Has anyone gotten any of the vpn clients to work with WM6, ie bluefire, or athna...
I have used Bluefire in the past, however Activesync will not let me install it since the upgrade, saying that my device isn't supported. (most likely because its no longer showing WM5)
Any help would be appreciated.
Zack84a said:
...saying that my device isn't supported. ...
Click to expand...
Click to collapse
Modify Bluefire.cab with WinCe CAB Manager removing device checking.
Install directly on TyTN (Hermes) from SD. With WM6 for Hermes LVSW Edition (2007-03-15) and Cisco VPN 3000 work fine ! .
Bluefire 2.7 works on WM6
Hello,
i had this Problem first. Then i changed to V2.7 now it works.
At the moment the WLAN seem to be unstable if bluefire is installed.
Has anyone suggestions ?
Thomas
OpenVPN
I use openvpn Ok, under WM5 it would work on wifi and edge but would not on GPRS (t-mobile UK) since flashing to WM6 now is Ok on GPRS. Only helpful if you have a OpenVPN server as an option, sorry.
Related
Take a look here:
https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_vario.htm
BB Connect for MDA VArio direct download:
https://after-sales-service.t-mobile.de/eg_online/t-mobile/t-mobile_sw/mdavario_sw_bb_03-2006.zip
ActiveSync for BB:
https://after-sales-service.t-mobil...mobile_sw/mdavario_sw_bb_syncinst_03-2006.zip
PDF file:
https://after-sales-service.t-mobil...le/t-mobile_sw/mdavario_bda_sw_bb_03-2006.pdf
all in german.
i don´t have a MDA Vario, so i can´t try out.
I have the German MDA Vario but running QTEK 9100 Firmware on it .... seems it really needs the german rom to work/install properly. can anyone extract the cab file from the pocketpc client ? seems it cant launch the installer or setup program .... perhaps anyone has an idea on how to fix this ??
I too would really love info on this. We use a Blackberry Enterprise Server at work and I would be in heaven if I could use my HTC Wizard with it. Anyone??
-Keith
I don't want this fu**ing Berry Bull****, they should release a new AKU2 Rom!!!
The Vario BB client that you can download from T-Mobile Germany :
- Has a German installer
- but is English software
- Works on HTC Wizard and Universal devices, regardless of OEM (IMate, TMO, Qtek)
- But only on AKU1, not on AKU2
- and requires radio 1.12 (Wizard) or 1.06 (Universal)
- has T-Mobile settings coded into DLL files so cannot be used with other providers
(I have tested all variations)
I've installed this, I have VF account, it installs ok gets a PIN briefly gets IP address then disconnects, I have pushed the policies from our corporate BES Server, all downloaded ok, just need to check with our BES Manager to see if all setup on their end correctly, it WONT connect and stay connected, I can only assume this is a policy/encryption key issue.
What would be the best ROM for me to try this with VodaPhone BB Service...?
My actual Version is:
1.5.4.2 WWE
11/8/05
Radio 01.12.10
4.0.13.23
It connects quickly to the Blackberry Server but then disconnects.
I also am missing one of the Services (I have ALP,CHIME)
A colleague with a XDA 2 goy his working and he has 3 Services.
I have exactly the same question - which ROM would give us the #'s listed in the previous post?
The issue is the base ROM, I had to flash to a Tmobile Rom for the Tmobile Blackberry to work properly, I use Vodafone as the carrier but the corporate BES server as the Policy Push service. Vodafone will not let you set up a non VF device on their service hence having to use the Corporate BES server for email etc.. I dont need the VF service anyway
I tried the German Blackberry Connect software on both of my devices. One of them is a Qtek 9100 and the other is a Qtek 9090 (WM2003). I have a BES and a Blackberry 8700 for work.
I saw the same problem everyone else is seeing, in which the client will try to connect and then will disconnect and stay disconnected. I checked out the BES administrator and I confirmed that both clients have communicated with the BES because I was able to see each PIN associated with the Blackberry user in the admin tool.
I concur that the network settings for the client are hardcoded with Tmobile and probably will not work with any other carrier.
Anyone figure out a way to hack the client to set the network settings? Has anyone successfully registered their Blackberry Connect client using Cingular?
Hi there!
I have a t-mobile mda III for two months. It had the original latest rom released by t-mobile (TMUK 1.42 1.12 1.13.00). I tried to connect to my university's network with wlan, but i have to connect there by VPN too (Connections->My work network->VPN). It worked really good without any problem. But I downloaded the Helmi's wm5.0 rom and i upgraded it. My phone didn't work, so i downgraded back the official TMUK rom, but since that i can't connect to VPN. Everything else is okwith the pda, but i can't use the internet in the university (that connects to the network, but i can't use it without VPN). I think the upgrade and downgrade deleted or changed something in registry or something, i don't know, so please help me!!!!
Really thanks!
It won't be the registry, as the hard resets during the upgrade/downgrade should zap the registry.
VPN has a million things that can go wrong. Access to the server logs would likely point you in the correct direction. I actually gave up on the ipsec/l2tp implementation and switched to using OpenVPN. Far easier to set up, but probably not much use to you as you are limited to what the uni has.
Really thanks for OpenVPN, but i can't use this. I don't know how to use this exactly. In the uni is PPTP vpn, not IPSec, so could you give me some advice about programs to use it.
THX
Personally, I use a Linux server and this page (and others on the site) has been invaluable:
http://www.jacco2.dds.nl/networking/openswan-pocketpc.html
The built-in client on the PPC supports L2TP/IPsec and PPTP. OpenVPN is completely different and incompatible with either. This page contains info on all of the varieties of VPN:
http://www.natecarlson.com/linux/linux-vpn.php
As you are using PPTP, you should be able to follow guidelines for OpenSWAN, as I believe it supports PPTP. The first link I posted has info for the pocket pc.
These pages should help you out somewhat. I'd recommend setting it up on a desktop first as you will be able to see the client logs. Once you get it working, you may have figured out something specific to your university that you need to set.
i thought to ope a new thread about this.
i tried to get bb connect on wm6 (at&t) versions 2 and 4.
i didn't get any of them to work.
did sombody succeeded in the meantime?
is there a new version coming up?
hope te hear...
Tried them both too on my 750C w/ WM6, unsuccessful. Right now I am on BBC 4.0.0.90, still not working, getting from: No Connection -> Network Available -> Data Tunnel Available (at this point gets an IP address) -> No connection. The PIN is never generated so BBC is unusable for now. I was following a thread, http://forum.xda-developers.com/showthread.php?t=294218 , tried to modify my AKU version (didn't try to modify the build in the ROM though) w/ no results.
In the mean while, Hermes/ATT 8525 w/ WM6 and BBC 4.0.0.90 works just fine. What are we missing here ? Anyone w/ a clue ?
I am happy that someone opened a thread for this, I hope we'll get a fix.
Thanks,
HC
i've upgraded mine with wm6 non attws , unable to connect on bbc4 as well
does anybody know the latest b uild of the bb connect software (and where to get it)
i have (downloaded from vodafone nl)
blackberry version 4.0.0.67
transport version 4.0.0.70
and does anybody has a list of new features in later releases
I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC
i'm on 750v wm6.0 vodafone and can't get bbc4 to work
not even 2.1
argh!
pissing me off!
I recommend you just to wait a couple of days with the device switched off. I have a HTC Touch, vodafone, Germany. Downloaded Blackberry 2.1 and 4.0, didn't work. Never got a PIN ("PIN pending"). Read somewhere that it worked after a couple of days, so I switched my device off and was frustrated. I even wanted to sell it on eBay already. After 2 days I switched it on again, and, guess what, I had a PIN in the Blackberry software!!! Then I configured my Touch using BlackBerry Activesync Software, and it's now working!!!!!!!!!!!!!!!!!!!!!!!!! Version 4.0!!!!!!!!!!!!!!!!!!
So my recommendation: Try to wait 48 hours.
Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.
georgedorn said:
Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.
Click to expand...
Click to collapse
Wrong. I have been using BBC 4 on my Hermes for months with AT&T and as far as I know the Hermes is supposed to be a "blocked" device. It's not that RIM is blocking it, it's that the software has to be HEX edited to work with WM6. No version of BBC will work on WM6 on the Treo until someone smarter than me can cook up a ROM that is HEX edited to run BBC.
Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...
BBConnect for WM6
gnyf said:
Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...
Click to expand...
Click to collapse
I just got this and it works perfectly on my S710. I had got wipe the device and do a fresh install of the application. Give it a shot. Make sure you have an Active Sync connection to your device before trying to install.
http://sems.org/content/download/bbc4/bbconnect_wm6_standard_bb_4.0.0.84.zip
On the AT&T Rom you get Uncertified System Software detected on the install. I assume this is because the S710 is a smartphone rather than a WM device?
Strange thing today on my 750c - Got PIN
Hi all,
It seems that something is changing w/ either RIM or ATT. I installed again today BBC 4.0.0.90 onto my 750c w/ WM6 ATT leaked ROM, after the normal reboot, surprisingly, BBC service connected to the network and I got a PIN. Clearly it said "Connected" on the status tab. Well, I connected the device to my laptop and ran the BBC Desktop, the system was provisioned properly (I think ...), Notes Backend, but now it fails to connect to Blackberry, same symptoms as before, even after multiple soft resets, see comments above. I'll play around some more w/ it and let you all know if I get anything to work. In the mean while, if anyone else has any success, please share ....
Good luck
HC
PS. Posted this in the "Palm Treo 750" forum too ... hope I don't bother anyone
hchickers said:
I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC
Click to expand...
Click to collapse
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
hb88xx said:
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
Click to expand...
Click to collapse
Still doesn't work. I tried to install/uninstall etc. w/ same results, no connection. I am using the leaked ATT rom which otherwise works fine, no strings mods, just the rom w/o any modifications.
Hope this answers your question.
Good luck,
HC
BB Connect from HTC
Anyone have tried this ?
[email protected] said:
Anyone have tried this ?
Click to expand...
Click to collapse
Just did it, same result, no connection. I am uninstalling it right now. Too bad. Again, I think it has to do w/ the device type not the software itself. I have a 750C w/ leaked ATT rom
Anyone w/ other results ?
Thanks,
HC
Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.
mils said:
Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.
Click to expand...
Click to collapse
What kind of device ? 750C or 750V etc.
Thanks,
HC
750V with Vodafone WM6.
Now it flashes with an IP for about a second.
For many of us having BBC running is imperative for our proper "being connected".
RIM choose to be strict on blocking "unsupported" devices and BBC client versions. There is 2 major releases of Blackberry Connect - BC client version 2.X is stable, but limited on features and version 4.X, which has few welcomed additions, but also introduces quite few annoying problems. In this thread we can share our findings, which are either specific to Kaiser / Tilt or do apply to any device.
As a thread starter, I'll bring in the good news for those interested in making BBC2.X running on Kaiser / Tilt - it's simple. In addition to my signature's HEXing of any current WM6 .nbh ROM files, one would simply replace the unicode string "HTC-Kaiser" to "HTC-Hermes" , reflash, change the Aku string to .2.3.0 and BBC2 will work as a charm.
BBC threads collection:
=================
http://forum.xda-developers.com/showthread.php?t=294218
http://forum.xda-developers.com/showthread.php?t=409964
http://forum.xda-developers.com/showthread.php?t=395390
And if you aren't comfortable hex-editing your ROM, the 4.x version of BBC is supported on the Kaiser and Tilt. See these threads for more information.
http://forum.xda-developers.com/showthread.php?t=327695&highlight=blackberry
http://forum.xda-developers.com/showthread.php?t=330910&highlight=blackberry
HELP!! Blackberry Connect NOT working
Hello I have tried to get the BBC 4 working on my kaiser without success, on the kaiser I get a Pin Assigned, service connected and all but I don't get ANY email, the lookups all fail, the email I send from the Kaiser don't get sent but I don't get any error messages.
When I check the Blackberry connect desktop I see that it says PIN: unknown type, if I sync the device again I get a success message but again an unknown pin type
I'm using:
HTC Original ROM
Blackberry Version: 4.0.0.84
Transport Version: 4.0.0.86
Blackberry Enterprise Server: 4.1.2
System Version 77.122.174.117
I am on a coporate BES, which officially doesn't support BBC, is there any way they can block BBC devices?
Please any help will be greatly appreciated.
Thanks!!
Vinny
Connected. You just have to get provisioned.
jvloyola said:
Hello I have tried to get the BBC 4 working on my kaiser without success, on the kaiser I get a Pin Assigned, service connected and all but I don't get ANY email, the lookups all fail, the email I send from the Kaiser don't get sent but I don't get any error messages.
When I check the Blackberry connect desktop I see that it says PIN: unknown type, if I sync the device again I get a success message but again an unknown pin type
I'm using:
HTC Original ROM
Blackberry Version: 4.0.0.84
Transport Version: 4.0.0.86
Blackberry Enterprise Server: 4.1.2
System Version 77.122.174.117
I am on a coporate BES, which officially doesn't support BBC, is there any way they can block BBC devices?
Please any help will be greatly appreciated.
Thanks!!
Vinny
Click to expand...
Click to collapse
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
HExing you should be able to make any BBC client to connect on Hermes or Kaiser/Tilt with any current WM6 ROM.
hidefguy said:
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
Click to expand...
Click to collapse
hidefguy said:
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
Click to expand...
Click to collapse
I've found a solution to the problem you describe - see my post here:
http://forum.xda-developers.com/showpost.php?p=1608560&postcount=7
Problems getting provisioned
moisha said:
Connected. You just have to get provisioned.
Click to expand...
Click to collapse
That is precisely the problem when aI try to provision my kaiser via BBC Destop I get a sucess mesage but nothing happens, and every time I connect the kaiser says your email is set up for pin "unknown" do you wan to chang it to pin XXXXX?
So I guess I'm not getting provisioned right.
Any ideas?
Vinny
Hello moisha,
i am a bit confused. I had Blackberry 2.1.x running on my Hermes with a patched WM 6 Version. Now I try to implement it myself on my new Kaiser (t-mobile Germany). So far I followd the instructions under
I have not been successful so far. You recommend just to hex HTC-Kaiser to HTC-Hermes. I tried with Hexedit but could not find the string in the nbh file. I use the HTC German ROM for Kaiser (KaiserHTC_GER_1.56.407.3Reconstructed). Can you give me some more hints, how to proceed ???
Thanks ...
I have tried lots of..but none of them working.
anyone has the experience? please do give me some help. thanks you very much.
All non-beta versions work with me on Wifi. Mostly all custom ROMs have a copy of Live Messenger installed and it works.
What's your problem?
Check that your DNS and default gateway are properly configured and that you don't have a firewall blocking traffic. (Typical scenario)
If you have an older version, you need to keep hitting the disconnect on your cellular GPRS connection when trying to log in.
for me with Windows Live (10.6.33.0600) work normaly with GPRS, G3, WLAN, ActiveSync(USB)
_Dejan_ said:
for me with Windows Live (10.6.33.0600) work normaly with GPRS, G3, WLAN, ActiveSync(USB)
Click to expand...
Click to collapse
Can you share your WLM installation cab??
NooWay said:
Can you share your WLM installation cab??
Click to expand...
Click to collapse
Sorry but I dont have .cab file. I have only OEM package...
Looks like I have to flash my rom to get this sorted..
Windows_Live_10.6.33.0600__Fixed_.cab
http://rapidshare.com/files/70711028/Windows_Live_10.6.33.0600__Fixed_.cab
thats the one ive used in my MDA vario and it works fine with wifi