your're a hero! Thanks for the cabs
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WHOA! Virus detected "win32/virut" after extracting file then accessing folder with "glossy black bars.exe"
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hopefully I've removed the infected file.
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Thanks so much, Dustin!!! I think I will be loading the AT&T 6.1 ROM again, following your fixes, and praying that my 2-PC ActiveSync problem somehow gets resolved along the way, too. (We need a "crossing fingers" smilie! HA!)
I'm just not looking forward to setting my Tilt up all over again. Must wait until I'm in the mood.
Dustintm said:
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Click to expand...
Click to collapse