Related
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
mod edit;
the title has been changed as you did not have a bricked phone...if you ever brick you phone belive me,,,u cant restore it at home.
regards
faria
It's not bricked. As long as you can go into bootloader mode, and flash it with Cingular clean ROM you should be fine..
Have you ever read the note from faria? He said NOT to upgrade to AKU 3.2 without IPL/SPL version 2.xx.
You can try to take out you're SIM card, go to the boot screen by pushing the cam button and the on button and flash it again with te original ROM.
Good luck
Sorry for my bad English
or you can try it this way: link
just go into bootloader (camera button + soft reset) and flash that 1.5 ROM, which is able to downgrade.
and then
!Do !NOT! install any 2.x ROM (like farias ) for the 1.x bootloader (ipl/spl)!
before it you could flash any official 2.x ROM ;-)
I'm pretty sure that this was resolved in another thread and not updated here...
Dr Puttingham said:
I'm pretty sure that this was resolved in another thread and not updated here...
Click to expand...
Click to collapse
You are correct.
--M
(granted there may be a lot of pages to read through to get to the information...but a solution was posted.)
Yes I was pretty sure I saw it resolved in another thread, might have even helped...
Ahh, the joys of posting across threads... makes me feel oh so nice!
Thanks
Thank you friends for all those things.
Things seem to get worse, I couldn't even turn the fone on.I had full charge of batt. before upgrading .After that "accident", i left the fone alone for one night, when i woke up in the morning, tried to turn on the fone but i failed.Tried to enter bootloader mode but failed.The fone now becomes a brick.
-Do you friends know how to revive my fone?
-Do you know where can i have it revived?
Thanks for all!
Leave the battery out for few days, then try again after full charge in BL mode.
TIA
BL Mode????
almozaffar said:
Leave the battery out for few days, then try again after full charge in BL mode.
TIA
Click to expand...
Click to collapse
------------------Thank you very much almozaffar and friends!But how can i full charge the batt. in BL mode?I just have the wall charger as included in the box, a USB cable.What i need in BL mode?
I find no red LED(indicating that the fone's being charge)when i connect the fone with my wall charger as well as with the USB cable.I realise that the batt. gets hot but i'm not sure if it's charged.
Best regards
Someone just told me to remove the batt. for about 2,3 days then recharge, i'm not sure if that works but i'll try.Thank you!
Same problem here!
I have a Cingular 8125, I tried to update it to MDA with IPL/SPL 2.26. I was successfully flashed it. After it turn on, everything work fine, so I turned it off, so that I can inside my sim card. After I inside my simcard, my phone is now can never turn on again. I tried and tried again, there was no used. I plug in the power to the phone, there is no power. When I unplug the power, I see a flash from the screen, or after I remove the battery I see a flash from the screen. I have no idea what it is doing, but i can't turn the power back on. Can some please please help me!
Thanks,
Bricked fone huh? No way!!!
After researching the Wizard, i know how to revive it and do not have to spend a cent!Anyone interested?Please PM me!I'll post later when i have time the whole procedure.
@unknown84: I send u file on how to revive your fone.
How to revive your 8125.
Friends,
First remove your main battery, then plug and unplug the wall charger connecting to your fone, if the RED LED and your Fone screen flash then you can revive your fone(at least it works with my fone,wish you good luck!)
Read these lines carefully before you proceed to the procudure.That really works with my phone(i'm not sure if it works with your fone but i wish you good luck)
*Preparation:
1.Charge the main batt. for 2 hours long.
2.Remove your main batt., charge without the main batt. for 1 minute.
3.Plug and unplug the wall charger for at least 3 times ( main batt. removed) (you'll find that your fone keep flashing, both LED and your Fone screen, by doing this i hope it'll help with waking up the backup batt.)
4.Download the official Cingular 8125 ROM version 2.25(you can find it everywhere)
-Three ways to enter bootloader mode:
a.Hold firmly CAM + Power until Bootloader Mode appears
b.Hold firmly Voice Dial,Rec Button + Power until Bootloader Mode appears
c.Hold firmly CAM + Voice Rec + Power ........
*Procedures to followremember to remove your main batt. before doing hereafter)
1. Hold simultaneously 3 buttons : the CAMERA button, The Voice Recording Button, and the Power button.(or follow one of three ways to enter bootloader mode listed above)
If this doesnt work, do that again by holding those buttons, plug and unplug the wall charger and still keep holding those buttons
(as PLUG and UNPLUG the wall charger, you'll see the Red LED and the screen FLASH, i guess it's the way to WAKE our backup batt UP)
2. Hold those buttons will start the bootloader mode.
3.When your fone's already in the bootloader mode, put the main batt. in
(I'm sure u know what u'll do next if u can start the bootloader mode!!)
4.Unplug your wall charger
5.Plug in the USB cabble connecting to your PC.
6. Start flashing with your 2.25 ROM.
Note: When your fone's in its bootloader mode you can find out if u have a G3 or G4 chipset easily by
looking up at its IPL and SPL. G3 comes with x.xx( ex: 2.25)in both IPL and SPL.G4 comes with x.xx.001 in both IPL and SPL.
If u have a G3 chipset, do as i told u above. If u have a G4 chipset, just download the official ROM for your G4.
Good luck and don't flash again without reading carefully!
battery trick
Congras.
So the Battery trick works. I learned this trick even from motorola phone and apllied it to my 8125.
Now thank you for the newtrick you just detaled us with, appreciate itvery much.
TIA
almozaffar said:
Congras.
So the Battery trick works. I learned this trick even from motorola phone and apllied it to my 8125.
Now thank you for the newtrick you just detaled us with, appreciate itvery much.
TIA
Click to expand...
Click to collapse
=========
You're welcome almozaffar, you did help me with this to find a solution for our users' troubles here.
Thank you too :-D
I have brick
Could you please write for how long did you repeat the steps that you described, before getting BL screen.
THX
Still bricked
It certainly doesn’t work for me. Screen & led flash when taking out usb plug without battery, but that all.
simmilar problem
My HTC Wizard is having simmilar problems but even following these directions, I still cannot revive it.
I know my battery is almost full because when it died it was full. I don't know anyone else with a Wizard so I can't charge it, and this may be where the problem lies: Weather or not the battery is in my phone, whenever I connect wall power, it displays the message "Press send to restore...." and will not charge
When I plug/unplug the wall power with the battery removed, my screen does flash along with the red LED, but only once when I pull the power. Following the directions I have removed the battery and I'm plugging in the wall power jack in an attempt to enter bootloader screen. But just like every time, about three to four seconds after I plug it into the wall, the phone posts the "Press Send to restore factory, blah, blah blah". I don't know if this is part of the problem but it might be.
I've tried almost everything i found on forums, and what I can think of but still to no avail. I can't get my Wizard to enter bootloader mode. I've also tried every method to enter bootloader mode that I could find :/
any suggestions?
Maybe some of you are already aware of this procedure, maybe not.
Anyway, it worked for me and I decided to share how to do it. Simple.
This procedure should only be used in case you really need enter into a bootloader mode and all other ways to do it has failed! Hold Camera button is one of these I am mentioning.
My Wizard was almost bricked at that time and after I speak with an I-mate technical guy, I got the following:
1. Make sure your i-mate™ K-JAM is not Connected to the PC and remove the dummy card or SD/MMC card
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your i-mate K-JAM to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t use the IrDA or Bluetooth for the Upgrade)
4. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
Hope it helps!
this realy worked for my (ex)bricked dutch tmobile mda vario !!!!
tip: REALY make shure that there is no wcescomm.exe running all the time and realy remove the sd card else is nogo
btw: my wizard is CID locked! and works like a charm
Thanks buddy!
I'm happy that worked for ya!
Take care!
I'm having a problem
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Any ideas?
Hi!
Have you already flashed your device once?
Which ipl/spl do you have?
I had problems over 1.05 ROM in the beggining.
If you stuck on bootloader mode, that's a good signal your device is not bricked.
I'd recommend you to disable activesync as you did and reflash it again! Check also if your device is CID unlocked! Search for a thread in the xda developers root.
Try to upgrade to ipl/spl 2.26 first and later to others you want.
Regarding the old file error...can be related to a missing file called enterbootloader.exe.
Hope it works for ya!
Take care
Ironman273 said:
I'm having a problem
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Any ideas?
Click to expand...
Click to collapse
My device is unlocked as I've been trying different ROMs as of late. I had gone back to the Cingular 2.25 ROM for a couple days to sort some things out and was going to flash Farias AKu 3.3 when my power problems happened. My Current IPL/SPL is 2.25
I've tried flashing the TMobile 2.26 but keep getting connection errors. In fact, I've tried flashing with every ROM I have pdviet 3 and 4, CIngular 2.25, TMobile 2.26 and Custom 1.05. Everything (except twice in the custom) gives me connection errors.
Any other trick I can try?
BTW, I used to live in Sao Paulo years ago...
Edit: OK, so I tried the 2.26 TMobile ROM after I typed this and it worked!! I'm back up but I was having trouble with that ROM beause of some incompatibilities with Cingular. I'll go back to Cingular's ROM and play it safe for now.
I believe part of my problem was I kept trying different updates one after the other. Now that I think back, the 2 times I got the update to almost work was after I turned off the device and turned it on again, which is what I did this time around also.
I had the same problems as mentioned by Ironman before. I followed the steps and with a few slight changes, I managed as well to "unbrick" my wiz. THANKS A LOT for the great step by step manual!!!
Still I wanted to know WHY i bricked my device:
I was trying to upgrade to the underground WM6 ROM. I got the same situation as ironman:
Quote:
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Unquote
I then followed the instructions by epimazzo as written above. I also tried the T-Mobile ROM 2.26 which was not working for me. PANIC!!!! Error messag was that I had the wrong Vendor ID. THerefore no upgrade to TMob 2.26 was possible. I tried it then my original qtek ROM in my language and see it worked!!! This IMHO means that I did not put the device in a proper IPL1.xx and SPL 1.xx status which is required for a clean system in irder to unlock it! So if it is bricked, try your native AKU2 ROM and make sure you unlocked it properly. Maybe you have to run the 1.05 ROM for a second time after the unlocking.
I hope this helps you guys.
Sounds great to hear that!
I had play around with pdaviet3, underground and another ROM just today without any problems at all. I don't think that this is the case. Now you get your device back to normal, try to reflash it again. Hope it works this time!
BTW,...São Paulo is a nice city. Thanks! Let me know if you decide to come here!
Take care
Ironman273 said:
My device is unlocked as I've been trying different ROMs as of late. I had gone back to the Cingular 2.25 ROM for a couple days to sort some things out and was going to flash Farias AKu 3.3 when my power problems happened. My Current IPL/SPL is 2.25
I've tried flashing the TMobile 2.26 but keep getting connection errors. In fact, I've tried flashing with every ROM I have pdviet 3 and 4, CIngular 2.25, TMobile 2.26 and Custom 1.05. Everything (except twice in the custom) gives me connection errors.
Any other trick I can try?
BTW, I used to live in Sao Paulo years ago...
Edit: OK, so I tried the 2.26 TMobile ROM after I typed this and it worked!! I'm back up but I was having trouble with that ROM beause of some incompatibilities with Cingular. I'll go back to Cingular's ROM and play it safe for now.
I believe part of my problem was I kept trying different updates one after the other. Now that I think back, the 2 times I got the update to almost work was after I turned off the device and turned it on again, which is what I did this time around also.
Click to expand...
Click to collapse
It seems you got the idea!
You did the right thing! Sometimes, use the official ROM can solve many issues out there!
Keep walking!
enlite_de said:
I had the same problems as mentioned by Ironman before. I followed the steps and with a few slight changes, I managed as well to "unbrick" my wiz. THANKS A LOT for the great step by step manual!!!
Still I wanted to know WHY i bricked my device:
I was trying to upgrade to the underground WM6 ROM. I got the same situation as ironman:
Quote:
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Unquote
I then followed the instructions by epimazzo as written above. I also tried the T-Mobile ROM 2.26 which was not working for me. PANIC!!!! Error messag was that I had the wrong Vendor ID. THerefore no upgrade to TMob 2.26 was possible. I tried it then my original qtek ROM in my language and see it worked!!! This IMHO means that I did not put the device in a proper IPL1.xx and SPL 1.xx status which is required for a clean system in irder to unlock it! So if it is bricked, try your native AKU2 ROM and make sure you unlocked it properly. Maybe you have to run the 1.05 ROM for a second time after the unlocking.
I hope this helps you guys.
Click to expand...
Click to collapse
Excellent post. I messed up with my own cooked ROM and could only get the bootloader screen. Tried the tips here - didn't work first time but I pulled the battery from the KJAM to reset it rather than using the reset button and it worked fine.
In my opinion this thread is so helpful to people who brick their device, it should go "sticky". Mods anything you can do about it?
Thanks buddy! I really appreciate!
We survive here over tips like that!
jt_armstrong said:
Excellent post. I messed up with my own cooked ROM and could only get the bootloader screen. Tried the tips here - didn't work first time but I pulled the battery from the KJAM to reset it rather than using the reset button and it worked fine.
Click to expand...
Click to collapse
Help me similar problem
I upgraded Super Rom, then my Wizard run very slow and no signal (no call out and in- no network at all). And Terible thing is PC could not dectect PPC thought Active Sync. I've soft and hard reset but no use.
So I donot know where to start to re install Rom again.
Please help me....
Hi there!
It seems that you just need to enter into the bootloader mode and reflash it again!
I had similar problems and more during my brick "false" stage!
So, just try to follow my steps here and you should be fine! Once you get into bootloader mode, just use any ROM out there to reflash.
Good [email protected]
thaiphong said:
I upgraded Super Rom, then my Wizard run very slow and no signal (no call out and in- no network at all). And Terible thing is PC could not dectect PPC thought Active Sync. I've soft and hard reset but no use.
So I donot know where to start to re install Rom again.
Please help me....
Click to expand...
Click to collapse
I was about to start a EMERGENCY HELP thread, but I *think* this is the right place instead.
The "touch" of my screen went dead today. It got progressively worse over a few hours, starting with difficulty in using the phone dialer, then random incorrect stuff getting triggered by screen taps.
So I hard reset, and got no response on the fifth alignment cross, meaning 1) "Tap on the screen...; 2) center; 3) top left; 4) bottom left; 5) bottom right. In that I could not proceed with alignment, I hard reset again, and now, at the first alignment screen, i.e. "Tap on the screen...", I have no screen response at all.
I called T-mo, and they are being great about sending a replacement ASAP (and getting me a loaner in the meantime).
BUT, I am running Faria+ AKU3.3 V2... so I clearly have to flash back to T-mo 2.26. I can;t figure out how to do it though, as no matter what I do I am stuck at the first alignment screen!!
HELP!! EMERGENCY!!!
(I have three or four days to get this done, so it's not THAT urgent)
Do a search for Broken Screen. Someone (either in Wizard Upgrading or in the Wizard forum) just had a similar issue with a cracked screen. They downloaded something that allowed them to get around the welcome page.
Actually, if you are just trying to flash a new ROM, don't even mess with it. Go straight to the Boot Loader screen (see the first post of this thread). No tapping necessary until the new rom is on (and that will be the Tmobile then so you would be good.
Thanks for the quick reply. Charging up to green now, and then will try to enter bootloader and flash T-mo 2.26. Will report back.
Worked great. Back to T-mo she goes!!!
BootLoader Mode
Excellent thread but you left out one thing.....exactly how to place your device in bootloader mode.
To clear up any misunderstanding because this is very important....this is how you do it:
Perform a soft reset, when the screen goes blank hold the camera button until a multi colored screen comes up .... That's it !!!!!!
When the unit is connected, USB is displayed at the bottom left.
Well I am a newbie and having a lot of fun upgrading until tonight.... I unlocked the mda vario and upgraded first with official t-mobile version then with the aku 3.3. My mda is a g4 and not cid unlocked, but I managed to load the aku 3.3 with the shelltool.... After I did everything the phone was a total brick... Could connect to pc, couldn't turn. The main page was coming up and giving the version of the mobile but wouldn't do anything else. So I tried pressing the call button and the wireless button and quickly pressed the reboot little button on the side. The screen became green and red, with something else written. When I did that and I tried to upload the software off t-mobile from http://www.tm-phonedownloads.com/download_manager_mda_vario.html, the software sort of recognized, than it asked to disconnect and take out battery. After I had to put back in and the usual start screen was coming up, but as the t-mobile software was asking if the red and green screen was up I repressed the call and wireless button and said yes. After that the phone was upgraded to the firmware off t-mobile and now is working fine again. It was scary though, so think twice before upgrading....
if you follow the instructions properly in the shelltool thread.
http://forum.xda-developers.com/showthread.php?t=293480&page=14
iv attached a tutorial on page 14 of that thread. you should be able to successfully upgrade rom
if anything goes wrong. boot your phone in bootloader mode and use the wizardlove rom to fix it.
i spent 7 hours last nite tryin to upgrade rom in which i mustve recovered my fone liek 6 times using the wizardlove rom
wizard love
yeah same here mucked my phone up the first time then read the instructions followed them and now running underground crossbow edition now have flashed rom about 3 times with different ones if you read the instructions works fine
wizard love saved my phone also
Greetings,
Can you tell me where would i get wizard love rom.
Thanks
hjkl;' why no delete?
hi all,
i uploaded my g3 with this rom Molski.Biz_AKU3.3_21911_8MB_Crossbow.exe. in the beginning everything is normal. it normally finished upgrading. then it restarted automatically, but my g3 didnt open. it shows always bootscreen. ipl and spl both 1.03.
i read almost all forum. when i try hard reset it says "format is ok" but nothings change.
and when i try upgrading with another roms. it gives ERROR 260 NO CONNECTION.
how can i fixed it? pls help me.
read the flashing tutorial..
Start in bootloader
kill activesync *(wcescomm process in taskmanager)
reflash..
BTW WM6 requires 2.X IPL/SPL !!!
If you read almost all the forum, you must have missed a few pages. The reason it won't start up is because you have an IPL/SPL of 1.03. With the phone off and connected to the usb cable, press and hold the camera button and then press the power button. Don't release the camera button until you get a 3 colored screen. That's the bootloader. Now flash an official ROM such as T-Mobiles 2.26 to get your IPL/SPL to at least 2.xx (if you flash T-Mobiles ROM they will be 2.26). After you do that you can flash Molski.Biz's ROM or any other ROM of your choosing.
I just want to add to all the correct things said here that sometimes "No Connection" errors come from low voltage battery. Be sure to have it fully (or almost) charged!
xeno1 said:
If you read almost all the forum, you must have missed a few pages. The reason it won't start up is because you have an IPL/SPL of 1.03. With the phone off and connected to the usb cable, press and hold the camera button and then press the power button. Don't release the camera button until you get a 3 colored screen. That's the bootloader. Now flash an official ROM such as T-Mobiles 2.26 to get your IPL/SPL to at least 2.xx (if you flash T-Mobiles ROM they will be 2.26). After you do that you can flash Molski.Biz's ROM or any other ROM of your choosing.
Click to expand...
Click to collapse
i did all what you said. ecxept trying the t-mobile 2.26 rom. coz i couldnt find it. i got 3 colored screen and i tried another rom and it gives sama error (260 ERROR) it is look like has no connection so rom update couldnt find ppc
Look here for T-mobil 2.26
http://forum.xda-developers.com/showthread.php?t=310831
no it didnt work. as i said when in 3 colured screen, there is no connection between my computer and ppc. so it always gives same error: ERROR 260. it says "no connection" check usb cable etc.
by the way there is no problem with usb cable.
i think there is another method to rom update. can i copy any rom to my sd card by using ntrw.exe.
do you think it is work. if it is so, can anyone explain me details
thnx
hi forum members(people who have the best knowledge about pocket pc).
i dont know what i did but my wizard is working now. i did what i alwyas did before, i mean in serial mode i tried to update wizard, today i want to try again then it is ok.
thnx for helping....
hi guys i got a mda vario v t-mobile (htc tp2) dutch version i think because im from the dutch ehhehe. anyways im gettin trouble with install a other rom or updating this version...i know t-mobile rom sucks so i really wanna get this one off because the new roms rule the whole manila thingy clock thingy and stuff.. can anyone help me?
ye i forgot 2 tell that when i try 2 install the flash it gives me a error (260) its saying that i got connection problems but i think that might be wrong because i already tryed it out on a different pc... and i know i have 2 shut down my anti-virus programme
on my htc i get a warning(this package is not intended for your device type!! high chance of bricking!!! exiting now
I'm not sure what you're trying to flash, but check out the sticky threads. If you want a ROM other than that specifically designed for your device, your first step is HardSPL. Check out the sticky HardSPL thread, and if you have problems with it, then post in that thread.
well im trying 2 flash(hard-spl) my device HTC TOUCH PRO2(T-MOBILE VERSION VARIO V) i already downloaded the right rom for my device its the ENERGYROM FOR HTC PRO2. but when im trying 2 flash it with the hard-spl it says a error (260)(this package is not intended for your device type!! high chance of bricking!!! exiting now. and when im trying 2 install the ENERGY ROM for my device it stays on 0% of installing:S
tnx anyways
The fact that the ROM flash is staying at 0% is because you haven't got HardSPL. You need to get HardSPL on first.
I wonder if HardSPL can't handle the MDA Vario V ? What model number does it say it is, if you take out the battery, something like "RHODxxx" where the "xxx" is three digits, near where the serial number is ?
You really should post this in the HardSPL thread though.
ye thats why came with the hard-spl later on and even than it wont install the hard-spl. it says RHOD100
thank you for your support
1. Turn off your phone.
2. Connect USB with the PC (on the back on PC if not laptop)
3. Press Volume down + power button together on your phone (4 colored screen, red, blue, green and white should came up)
4. Connect usb to your phone. (should say usb in the middle of white part of the screen)
5. Start hard-spl.
6. When finished. remove the battery.
7. Put the battery back on
8. repeat 3 and 4
9. Start flashing "task 29".
10. repeat 6 and 7
11. repeat 3 and 4
12 start fleshing energy rom.
When you finish all adjusments turmno ff the phone, remove the battery for 5 minutes then start using your phone.
good luck
forster said:
1. Turn off your phone.
2. Connect USB with the PC (on the back on PC if not laptop)
3. Press Volume down + power button together on your phone (4 colored screen, red, blue, green and white should came up)
4. Connect usb to your phone. (should say usb in the middle of white part of the screen)
5. Start hard-spl.
6. When finished. remove the battery.
7. Put the battery back on
8. repeat 3 and 4
9. Start flashing "task 29".
10. repeat 6 and 7
11. repeat 3 and 4
12 start fleshing energy rom.
When you finish all adjusments turmno ff the phone, remove the battery for 5 minutes then start using your phone.
good luck
Click to expand...
Click to collapse
Erm, that's not going to work if HardSPL is bombing out with a "wrong device" error. But this discussion is going on in the HardSPL thread too.
May be you are not using the correct version of HardSPL? There are the CDMA and GSM versions. You should check which one your phone needs. Hope that helps
ye im using the correct hard-spl from the gsm thread.
ow ye
btw when i bootloader under the RHOD100 is writtin SPL-087.0000 that means theres already hard spl installed?
Please stop posting your questions in two places at once ? The HardSPL thread is the right place for your questions on HardSPL
please post your questions about hardspl in the appropriate thread, thread closed.