Hey whats up guys, just a curious question I have regarding the comm manager in WM5. When using stock version of WM5 2.26 from T-Mobile on my MDA and using a program called Navizon with my GPS, I am able to calcualte a lot of Wi-Fi Access points and Cell Phone towers using the Comm Manager supplied with the stock. I am talking about, on my regular commute about 400-600 AP's and varied on towers. I have upgraded my Rom many of times with different variations of WM5 and WM6 and also reflashed my Radio rom with many different radio versions, with WM5 stock, customs, and WM6, and each came with a different comm manager than stock, and after doing so I am now only able to gain maybe 7 AP's on my normal commute but Cellphone Towers are good.
So my question is, is it possible to get the comm manager from stock WM5 and install it within any custom roms already to created to see if that really has something to do with why I am not gaining any data while using this program, and if that might not be the case, then what exactly could be the problem when trying to collect the data at all. Thanks in advance.
Man, over 75 views and not a single yest it can be done or no it cannot be done, come on guys somebody gots to know a simple yes or no answer!
Hi,
If you mean the "CommManager.exe" file, yes it can be done.
I'm building my own WM6 rom (orwel based).
As I liked better the CommManager.exe from the Tmobile 2.26 stockROM, I installed it.
Simply extract the file from the CommManager.exe T-Mobile ROM and copy it over to an already installed rom or integrate it in your new rom.
You also might want to tune the Software\HTC\CommManager registry key to make sure that you have 8 buttons on it, instead of the regular 7 of the other roms.
eluth.
eluth said:
Hi,
If you mean the "CommManager.exe" file, yes it can be done.
I'm building my own WM6 rom (orwel based).
As I liked better the CommManager.exe from the Tmobile 2.26 stockROM, I installed it.
Simply extract the file from the CommManager.exe T-Mobile ROM and copy it over to an already installed rom or integrate it in your new rom.
You also might want to tune the Software\HTC\CommManager registry key to make sure that you have 8 buttons on it, instead of the regular 7 of the other roms.
eluth.
Click to expand...
Click to collapse
Hey eluth, thanks for the reply man. I didnt realize it was that simple, but a quick question, is their a tutorial you can point me to as far as extracting the .exe file, or do I have to flash rom with stock, transfer over to pc, reflash with custom rom, transfer back over. Basically Im looking for a simpler way of extracting than the above, thanks in advance.
Nice advice!
I've done it!
Great - I see my loving 8-buttons!!!
I would also love to have it again. Can somebody share old commanager.exe and reg. file here?
I changed the key to show 8 and it says "Comm Manager supports 7 functions at most!"
Any ideas?
I guess what I am asking is what is the 8th button for and how do I go about mapping it in (if that's even possible)?
trojan9x said:
I changed the key to show 8 and it says "Comm Manager supports 7 functions at most!"
Any ideas?
Click to expand...
Click to collapse
It looks like you have a 7-button manager, you need an 8-button.
Try this: (attach)
(the 8th entry in the registry should contain one default value - "IR", similar to 7 others)
P.S.: do not pay attension on the file size - it's just compressed by upx
Thanks fellaz, hopes this fixes my issue with Navizon.
eluth said:
Hi,
If you mean the "CommManager.exe" file, yes it can be done.
I'm building my own WM6 rom (orwel based).
As I liked better the CommManager.exe from the Tmobile 2.26 stockROM, I installed it.
Simply extract the file from the CommManager.exe T-Mobile ROM and copy it over to an already installed rom or integrate it in your new rom.
You also might want to tune the Software\HTC\CommManager registry key to make sure that you have 8 buttons on it, instead of the regular 7 of the other roms.
eluth.
Click to expand...
Click to collapse
Thanks for this post! I have been looking for this for months!!!
It did not work for me. It had the same 7 buttons on top of 8 pieces of text. The file size was considerably smaller than my 7 button commmanager.exe as well.
trojan9x said:
It did not work for me. It had the same 7 buttons on top of 8 pieces of text. The file size was considerably smaller than my 7 button commmanager.exe as well.
Click to expand...
Click to collapse
(the 8th entry in the registry should contain one default value - "IR", similar to 7 others)
Will that create the button as well? When Comm manager loaded it still had only 7 graphical buttons on top of 8 pieces of text.
I tried and it worked... thank you
cab file for easy install
I didn't test it 'cose I allready have it...
Did anybody tried to install the VOIP.cab too ?
Funny thing is that most users reports registry entry started from 1 but mine started from 0 (phone entry, in WM6 MB edition)? I suggest all not to use cab files, but manually perform registry changes. Adding VOIP button is OK, I don't have error in settings menu I used to have without it.
naboleo said:
Did anybody tried to install the VOIP.cab too ?
Click to expand...
Click to collapse
yes, but no change
Related
It's too good to believe:
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
I'm downloading now.
Tom
39.6MB (their server is really slow today)
From i-mate site:
The details of the new ROM image are:
For the Worldwide English Build:
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.12.00
Protocol version 1337.42
ExtROM version: 1.40.176 WWE
I think they waited until the pros on this site figured everything out first...then they just piggy-backed on their findings. Kudos to the real pros on XDA-devel!!!
tom
How to install this rom in Spanish Qtek 9090, i'm new and y don't now very well to change the language.
Thank you!
imate update
I just got the update from the I-mate site and am working it with the XDA tools but I'm getting a checksum errors on the radio, NK, and MS filles. Should I be using a different tool? My device is a MDA III T-mobile german flashed to english. Any Ideas???
Downloaded, installed and running. No problems....yet. I can't find a config file in the extrom in order to make some changes, but there's a setup.exe file now. Not sure what that's about.
No idea how to change the language...I'm not good enough to know that.
More later.
Tom
So far so good. A couple issues. 1) the phone off (or flight mode on) is no longer activated by the Call End button. Shame...I loved that feature. 2) I have a problem turning the phone on (flight mode off) after a soft reset. I think it may be caused by the Contacts Button addin. The only way I can turn on the phone is to go into the keypad and then turn it on. All other methods cause the system to lockup.
Tom
Temporary copy...
Until someone puts it up on xda-developers / cooks it,
a MUCH faster loading copy is at
http://www.myehud.com/BlueAngel/PDA2k_WWE_14000_176_11200.exe
Ehud
Great!!!!!
I'm downloading it right now!!
i-mate finally released it after 1000's of unkept promises!
FINALLY!!! Here's to hoping it will be better than the Qtek version!
Again, I would like to ask why there is no config file??? I take it setup.exe has the config file built in? If any of the pros can give me some feedback as to this, I would appreciate it. I'd like to drop in several cab files incase I fubar something down the road.
Thanks,
Tom
P.S. almost 6 hours and only the "turning on the phone" problem.
yes... config is missing...
will try out some combinations .
skype is taking 3.8 megs... i don't need it there.
sunish said:
skype is taking 3.8 megs... i don't need it there.
Click to expand...
Click to collapse
Ture...true. Skype was fun the first couple times, but with VOIP at home, I really don't need it anymore. Still, kind of cool to show people...if you have someone that you can connect to.
Tom
Tried some combos, including, using the old config and setup files... nothing wrorks,
only thing is that any additional file found in ext rom is treated as a carrier customization file, and on selecting one file , that particular file will be installed..
also, i noticed that there is one config file in the windows directory.
Just take the Autorun.exe and config.txt from another rom, add in the cabs from the i-mate rom, and there you go.
Yeah, I will be removing Skype ASAP myself. I can understand how it could be useful, but for my purposes, it just takes up space.
The Setup.exe is way better then the config
Leave the setup the exe it is better then the config. with the config you have to site the and write a line for each cab file. the setup.exe automatically runs every cab file in the ext rom. whether you put it there or not. So when cookinh your extended rom no need to keep having to change the config.txt. The setup will run whatevers there.
You can find this new ROM at ftp upload folder hope MDAIIIUser can move to wiki , I will upload ext.ROM by tomorrow
TheLastOne said:
Just take the Autorun.exe and config.txt from another rom, add in the cabs from the i-mate rom, and there you go.
Click to expand...
Click to collapse
Tried that , removed setup.exe , copy old autorun.exe and made new config file,
but didn't worked out..
Re: The Setup.exe is way better then the config
MarcValme said:
Leave the setup the exe it is better then the config. with the config you have to site the and write a line for each cab file. the setup.exe automatically runs every cab file in the ext rom. whether you put it there or not. So when cookinh your extended rom no need to keep having to change the config.txt. The setup will run whatevers there.
Click to expand...
Click to collapse
Do I need to keep autorun.exe ? If yes, then which one old or new?
sunish, I can not imagine why it would not work. You must have made a mistake somewhere.
The WMP10 close problem still exists, which leads me to conclude that it is indeed a problem with the 1.40 CE Rom, and not something within the Extended rom muddling it up.
Has anyone seem any actual improvements with this rom over Qtek's? All of the same problems still to be in place. The extended rom has a few different (but unimportant) cabs, but that's about it.
MarcValme, I'm not so sure I agree. One of the good things about the config.txt file is that you can specify the order in which the cabs install, which does actually make a difference in a few circumstances. Food for thought.
TheLastOne,
Don't know / Can't figure out where is the problem.
No combination is working for me.
Maybe will try it again after a day or so.
Right now, after unhiding the Ext ROM, I'm installing all the programs needed by me manually.
One thing that I noticed is the increase in speed... The performance is somewhat better now...
is it possible to make an already full patched(button fix,camera,bluetooth,etc) rom with all basic programs (such as mms client,stk,backlight,etc)?
i think yes but i'm not able to make it..it will be very usefull for newbies such me..
with this full rom you do not need to post lots of duplicated threads and all will works since the beginning..
yeah i would like that to,
so we only have to install it without patching and so
very good idea!!!!
but now, apart the Wiki, there is a list of all patchs that must be installed?!
'cause I don't have enough time to read alle the pages in WM5 problem resolutions thread
well,
so far, i created a project for a extended rom under wm2005.
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Extended_ROM
Butt im stuck, it will not install off the rom after a hard reset.
If this would be working we do not have to worry anymore if we forgot or lost our sd card for the neccesary patches.
i think yes
i can make a list but someone has to do that
i think tha the 'default' are:
camera fix
wm5_v3 fix
button fix
midi with album fix
missing system programs (mycpl.rar)
traylauncher
wifi programs
sim manager
and a set of default programs:
pdf reader
xscaler
pocketplus
pocketrar
etc..
I would say no, i'd rather have the choice to install what patches i want. For instance if i dont use MMS or prefer the soft keys of WM5. The way it is now you can configure the device just as you want. Getting a working extended rom you can customise would be my choice. I definitely wouldnt want Pocketplus installed by default on my device.
It has to work first.
So anybody already found a working autorun.exe and config.txt files?
I Tried alot of those two, but still not able to get it working under te extended rom after a hard reset.
efjay said:
I would say no, i'd rather have the choice to install what patches i want. For instance if i dont use MMS or prefer the soft keys of WM5. The way it is now you can configure the device just as you want. Getting a working extended rom you can customise would be my choice. I definitely wouldnt want Pocketplus installed by default on my device.
Click to expand...
Click to collapse
you don't have to use the all in one pack..
it's only the noob choise..and very easy to use..
flagg said:
efjay said:
I would say no, i'd rather have the choice to install what patches i want. For instance if i dont use MMS or prefer the soft keys of WM5. The way it is now you can configure the device just as you want. Getting a working extended rom you can customise would be my choice. I definitely wouldnt want Pocketplus installed by default on my device.
Click to expand...
Click to collapse
you don't have to use the all in one pack..
it's only the noob choise..and very easy to use..
Click to expand...
Click to collapse
Yes i dont have to use it; but if the patches are no longer released separately then i have no choice. If there is a choice of all-in-one rom and non-patched that will be ok. But you have to think of who creates the rom, it may be easier just to maintain one rom version. I guess we have to wait and see..
@pimbo have you tried the autorun from the K-Jam extended rom? May be different from the Universal files. Its here ftp://ftp.xda-developers.com/Uploads/
efjay said:
@pimbo have you tried the autorun from the K-Jam extended rom? May be different from the Universal files. Its here ftp://ftp.xda-developers.com/Uploads/
Click to expand...
Click to collapse
Not yet, preparing my device now, autorun is 17kb from this one
setup is 104kb, looks common, exept the dates are a bit older.
Manually launching the autorun of files on the extended rom will work, so i guess that i have to do a hardreset again, thats what i going to do later the evening. lol 8)
:evil: :evil:
No luck. wil not automaticly run.
Still need to make the rom visible and run the autorun.exe for the installs.
But this is the nearest solution for now i guess.
So you still need a single cabfile on a sd card to unhide your rom and install all files on there.
If anybody knows the bytes to change in the nbk or nbf files or maybe in the bootstrap, the adaption could be completed and the patches would automaticly install after a hardreset. .
please don't OT
...so
dev can make all in one rom and single patch
flagg said:
i think yes
i can make a list but someone has to do that
i think tha the 'default' are:
camera fix
wm5_v3 fix
button fix
midi with album fix
missing system programs (mycpl.rar)
traylauncher
wifi programs
sim manager
Click to expand...
Click to collapse
ok!!!!
From the Wiki...
camera fix [Camera2K5_v1.rar]
wm5_v3 fix [ba_wm5_fix_v3.rar]
button fix [Buttons_Fix_v2.rar]
midi with album fix [Album with midi.rar]
-------------------------------------------------
traylauncher [http://www.phm.lu/Products/PocketPC/PowerToys/]
sim manager [ftp://xda-developers.com/Uploads/Blueangel/wm5_test/AsukalSIMManger.cab]
missing system programs [mycpl.rar --> ftp://xda-developers.com/BlueAngel/BA_WM5/Patches/Old Patches/mycpl.rar]
wifi programs [ftp://xda-developers.com/BlueAngel/Programs/WIFI/Retina digital security/RetinaWiFiPoc.exe]
right?!
i for one would love an all encompassing rom patch. reading through all the duplicate posts and other resolutions is a real hassle for noobs. we see the same questions being asked every 3 days or so and it just creates more clutter for the other noobs to sift through. i figure a lot of those fixes should be included in the next patch of the current wm5 rom anyhow if people rather wait for that to come around.
Closer said:
flagg said:
i think yes
i can make a list but someone has to do that
i think tha the 'default' are:
camera fix
wm5_v3 fix
button fix
midi with album fix
missing system programs (mycpl.rar)
traylauncher
wifi programs
sim manager
Click to expand...
Click to collapse
ok!!!!
From the Wiki...
camera fix [Camera2K5_v1.rar]
wm5_v3 fix [ba_wm5_fix_v3.rar]
button fix [Buttons_Fix_v2.rar]
midi with album fix [Album with midi.rar]
-------------------------------------------------
traylauncher [http://www.phm.lu/Products/PocketPC/PowerToys/]
sim manager [ftp://xda-developers.com/Uploads/Blueangel/wm5_test/AsukalSIMManger.cab]
missing system programs [mycpl.rar --> ftp://xda-developers.com/BlueAngel/BA_WM5/Patches/Old Patches/mycpl.rar]
wifi programs [ftp://xda-developers.com/BlueAngel/Programs/WIFI/Retina digital security/RetinaWiFiPoc.exe]
right?!
Click to expand...
Click to collapse
nice job..so we have only to wait maimac or someone else..
we are all noob..we are all waiting for you :lol:
if ppl want to install single patch one by one they can do that
but i think that for noobs this is such as an "official" rom
tested and approved from xda devs
please try to create folder named 2577 in your extrom and place autorun in that folder.
it should be executed automatically...
buzz
buzz_lightyear said:
please try to create folder named 2577 in your extrom and place autorun in that folder.
it should be executed automatically...
buzz
Click to expand...
Click to collapse
did not work, did the autorun in a folder called 2577. cab files on the root.
did a hard reset, but would still not install.
The screen of the 3sec before install wont pop up
But after i made my extended rom visible, it automaticly runs after a soft reset.(the 3sec screen pops up )
(last problem?)
But i'm going to get some sleep now, maybe that will help a bit :shock:
flagg said:
nice job..so we have only to wait maimac or someone else..
Click to expand...
Click to collapse
OK! now I'm ready to flash with Mamaich Patch 3 ..
buzz_lightyear said:
please try to create folder named 2577 in your extrom and place autorun in that folder.
it should be executed automatically...
Click to expand...
Click to collapse
This would not work. WM5 on BA lacks registry settings and driver for the extended_rom folder.
mamaich said:
buzz_lightyear said:
please try to create folder named 2577 in your extrom and place autorun in that folder.
it should be executed automatically...
Click to expand...
Click to collapse
This would not work. WM5 on BA lacks registry settings and driver for the extended_rom folder.
Click to expand...
Click to collapse
ok, then put that folder on your SD card.
buzz
I think this deserves its own topic. Original post from Tuatara:
Hi everyone ...
Sorry, I've run out of time for providing you with an updated ROM which I wanted to have feature complete. I'm off on vacation tomorrow for 2 weeks, and can't keep working on it until I'm back.
I've been playing around with many things (adding/removing files, fixing the Midlet Manager, updating Camera, etc.) but I haven't got the ROM to the point where I feel it's 100% ready for others - but having said that, I've uploaded it to XDA Dev, and you're welcome to give it a try and see if it improves things for you.
This is MAINLY an update from Mamaich's v2a ROM, which does contain the Quantum Timing Patch, and the Performance Tweaks.
I've also made a few filesystem changes - predominantly removing the Midlet Manager (which wasn't working), applied all of the Performance Tweaks as per the thread (and a few more), changed the default startup elements to suit my tastes (at the moment), and added some useful programs and details to the ROM. (psShutXP, Running Programs, Shortcuts to missing elements, etc.)
The ROM is in /Uploads/Blue Angel/wm5_test/Tuatara_v2a_Custom.zip
Inside the ZIP file is the nk.nba file, along with the updated registry files (boot.rgu, default.rgu, and user.rgu) which have been merged in. I've unfortunately forgotten to include initflashfiles.dat in the ZIP, but that file is directly available from inside the ROM anyways.
The ZIP also contains a different EXTROM - only the missing files, camera, and midlet manager are needed now, and there is no warning about publisher on installation anymore. You can obviously customize the EXTROM cfg.txt file to your liking, and install anything and everything all at once.
Additionally the ROM itself still has some additional space for applications, so if you want to cook your own, there is some space available to add more.
Sorry I won't be able to answer any questions about this ROM, or handle issues on it for two weeks, so it's up to you if you want to try it (or just decompose it and look at the changes).
Enjoy, and I hope everything goes well.
Regards,
Robert.
Click to expand...
Click to collapse
For further information and download, visit the WiKi.
Personal thoughts: I think this ROM gives some performance boost indeed, not much, but it is noticable. Nearly every bug is fixed now, only the bluetooth disconnect issue is left. My BA is fianlly shows itself disconnected when i take it off the cradle (with the previous ROMs, it often showed that it is still connected).
Enabling SmartDialing
Hi, I've tried this ROM & this definitely faster! Thanks!
But I can't seem to enable SmartDialilng by removing the "_" from the mfc80u.dll_ and msvcr80.dll_ files for SmartDial will start to work? These 2 files are missing from this ROM but even after I've copied these 2 files into the \Windows folder, SmartDialing still doesn't work. Any ideas?
Re: Enabling SmartDialing
paullim29 said:
Hi, I've tried this ROM & this definitely faster! Thanks!
But I can't seem to enable SmartDialilng by removing the "_" from the mfc80u.dll_ and msvcr80.dll_ files for SmartDial will start to work? These 2 files are missing from this ROM but even after I've copied these 2 files into the \Windows folder, SmartDialing still doesn't work. Any ideas?
Click to expand...
Click to collapse
I should take a look at one of the early versions of "New menu for WM5" (anything below 1.0.0 beta). Does anyone still have the CABs?
Re: Enabling SmartDialing
KTamas said:
paullim29 said:
Hi, I've tried this ROM & this definitely faster! Thanks!
But I can't seem to enable SmartDialilng by removing the "_" from the mfc80u.dll_ and msvcr80.dll_ files for SmartDial will start to work? These 2 files are missing from this ROM but even after I've copied these 2 files into the \Windows folder, SmartDialing still doesn't work. Any ideas?
Click to expand...
Click to collapse
I should take a look at one of the early versions of "New menu for WM5" (anything below 1.0.0 beta). Does anyone still have the CABs?
Click to expand...
Click to collapse
Here you go.
paullim29. These correct the problem for me.
Re: Enabling SmartDialing
rschell said:
KTamas said:
paullim29 said:
Hi, I've tried this ROM & this definitely faster! Thanks!
But I can't seem to enable SmartDialilng by removing the "_" from the mfc80u.dll_ and msvcr80.dll_ files for SmartDial will start to work? These 2 files are missing from this ROM but even after I've copied these 2 files into the \Windows folder, SmartDialing still doesn't work. Any ideas?
Click to expand...
Click to collapse
I should take a look at one of the early versions of "New menu for WM5" (anything below 1.0.0 beta). Does anyone still have the CABs?
Click to expand...
Click to collapse
Here you go.
paullim29. These correct the problem for me.
Click to expand...
Click to collapse
Created a cab file and added to WiKi. Thanks.
Missing MMS client?
Hi,
I s to be missing my MMS client. I see an option for the MMS configuration but am missing the MMS application? Anyone facing this issue?
Re: Missing MMS client?
deepakr said:
Hi,
I s to be missing my MMS client. I see an option for the MMS configuration but am missing the MMS application? Anyone facing this issue?
Click to expand...
Click to collapse
Hmm it seems that MMS is broken in this ROM indeed. Will add to WiKi.
mediaplayer still have a problem for playing in background
anybody solve this problem?
a771la said:
mediaplayer still have a problem for playing in background
anybody solve this problem?
Click to expand...
Click to collapse
You should try a different program, such as GSPlayer or TCPMP.
ok... i use TCPMP
but i want to know mediaplayer don't work on this rom
ok himalaya's rom work for me
I downloaded the new Rom and having a little trouble trying to download to my SX66. I have upgraded and downgraded the WM5 on my SX66 several times. I was wondering since the rom file is nba instead of nbf does that make a huge difference. I admit have have not messed around with my device data cause I find that a little complicated. I usaully use the MA_Upgrade cause I don't have to tweak too much. Any suggestions?
Mr Chicago said:
I downloaded the new Rom and having a little trouble trying to download to my SX66. I have upgraded and downgraded the WM5 on my SX66 several times. I was wondering since the rom file is nba instead of nbf does that make a huge difference. I admit have have not messed around with my device data cause I find that a little complicated. I usaully use the MA_Upgrade cause I don't have to tweak too much. Any suggestions?
Click to expand...
Click to collapse
In this case, you should use the harder way. Read step 4 of the upgrading process (see wiki) to upgrade via BaUpgradeUt.exe.
Mr Chicago said:
I downloaded the new Rom and having a little trouble trying to download to my SX66. I have upgraded and downgraded the WM5 on my SX66 several times. I was wondering since the rom file is nba instead of nbf does that make a huge difference. I admit have have not messed around with my device data cause I find that a little complicated. I usaully use the MA_Upgrade cause I don't have to tweak too much. Any suggestions?
Click to expand...
Click to collapse
The nk.nba file needs to be converted back to nk.nbf regardless of whether you use MA_Upgrade or BA_Upgrade. I use MA_Upgrade. There is an modelid entry of the USER.rgu that should be changed to PH20B1. I'm not sure whether these *.rgu files need to be copied to the \windows dir or added back into the nk.nba file. Any thoughts KTamas, i'm thinking the later.
rschell said:
Mr Chicago said:
I downloaded the new Rom and having a little trouble trying to download to my SX66. I have upgraded and downgraded the WM5 on my SX66 several times. I was wondering since the rom file is nba instead of nbf does that make a huge difference. I admit have have not messed around with my device data cause I find that a little complicated. I usaully use the MA_Upgrade cause I don't have to tweak too much. Any suggestions?
Click to expand...
Click to collapse
The nk.nba file needs to be converted back to nk.nbf regardless of whether you use MA_Upgrade or BA_Upgrade. I use MA_Upgrade. There is an modelid entry of the USER.rgu that should be changed to PH20B1. I'm not sure whether these *.rgu files need to be copied to the \windows dir or added back into the nk.nba file. Any thoughts KTamas, i'm thinking the later.
Click to expand...
Click to collapse
You don't have to do anything with RGU files at all. You need to use xda3nbftool (with editfix.bat if you want) to patch the ROM.
Hi,
just upgraded to new rom and noticed i can't sync calender and contacts.
anybody has the same?
Gr
Paul
kluggie56 said:
Hi,
just upgraded to new rom and noticed i can't sync calender and contacts.
anybody has the same?
Gr
Paul
Click to expand...
Click to collapse
Both works well for me...What error exactly do you get?
KTamas said:
kluggie56 said:
Hi,
just upgraded to new rom and noticed i can't sync calender and contacts.
anybody has the same?
Gr
Paul
Click to expand...
Click to collapse
Both works well for me...What error exactly do you get?
Click to expand...
Click to collapse
Nothing....that's strange. I'ts syncing, but Outlook has all data and my BA nothing. I've tryed reinstalling all, but no luck, even reinstalled my BA. No luck sofar.
Sorry,
Activesync gives the following message,
There is not enough free memory on tour device to synchronise information. Close programs that are free to up memory, or restart the device.
Ondersteuningscode 8007000e
gr
Paul
Sorry,
Activesync gives the following message,
There is not enough free memory on tour device to synchronise information. Close programs that are running to free up memory, or restart the device.
Ondersteuningscode 8007000e
gr
Paul
I've uploaded a 2.17 ROM that has .NET Compact Framework 2 integrated. The files for CF2 are in the ROM, and the necessary registry entries are created via a cab file that is part of the extended ROM. If you bypass execution of the ext ROM customizations, you won't have the necessary registry keys for CF2 to function.
I should probably repeat that: If you bypass execution of the ext ROM customizations, you won't have the necessary registry keys for CF2 to function. (nor will you have the Cingular customizations including GPRS and MMS settings).
The ROM is based on the 2.17 version that has lots 'o extra ringers and themes, and OmapClock. Makes tatertots too.
If you don't know what CF2 is and have never installed software that requires it (not much does..the most popular is probably WiFiFoFum) then there's no need to flash to this ROM. However if you do use applications that require CF2, you'll benefit from the storage space savings by having CF2 in ROM.
For first-time upgraders from stock devices, I beg of you, please, no matter what you read about successful flashes without CID unlocking, do yourself (and my inbox) a favor and CID unlock anyway. =)
The ROM is available here:
ftp://xda:[email protected]_RUU_WIZARD_217_AKU2_WWE_RNGRS_OCLOCK_CF2.exe
I may create one based on 2.08 at some point down the road.
Thanks, and enjoy. and whatnot. and what have you. and stuff.
EDIT: fixed link since it's been moved. Not sure why it was put in a Cingular subdir of the main Cingular dir..
Sorry to be the total noob...
I installed the custom_ruu_wizard_217_aku2_cingular_wwe. (BTW, a great piece of work).
Do I need to downgrade to the stock Cingular rom before flashing this rom?
gixerguy said:
Sorry to be the total noob...
I installed the custom_ruu_wizard_217_aku2_cingular_wwe. (BTW, a great piece of work).
Do I need to downgrade to the stock Cingular rom before flashing this rom?
Click to expand...
Click to collapse
No sir
Re: Cingular 8125 users: 217 ROM w/ Compact Framework 2 on f
summiter said:
...
I may create one based on 2.08 at some point down the road....
Click to expand...
Click to collapse
I for one would appreciate a 2.8 version of the same. Thanks for all your efforts.
Still no luck extracting the A2DP stuff and including it with the 2.17 version eh?
Shankar.
how to rerun customizations
is it possible to run the customization routines later (after the first reboot from RMO upgrade)? I wonder if this would work (to preserve prior settings/applications):
Backup using SPB
Install new 2.17 rom on top of old 2.17 rom
cancel customizations
install backup file (which will overwrite registry)
run new customization to add CF2 to registry
Or, can you upload the CAB with the CF2 reg entries so it can be run again later?
thanks,
jason
Summiter, I tried the 2.17 ROM with Cingular customizations, ringers, themes, and OmapClock last night. (I unlocked CID, and SIM as well just in case.) It worked great. Nice job and many thanks!
This new ROM sounds even better, but the download is broken
azagahl said:
This new ROM sounds even better, but the download is broken
Click to expand...
Click to collapse
It's there but there is an extra Cingular directory try ftp://xda-developers.com/Wizard/Rom..._RUU_WIZARD_217_AKU2_WWE_RNGRS_OCLOCK_CF2.exe
Summiter,
I removed CF2, backed up, then installed this ROM and then reloaded my back up. Did I lose my CF2 registry settings by reloading the back up of a non-CF2 system? My WiFiFoFum2 doesn't work now but I don't know how to tell if the CF2 is loaded properly.
Mike H
holmanm said:
azagahl said:
This new ROM sounds even better, but the download is broken
Click to expand...
Click to collapse
It's there but there is an extra Cingular directory try ftp://xda-developers.com/Wizard/Rom..._RUU_WIZARD_217_AKU2_WWE_RNGRS_OCLOCK_CF2.exe
Summiter,
I removed CF2, backed up, then installed this ROM and then reloaded my back up. Did I lose my CF2 registry settings by reloading the back up of a non-CF2 system? My WiFiFoFum2 doesn't work now but I don't know how to tell if the CF2 is loaded properly.
Mike H
Click to expand...
Click to collapse
That's what happened - you wrote over your registry with the one that no longer has the CF2 keys. When I get home in a couple hours I'll attach the cab file to my reply that will recreate them.
Re: how to rerun customizations
jse75 said:
is it possible to run the customization routines later (after the first reboot from RMO upgrade)? I wonder if this would work (to preserve prior settings/applications):
Backup using SPB
Install new 2.17 rom on top of old 2.17 rom
cancel customizations
install backup file (which will overwrite registry)
run new customization to add CF2 to registry
Or, can you upload the CAB with the CF2 reg entries so it can be run again later?
thanks,
jason
Click to expand...
Click to collapse
I'll attach the cab file to a message shortly.
Summiter you once again kick ass!
Thanks dude!
Steven
Cingular 8125 A2DP and DP with newest Summiter ROM
Went to Tornado Group downloaded Bluetooth files files installed them, tweaked the registry and I am running the newest ROM with A2DP. Thanks summiter for the ROM and the Tornado folks for the files.
http://forum.xda-developers.com/viewtopic.php?t=48491
Eureka.
PS Not the 2.8 but 2.17.
Ok,
I must be an idiot. I've downloaded the ROM and it doesn't have CF2, ringers, the extra themes, overclock, etc. I tried it earlier today - then just to make sure I pulled it down and flashed it again - no go.
Like I said, I'm probably doing something wrong, but...
Re: Cingular 8125 users: 217 ROM w/ Compact Framework 2 on f
summiter said:
If you bypass execution of the ext ROM customizations, you won't have the necessary registry keys for CF2 to function. (nor will you have the Cingular customizations including GPRS and MMS settings).
Click to expand...
Click to collapse
hi. at the risk of sounding like an idiot as well, now do you NOT bypass the customization? thank you.
is it the thing that installs as soon as you configure tapping the four corners? i didn't even know that was bypassable.
CF2 cab file
Attached is the cab file to create the registry entries for CF2.
It won't help you if your flash to the CF2 ROM was not fully successful. This file is for folks who's flash was successful but have restored their registry from a backup of a non-CF2 ROM.
Re: CF2 cab file
summiter said:
Attached is the cab file to create the registry entries for CF2.
It won't help you if your flash to the CF2 ROM was not fully successful. This file is for folks who's flash was successful but have restored their registry from a backup of a non-CF2 ROM.
Click to expand...
Click to collapse
hi summiter,
a couple questions sir for your GREAT GREAT ROM (MUCH FASTER).
do i just click on it and it just runs at that speed? so if i click on 252 it runs at that speed forever until i click back on 200?
also, how do i know if i didn't bypass the customization?
thanks a million for a job well done.
Re: CF2 cab file
macrochild said:
summiter said:
Attached is the cab file to create the registry entries for CF2.
It won't help you if your flash to the CF2 ROM was not fully successful. This file is for folks who's flash was successful but have restored their registry from a backup of a non-CF2 ROM.
Click to expand...
Click to collapse
hi summiter,
a couple questions sir for your GREAT GREAT ROM (MUCH FASTER).
do i just click on it and it just runs at that speed? so if i click on 252 it runs at that speed forever until i click back on 200?
also, how do i know if i didn't bypass the customization?
thanks a million for a job well done.
Click to expand...
Click to collapse
When you click one of the links, it will set the clock to that speed until you suspend the device by pressing the power button briefly or it times out.
What I've done is map my camera button to the 252 link, so when I need an extra boost I just hit the button. It will stay overclocked until I suspend the device.
If you want it overclocked always and forever, you'll have to call OmapClock with a notification event which requires a 3rd party app to set up. Read through the OmapClock threads to find out more.
I like the having it rest to stock speed on suspend since it conserves battery by only being overclocked when needed.
CameronJ said:
Ok,
I must be an idiot. I've downloaded the ROM and it doesn't have CF2, ringers, the extra themes, overclock, etc. I tried it earlier today - then just to make sure I pulled it down and flashed it again - no go.
Like I said, I'm probably doing something wrong, but...
Click to expand...
Click to collapse
CID unlocked?
Re: Cingular 8125 users: 217 ROM w/ Compact Framework 2 on f
macrochild said:
summiter said:
If you bypass execution of the ext ROM customizations, you won't have the necessary registry keys for CF2 to function. (nor will you have the Cingular customizations including GPRS and MMS settings).
Click to expand...
Click to collapse
hi. at the risk of sounding like an idiot as well, now do you NOT bypass the customization? thank you.
is it the thing that installs as soon as you configure tapping the four corners? i didn't even know that was bypassable.
Click to expand...
Click to collapse
Yep - the customizations run after you get past the alignment stuff. It's the part where you are locked out of your device while a perdy progress bar takes its sweet ass time as it installs countless cab files.
If you were so inclined, you can bypass customization by pressing the soft reset button as soon as the poorly worded notification pops up saying "It will now customize....". I don't recommend that.
WiFiFoFum working?
Has anyone successfully run WiFiFoFum with this ROM? I had a seemingly successful flash (I had the long wait for installation after the alignment on the first boot). Everything seems to work except WiFiFoFum. I haven't tried anything else that requires CF2 yet, but WiFiFoFum gives me an error:
Code:
This application (WiFiFoFum.exe) requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.
When I click "Details" I get:
Code:
WiFiFoFum.exe
InvalidProgramException
I even installed the cab file provided above to make sure the registry was right.
Essentially I'd like to know if this is known to work okay so I'll know that I should try flashing it again.
Allen
P.S. Thanks for all of the work summiter - I don't think I could have done this myself...
Re: WiFiFoFum working?
Allen09 said:
Has anyone successfully run WiFiFoFum with this ROM? I had a seemingly successful flash (I had the long wait for installation after the alignment on the first boot). Everything seems to work except WiFiFoFum. I haven't tried anything else that requires CF2 yet, but WiFiFoFum gives me an error:
Code:
This application (WiFiFoFum.exe) requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.
When I click "Details" I get:
Code:
WiFiFoFum.exe
InvalidProgramException
I even installed the cab file provided above to make sure the registry was right.
Essentially I'd like to know if this is known to work okay so I'll know that I should try flashing it again.
Allen
P.S. Thanks for all of the work summiter - I don't think I could have done this myself...
Click to expand...
Click to collapse
Appears as though the flash didn't take. If you execute cgacutil.exe in the Windows directory, what CF versions are reported?
What ROM did you have prior to this one?
Does anyone know if the Orange M700 Today plugin is available as a CAB anywhere or something similar? After upgrding to WM6 my other half is fit to kill me as she really liked it. I tried tempting her with SPB Shell but got one of those icy stares
Maybe you should have a look in the extended ROM, the installation might be here...
Super Sheep said:
Maybe you should have a look in the extended ROM, the installation might be here...
Click to expand...
Click to collapse
Thanks SS, it's a good idea but unfortunately the ExtROM doesn't contain much of interest.
http://forum.xda-developers.com/showpost.php?p=1213228&postcount=11
The UK M700 ext rom is pretty useless actually. it only contains 4 cabs
MP_MMS3.5_OrangeUK_Trinity_060811.CAB - setup MMS settings ONLY (doesnt include gprs and wap stuff)
MP_CVSDcpl_20060920.cab - adds the Voice Speed Dial control panel (standard in HTCs rom)
PP_Fix_ShowTodayTheme.cab - Changes the background
PT_WA_Abaxia.CAB - Turns on the Orange Plugin
Everything else is including in the rom itself, the orange sounds, today plugin, colour scheme, icons, programs etc so installing the ext rom wont get these back.
Click to expand...
Click to collapse
I know someone is trying to dump the Orange ROM but haven't seen one posted yet. Perhaps I should be thinking of an alternative? Any ideas?
You might care to try this,it's from the Hermes but works quite well on the Trinity.
I just extract it from my device, but might be localized in French...
This cab seems to be better than just my files and registry export
Many thanks. It installs fine and does the job. Not as good looking as the M700 version but beggars cant be choosers
I've got the files somewhere! They reside in the Application Data folder and are part of the main ROM installation, not extended ROM.
I'll try and find where I put them and repost
Here an archive with registry information and the files.
All the files goes to \Application Data\DIL_APP
Note : as I said earlier this is from a FRE ROM...
As promised, here is an English version.
The DIL_APP folder must go under Application Data, so copy it there first, then copy the orange.reg file to the device, and tap on it in File Explorer to install it.
The Orange.tsk file goes in My Device/Windows and is the main Today Theme file selectable from Settings/Today.
The orange.bmp file can only be installed as part of a ROM manipulation, but is here for completeness!
Superb! Thanks again.
I have the feeling that this today screen slow down the device... just a feeling tho ...
Orange.reg
NeilM said:
As promised, here is an English version.
The DIL_APP folder must go under Application Data, so copy it there first, then copy the orange.reg file to the device, and tap on it in File Explorer to install it.
The Orange.tsk file goes in My Device/Windows and is the main Today Theme file selectable from Settings/Today.
The orange.bmp file can only be installed as part of a ROM manipulation, but is here for completeness!
Click to expand...
Click to collapse
When I copy the orange.reg file and click on it, i get told that i should open the application associated with it and run it from there.
Could anyone help please?
Steve
I've installed resco explorer which does the job...
I don't know if an other free application can do it.
Super Sheep said:
I've installed resco explorer which does the job...
I don't know if an other free application can do it.
Click to expand...
Click to collapse
Worked a treat thanks m8
Steve
Works great on a P3300 ,and doesn't seem to slow down the device much.
hp6915
Can i use this on my HP 6915 ?
Can I have some screenshoot?
Guys , this is an Orange Today plugin , which can I reinstall to an 3600 ?
I installed a new WM6 ROM , and I want to have it back.
How can I do this?
Many Thanks